Script window: vanished

What happened to the script window ? (top menu, in Photoshop CS6). It was still there in Photoshop CS5.
I am using Photoshop CS6 extended.
Thank you to answer.

Actions and Scripts in Photoshop are two different things. That was the source of the confusion.
What is the real problem? That the actions you created in a prior version of Photoshop aren't in the panel in the new version? You have to save your custom Actions sets in .atn files, then load them yourself.
Nothing's stopping you from clicking the Actions entry of the Window menu to show the Actions panel.
Edit: Never mind - I missed reading the text from you second-to-last post.
-Noel

Similar Messages

Scripts have vanished from Scripts window

At work I have CS 3. This morning, I opened the Scripts window to run a script & nothing was there, not even the samples. I opened the relevant folders, and yes, the scripts were there.
Rebooting didn't help.
Could the actual listing of the scripts window must be in some XML file that has been corrupted or deleted?
Thank you.

Replace Your Preferences

Safari doesn't open Pop-up & Script Windows?!

Why Safari doesn't open Pop-up & Script Windows?
I always have to use other browsers like Firefox for opening them
Example link (Download Datasheet):
http://www.grapheast.com/ge-software/cp.php?id=70
Can anyone help please?

With Safari open, from the Menu Bar click Safari. Where says; Block Pop Up windows, Deselect that.
Keep in mind pop up windows can contain malicious code.
Carolyn

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

AIR: allow scripted window.open popup windows for specified sites ?

I'm adding desktop interaction to an existing webapp using AIR.
The webapp allows portlets to be undocked into their own window using a scripted "window.open" call.
When running the webapp in AIR, the "window.open" call is blocked (window ref returned is "undefined").
Presumably AIR is detecting the invocation of "window.open" isn't directly linked to the mouse click event.
With a "standard" browser, you can configure the popup blocker to allow popups for urls specified as Exceptions.
Is there a way to do this in AIR ? (either by config or by overriding one of the AIR classes).
I've looked at using a custom HtmlHost but the popup blocking occurs before the HtmlHost.createWindow () call

I couldn't find a way to customize the pop-up blocker in AIR.
I tested the same thing with Safari 4.0.5 (AIR uses WebKit 4.0.3) and got the same result.
After some testing I found that changing the Javascript to ensure that the event was bound to "onClick" fixed it (previously was bound to "onMouseDown")

Loading scripts - what's the difference between loading into edge via script window and including a script in the html document?

I have a html page that loading in two edge compositions and an external custom javascript file. The javacsript file includes the bootstrapCallback so I can store references to the loaded compositions and can communicate with them. This seems to work well. The problem have is when I also try and load in a custom plugin javascript files into the edge compositions via the script window inside edge - I don't understand how this works, for example if I load in a custom javascript file into one of the compositions can only that composition use it's funcitionality? Is loading in scripts via edge script window the same as including in html document, I'm confused how the two relate, please help me understand.

I have a html page that loading in two edge compositions and an external custom javascript file. The javacsript file includes the bootstrapCallback so I can store references to the loaded compositions and can communicate with them. This seems to work well. The problem have is when I also try and load in a custom plugin javascript files into the edge compositions via the script window inside edge - I don't understand how this works, for example if I load in a custom javascript file into one of the compositions can only that composition use it's funcitionality? Is loading in scripts via edge script window the same as including in html document, I'm confused how the two relate, please help me understand.

Opening OA page in new java script window from ProcessRequest method

I wish to open new OA page in new java script window.
Code is
javascript:var help_win = window.open(strHelpDesk,'help_win',
'resizable=yes,scrollbars=yes,toolbar=yes,width=600,height=500'); help_win.focus();
strHelpDesk is the url of the requested new OA page .. How can we open that page in new window from processRequest .. I can't assign this code in pages's attribute ... The new Oa page should be opened whenever , control goes in Processrequest ... Do we have such command ? can we use pagecontext.redirectImmediately..or any other command ..
thx in advance

