Script runs not corrextly for first time

Hello,
i have kind a strange problem.
Always wenn i run my script first time (after opening Diadem), it works not corretly. Specificly creating a report goes wrong.
When i start the script for second time (and each additional time) everything works fine and correctly?!
For understand:
- I do some (mathemtical) analyse - always works correctly
- Load/Append prepared ReportLayout, add curves, create text objects - doesn't work for the first time, then it alwas works correctly
The mistake is, that all curves (that should be in several appended layouts and text objects) are added in the first loaded report sheet (though the reportsheets were appended)
As i said, when i start the script second time (and each additional time) everything works fine as it should?!
Thanks
Solved!
Go to Solution.

Hello,
yes i tryed with debugger step by step. No errors. Ironically with debugger step by step everything works fine (even for he first time)
It looks like, when i run the script for the first time, the appended report sheets are not active, because all curves are added in the first report sheet.
But why works it wrong only for the first time and then everything works fine?
Thanks

Similar Messages

Getting error 36331 while running prebuilt etl for first time

Hi all,
I have installed BI apps 7.9.6 and OBIEE 10.1.3.4.1, DAC 10.13.4.1 on a Linux machine with Oracle 10gR2 as data base and EBS 11 i as the data source. I am running the prebuilt ETL for the first time for a new execution plan created with Financials-Receivables subject area added to it. Of the total 292 tasks 30 tasks run well and the ETL fails after that with the following error.
The following error message is from the DAC server log. I have seen the session logs and workflow logs for the SDE_ORA_CodeDimension_Supplier_Payment_Method task, but could figure out what could be the issue. Please let me know if any one has encountered the same issue.
=====================================
ERROR OUTPUT
=====================================
524 SEVERE Tue Sep 22 06:41:14 EDT 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Supplier_Payment_Method
525 SEVERE Tue Sep 22 06:41:14 EDT 2009
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Supplier_Payment_Method
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
Thx
RM

Found that the indices on tables are failing to be created while running the workflow. I have updated the status of the task as completed and re queued the task. ETL ran successfully then.

Custom url scheme not working (for first time) IOS applicaiton

i have created one distribution application also register custom URL scheme. First time after I installed application, and try custom URL link, it does not work.
However if I lunch the application manually it will prompt me below mentioned message
Are you sure you want to open the application ... from the developer iphone distribution ... ?
i will click on continue, and after that custom URL link works fine with my application.
Can Custom url link launch the application directly on installation (without manually launch application and contiue)?
is there any settings, so we can make the prompt message off. So it will not prompt message.
also i had tried to create new application from another enterprise account, and deploy on other server; then it do not prompt that message, but unable to figure out the reason .
Thanks

Are you exactly following the guidance in the iOS App Programming Guide for Implementing Custom URL Schemes? Do you get the same message the first time, no matter whether app has been loaded or not? Are you really using iOS 4 per your profile?
"If your app is not running when a URL request arrives, it is launched and moved to the foreground so that it can open the URL. The implementation of your application:didFinishLaunchingWithOptions: method should retrieve the URL from its options dictionary and determine whether the app can open it. If it can, return YES and let your application:openURL:sourceApplication:annotation: (or application:handleOpenURL:) method handle the actual opening of the URL.

Trying to run Vertex vprtmupd for first time

I am trying to run the Vertex vprtmupd for the first time on a fresh install on Linux. I am on 11.5.10.2 and have run the "Quantum Program Update Installer" with no problem ran great!
I tried to run "Quantum Data Update Installer" and it failed with this error:
HR_6882_HRPROC_ASSERT
LOCATION py3vntsetup:2
APP-PAY-06882: Assertion failure detected at location py3vntsetup:2.
Cause: an internal error has occurred at location py3vntsetup:2.
Action: please contact your Oracle customer representative.
I then tried to run it manuly by running "vprtmupd" and this is what happened:
Select a Monthly Update Function
1. - Update Payroll Tax Database
2. - Exit Program
Select: 1
Beginning Payroll Tax Monthly Update Process.
Enter Data Source: /u01s/app/oracle/appl/pay/11.5.0/vendor/quantum/data
Unable to establish connection with the Payroll Tax Database. Verify the
information entered and retry.
Press Enter to continue...
WARNING! The update process will destroy the contents of the
current database before it creates a new one. Please make
a backup before proceeding.
Any idea? It seems like I need the tax database created before the "vprtmupd" program will work. How do you create the tax database for the first time?

Chris,
The same error is reported in the following docs, please review it and see if any is applicable.
QuickPay Fails with HR_6882_HRPROC_ASSERT, APP-PAY-06882: Assertion failure Detected at Location py3vntsetup:25 [ID 242952.1]
VERTEX: Troubleshooting Document [ID 1059679.1]
Payroll/Quickpay - APP-PAY-06882: Assertion failure detected at location py3vntsetup:1c [ID 315195.1]
QuickPay Error APP-PAY-06882: Assertion Failure Detected At Location Py3vntsetup:1d [ID 1186805.1]
Vertex/Quantum Troubleshooting Guide [ID 735986.1]
After Patch 5366666 Quantum Update Data Installer Fails With APP-PAY-06882 [ID 399182.1]
After ''Rapid Clone'' Payroll Fails With HR_6882_HRPROC_ASSERT [ID 368124.1]
After YE 2008 Phase 1 Patch 7259999, Quick Pay Fails with HR_6882_HRPROC_ASSERT [ID 742556.1]
Thanks,
Hussein

Deatail Region in OAF Table - Show not responding for first time click

I have added a detail region to my OAF results table. A link for 'show' appears for each record of my results table. When I click Show for a purticular record - the page refreshes, The control is going to Process Form Request but nothing is happening.
If I click the 'Show' for the second time for a purticular record ,Show functionality works and I could see my detail section under that record and the Hide functionality works fine too. Please advise if that is how it is suppose to behave or if we can change any property of the table to make it work for the firest time.
Thanks, Pradeep

Pathi,
Please try to have the WhereClause in the VO query as part of static definition itself. So you would only need to bind the parameter and execute the Query.
Try and let me know if that helped.
Thanks
Sumit

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Lov is not validating when i open a form for first time

hi all,
i am using form6i.
i have one multi record block. in which lov is attached to it.
but when i open the form for first time the item corresponding the above said is not showing and if i enter the value then also its not validating against. its showing error frm-40210
but when i click on other item and come to this item Lov is showing.
what could be the reason for this strange behaviour.
i have checked set_item_properties too(there is properties have been set)
Please advice.
Thanks..

