Script to send email with the filename of the file just added to a folder?
Hi,
I have an AppleScript set into an Automator workflow which will send me an email when a file is added to a folder.
What I would like to have happen though is have the email include the file name of the file that is added to the folder
tell application "Mail"
set theNewMessage to make new outgoing message with properties {subject:"New File added", content:"File", visible:true}
tell theNewMessage
make new to recipient at end of to recipients with properties {address:"[email protected]"}
send
end tell
end tell
I'm new at the whole AppleScript thing, but I'm getting how powerful it can be.
Thanks for any help.
Maybe something along these lines...
*set theBody to text returned of (display dialog "Enter message text here " default answer "")*
*set theSubject to text returned of (display dialog "Enter subject here " default answer "")*
*set theTarget to text returned of (display dialog "Enter recipient's email address here " default answer "")*
*tell application "Mail"*
*set newMessage to make new outgoing message with properties {subject:theSubject, content:theBody}*
*tell newMessage*
*make new to recipient at end of to recipients with properties {address:theTarget}*
*set sender to "[email protected]"*
*end tell*
*send newMessage*
*end tell*
Regards, Andrew99
Similar Messages
-
Shell Script to send email with .txt file as attachment
Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!978334 wrote:
Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!http://bit.ly/XHfSCz
https://forums.oracle.com/forums/search.jspa?threadID=&q=sendmail&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Send emails with attachments residing in the network
Hi All,
My requirement is to send email with attachments. I am using javamail and it works fine only if the attachment resides in the local machine.
If the attachment resides in the network [the folder is shared by the user], the application gives me IOException.
Please help. Let me know if I am not clear.Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message -
Script to send email with user-friendly fields
I like to make a script to help a friend who is not very computer fit (old).
Working in an email programme is already challenging to him.
So I have the following script:
set theBody to "Hallo etc"
set theSubject to "Subject etc"
set theTarget to "xxx2zxy.com"
tell application "Mail"
set newMessage to make new outgoing message with properties {subject:theSubject, content:theBody}
tell newMessage
make new to recipient at end of to recipients with properties {address:theTarget}
set sender to "[email protected]"
end tell
send newMessage
end tell
and this works. Where I get stuck (lack of knowledge) is that I would like it to come up in a window with 3 boxes (one for the text, one for the subject and one for the email address). So all he has to do is write in those 3 boxes and hit OK.
Can anybody help me here?Maybe something along these lines...
*set theBody to text returned of (display dialog "Enter message text here " default answer "")*
*set theSubject to text returned of (display dialog "Enter subject here " default answer "")*
*set theTarget to text returned of (display dialog "Enter recipient's email address here " default answer "")*
*tell application "Mail"*
*set newMessage to make new outgoing message with properties {subject:theSubject, content:theBody}*
*tell newMessage*
*make new to recipient at end of to recipients with properties {address:theTarget}*
*set sender to "[email protected]"*
*end tell*
*send newMessage*
*end tell*
Regards, Andrew99 -
I'm trying to find out how to send emails with java - without using the java mail api - i've been told there is a way to do it but i cant seem to find it - any help on this would be gratefully recieved as i'm totally stuck! :(
Ok, I expanded on it a little bit. Still probably isnt totally correct.
String localhost="yourdomain.com";
String sendMailHost=�mail.domain.com�;
int portNo=25;
String from="[email protected]";
String to="[email protected]";
String message=�Message Body.�;
Socket s = new Socket(SendMailHost,portNo);
DataInputStream in = new DataInputStream(s.getInputStream() ) ;
PrintStream out = new PrintStream(s.getOutputStream() ) ;
out.println("HELO " + locahost);
out.flush() ;
in.readLine(); //ignore response
out.println("MAIL FROM: " + from);
out.flush() ;
in.readLine(); //ignore response
out.println("RCPT TO: " + to);
out.flush() ;
in.readLine(); //ignore response
out.println("DATA");
out.println(message);
out.println(�.�);
s.close(); -
Email with attachment as an excel file
Hi,
Do you have any ABAP example that can send email with attachment as an excel file? Please help, thanks!Hi,
Please search in the Forum and you will get N number of threads for this. -
How to send an email with an attachment to the customers email address.
Hi friends,
How to send an email with an attachment to the customers email address.
the attachment will be in doc format.
Having an Header
the data which i am sending must be in a TABLE format
with 5 columns.
and each column must have a column heading
Please guide me.
Thanks in Advance,
Ganesh.*& Report ZEMAIL_ATTACH *
*& Example of sending external email via SAPCONNECT *
REPORT ZEMAIL_ATTACH .
