Script problem with CC 2014

hi,
i have a problem i try to put a new screen. Freebies — Mt. Mograph from there but when i download the file on os i have to change the jsxbin in jsx to see the icon jsx, then i put the script in ui scrpt panel but nothing happen i dont see it when i'm opening my AE ?
what's wrong with it??

Just to be clear.
If you put jsxbin script to Scripts folder or to Scripts -> ScriptUI Panels it runs OK both from File->Scripts and Window - > "script name".jsxbin.
However, if you do File -> Scripts -> Run Script File.... AE does not recognize jsxbin file and shows it greyd out. For that I have to rename those jsxbin files to jsx.

Similar Messages

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Hello.
Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
Eg ftp.domain.com:21
Please try the 2 suggestion above and let me know if it works.
Regards
Vivek

TOC/Script problem with Netscape

I am using RoboHelp (webhelp) 5.5.
I am facing two problem with netscape browser.
1. loading the page itself take long time and show a message
that script on this page is causing mozilla to run slowly.
2. in the TOC when i click the TOC BOOK the content of the
page inside that book is opened in new tab page in the same browser
instant

Hello Robo_Rajesh,
Welcome to the forum.
As a start point, I would suggest you check the following on
Peter Grainge's web site for an explanation.
Click
here.
Hope this helps.
Brian

VB Script Problems with Windows Vista Ultimate

I have iTunes 7.0.2.16 and when i try to update it i keep getting a message that says:
"iTunes could not be installed becasue visual basic script (VB Script) is not installed or has been disabled. make sure VB Script is installed, turn off script blocking in anti-virus and personal firewall software, re-register VB Script, then install iTunes."
I even get this message when i try to unistall iTunes. I completly uninstalled my antivirus software and removed all firewalls, but i wasnt able to fix the problem.
I visited the iTunes and QuickTime for Windows cannot be installed without Visual Base Script (VBScript) section for help, however, it was unable to solve my problem.
I currently have Windows Vista Ultimate and have been looking for a fix for a while now...any help would be greatly appreciated...
thanks
Other OS Windows Vista Ultimate
Other OS Windows Vista Ultimate
Other OS Windows Vista Ultimate

Hey rrijeka,
Unfortunately, Vista is currently not compatible with iTunes.
This article: http://docs.info.apple.com/article.html?artnum=305042 will tell you more about the iTunes and windows Vista compatability. The article will also be updated when itunes and Vista are compatible.
Jason

Scripting problems with pipes!

Hi Boardies!
I'm working on a script to automatically generate PKGBUILDs for my custom kernels (For my 3 systems I need 3 custom kernel packages).
Each PKGBUILD needs the md5 checksum block, which I can generate with "makepkg -c > PKGBUILD".
Here is the problem
This command writes the checksums at the end of the PKGBUILD file. This isn't a clean solution. The checksums should wrote before the "build()" function.
Because of that I need a trickly bash command, which search (grep maybe?) the "build() "-line and writes the md5-checksum block before that line.
I tested around with egrep, but I can't isolate the line-number of "build()" and I don't know how to paste the md5-checksums be at the position (line - 1)!
I hope somebody can help me. Thanks for your answers
Best regards,
Flasher

A simple perl script would be appropriate. The easiest way to approach this problem (actual perl programmers feel free to correct me) is to do the following:
iterate over the file, pulling each line into a string appended to an array
iterate over the array, printing each line. If build() is matched, print md5sum, then the line.
write the corrected file to stdout
Here's one I called test.pl
#!/usr/bin/perl
#Add MD5SUM to file
#Read from stdin into @file
while (<>) {
chomp;
push(@file, $_);
foreach my $a (@file) {
if ($a =~ /build/) {
print "MD5SUM\n";
print "$a\n";
Then the following command:
cat PKGBUILD | ./test.pl > temp
mv temp PKGBUILD
Produces an identical PKGBUILD with the word MD5SUM printed on the line above build().