Yes, you can, what you need to do is
add a raw text bean in your page.
Attach this raw text bean to a transient attribute (column) of VO
populate this column with your javascript function which will open a new window and inlcude its call here
now whenyour page will render and process request is called ur javascript function is triggered and a new window will be opened.I guess i am clear!
--Mukul

SAP Script - Window and box

Hello All
I have done changes to include few(3) lines in a SAP Script window. Because of those 3 lines, contents that were printed earlier are not getting printed.
The window is getting printed inside a box and it is defined as
BOX FRAME 10 TW.
Window height is 22.50 Ln,width 9.50 CM.
To rectify this should I increase the height of this window or should I define the attributes of the box
Please reply at the possible earliest.
Thanks in advance.

Check this
Setting default parameters for a box:
You can use the POSITION and SIZE commands to set default parmeters for a box.
Instead of:
/: BOX XPOS '11.21' MM YPOS '5.31' MM HEIGHT '10' MM WIDTH '20' MM INTENSITY 10 FRAME 0 TW
You can write:
/: POSITION XORIGIN '11.21' YORIGIN '5.31' MM
/: SIZE HEIGHT '2' MM WIDTH '76' MM
/: BOX FRAME 10 TW INTENSITY 10
This can be usefull if you gave several boxes that share the same parameters.
If you want to set the position realtively to the window use POSITION WINDOW
to set the position to the top/left start of the window. Then use POSITION
to set the current position relatively to the start of the Window.
Note that you uses "+" or "-" in the ORIGIN position to the set the position relatively.
/: POSITION WINDOW
/: POSITION XORIGIN '+5' MM YORIGIN '+10' MM
the position is now 5 MM from the left and 10 MM from the top of the window
NOTE: After using the position command you can move the current position
realtively to the last used position
/: POSITION XORIGIN '+10' MM YORIGIN '+20' MM
Now the position will be X = 15 and Y = 30
Drawing a line. You can draw a line by setting the Height or Weidth to 0
and add a frane. E.g. a horizontal line:
/: SIZE HEIGHT '0' MM WIDTH '200' MM
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.81' MM INTENSITY 100

DVDSP 4 - Script window does not appear!

Hi,
since the upgrade from DVDSP3 to DVDSP4 a script can only be created but not be edited: the "Script" window (where one once was able to define a script line) keeps empty. Doubleclick on the standart command "nop" does not have any effect!
DVDSP4 came with the latest Final Cut Studio HD package and is version 4.1.0
The same problem occures on different G5s.
Can anybody help?
thx!!

Since the upgrade from DVDSP3 to DVDSP4 a script can only be created but not be edited: the "Script" window (where one once was able to define a script line) keeps empty. Doubleclick on the standart command "nop" does not have any effect!
See if this works
Press F3 Key (to make sure we are on the same screen layout)
Highlight the script in the outline
On the bottom where the track, story script taabs are, click on script tab
The script should have an NOP by default.
Click on the NOP to highlight
In Inspector (to the right) you should be able to use the pulldowns to change the NOPs
Does this work?

Resizing the Scripts Window

I have a problem with my Scripts Window in Interactive Reporting Studio 9.3.1.0.0.248.
When dual screening I went to resize the window and it snapped to a thin line that is so narrow I can't click on the resize icon to fix it. Does anybody know how to reset the default window size?

Have you tried to put IR back into the main monitor and opening the script editor there?
Also, here is an except from a post on ittoolbox
http://businessintelligence.ittoolbox.com/groups/technical-functional/brio-l/scipt-editor-not-opening-properly-874463
"You can fix it by going into the registry editor and modifying the
script editor top, left, bottom, and right values to something
"reasonable", or maybe just delete those values. By doing the latter,
defaults will be used the next time you open the window. The values are
at HKEY_CURRENT_USER\Software\Brio Software\brioqry\EIS."
Wayne Van Sluys
TopDown Consulting

Where is the script window in captivate?

