Script TAB position issue

Hi,
I have an issue in creating Tab position under Paragraph section. I have to display a column like which 10 character length and it is numeric value and also it needs to right justified.
if i make the tab right justified .. will system start printing it from right to left or left to right? this is my question.

Hi,
if it's right justified it will work as below,
say you have a tab format
P1 5CM Right justified,
in this case it leaves 5CM from the left side of your window & then starts printing from RIGHT TO LEFT.
say if it's left justified output is,
>--5CM---->TEST
right justified output will be,
>----
>TEST.
>--5CM>
hope this helps.
Regards,
Raghavendra

Similar Messages

Script(tab positions)

hi to all,
help me in this issue
i have defined a paragraph format and tab postions for 7 colums
and in main window i have assigned that paragraph format but the paragraph format is not working.
for amounts can i kept as (R) for right alignment of amounts but it is also not working the amounts r not aligned.
thanks in advacne
kiran kumar

hi,
did u give like this
Assume DP is ur paragraph format
DP ,,&itab-v1&,,&itab-v2&,, and so on
define tabs as follows
1 5.00 cm left
2 10.00 cm left
don't think that if u give right it is assigned to right like that
left means from left it move to the 5 cm position and then display at that position ,right means from right corner it will adjust the alignment
better to define all tabs either to left or right to avoid confusion,it takes some time time to ajust properly,activate the code before u test
do assign points if it helps you

Script Paragraph Format-TAB position Problem....

In Script- Medruck , There is a line:
IM   ,,,,,,Qty. ,,Unit   ,,Deliv. date ,,,,&ETUHRTXT&
where IM is a paragraph format with TAB positions at:2,3,23,24,34,40,51,57.
what is the meaning of ,,,,,,Qty ????
what is the difference in writing :
IM ,,Qty,,Unit,,Deliv. date,,&ETUHRTXT&                                 AND
IM   ,,,,,,Qty. ,,Unit   ,,Deliv. date ,,,,&ETUHRTXT&
How would the Display look like??

Hi Srikar again,
If you are putting one tab position after every field, in this case count tab position from the starting i.e. from first variable and go on countin till end . This will take you adding position one after other and it will not overlap.
e.g. Mat,,qty,,price
and tab position as 1 : 5 2: 10 3: 15 4:20
then mat will start at 1 to 5 and qty will from 10 onward.
Regards,
Vijay

Indent /tab position for text from INCLUDE texts in SAPscript

Hi, ABAP colleagues!
Need your help on this sapscript problem: How to align texts taken from "INCLUDE TEXT" in SAPscript, according to tab defined in Paragraph Format?
Or, how to control tab positions for texts which were extracted from INCLUDE text commands in SAPscript?
I defined a paragraph format with tab stop at 8 CH so that with 2 commas (,,) my text will be displayed there. However it always appears to the left (e.g. 1st column) and not indented at the proper column for description/text (e.g. which is in second column).
Pls help, bec a different heading and information is not acceptable to client for the Thailand characters.
Above is the description of the problem. Below are some technical details.
For specific example, I am editing Zversion of standard sap MM form MEDRUCK Window Main - Text Element Item Text.
BG ,,&TTXIT-TDTEXT&
/: INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID&
/: NEW-PARAGRAPH BG
So far, tried these approaches:
PARAGRAPH
NEW-PARAGRAPH
LANGUAGE '2'
THANGSAN font
Any ideas?
Thank you so much in advance for all your help. Our project team will really appreciate it. May the Lord bless you as we go through our SAP work!
Sincerely,
Celeste

Hello Caleste,
Please let me know what settings you have done to solve this issue.
Help me with steps for Spool Request/Print settings.
Regards!!
Surya

Sapscript - Paragraph Format - Tab space Issue

Hello Experts,
I'm facing issue with the Tab Space Alignment in the Paragraph Format.
I'm giving these values for a Paragraph Format Tabs:
Tab Position:
1: 0,10 CH
2 :3,50CH
3: 6,50CH
12: 76,00CH
Inspite of reducing the TAB position for 5th Tab; it is still aligning a bit far.
And whenever the Description (Field 3) is longer; all the Values are pushing towards right.
Alignment is not getting adjusted. How can I make this as Fixed?
Here's the screenshot:
Please advise.
Thanks & Regards,
Sowmya