Problems with Pr 2014

Updated to 2014.
In general, nice improvements.
But:
1. Rendering dynamically linked Ae clips takes FOREVER. Often freezes, have to restart Pr.
2. When playing through unrendered dynamically linked Ae clips, playback won't stop. Keep hearing playback for 10-20 seconds.
3. When trimming cuts with trim shortcuts, Pr often freezes; have to restart.
4. 'Auto Save' to Cloud does NOT work -- keeps telling me I need to install CC desktop, which obviously I have done.
Is it just me?

Hi,
I have none of these problems (tested all 4). I'm using windows 8.1. The auto save to cloud works for me, I have CC still installed, i just changed the prefs/files/folder location in the Creative cloud app and it auto saved to the cloud correctly. What are your system specs?
Cheers
Chris

[InDesign C# Script] Problem with textframe.place(imageName)

Hi everyboy !
I am beginning with the InDesign Scripting in C#, and the documentation is very poor. I have a problem and I can't find the solution.
I have to place an image into a textframe on my document's page.
I create my textframe without any problem :
           myDocument.Layers.Add();
        InDesign.Layer lastLayer = (InDesign.Layer) myDocument.Layers[myDocument.Layers.Count];
        InDesign.TextFrame myPicture = myPage.TextFrames.Add(lastLayer, InDesign.idLocationOptions.idUnknown, myPage);
        myPicture.GeometricBounds = new string[4] { myY, myX, myY2, myX2 };
Then I try to place my Image, but I can't find which type of object is returned by .Place méthode :
First try :
InDesign.Graphics myGraphic = (InDesign.Graphic) myPicture.Place(pathName, false);
And I have got this error :
{System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'InDesign.Graphics'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{C85A4AB3-9492-4C40-8A7B-F8305706C8B8}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
   at Service.createPhotograph(XmlNode photo, Page myPage) in c:\Documents and Settings\melaniep\My Documents\Visual Studio 2005\WebSites\WebSite6\App_Code\Service.cs:line 204}
And I saw this tutorial in javascript for placing images at http://www.adobe.com/devnet/indesign/pdfs/indesigncs4_scriptingtutorial.pdf
//Display a standard open file dialog box to select a graphic file.
var myGraphicFile = File.openDialog("Choose a graphic file");
//If a graphic file was selected, and if you didn't press Cancel,
//place the graphic file on the page.
if((myGraphicFile != "")&&(myGraphicFile != null)){
var myGraphic = myDocument.pages.item(0).place(myGraphicFile);
//Since you can place multiple graphics at once, the place method
//returns an array. To get the graphic you placed, get the first
//item in the array (JavaScript arrays start with item 0).
myGraphic = myGraphic[0];
So I tried :
InDesign.Graphics myGraphics = (InDesign.Graphics) myPicture.Place(pathName, false);
            InDesign.Graphic myGraphic = (InDesign.Graphic) myGraphics[0];
But I have got the same error.
Someone have an idea? I am really lost, and I don't know what to do :'(
Another little question.
My picture is smaller than my textFrame.
And I want my picture fits to the texframe.
MyGraphic.HorizontalScale = widthOfTextFrame
MyGraphic.VerticalScale = heightOfTextFrame
Does it works? Or Am I in the wrong way?
Thank you very much (and sorry for my bad english, I am french )

Are you also beginning with C# ? Then please reconsider, and follow tried paths with JavaScript - plenty more support around here. You could at least write a draft of your program, and only if it works move it to C#.
To get further on your issue, I'd follow the idea outlined here:
http://msdn.microsoft.com/en-us/library/ms173183(VS.80).aspx
If that does not work, I'm sorry - last time I used C# is years ago, and targeting some pocket PC. No InDesign involved.
Dirk

Live ID sign in problem after script problem with ...