Hi
I am reading through the Captivate 4 User Guide and am on Chapter 11 on "Variables and Advanced Actions". There is a tutorial on scripting on page 148 that steps me through how to set up a login slide with user name and password. It states on page 149 that to create a script I need to click on the Project menu and select Actions. "In the script window, create a script named validate with the following code:..." When I click Project>Actions, I don't see the script window. Any idea on what I am doing wrong? Thank you.

Hello,
Please click on the tab 'Advanced Actions'. This window has two tabs: your are on the first for Variables, second is for the scripting, called Advanced Actions.
Lilybiri

Msi-installation: no distribution-script window

Hello together
When installing a simple application a window is showed "running pre-/post-distribution script" with a progress bar. When installing a msi-application it seems that this window isn't being showed at all - only the progress-window during the msi-installation.
I'm running a long task in the pre-distribution script (uninstallation of the previous version). During the runtime of the pre-distribution script nothing is showed, so the user could think that nothing is going on and getting nervous... ;-)
I don't expect to have an output of my distribution script, just the usual distribution-script-window.
Am I doing something wrong, is it a bug or is the only way to prevent this behaviour to create a simple application that is run before the msi-installation?
Using Zenworks 7.0.1.4
kind regards,
Stefan

dtMsgBox is a good idea, but has a strange gui. I would rather place it in the center of the screen in this case than at the top and would like to change its outfit (text, color, ...).
I'd prefer if zenworks would behave in installing msi-packages as it does with simple applications.

Close_Form('XXE_F501_SCRIPTING_START'); this is a command in IESCLPKG.PLL WHEN I AM USING THIS COMMAND MY SCRIPTING WINDOW IS GETTING CLOSED BUT THEN ONE ERROR IS COMMING ,KINDLY GIVE ME IDEA TO DEBUG THAT ERROR

Close_Form('XXE_F501_SCRIPTING_START'); this is a command in IESCLPKG.PLL WHEN I AM USING THIS COMMAND MY SCRIPTING WINDOW IS GETTING CLOSED BUT THEN ONE ERROR IS COMMING ,KINDLY GIVE ME IDEA TO DEBUG THAT ERROR
if (param_value = 'CLOSE_SCRIPTING_WINDOW') then
          --go_block('VIEW_IB');
         -- SET_WINDOW_PROPERTY('SCRIPTING_WINDOW', WINDOW_STATE, MINIMIZE);
          --Set_Window_Property('SCRIPTING_WINDOW', VISIBLE, PROPERTY_OFF);
          --hide_window('SCRIPTING_WINDOW');
           -- GO_BLOCK('CTRL');
           fnd_message.set_string('1');--nimish
           fnd_message.show;--nimish
           --Close_Form('XXE_F501_SCRIPTING_START'); -- Commented for Nova
           fnd_message.set_string('2');--nimish
           fnd_message.show;--nimish
            Scripting_Util.EndScript;
        end if;
THIS IS THE PLL CODE KINDLY GIVE ME A CLEAR SOLUTION.

First: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus

Scripting the vanishing point filter?

Hi,
i'm looking for a way to script the vanishing point filter in CS3.
Is there a possibility to do so?
Or do i have to programm that all by myself?
I want to project an image into another with a given perspective.
I have to use scripts, because this action should be automated on a given set of images later on.
Any help is appreciated.
Cheers,
Carsten

[email protected] wrote:
> Hi,
>
> i'm looking for a way to script the vanishing point filter in CS3.
> Is there a possibility to do so?
See if the ScriptingListener plugin generates any code for it. If it doesn't,
you are probably out of luck.
-X

Cursor in script window

Has anyone else had this problem? When I'm typing a script,
the cursor gets further and further away from the text. When I go
to select a section of the text, It doesn't select what I expect it
to, but selects something earlier in the sentence. Also the text
kind of looks crappy in the window. Almost like it's squeezed in.
Are there any solutions to fixing this or is there an update
coming? This is making it more difficult to do scripting.

I have read on other forums that I can separate the script
window and this will solve the problem. I can't seem to figure out
how to make the script window a single floating group of it's own.
Any ideas?

Script window: vanished

Similar Messages

Maybe you are looking for