Hi,
For Standard Text, Paragraph format will be applicable from Standard Styles which will be creating in Transaction code SE72 and apply that Paragraph Format to Text in Standard Text transaction code SO10 then the Paragraph format will be applicable. And transport the Created Style in SE72 to Quality and Production Systems.
Apply the Created Paragraph format created in SE72 to text by below steps:
So10>Provide text>Click on CHANGE>Click on MENU FORMAT>Change Style->Double click on STYLE created in SE72-->Apply the newly created Paragraph Format to text in So10
Edited by: Venkatmani29 on May 2, 2011 12:43 PM

Find Tab position

Hi All,
I need to find the tab position and alignment, and change the following:
1. Change the first tab in the paragraph (Left align tab into Center align tab)
2. Change the second tab in the paragraph (Left align tab into Right align tab)
Before script:
After Script:

Hi Chinnadk,
Excellent Stuff!!!!!
But there is a small confusion, what I explain in the above thread.
Please refer the below screenshots:
After using the below script:
var paras = app.activeDocument.stories.everyItem().paragraphs.everyItem().getElements();
for(var i=0;i<paras.length;i++)
    var tabstops = paras[i].tabStops;
    if(tabstops.length>1){
        tabstops[0].alignment = TabStopAlignment.CENTER_ALIGN;
        tabstops[1].alignment = TabStopAlignment.RIGHT_ALIGN;
Output looks likes:
But the Final Requirement is,
1. Extend upto the end of textframe
2. Equal space between the three entry
I need a script for the following things only
Once again Great thankful, If you help for this request.
Could anyone help for this complex task?
Thanks for All
Siraj

Re: script tabs

Hi,
I am facing one problem with the script tabs. I have to print three text columns.
20,30,40 lengths of three columsn.
how to set the tabs to fix the lengths of teh columns and how to write it in the script editor.
rgds
p. krishna prasad

Hi Krishna,
In your form create a new paragraph format. In that paragraph format got to TABS option and mention the required lengths and their positions in the tab positions provided. In the window in which you want to use these tabs write two commas without any space.(,,). This represents a tab positions. Suppose you want to print v1 , v2 and v3 in the three tab positions defined write as ,,&v1&,,&v2&,,&v3&. This will print v1 value at first tab position , v2 in the second and v3 in third tab position.
Thanks and Regards,
Bharat Kumar Reddy.V

All scripts are missing from scripts tab

I dont know why but all the scripts that were in my scripts tab are missing. This happened once before and I found a fix but cant locate the steps to that again. I remember it had something to do with backing up a few files and have ID recreate them or something. Any ideas?

Follow this link and try resetting your indesign prefrence.
Shonky

Script tab info req??

hi
i had an req like to display in format the quantity with there values below them:
              quan1      quan2     quant3     quan4      quan5
value:        10            11          12           13            14
my above line is displaying like this,but below line is coming:
value:             10               11            12            13
14
i want to take this in same line,below there respective quantity lables.pleae tell how to do?
also when i make a para p7,the TAB option in that shows only 3 tabs,tell what to do,if fileds in a line are 5,6,than how to give tab spacing b/z them.
my code:
P8           INVOICE VALUE:
=           &DTL2-MENGE&,,&DTL2-RATE&,,&DTL2-RATE1&,,&DTL2-RATE2&,,&DTL2-VALUE&
tabs in P8
1. 2cm
2. 3cm
3. 4cm.i am not very much clr with this tab funda,plz explain me.
regds

This is how tab concept work in SAPscript or in Smartform.
Go to your paragraph format and click on tabs.
Now define all your tab scpaces here.. Since you have 5 variable your can define either 5 or 4 tab spaces, for your undertanding I will define 5 tab spaces, let us assume our paragraph format is AS
Tabspaces: for paragraph AS
Tab Position        Alignment
0.2   CM             LEFT
1.2    CM             LEFT
3.7    CM             LEFT
5.5    CM             LEFT
6.5    CM             LEFT
Now inside your window call you paragraph format with tab spaces with all your variables as shown below
AS ,, &variable1& ,, &variable2& ,, &variable3& ,, &variable4&,, variable 5&
In above ,, --> represents tab spaces
since, before variable 1 we have given a tab space as shown above it will print at 0.2 CM position from window start and second variable will print from 1.2 cm from start of window and 3rd variable will print at 3,7 CM from start of window and so on...
Close the thread once your question is answered.
Regards,
SR

Tab position change at runtine of tab canvas

Dear gurus,
Is it possible to change tab position of tab canvas at runtine in 10g forms?
George.

