Scripts error message. I have tried to ensure that I have met all installation requirements.

About a week ago, I started getting a message saying that my flashplayer was out of date and needed to be updated.. I have tried several times to update and it will allow me to run the update installer. After watching the progress bar get to 100%, I keep getting a scripts error. The following is a copy of the error message I am getting :

What is your operating system & version?
What is your web browser?

Similar Messages

I continue to recieve the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe photoshop elements 13 software that I purchased.

I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.

cancel the akamai download and download files 1 of 2 and 2 of 2 directly. put both in the same directory and double click the exe to start installation.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Shockwave Plug-in unresponsive or just crashes? Help (I have tried almost everything that I know of)

Hi, I am sure you have heard this a million times but I'm going to ask because I have run out of options and have never asked it here. I like to play Facebook games on my computer which is a 32 bit windows 7 version operating system. Anyway it crashes on me constantly! It can be up to 5 times within a half hour! Well actually it goes Unresposive on me around 5 times and crashes around twice an hour or half hour time.Then I just quit because i am so fed up!. Sometimes I wait it out.That is if it say's that the plug-in isn't responsive. It will then usually snap out of it but when it doesn't it decides to crash all together.Then it works just to turn around and do it again. Then I have to go back to the main Face book page and start the game all over again. This has been going on for as long as I can remember. Gradually getting worse as I try to fix it. Not sure what changed to make it happen in the first place because I am the only one using my computer for the most part and I do not change or download anything. Occassionally, my son might use it but he is pretty computer savy. I am not that good with computers, I mean like a computer nerd or something, but I definitely know my way around one for the most part. I have been looking this problem up forever on the Internet and have tried most everything that I have read and it has only made my problems worse. Right now I am trying to uninstall it so I can then reinstall it but the Uninstall program from Adobe won't go any further than the part where they tell you that you have something else running in the background and they can't go forward until it is closed. Problem is, everything is closed that I can tell. They say my Internet Explorer is running but it's not. Not that I can tell any way. Like I said in less there is some secret that I don't know about I would know from my desktop, downloads, or task manager among other ways if it were running. I remember trying this before as well months ago and it said the same thing. I have already tried the double file thing under Chrome// Plugins and disabled my second copy that is once I had one. At first I didn't but I keep a close eye on it because of my son so as soon as there were two copies running I disabled one.It didn't make any difference.So that isn't the problem and never has been.So please no need to bring that one up. I of course tried other things, suggestions from other websites but can't remember them now except that one of the suggestions I followed literally wiped out my entire Chrome Favorites Bookmark List. Argggg!! Years and years of websites were gone just like that. When I set my computer back to before I did that it still didn't give them back to me. O.K. so maybe I don't know what the hell I am doing or maybe they didn't. I don't know. I was trying anything. I was desperate and they sounded like they knew what they are talking about. But it still irritates me even though it was over 6 months ago or more.. I tried then everything to get my bookmarks back in Chrome and I couldn't. Any help out there about fixing the Shockwave crashes and Shockwave Unresponsive warnings? Please!Thanks, Ellen
P.S. Oh by the way this is what I have.
Version 11.7.700.225

Ok you got to post more information then that of the crash can you post more information about it like the frequency it happens, the code that pops up the id so go into the reliability history and post the info about the last crash

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

Well... what IS the error message?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I've upgraded my pc and now Im getting an error message when Im trying to sync my ipod saying I have two itunes libraries. The library thats there is only showing some songs and it's not uploading songs Ive just bought.

I've upgraded my pc and now Im getting an error message when Im trying to sync my ipod saying I have two itunes libraries. The library thats there is only showing some songs and it's not uploading songs Ive just bought.

You seem to have tried everything, and you say it's syncing fine on your Dad's iMac, so I assume, you have also done a Disk Diagnostic from an earlier post by tt2 and conclude that your iPod Hardisk is good.
You don't have to use it as a heavy paperweight, the problem is only using your Windows 7 machine for syncing.
In your troubleshooting steps, did you try to use another High-Speed USB 2.0 port, USB controller resource are very scarce, so if you use other USB devices, while syncing your iPod, it may just freeze.
Windows have a bad reputation for device conflict, so better don't connect other USB devices, while syncing, better sync it while disconnected from Internet, stop antivirus just before you go to bed.
Have a nice day!

I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.

I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.

Reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes. How do I resolve this issue?

I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes. How do I resolve this issue?

The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

Script error message when printing google maps driving direction into PDF

My system; Win 7/ 64bits/IE 9 both 32 and 64 bits/Adobe Acrobats 10.1.1. Pro
Intial problems in printing web sites into PDF files has been resolved when I upgraded into 10.0.1 after having installed IE9.
However, with 10.1.1. version, I noticed that when I tried to convert google maps results for a driving direction (From A to B), script error message showed up and I could not convert it into PDF. I tried both IE 9 32bits and 64 bits version, but both failed to do it. Please fix the problem for the next updates.
Thanks

You might try running CHKDSK on the disk to where you try to save the file. You might have a corrupted file directory or a damaged track on that disk. I urge you to backup what you can before trying this.
Ken F.

Error message 3014 when trying to restore ipod touch

error message 3014 when trying to restore ipod touch, i have tried everything, any suggestions?

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Deskjet840c on win7 script error message is preventing printing from a web page.

when I try to print from a webpage I get a script error message that says line1527---error invalid argument---code0---url res://ieframe.dll/preview.js. I can print ok from documents stored on pc and have tried all the fixes I can think of. It worked fine before microsoft auto update on 02/12/11.I was using int browser 9 but downloaded firefox browser recently on which I can print web pages ok.would like to fix original prob.Help!--anyone.

Hi mince,
If you are able to print documents from the computer and Firefox then you will need to contact Microsoft support so they can assist you with fixing IE 9.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Can't insert text into web page plus script error message

I'm using CS3 and, on a fairly regular basis, when I am either pasting or inserting content (usually a newsletter of 500-1000 words), I get a message saying something like I can't insert text in this area. I definitely can insert text in the area as I have done it tons of times before. I sometimes have to cut and past a doc line by line to get it to insert. Very frustrating!
Also, just recently, I've been getting a script error message, "An error has occurred in the script of this page" followed by Line: 992, Char: 106, Error: Unterminated String Constant, followed by the question: Do you want to continue running scripts on this page? I click Yes and everything seems to work fine.
Help on either would be appreciated.
Thanks in advance.

You might want to make sure you are trying to copy plain text. It's possible that if you are copying from a Word document or another Web site that you are bringing along extra unseen code it doesn't like. Try copying into Notepad first and then copying from Notepad into Contribute. Not sure if that's the problem or not, but that's what came to my head first.
I used to get an error that sounds similar (however it's not reproducing the error for me right now) to your error. It was because some of my users had javascript menus on their page that Contribute didn't like. However, if worked fine when you clicked yes and it was fine once it was published. So if you are running a script that's probably why and I wouldn't worry too much about it as long as you can continue working and the page displays to your users correctly once published. It's just annoying.
Hope that helps. Good luck.

TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version. What should I do?

I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version. What can I do?

Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden

RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

Hi, all,
Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
Any advice you could give would be welcome.

Hi there
Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi.

I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi. I have tried removing the old version in add/remove programs, but it says the same error. I tried deleting every thing that has itunes in the file/folder/etc and it didn't help.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Have a new itouch. I'm having trouble downloading iTunes. I keep getting the error message: Apple Application software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTues again. Error 2.

I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
Lg

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

Scripts error message. I have tried to ensure that I have met all installation requirements.

Similar Messages

Maybe you are looking for