Scripts not showing up in console

Hi all
I have put my folder scripts in the correct location as far as I know but I can't get any scripts to show up.
See the screenshot below
Any Ideas?
Trevor

I hope this is the last one on this topic!
With a one line script I can use the consul easily but lets say I have something really complicated like the script below. Other than fitting it on one line how can I run it from the console?
for (var i = 0; i < 10; i++) {
console.println(i);
Ctrl Enter after the } throws the following error
SyntaxError: syntax error
1:Console:Exec
undefined
Sorry for asking such pathetically basic questions

Similar Messages

BPEL Processes are not showing in BPEL Console after OPMN restart

Hi All,
BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
Can some one help on this?
Thanks

Vikky,
Are you using 10g?
If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
It might relates to permissions, or DB issues etc....
Arik

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
Any idea?

Hello,
Can you tell us what versions of CUCM and CUxAC you are using? Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application. You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
Thanks,
Tony

Directory not showing in attendant console

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
Any idea?

Under Engineering ----Service Management,can u check LDAP service is running.
Also, under system configuration ---directory synchronisation ----Enable contact synchronisation is enabled.
Also, u are creating this user in AD and then, fetching to CUCM and Attendant Console is finally these users as CCM Source.
regds,
aman

Debugging mode - sql query not showing up in console

Hi,
I have turned on the debugging mode via Admin->Server Configuration->Debug Level. Set it to debug mode.
I restarted the server. I wanted to test if the query will show up if there was an error in the query.
However I am not seeing any query. It complains that there is some error, but doesn't show what query string it is using.
Anyone got any idea how I can get query to show up on console (BI Publisher web interface) as opposed to
going and seeing the log files on the server.
Please let me know.
Thanks
Girija

Thankyou Vetsrini.
I will try out custom log table approach.
I see that there is a way to test pl/sql scripts via the DBMS output
and for that we need some invoking program like SQL PLUS to get the
log out into a file.
However, we wanted to see if there is a way to set Pl/SQL log files
and get PL/SQL logs when the calling program is BI Publisher.
regards
Girija

Transactions Not Showing up in Console

We recently deployed new functionality in our WLS 6.1 based application. The new
functionality consists of MDB's and a Stateless Session Bean which the MDB's invoke.
The MDB's are
packaged in a separate jar file from the SSB, which is packaged in another jar
file
that houses all of our SSB's. The MDB's are transactional.
One peculiar issue we have noticed is that in the WLS Console, we do not "see"
any
transactions related to these new MDB's or the new SSB (Servers->OurServer->Monitoring
Tab->JTA Tab).
If you click on "Monitor all Transactions by Name" we are expecting to see an
entry
for each MDB's onMessage() method, in addition to any method's invoked on the
new Stateless Session Bean.
All of our other Stateless Session Bean methods are show in the "Monitor all Transactions
by Name" View.
Any insight as to why these MDB's and SSB are not showing up in this view? Are
we misconfigured in anyway?
Please let me know if you need further information, as I would gladly provide
it.
Thanks,
Al

I hope this is the last one on this topic!
With a one line script I can use the consul easily but lets say I have something really complicated like the script below. Other than fitting it on one line how can I run it from the console?
for (var i = 0; i < 10; i++) {
console.println(i);
Ctrl Enter after the } throws the following error
SyntaxError: syntax error
1:Console:Exec
undefined
Sorry for asking such pathetically basic questions

Workstations not showing up in Console one (had been deleted before)

We're having a problem at the school I work at. I had installed Zenworks on
a particular set of computers and they became registered in Console One. We
then had some problems relating to other software and decided to take
Zenworks off of these computers. This was just poor troubleshooting. We
deleted these workstations from Console one as well. We've since determined
that Zenworks was never the problem and reinstalled it on the those
desktops. Unfortunately, the machines aren't re-registering within Console
One and will not show up.
Any help would be greatly appreciated. Thanks.
Console One version: 1.3.6c
Zenworks 6.5
Novell Client 4.90 SP2