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver .
*Here get the values of mail from the table adn6 for the customer address.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'DOC'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat. -
System cannot find the path specified when sending emails with attachments
I've had an on going issue for some time on one of my clients whereby users will intermittently get this error "The System cannot find the path specified." when they try to send an email with an attachment.
The issue seems to arise generally (though reportedly not only when) when someone creates an email and attaches a file but leaves it for some time before finishing and sending.
The staff run in a Windows 2008 R2 full Terminal Server desktop environment on Office 2010 (32-bit 14.0.7140.5002) and several staff have reported the same issue.
I have been able to replicate the issue in their environment by creating an email and leaving it for some time.
After a fair bit of scouting around I found that if I monitor the temp directory that the attachments get placed into (content.outlook under Temporary Internet Files on user profile) and found that the directory with the attachments would disappear after
a period of time which would then cause the error where obviously Outlook could not find the file that had now gone.
I don't know of any Outlook settings that would cause this and the issue isn't related to temporary Internet files filling up as I've recreated the error on a user account where there is nothing else stored in the Temporary Internet Files.
To work around the issue I have changed the reg file that tells Outlook where to place these files (HKCU/Sofware/Microsoft/office/14.0/outlook/security - OutlookSecureTempFolder) to a location in the users home drive.
This appears to resolve the problem however I am noticing 1 issue with this. Unlike the temp folder which gets purged after a file is no longer required, the location I've changed it to does not clear out old files.
While it shouldn't be too difficult to add a script that can clear the files at log off it would be good to see if anyone may know what the cause of the problem in the first place is. I would rather it work as it should than have to bodge around changing
the folder and scripting file deletes.
Does anyone know of what maybe causing the attachments and content.outlook folder to disappear?
thanksDo you have any redirected folder in your environment? Is the original Temporary Internet Files folder stored on a server?
Basically, the attachments remain in the Outlook Secure Temporary File folder if we exit Microsoft Outlook while email attachments are open. See:
http://support.microsoft.com/kb/817878
Flynn -
Hi,
i am trying to have such kind of functionality, so that if any servers in sharepoint farm failed then it will send notification email to specific user that server is not able to ping or failed. Right now following script is working but it sending mail either
servers are all running or dead. But i would like to send email only if any of the server failed to ping. what i need to modify following code to work.
Thanks in advanced
#### Provide the computer name in $computername variable
$ServerName = "localhost","Dc-XX"
$smtp = "ExchChange"
$to = "[email protected]"
$from = "[email protected]"
$sub = " Server Status"
$body = @"
##### Script Starts Here ######
foreach ($Server in $ServerName) {
if (test-Connection -ComputerName $Server -Count 2 -Quiet ) {
$body += write-output "$Server is alive and Pinging `n"
} else { $body += Write-output "$Server seems dead not pinging `n"
$body
send-MailMessage -SmtpServer $smtp -To $to -Subject $sub -Body $body -From $fromyou need to put a check on the send-mailmessage if no ping fails then exit else send the email with message.
also try this script, performing the the same thing but more granular way
http://gallery.technet.microsoft.com/scriptcenter/d0670079-6158-4dc5-a9da-b261c70e4b7d#content
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Trying to send email with contents in the body of the message
Hi,
Has anyone been successful in modifying the RW_EMAIL_NOTIFICATION script in such a way that allows the contents of the email "body" to be sent as a parameter from a calling script? Thanks.
Regards,
David CarrDavid,
Here is the solution I use which hopefully will suit your requirements and is a little more elegant than the workarounds for using rwmail. Oracle has the ability to send SMTP emails once you enable the UTL_SMTP package.
Log in to Oracle as the SYS user and run the Oracle supplied script to create the UTL_SMTP package - utlsmtp.sql in the Oracle rdbms/admin directory.
Now create a procedure that you can call subsequently in your scripts to send emails using the UTL_SMTP package. I created this script under the SYSJCS schema as I'm only going to call it from there, but you could create it as SYS and then create a public synonym for it.
I called my procedure send_mail (see below). The enabling of the UTL_SMTP and the creation of the send_mail procedures are one-offs and don't have to be repeated (unless you want to change something about send_mail). Just change the name of the mailhost in the procedure to one appropriate for your company.
NB: I have had to substitute the "at symbol" with *at* otherwise the forum wouldn't accept the post.