I am again having to sign in to WLM Live ID after each reboot.
I first came across this problem when the Yahoo Toolbar was upgraded. See thread:
http://community.bt.com/t5/BB-Speed-Connection-Issues/BT-Toolbar-installer-ongoing-problem-STILL-ONG...
The script error "fix" has again changed the HKEY_USERS registry entry!
I really am at a loss to understand why BT can't get its head around this.
[HKEY_USERS\S-1-5-21-796845957-926492609-725345543-1003\Software\Microsoft\Windows\CurrentVersion\Exp lorer\User Shell Folders]
AppData = %AppData%
The problem here is AppData should actually be the following
AppData = %USERPROFILE%\Application Data
So when MSN or other apps that use that registry key go to save their data it gets lost.
So the solution is simple, run regedit and go to
[HKEY_USERS\S-1-5-21-796845957-926492609-725345543-1003\Software\Microsoft\Windows\CurrentVersion\Exp lorer\User Shell Folders]
and modify/set the value AppData to a data value of %USERPROFILE%\Application Data

I just had a look at the relevant forum http://forums.adobe.com/community/labs/widgetbrowser?view=discussions&start=0; but no help there either.
To give you an idea, I was having the same problem, I could not log in. Despite that, I did have the most up to date widget in my browser, the one that dates back to 01/13/2012. Since then, no more widgets have been added.
Along with ADDT and Spry I guess that the widget browser has become the next casualty.
You can still use the browser, just be careful in the knowledge that the newest widget is already one year old.

TA21328 every time I use Safari I receive a message that says Safari is no longer responding because of a script problem with the website and I must press "continue" for the page to continue. This happens with every website I go to. What is wrong with my

When using Safari I have begun to notice this box appearing as I try to reach any website: "Safari is no longer responding because of a script on the webpage and then it lists what ever web page I have tried to reach. It then asks me if I want to "stop" the script or allow it to continue. I must "continue" it in order to reach my web page/ If I press "stop" it just keeps coming back and back and I can't continue. What is wrong with my computer or Sarari or both?

chick --
Does it mention "Slow Script?

Installation problem with January 2014 iTunes update

I have tried repeatedly to install the January 2014 update but have not been successful. All previous updates have gone smoothly, so don't know why this update is so troublesome. Right now, I cannot access iTunes due to these difficulties. I am running Windows 7 Professional (64-bit) on a Sony VAIO laptop. Here are the troublesome pop-up messages that appear during the install:
"Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. Abort-Retry-Ignore"
"Microsoft Visual C++ Runtime Library - Runtime Error!! - Program C:\Program Files (x86)\iTunes\iTunes.exe - R6034 - Application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Same C++ message appears for iTunesHelper.exe
"iTunes was not installed correctly. Please reinstall iTunes. - Error 7 (Windows error 1114)"
I have tried to install by selecting "Run as Administrator" but received the same error messages. Has anyone found a solution to fix this problem update?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article: http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

Invoice List SAP script - Problem with SAP script functionality

Hello Friends,
I am working on SAP script - Invoice List SD_INVOICE_LIST. The invoice list contains the underlying billing documents. As per the standard functionality, in the line items, its printing the underlying billing documents with the net value. My requirement is to dig these line items into another level, meaning, I need to display the line items of billing documents as well(like material, material description, quantity, net price and net value of that item etc).
The billing linte item informatin is stored in VBRP table and the VBRP structure is not at all defined in the print program of SD_INVOICE_LIST (I.E.RVADIL01). Change of standard SAP program is not an option for me here.
In the external subroutine we can fetch these line items for each billing document in the invoice list. However, my question here is how to take these line items back to the sap script and print them in SAP script (We can print one line item but how to loop these fetched lines and print them on SAP script. Any help in this regard would be greatly appreciated.
I think there is no standard smart form exist for the invoice list. Please also let me know if there is any standard smart form available for INVOICE List.
Thanks in advanace for any help in this regard.
Best regards,
Siva