Tallbrooks,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Applet does not show up in console main page

Hello,
I have installed the Weblogic 6.0 beta on NT 4.0 SP4
When I use the Microsoft IE 5.00, the applet in the first console page index.jsp does not show up. Any suggestions ?
Johan Thorselius

An addition - it's looks like in the source that a jsp-file is used that is called "sidebar.jsp". But when I do a search on the harddisk the sidebar.jsp is not there. Is this generated ? Why does not the sidebar menu show up ?
Regards
Johan Thorselius
"Johan Thorselius" <[email protected]> wrote:
>
>
>
Hello,
I have installed the Weblogic 6.0 beta on NT 4.0 SP4
When I use the Microsoft IE 5.00, the applet in the first console page index.jsp does not show up. Any suggestions ?
Johan Thorselius

CIPC not showing on operator console

Hi,
We have a strange issue which is doing my head in.
CUCM Version 9.1.2-10000-28
Arc Console Operator 5.1.4.1996
When some users are using CIPC softphones they do not appear to listed as available in the Operator Console, however some users who use CIPC softphones are appearing available in the Operator Console. I've narrowed it down to a CIPC related problem I believe because I asked them to login to a physical phone (we use EM) and seen that a user previously not available in the Console suddenly became available. So I've tried the following:
1) Restart of CTI Manager service on the CUCM where the Arc CTI related ports are registered to. This resolved an issue with users not appearing available in the Console before, but doesn't resolve this issue
2) Checked that the CIPC device association is in place on the End User, though it doesn't seem to matter as I have identified CIPC users who are displayed as available without this association in place.
3) Checked that Allow Control of CTI is enabled in all places (the line DN, the End user, the CIPC)
4) Compared a few CIPC configurations and couldn't see any noticeable difference between them.
5) Checked the user details in the Arc Console Operator program and the user is set up for BLF and has the correct device name associated under their contact details. Again, don't believe that the device name association is necessary either.
At first I thought the reason for this was down to some of the users being logged into their physical phones, thus showing up in the console as registered, but the customer said they created two new users with CIPC only. One I have identified is available in the console and the other one is not showing as available. Judging by the dependency records, there does not appear to be any associations with other phones.
Has anyone had this problem before and does anybody have any suggestions as to how I resolve it?
Thanks in advance for any suggestions.
Cheers

Hi,
I don't have any problems using CIPC at all. The problem is that from the Arc Operator Console they are not showing up as available, so let's just say an inbound call comes into the receptionist and the receptionist wants to transfer the call. Because the user is not showing up as available from the perspective of the Console, the receptionist cannot transfer that call to the user. The CIPC devices are registered to CUCM, but there are those who are present in the Operator Console database who are not showing as available and there are those who are in the Operator Console database who are showing up as available.
Admittedly the CIPC are not set up using EM for the reason that we didn't want the users going through the extra hassle of logging in and out of the CIPC, but that's a step we can take. It doesn't explain why some are showing up from the Console and other's don't though.
My gut feeling is it's not CUCM, but any other checks that can be suggested would be appreciated.

Created users not showing in beekeeper console

Hi,
After creating a user in the beekeeper console, this user does not show up in the "Users" entry. When I click on "Groups" (ALL_USERS), and then the members tab, I can see the user, and my succesfully registered device also shows up under Devices, but the Users entry just states "No Users".
The beectl list_users command does show my user.
Am I missing out on something here?
Thanks!

This problem should be fixed in 1.4.3. Did you upgrade, or is it a fresh install?
If the user was created, does it at least appear if you issue "beectl list_users" ?
--Ruben

Events script not showing up in designer

I am working on a form using ES4 version 11 and when I try to view the Javascript code for the events nothing shows up. I also cannot preview the form using the preview tab. It just hangs. When I quit and restart the form sometimes the script code shows up. Any idas what may be causing this?