CREATE OR REPLACE PROCEDURE send_mail (
pSender VARCHAR2,
pRecipient VARCHAR2,
pSubject VARCHAR2,
pMessage VARCHAR2) IS
mailhost CONSTANT VARCHAR2(30) := 'yoursmtpcapable.mailserver.corp';
crlf CONSTANT VARCHAR2(2):= CHR(13) || CHR(10);
mesg VARCHAR2(1000);
mail_conn utl_smtp.connection;
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
mesg := 'Date: ' ||
TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss') || crlf ||
'From: <'|| pSender ||'>' || crlf ||
'Subject: '|| pSubject || crlf ||
'To: '||pRecipient || crlf || '' || crlf || pMessage;
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, pSender);
utl_smtp.rcpt(mail_conn, pRecipient);
utl_smtp.data(mail_conn, mesg);
utl_smtp.quit(mail_conn);
END send_mail;
Now you can call the send_mail procedure with, e.g.
send_mail(pSender=>'redwood**at**mycompany.com',pRecipient=>'basisteam**at**mycompany.com',pSubject=>'Alert: Redwood job failure',pMessage=>'There has been a job failure that should be addressed a.s.a.p.');
Here is a practical application of this email facility. I created a trigger for ON_JOB_STATUS_CHANGE called _ERROR and here is the code that is executed. We store contact details for business users that need to be notified of a job failure in the Comment field of the script definition, so for a failed job we grab that info and email it to a power user dlist which includes 24/7 Ops that will call-out the contacts specified.
Any Comment field that starts with the text CRITICAL_JOB results in an email to the Ops that will perform the call-out, otherwise the email goes to a less critical dlist.
procedure SYSJCS.ON_JOB_STATUS_CHANGE_ERROR (
p_job_id in integer
, p_old_status in varchar2
, p_new_status in varchar2
is
v_script varchar2(30);
v_step_id varchar2(9);
v_description VARCHAR2(80);
v_comment_text VARCHAR2(4000);
begin
if p_new_status in ('E', 'O') -- Error or Console
then
select script_name, decode(step_id, null,'JOB/CHAIN','STEP')
into v_script, v_step_id
from jcs_jobs
where job_id = p_job_id;
select description, comment_text
into v_description, v_comment_text
from jcs_scripts
where name = v_script;
if ( SUBSTR(v_comment_text,1,12) = 'CRITICAL_JOB' )
then
send_mail(pSender=>'redwood**at**mycompany.com',
pRecipient=>'criticaljobalerts**at**mycompany.com',
pSubject=>'CRITICAL ALERT: Job failure in '||v_script||' ('||p_job_id||')',
pMessage=>'Job Description: '||v_description||chr(13)||chr(13)||'Operations Team please ensure you contact one of the following people via telephone a.s.a.p.'||chr(13)||chr(13)||'Comments: '||chr(13)||v_comment_text);
else
send_mail(pSender=>'redwood**at**mycompany.com',
pRecipient=>'basisteam**at**mycompany.com',
pSubject=>'Alert: Job failure in '||v_script||' ('||p_job_id||')',
pMessage=>'Job Description: '||v_description||chr(13)||'Comments: '||chr(13)||v_comment_text);
end if;
end if;
end;
Hope this was useful.
Regards
Guy -
Send email with PDF attachements (Smartform/SAP script)
Hello All,
I have 3 existing programs A, B & C whose output is in SAP Script/Smartform. Now I need to create new program D which needs to execute program A, B & C and then convert their smartform/SAP script output into PDF format and send email with attachements (PDF files). Any pointers how I can proceed. Thanks a lot.hi Sarita,
v_ctrlparams-no_dialog = 'X'.
v_ctrlparams-getotf = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Smartform name'
IMPORTING
fm_name = v_func_mod.
CALL FUNCTION v_func_mod
EXPORTING
control_parameters = v_ctrlparams
IMPORTING
job_output_info = v_joboutput
TABLES
t_nonsigner = t_nonsigner.
fill the document
doc_chng-obj_name = 'Descriptoipn'.
Fill the subject line
doc_chng-obj_descr = 'Manpowe'.
doc_chng-obj_descr = 'Reminder .
doc_chng-sensitivty = 'P'.
Fill the content of the mail
objcont = 'Dear all,'.
APPEND objcont.
CLEAR objcont.
APPEND objcont.
CLEAR objcont.
objcont =
'The manpower sign-off is pending for the list of employees as per th' &
'e attached sheet.'
APPEND objcont.
CLEAR objcont.
APPEND objcont.
CLEAR objcont.
objcont =
'Please click on the following link for the manpower sign-off:'.
APPEND objcont.
CLEAR objcont.
APPEND objcont.
CLEAR objcont.
DESCRIBE TABLE objcont LINES entries.