Gerd: Thank you very much for your advice.
I will explain my situation. I have a form : INV. This has got three tabs : Header, Detail and Expenses. Some users prefer to see Header as the first tab while others want to see Details and still others like to see Expenses.They have their logic - what is important to that particular user he wants to see as the first tab.
These preferences can be set in a different table(by an admin user) and can be applied once when the form opens and not during the runtime.
Since tab order change facility is not available in forms, I need to apply the logic in a different way - activate the tab that each user prefers to see as the form opens regardless of the tab order.
Hope you understand my case.
George.

SAP script printout alignment issue

Hi Experts,
I have facing one Script Printout Alignment issue.
SAP Script Form printing some Values in Table format.
While debugging( in debug mode ), I am getting the correct Alignment ( Proper table format with values ).
But in printout the Alignment( The vertical and horizontal lines are not printed properly ) is not correct.
Thanks in Advance.

HI Glen Anthony,
I am not using any printer details.
from the Spol (SP01) I am checking the print priview.
Success in debug mode but not in Print.
Please suggest.
Thanks

Possible false positive issue with SigID 3353

Here is a packet captured by the IDS that triggered SigID 3353 - SMB Request Overflow
evAlert: eventId=1075708170032493259 severity=high
originator:
hostId: cisco-ids-v4.1
appName: sensorApp
appInstanceId: 1134
time: 2005/07/18 14:53:30 2005/07/18 14:53:30 UTC
interfaceGroup: 0
vlan: 0
signature: sigId=3353 sigName=SMB Request Overflow subSigId=0 version=S180 Malformed SMB Request
context:
fromVictim:
000000 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 ................
000010 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 ................
000020 01 00 00 00 00 00 00 00 00 00 00 68 FF 53 4D 42 ...........h.SMB
000030 25 00 00 00 00 98 07 C8 00 00 00 00 00 00 00 00 %...............
000040 00 00 00 00 00 50 78 07 01 90 81 0C 0A 00 00 30 .....Px........0
000050 00 00 00 00 00 38 00 00 00 30 00 38 00 00 00 00 .....8...0.8....
000060 00 31 00 2C 05 00 02 03 10 00 00 00 30 00 00 00 .1.,........0...
000070 0A 00 00 00 18 00 00 00 00 00 00 00 00 00 00 00 ................
000080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
000090 00 00 00 00 00 00 00 68 FF 53 4D 42 25 00 00 00 .......h.SMB%...
0000A0 00 98 07 C8 00 00 00 00 00 00 00 00 00 00 00 00 ................
0000B0 00 50 78 07 01 90 C1 0C 0A 00 00 30 00 00 00 00 .Px........0....
0000C0 00 38 00 00 00 30 00 38 00 00 00 00 00 31 00 2C .8...0.8.....1.,
0000D0 05 00 02 03 10 00 00 00 30 00 00 00 0B 00 00 00 ........0.......
0000E0 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0000F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
fromAttacker:
000000 00 00 00 00 00 54 00 2C 00 54 00 02 00 26 00 0F .....T.,.T...&..
000010 70 3D 00 00 5C 00 50 00 49 00 50 00 45 00 5C 00 p=..\.P.I.P.E.\.
000020 00 00 00 00 05 00 00 03 10 00 00 00 2C 00 00 00 ............,...
000030 0A 00 00 00 14 00 00 00 00 00 01 00 00 00 00 00 ................
000040 BB E2 9E 20 19 4C 0D 4B B7 17 DF 44 B9 00 52 40 ... .L.K...D..R@
000050 00 00 00 80 FF 53 4D 42 25 00 00 00 00 18 07 C8 .....SMB%.......
000060 00 00 00 00 00 00 00 00 00 00 00 00 00 50 78 07 .............Px.
000070 01 90 C1 0C 10 00 00 2C 00 00 00 54 05 00 00 00 .......,...T....
000080 00 00 00 00 00 00 00 00 00 54 00 2C 00 54 00 02 .........T.,.T..
000090 00 26 00 0F 70 3D 00 00 5C 00 50 00 49 00 50 00 .&..p=..\.P.I.P.
0000A0 45 00 5C 00 00 00 00 00 05 00 00 03 10 00 00 00 E.\.............
0000B0 2C 00 00 00 0B 00 00 00 14 00 00 00 00 00 01 00 ,...............
0000C0 00 00 00 00 15 FD E7 ED 7D DD E4 40 8A E9 7C 39 ........}..@..|9
0000D0 30 15 BC C3 00 00 00 80 FF 53 4D 42 25 00 00 00 0........SMB%...
0000E0 00 18 07 C8 00 00 00 00 00 00 00 00 00 00 00 00 ................
0000F0 00 50 F0 06 01 90 00 0D 10 00 00 2C 00 00 00 80 .P.........,....
participants:
attack:
attacker: proxy=false
addr: locality=IN 10.24.238.193
port: 1071
victim:
addr: locality=IN 10.24.4.42
port: 139
alertDetails: Traffic Source: int0 ;
As you can see, looks like a pretty normal SMB packet. This sensor is on an internal network, so Windows file and printer sharing is the norm.
I think there is a false positive issue that was introduced with the signatures tuning via the S180 update. As a result, I have two questions:
1) Am I right, or is the signature working as it should?
2) Is anyone else having this problem?
Any and all feedback will be greatly appreciated,
Alex Arndt