Hi,
This does happen to me sometimes, I'm guess that sometimes when an exception is thrown in one of the early events then the preview fails and the only way to recover is to restart Designer.
Try going to the temp directory, just type "%temp%" (without the quotes in the Windows Explorer address bar), you should see a PDF file with a generated name something like, _12fk26d9o1adb71lh.pdf. This is the file Designer generates when trying to do a preview. Open this file in Acrobat (with the "When Exception is thrown" option set to break) and you should see what is causing the exception.
Good luck
Bruce

Deployed processes not showing in BPEL Console

I am working on a processes that uses AQ to interface with a Oracle back end application.
It seemed to work fine, but from a certain moment on it didn't pick up any messages that were qeueued. Except for the first instance of the process. Though the monitor showed it waiting for the response, the process had actually received the response and had proceeded with the next step (in which a file was written to a directory, as I could see). Then it stopped. All subsequent processes stopped after queueing an input message.
After stopping and starting the BPEL Process Manager and OC4J container things went from bad to worse. Now none of the deployed processes are visible in the monitor. However, if I look at a previous instance of a process, it does show up on the dashboard.
I've had a look at the application log of the orabpel OC4J application and it shows a lot of errors (of the same sort) since BEPL Process Manager was stopped. Restarting the Application Server didn't help.
This is the error I'm getting:
05/12/19 14:55:19 MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receive
05/12/19 14:55:19 MessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
Does anybody have a clue about what is wrong?

Some more info on the problem:
I took one of the application servers out of the cluster and began working on it in a standalone state.
The Setup, OracleAS Middle Tier with BPEL:
1. The Application server sits on an internal network that has access to the outside world but restricted incoming access.
2. There is an Apache server running mod_proxy that acts as a reverse proxy for all requests to http://workflow/. http://workflow/ connects the requests to http://servername:7797/, where BPEL is running.
This works to get connectivity to the Application Server. We want the WSDL Location to start with http://workflow/ insead of http://servername:7797/ so we can eventually use a clustered load balancing environment.
I found out that the processes are not showing up in the BPEL Dashboard when I change, soapCallbackUrl and soapServerUrl to http://workflow/. They will not show up until I actually navigate to the WSDL file using teh http://workflow beginning. After which they show up in the BPEL Dashboard. However, on a OC4J_BPEL restart they all disappear again.
Everything works if I use the http://servername:7797/ beginning for WSDLs, but this will not work for the overall implementation.
How can I change soapCallbackUrl and soapServerUrl to http://workflow and still use the BPEL Dashboard?

SCCM 2012 R2 CU1 Client updates but not showing in Admin Console

I have updated my 5.00.7958.1000 client to Cumulative Update 1 (KB2938441). If I look on the client the version now says 5.00.7958.1203. My admin console when I click on the client still says 5.00.7958.1000. I tried update membership. It has
been a couple days since the update on the one. Another was early this morning. I have updated using the Patch and software package deployment. I have used the push installation to upgrade. In all cases, upgrade works, but in the console
the client versions are not changing and keeps saying version is the same.
Why wouldn't it update by now? This is crazy the time it is taking to show a new version has been installed/upgraded.
What process needs to happen? Are there specific logs for this data coming back to the console I can check?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

We are a school district so the majority of our clients are intranet. Our WAN is connected with Gigabit connections. Single sccm primary site at center of the hub-n-spoke network topology. Server running Windows server 2012 w/ 4cpu and
16 GB RAM. Server running in VMware so we can easily increase spec if needed, so more interested in what the "common" configuration may be so I can test it with those settings first and adjust accordingly.
We have 3,500 clients, only 800 of which may go home the other stay on network at all times. A large number of those 3,500 are laptops that are in carts so they are not left on all the time so the different processes need to be somewhat frequent.
Additionally, it will be almost never that all those machines are on at the same time. Many could be sitting shutdown in the carts.
Please offer your opinion as to what good settings might be. I know they may not be perfect, but I can test them out.
Also checking the Client Settings under Administration workspace, I don't see all the same type of actions I do under the Client computer -> control panel -> configuration manager -> Actions tab. Are these configured elsewhere
or do they all fall under the "hardware inventory" and "software inventory" sections of the Administration -> Client Settings?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