READ TABLE objcont INDEX entries.
doc_chng-doc_size = ( entries - 1 ) * 255 + STRLEN( objcont ).
Creating the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = entries.
objpack-doc_type = 'RAW'.
APPEND objpack.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
LOOP AT v_joboutput-otfdata INTO wa_otfdata.
APPEND wa_otfdata TO objbin.
CLEAR wa_otfdata.
ENDLOOP.
DESCRIBE TABLE objbin LINES tab_lines.
objhead = 'NonSignerDetails.otf'. APPEND objhead.
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'OTF'.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = 'NonSignerDetails'.
objpack-doc_size = tab_lines * 255.
APPEND objpack.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objcont
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
hope this will help u..
regards,
Santosh Thorat -
On my Mac Pro, when I send emails, it always gives me the option of adding an attachment with a paper clip.
Today, the paperclip has vanished. What do I do ?
Simonhttp://www.apple.com/support/mail
-
I have 2 email accounts, the second i only just recently added, i was able to send an email from this account after i added the account but am not able to send anymore emails. It says "unable to send email with selected server" there are no other servers to choose from. please help! TIA
Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden -
I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
GailI had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.
-
When i send an email with greek characters in the body, many recipients (not all) cannot read it.
At the same time when i use the internet mail it can be read successfully by the recipient.
I have already checked the encoding settings in the Fonts in order to be "unicode (UTF-8)".
What else can i check?
Thanks in advance.
e.g:
From: Eleni Kontomari [email address removed by moderator Andrew]
Sent: Thursday, February 27, 2014 12:33 PM
To: "Nikos Totsios (Ηλεκτρονική διεύθυνση)"; "Giannis Diokarantos (Ηλεκτρονική διεύθυνση)"; "Dimitris Papadopoulos (Ηλεκτρονική διεύθυνση)"; Vassilis Gounaris; "Vassos Efthymiadis (Ηλεκτρονική διεύθυνση)"; Νικηφόρος Κεκρίδης; Ιωάννης Αθανασόπουλος; "Alexis Katsivas (Ηλεκτρονική διεύθυνση)"; Μιχάλης Παπαοικονόμου; Fomesa Hellas; "Χρήστος Σπηλιάδης (Ηλεκτρονική διεύθυνση)"; Δημήτρης Μπενάκης; "Ν. Γαλάνης"; [email protected]; "Αποστόλης Σαμούδης (Ηλεκτρονική διεύθυνση)"; "Β. Ντουρτόγλου (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]; "Φοίβη Λεγάκι (Ηλεκτρονική διεύθυνση)"; "Παναγιώτης Κουμεντάκος (Ηλεκτρονική διεύθυνση)"; Σπύρος Ζαφείρης; Hans- Joachim Henn; "Κώστας Αλεξανδρόπουλος (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]
Subject: ΠΡΟΣΚΛΗΣΗ ΤΑΚΤΙΚΗΣ ΓΕΝΙΚΗΣ ΣΥΝΕΛΕΥΣΗΣ ΕΣΥΦ
... 13 2014.
''Please read [[Forum rules and guidelines]] when posting a question in a public forum''There are some language add ons that support emails from other languages that you can check out: [https://addons.mozilla.org/en-us/thunderbird/extensions/language-support/?sort=popular]
The recipient, if they also use thunderbird may need to have a language pack to read the email: [https://addons.mozilla.org/en-US/thunderbird/language-tools/]
You may also need to have them check their interpreter to make sure the email is being received in the same format it is being sent.
Maybe you are looking for
-
My images do not show up on my published website.
I am a beginner in Dreamweaver (having only made one other website 3 years ago in college). I have my images in my Assets folder, I place the image in dreamweaver, save it, test it, and it works fine. But when I "put" my website on the internet, my i
-
Hello, I noticed something really strange going on. At the moment if i use 1 finger on my trackpad it will register my mouse movement but i cant click or tap. 2 - 3 - 4 finger gestures do work so the hardware is not failing but i think the software i
-
Hello, At times, I keep getting this error of unable to find class for bean even though, the definition I used for the Bean in the jsp page is as follows: <jsp:useBean id="deptbean" class="avt.DepartmentHandler" scope="session"/> The Error I get is "
-
Re: Using the sourceforge jffmpeg plugin to play mpeg2
I didn't know jffmpeg that existed but I've been thinking about creating a binding to ffmpeg of my own. Will you publish you're results anywhere?
-
My Photoshop Elements 10 keeps needing to close because it encounters an error. I have tried uninstalling the program and reinstalling it but it still does not fix the problem. can you tell me what to do?