The new version of this signature should be included in the S182 update. As a workaround if you are using 5.x you may to create 2 meta signatures using this signature and the no-op sled signatures (3328 for better coverage create a meta associated with each one and the existing sig). In your component list be sure to set 3353 prior to 3328. Set unique attackers to 1, meta interval to 2, and component list in order to true. This should eliminate all benign triggers.

SAPscript - Tab Position need more info

Greetings.
Could some one help me to explain the purpose of the tab position and what is SIGN mean for Alignment attributes.
In the tab position we can declare many TAB position, if we declare Number -1 Tab Position -17.00 CM Alignment - SIGN
is it mean when we put , is it the position of the characters will be at 17cm from the left?
Thank you.

Hi,
If you give the First tab position as 14 & 2nd Tab position as 17 c.m., it mean the first printing text starts at 14 C.M. and 2nd text starts from 3C.M.(17-14) next to 1st Tab Position (14c.m), i.e., the difference betn 1st Tab & 2nd Tab will 3 c.m.
NOTE: Always any tab position starts from Origin not from the previous tab position.
U dont need to give 2 couple of comma's for 2nd tab position.
Eg:
If you want the Text2 at 2nd tab position, u have to print like below:
P1 ,,text1,,text2
If you want the Text1 at 2nd tab position, print like below:
P1 ,,,,text1
Hope its clear!!
Rgds,
Pavan

Tab positions in sapscripts

I am trying to change a paragraph format such that the tabs contain positions and so the text is displayed starting at a specific position in the document. But adding the tab positions is not moving the actual text. What could I be doing wrong?

CP is the paragraph format
CP        Contact Person                  LEFT           0,10 CM    0,00 CM
15.00 CM          LEFT
This is how I am using it
CP           &acc-sydt&,,&acc-contact&,,&PAGE& / &sapscript-formpages(2)&
This is the window it is been used in
DATE       Date, Your contact and page    9,70 CM   2,00 CM 10,00 CM   1,00 CM
Now I would expect the contact text to start from 15.00 cm. But it does not, it starts right after the date

Indent here with left indent changes tab position

I have a sheet set up with a left indent and then a bunch of tabs.
e.g.: Course #, Course description, then a set of eight tabs with dates
The course descriptions are twice as long this year and so I was using indent-to-here (because there are rules below, and shift-return pushes the rule below under the second line only). But the tabs don't line up. They are "looking" at the left indent and making an adjustment - if I increase the left indent then the tabs associated with the indent-to-here line move left (the bigger the left indent the further left they are from the tab position)
Why?
Why would anyone want that to be the default behavior?
I can fix it with a second para style, but it breaks the association between the two lines of the description and now requires manual updating in the future, instead of a simple indent-to-here substitution.
I'm just wondering why this happens, seems completely counter intuitive - tabs should always align!

Will: As you can see by the screenshot it's easily "solved" with a second style, my reason for writing is why is this happening? - is this a bug that needs to be reported to Adobe? I don't understand why an Indent Here (given a left Indent), would change the primary attributes of tabs (i.e. lining-up!)
Peter: Prefs trashed; happens on any/all docs; CS6 (8.0.2). [You are setting a left indent, and then using the Indent Here (Cmd\)??]
Anyone else able to recreate?
Appreciate the replies.
Em

Script TAB position issue

Similar Messages

Maybe you are looking for