Script to know the HR pacakges and functions owned by the HR schema

Hi,
Is there any script to find out the HR Packages and Functions owned by the HR Schema?
Thanks you
--Kumar

Hi Thierry, i figured it out.
Thanks a lot
Message was edited by:
user539616

Similar Messages

Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?

Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?
I have been looking at my data at the position indicated by the function as a peak, and it is correct at that place the wave has its peak, but the value provided by the function is higher than the actual value at that point.
Attachments:
Test.jpg ‏53 KB

The help makes it clear that the VI will make a quadratic fit to the data, so the locations are not integers (i.e. not aligned with you exact data). From that analysis, the peak is between two of your points, and slightly above the neighboring data.
See the coercion dot. Make the "locations" array DBL (Why did you change it to I64, that makes no sense at all!)
Quote from the help:
"Locations contains the index locations of all peaks or valleys detected in the current block of data. Because the peak detection algorithm uses a quadratic fit to find the peaks, it actually interpolates between the data points. Therefore, the indexes are not integers. In other words, the peaks found are not necessarily actual points in the input data but may be at fractions of an index and at amplitudes not found in the input array."
All clear?
LabVIEW Champion . Do more with less code and in less time .

HT203421 I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps. Does anyone know what is happening

I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps. Does anyone know what is happening here? Even updating an older game app resulted in the original game icon changing to the new identical icon that all new apps are appearing with. This new icon is like a page with a ruler, pencil and paintbrush. Any tips on how to stop this or how to revert to the icon as it appears on the app store would be appreciated.

https://discussions.apple.com/thread/6132949?tstart=0

HT4759 My iCloud email address and my apple ID are different. I would like to change my iCloud to be the same as my apple ID. However I don't know my iCloud password and don't use the email address it belongs to. When I try to change the password, apple b

My iCloud email address and my apple ID are different. I would like to change my iCloud to be the same as my apple ID. However I don't know my iCloud password and don't use the email address it belongs to. When I try to change the password, apple brings me to a page to reset my apple ID password (which I know and don't want to change). I have even tried to delete my iCloud account completely to start again but am not allowed without the iCloud password (which I don't have) there doesn't seem to be a place to change the email address of iCloud. What can I do?

This is the answer that I had expected, so in this case you could only change your gmail.com address to another providers email addres e.g. outlook.com, yahoo.com, etc., but you won't be able to change the gmail.com address to a icloud.com email address. Apple just won't let you do that.
Your iCloud account with @icloud.com email address and you Apple ID with gmail.com address are already connected and as I said before, Apple just let you merge this two IDs together.

I have been backing up my photos to an external hard drive. I usually choose the photos, copy and paste them to the EHD. It has started saying "an item named "unnamed.jpg" already exists in this location. I don't know what to do.

I have the MacBook OS X 10.5.8, 2.4 GHz, 2 GB. I have been backing up my photos to an external hard drive since I purchased it. I usually choose the photos, copy and paste them to the EHD. It has started saying "an item named "unnamed.jpg" already exists in this location. Do you want to replace it with the one you're moving? Don't replace/Stop/Replace". I don't know what to do.

Thanks Jim, I kind of thought that was the answer, but was hoping against hope that I was just missing something. Like I said, it's not a big problem. One work around I've found is to name a folder on the external hard drive the same as the name I give the folder to import to and then choose this folder to back up to. I still get a subfolder inside that folder named Imported on...... but at least it's in the folder with my chosen name.
Thanks again,
Jack

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
Reset the PRAM and the SMC, which might contain personal information.
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari. I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows. Does anyone know how to get those buttons back

The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari. I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications. Does anyone know how to get those buttons back? I guess I could just switch betwen appliations, but I am used to doing it the other way.

You're welcome
You had Safari in full screen mode.

I know the user name and password but forgot the secret question

I know the user name and password but forgot the secret question

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.@

TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I recently got the iPhone 4S and for some reason the Settings button for the home screen has a little red 1.If anyone know why their is little red number1 and what I have to do it would be fantastic! Thanks :)

I recently got the iPhone 4S and for some reason the Settings button for the home screen has a little red 1.If anyone know why their is little red number1 and what I have to do it would be fantastic! Thanks :)

Hallo. I did it this several times and I have the latest update to iOS 6.0.1, but still the red mark 1 at the Settings icon. Do you have any other idea?
Thank's.

Hi, I forgot my email and password and my iphone need to activate i dont know what to do and i cant remember the email address or the password please help me I dont wanna lose my phone :(

hi, I forgot my email and password and my iPhone need to activate i don't know what to do and i cant remember the email address or the password please help me I don't wanna lose my phone.

IF you forget your email and password and you are stuck in the activation process, it usually gives you a clue on what is your email like w********[email protected] If you really own the phone, you already have a clue on what is that email add. Then go to appleid.apple.com, click on manage my device, enter what you think is your email addy (no harm in trying that it wont lock) then click on i forget password. This will give you an option to either sent the password to an alternate email. If you have several, then sad to say you have to open it one by one and check including your spam mails. Another option is to answer some security questions you made while creating an apple id. Your last option is to call apple support. If you know the email add and you can prove ownership, they can reset the password for you

HT1918 I dont know my security questions and am unsure what the email address is on my account as the reset option

I dont know my security questions and am unsure what the email address

If you can't figure out the email address, you need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(95663)

Before updating my iPhone 4S, I could double click the home button, and delete all of the previously opened apps. I am not able to figure out to do that now, after installing the latest update. Does anyone know how to do this?

BEfore updating my iPhone 4S, I could double click the home button and delete all of the previously opened apps. After updating, I am not able to figure out how to do this. Can someone tell me how to do this? Thank you.

After you double click the home button you swipe up on the app screenshot.

When I turn on my iMac it comes up with the icon which I then log into. The password works and I then get the apple icon and the spinning wheel. After a minute it turns into a prohibited icon. If I log on the guest icon I get to Safari. Help!

When I turn on my iMac it comes up with the login icons which I then choose and log into. The password works and I then get the apple icon and the spinning wheel. After about a minute the Apple icon turns into a prohibited icon. However, if I log in under the guest icon, I can access the wifi and get to Safari. I really don't know what to do next. Any help would be gratefully appreciated.

Are you running any A-V? If it's an iMac 21.5, I don't think you're running Leopard, 10.5. Probably at least Snow Leopard, 10.6. This is the Leopard forum.
This article says meant for 10.3.9 and eariler, but contains some still useful suggestions.
http://support.apple.com/kb/TS1411
Try a Safe Boot. Shift at the startup chime and expect a much longer time to boot. This will bring you to a login screen with "Safe Boot" in red.
Look at this as well.
http://support.apple.com/kb/TS1417

TS2755 I am trying to find a message from 2012 and when I load previous messages it only goes back so far then the program quits and sends me to the home ( main) screen. How can I find the message and get around this?

I am trying to access a message from early 2012. When I load previous messages It will only go back to oct 2012 and then the program stops and kicks my to the home page. Anyone know how I can get to the message? Thanks.

Try Spotlight Search
1. From any Home screen page of iPad, drag your finger down anywhere on the center of Home screen.
2. Spotlight search will now appear and you can search for apps, texts, or any other content you'd like just as you did on previous versions of iOS.

Script to know the HR pacakges and functions owned by the HR schema

Similar Messages

Maybe you are looking for