Hi
As you cannot change the standard, you will have to see if there are any enhancements provided in the print program. if not you have to copy into a custom one and do changes accordingly.
Thanks,
Venkatesh

Chaining 2 Ecatt Scripts Problem with Parameter

Hi,
I'm trying to chain two scripts VA01 and VA02 using a new script via REF command.
The result of VA01 (Sales Order number) is being passed as export parameter to VA02 but in the replay I can see it go into VA02 but subsequently being replaced with the default value from the VA02 script i.e. the value used when recording this script in the first place. The script then fails.
Any help thanks

Venkat,
Thanks for the reply but still no joy with your suggestions
In VA01 I have export parameter E_SALES
In VA02 I have import parameter I_SALES
In the 3rd linked script I have local parameter V_SALES
I pass E_SALES value to V_SALES and then V_SALES to I_SALES in the 3rd linked script
The value of I_SALES in VA02 does not come from the linked script as it should do. In the replay I can see the correct value go into VA02 but then overwritten with the value of parameter I_SALES in VA02 script.
any other ideas?
thanks

I updated firefox hoping to stop a script problem with tabs, but it is still happening. When I go to close a tab at times I get a script error message. After choosing stop script, individual tabs won't close until I restart firefox.

This is what the box says when it happens...
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://browser/content/tabbrowser.xml:1628

-> Update All your Firefox Plugins
* https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
* Restart Firefox
Check and tell if its working.

Problem with recent 2014.1 release and SVG rendering. This happens on Safari and Chrome

This issue didn't happened on previous versions since I tested the same project but with an older version developed with edge animate CC 2014.0

Can you attach a sample composition so that we can check out the issue.

Scripting problems with upgraded project file

Hello,
I hope someone can offer a bit of help on this one. I have a v3 project file that I upgrade to v4. I decided to add a "return to menu" script to this project file. 3 scripts to set GPRM 0 mov to 0,1,2 for three different menus. And a final Jump script to Jump to Menu 1 if GPRM 0=0, Jump to Menu 2 if GPRM 0=1, Jump to Menu 3 if GPRM 0=2.
This doesn't work - won't work in simulator nor on a build. I suspect that the culprit is the upgraded project file. I made a new v4 project file and replicated these same exact scripts and behold! It works!
So I figured out that it's the upgrade project file that is the reason why these scripts won't work! Very disappointing.
But now, what can I do short of rebuilding this project all the way from scratch?!?
It's too bad you can't open 2 projects and copy and paste from one into another.
Using DVDSP 4.0.3
Dual 2 ghz G5 Mac OS X (10.4.5)

If you'd like to strip out the project assets (video and audio) and use .pict images as place holders instead, then send me the file (with the place holders), I'll happily take a look at it for you. It should be working fine, and I suspect there is something small we have both overlooked.
There are no real issues with projects from v3 going on to v4 where scripting is concerned - the scripts are identical. There will be something else going on here...
Just to be sure your scripts are:
mov GPRM1, 0
Jump MainMenu // your actual menu name is here
then
mov GPRM1, 1
Jump SceneSelection1 // again, your actual menu name is in here
and
mov GPRM1, 2
Jump SceneSelection2 // and again for the menu name
Then your final script reads:
Jump MainMenu If(GPRM1 = 0)
Jump SceneSelection1 If (GPRM1 = 1)
Jump SceneSelection2 If(GPRM1 = 2)
The first script is the start up item for the disc, the second and third scripts are set as targets for buttons on the main menu (which means the script is run before the footage plays) - the last script is set as the menu call and end jump for the track.
You are sure that you are correctly re-setting the GPRM each time you move between menus?
If this simple scripting system isn't working then there is going to be a reason for it besides the upgrade... send me the file, I'll have a look. Alternatively, have a look here for downloadable stuff, and find the zip archive called 'Chi-Ho Lee', which is a simplified PAL version of how I think you should have this set up.

Script problem with CC 2014

Similar Messages

Maybe you are looking for