FRM-40210: Search string not found.
what could be the reason for this strange behaviour.Do you have an "Initial Value" set for the item? Do you have the "Validate from list" property set to yes or are you setting the initial value through code?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Tried to trim a video clip for first time iOS 6 trimming in progress last 10 hours. Not responding cant access photos. Help

Tried to trim a video clip for first time iOS 6 trimming in progress last 10 hours. Not responding cant access photos. Help

Reset your device by pressing the home button along with the sleep/wake button until you see the apple, then let go.

HT4859 i have setup an ipad without connecting to computer, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to i

i have set up my wifes ipad mini wirelesly, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to itunes will it give me an option to restore from icloud, i dont want to lose the apps and data my wife has already installed through her account... any thoughts

1. set up as new
2. transfer you wife's purchases.
3. Just in case create one computer back up manually.
Enjoy.

Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?

Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?

Have done both suggestions, still not working. Could it have somehting to do with my local network? I am using a wireless Internet provided by my apartment building so not sure if apple tv and my computer are not technically on the same "local network?"
apple tv and main computer are connecting to Internet fine. Just cannot see my itunes on apple tv.
any other advice? My itunes is turned on to home sharing. i entered the same apple itunes account into aple tv. but appletv keeps saying my computer's home sharing is not turned on...but it is.

HT204380 help. tried for first time to use FaceTime with another iPhone user & it would not work. "FaceTime failed". we are both on wi-fi networks & iTunes accounts are set up correctly.

help. tried for first time to use FaceTime with another iPhone user & call refused to connect. Call would dial, allow us to accept call, then error message "FaceTime failed" would appear & call disconnect. we are both on wi-fi networks, both phones have updated software & both enabled FaceTime with iTunes logged in. don't know what else to do to get FaceTime to connect. Someone please help.

Thanks Helen for the response. At least you can get some of the contacts to work. Absolutely none of mine will. Feel like my phone is cheating me out something it should do. Think I'm going to just have to dump all the Apple products in general because this phone hasn't worked right since I got it.

Long time to open workbook for first time

Hi,
I have a workbook with three queries . Performance of workbook is good when it was created for first time. It has additional 22 sheets with formulas and other sheets with values based on query sheets.
The problem starts after I close the existing session and open in another session when it takes 15 to 20 minutes to come up.But after that the book is slow even for single click button action.
Version of analysis 1.4.6
Win 7(64 bit)
Ms office 2010(32 bit)
Refresh on opening is disabled.
Few thing which I did:
>> I opened up task manager and did analyze wait chain, I found that excel.exe is waiting for splwow64.exe process.
>> I enabled logging at "debugging information" in support setting for workbook and checked things out in log file.
Found that
There was warning "AddSerializer failed (Command processors not initialized)
Looking at log file for events when book took time to open, I found that time stamp gap between following events"
-verbose: Working mode as serialized in document:'Local'
-verbose: Successfully deserialized system info from workbook XML
- verbose: ...its logs various properties of queries like query name,id etc"
and its immediate previous event of cache formula string is 20 mins.
>> in another session I opened a workbook with normal performance.Found above mentioned warning message and deserialization... information.
the difference in this case is that there is not delay in events.
Has anybody faced this issue? Any idea on deserialization of workbook xml in analysis.
Any idea where is metadata saved in analysis. is it in form of some hidden script object just as in BEx 7.0
Thanks
Pramod.

Hi Pramod,
Since you have several sheets in this workbook, have you checked the number of custom styles?
Please check the SAP note http://service.sap.com/sap/support/notes/1899658
According to the note, too many styles slow down Analysis for Office.
The note also contains a macro that you can run on your workbook to delete the custom styles if you want to check.
Regards,
Filipe

Performance issue in browsing SSAS cube using Excel for first time after cube refresh

Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.

Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do?

Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do? Previously hit "organize", ran for 25 min till hit 100%, then "had to close"?

Unfortunately, there's not enough info listed to give you an effective answer.
Can you give more detailed system spec's. There are a lot of differences in RAM, & Hard Drive Technologies. Is your 2TB a single hard drive, or multiple drives in RAID? While a single 2TB drive is nice for the storage capacity, they also sacrifice some performance to reach that capacity... What speed is the RAM, & I'm assuming it's properly opperating in Dual Channel mode (watch your POST screen to be sure). Which Core i7 CPU are you running, & what Operating System are you running. Finally, bring up your task manager, & see what processes are using CPU cycles. Also, are you starting up PrE8 through the default shortcut which uses the Welcome screen?
A quick guess is that Auto Analyzer & the Welcome screen are behind your troubles, but can't be sure till more info is available.
There is a current thread about Auto Analyzer, & I've posted a way to bypass the Welcome screen in several threads.
See my post in this thread to bypass the Welcome screen http://forums.adobe.com/thread/516524 (2nd post in thread)
Message was edited by: chaosdsmFL - added link

Script runs not corrextly for first time

Similar Messages

Maybe you are looking for