Process instances do not show in BPEL Console

Hi all,
I have a BPEL, which reads a files from a particular folder if any, Process records in that file and then stores it in database.
I am facing a problem, my records gets processed, this BPEL works fine, as i can see the output in database, however associated instances are not shown in the BPEL Console. But if i restart the process (i.e. Switch OFF the process and Again Switch ON) it shows me all the previous instances and also the current instances. But sometime again this problem occurs.
Has anyone faced the same issue? Please let me know in case anyone has solution.
Thanks in advance.

[http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf|http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf] I found below in SOA best practices guide:
Why Does the Instance of an Invoked Process Not Display in Oracle BPEL Control?
If the process invoked is asynchronous, the message headers and payload are stored in
the invoke_message table. The invocation message is then processed by a
background thread to create an asynchronous BPEL process instance. If an error is
encountered while processing the invocation message, the transaction is rolled back
and the invoke message remains in its unhandled state in the invoke_message table.
See "How Does an Invoke Message and Activity Display in the Manual Recovery
Page?" on page 1-18 for more details on this scenario.
If the process invoked is synchronous, the cause for the missing instance is likely a
transaction rollback. The reasons for a transaction rollback are as follows:
■ Third party manipulation of the JTA transaction. As described in "How Do I Force
a Rollback in a BPEL Flow?" on page 1-5, a failed database adapter invocation can
cause the TopLink layer to mark the JTA transaction for rollback. Because Oracle
BPEL Server relies on the JTA transaction for persistence (not just as a signaling
mechanism between transaction-aware modules), any changes to the status of the
transaction impact Oracle BPEL Server’s ability to dehydrate the instance.
■ Transaction timeout. The synchronous process may be invoking one or more
backend synchronous services; the total time of all the backend calls may exceed
the timeout value for the transaction. See "How Do I Modify Transaction Timeout
Settings for Oracle BPEL Server?" on page 1-9 for details on how to increase the
transaction timeout value.
■ Failure to dehydrate the synchronous instance to the database. If the
completionPersistPolicy is set to on, the instance attempts to save itself
before returning to the caller. Typically, errors are encountered during this step if
the database connection has been severed or the tablespace is full. Some customers
Transactions
Oracle BPEL Process Manager 1-9
have encountered problems with saving the audit trail of the instance. For
example, there are problems with JDBC batching in 10.1.3.1.0 that the audit trail
persistence code uses. When a synchronous invocation does not result in an
instance visible from Oracle BPEL Control (assuming that
completionPersistPolicy is set to a value of on, deferred, or faulted),
use the following steps to find the underlying error:
– Enable all loggers to debug mode.
– Resubmit the invocation message.
– Check the Oracle Process Manager and Notification Server (OPMN) or
command-line log for the underlying exception stack trace.
Please refer to link below:
http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf

Free disk space is not showing in DPM console

Hello Guys,
We have one DPM server (2K12 R2). Configured for D2D backup on HP storage. recently we have removed inactive protection of around 18 TB. But in Management Workspace it is showing only 110 GB space unallocated. If i view the things in Disk Management is also
not giving any clear picture. For example:
In Volume List it is displaying the space correctly but Graphical View is completely different.
Is there any way to claim this space in DPM console?
Thanks,
Arun
Arun Kumar

Hi Arun,
I assume the data was removed from Disk1 of the Disk Management screenshot - it seems that many partitions are displayed with gray.
If it is not a display issue, I cannot confirm if it is caused by storage device or Windows. It could also be caused if storage actually not "remove" data but just marked them as deleted - you may need to try a reboot or check if any specific option
is available on storage device side which could help release space.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Scripts not showing up in console

Similar Messages

Maybe you are looking for