Scripts to Create DDL Statements DON'T CREATE DE DDL FILES
I'm importing some DBF from Visual Foxpro / Dbase, I've added to the tablespace CONVERSION the schema and data of the dbf files.
but, now I want to generate the DB to Oracle 8i, the scripts with extension *.scr don`t generate the *.ddl files to create the tables in oracle 8i where I want to load the flat files generated previously.
Anybody can help me?
I want to execute the third part of the manual which said:
To begin, change into the convkit\oracle\schema directory. Then execute the following PL/SQL scripts. After each script, you can check for errors in files called <filename>.out (e.g., user.out).
NOTE: If you replaced convuser with your username and dms with your password, be sure to make the replacements before executing these scripts.
1. sqlplus convuser/dms @user.scr
2. sqlplus convuser/dms @tbl.scr
3. sqlplus convuser/dms @primkey.scr
4. sqlplus convuser/dms @def.scr
5. sqlplus convuser/dms @check.scr
6. sqlplus convuser/dms @index.scr
7. sqlplus convuser/dms @fornkey.scr
I'm importing some DBF from Visual Foxpro / Dbase, I've added to the tablespace CONVERSION the schema and data of the dbf files.
but, now I want to generate the DB to Oracle 8i, the scripts with extension *.scr don`t generate the *.ddl files to create the tables in oracle 8i where I want to load the flat files generated previously.
Anybody can help me?
I want to execute the third part of the manual which said:
To begin, change into the convkit\oracle\schema directory. Then execute the following PL/SQL scripts. After each script, you can check for errors in files called <filename>.out (e.g., user.out).
NOTE: If you replaced convuser with your username and dms with your password, be sure to make the replacements before executing these scripts.
1. sqlplus convuser/dms @user.scr
2. sqlplus convuser/dms @tbl.scr
3. sqlplus convuser/dms @primkey.scr
4. sqlplus convuser/dms @def.scr
5. sqlplus convuser/dms @check.scr
6. sqlplus convuser/dms @index.scr
7. sqlplus convuser/dms @fornkey.scr
Similar Messages
-
Is there a way to run a script to create an RPD file from MDS XML files
We would be interested in using the MDS XML format for the RPD file in saving it in our Subversion source code control system, and I have seen how to do this in the User documentation.
Our question is whether or not there is a way to use a command line tool to recreate the rpd file without having to use the Admin tool, so that we can automate the deployment of the RPD file from source code control to QA and Production environments.
If we check in the RPD file directly, then there is a way to automate the process, but we would prefer to use the MDS XML format since this allows us to save changes in text format, not binary, but we still need to be able to automate the process.
In the Oracle Fusion Middleware XML Schema Reference for Oracle Business Intelligence Enterprise Edition document, I have found that there is a way to automate the creation of the MDS XML files from an RPD file using this command:
biserverxmlgen -M -R repository_pathname [-P password] -D output_directory [-8] [-N] [-Q|-S]
So my question is basically is there a way to reverse this process, to use some command line tool (or Weblogic Scripting or some other mechanism) to create the RPD file from the MDS XML files? Are there options on the biserverxmlexec command that will do what I am asking?Hey dmfairley,
Thanks for the question. You can absolutely export the project as .mp3, as outlined in this resource:
GarageBand Help: Export songs to disk
http://help.apple.com/garageband/mac/10.0/#gbnd7cbf5ed9
Export songs to disk
You can export a project to your computer as a stereo audio file.
Exported files can be reused in GarageBand to save processing resources by replacing or bypassing multiple regions, instruments, and effects. They can also be used with other music applications and devices, posted on the Internet (on a webpage, or in the iTunes Store, for example), added to an iTunes playlist, or uploaded to a mobile device such as iPhone or iPad.
1. Choose Share > Export Song to Disk.
2. To rename the exported file, select the name in the Save As field, then enter a new name.
3. Choose a location to save the exported file from the Where pop-up menu.
4. Select the format for the exported file (AAC, MP3, or AIFF).
5. Choose the quality setting for the exported file from the Quality pop-up menu.
6. Click Export.
Thanks,
Matt M. -
Illustrator script to create symbols from images in folder
Time to give back to the community...
Here is a script I recently devised to bulk create symbols from images in a folder. Tested with Illustrator CC 2014.
// Import Folder's Files as Symbols - Illustrator CC script
// Description: Creates symbols from images in the designated folder into current document
// Author : Oscar Rines (oscarrines (at) gmail.com)
// Version : 1.0.0 on 2014-09-21
// Reused code from "Import Folder's Files as Layers - Illustrator CS3 script"
// by Nathaniel V. KELSO ([email protected])
#target illustrator
function getFolder() {
return Folder.selectDialog('Please select the folder to be imported:', Folder('~'));
function symbolExists(seekInDoc, seekSymbol) {
for (var j=0; j < seekInDoc.symbols.length; j++) {
if (seekInDoc.symbols[j].name == seekSymbol) {
return true;
return false;
function importFolderContents(selectedFolder) {
var activeDoc = app.activeDocument; //Active object reference
// if a folder was selected continue with action, otherwise quit
if (selectedFolder) {
var newsymbol; //Symbol object reference
var placedart; //PlacedItem object reference
var fname; //File name
var sname; //Symbol name
var symbolcount = 0; //Number of symbols added
var templayer = activeDoc.layers.add(); //Create a new temporary layer
templayer.name = "Temporary layer"
var imageList = selectedFolder.getFiles(); //retrieve files in the folder
// Create a palette-type window (a modeless or floating dialog),
var win = new Window("palette", "SnpCreateProgressBar", {x:100, y:100, width:750, height:310});
win.pnl = win.add("panel", [10, 10, 740, 255], "Progress"); //add a panel to contain the components
win.pnl.currentTaskLabel = win.pnl.add("statictext", [10, 18, 620, 33], "Examining: -"); //label indicating current file being examined
win.pnl.progBarLabel = win.pnl.add("statictext", [620, 18, 720, 33], "0/0"); //progress bar label
win.pnl.progBarLabel.justify = 'right';
win.pnl.progBar = win.pnl.add("progressbar", [10, 35, 720, 60], 0, imageList.length-1); //progress bar
win.pnl.symbolCount = win.pnl.add("statictext", [10, 70, 710, 85], "Symbols added: 0"); //label indicating number of symbols created
win.pnl.symbolLabel = win.pnl.add("statictext", [10, 85, 710, 100], "Last added symbol: -"); //label indicating name of the symbol created
win.pnl.errorListLabel = win.pnl.add("statictext", [10, 110, 720, 125], "Error log:"); //progress bar label
win.pnl.errorList = win.pnl.add ("edittext", [10, 125, 720, 225], "", {multiline: true, scrolling: true}); //errorlist
//win.pnl.errorList.graphics.font = ScriptUI.newFont ("Arial", "REGULAR", 7);
//win.pnl.errorList.graphics.foregroundColor = win.pnl.errorList.graphics.newPen(ScriptUIGraphics.PenType.SOLID_COLOR, [1, 0, 0, 1], 1);
win.doneButton = win.add("button", [640, 265, 740, 295], "OK"); //button to dispose the panel
win.doneButton.onClick = function () //define behavior for the "Done" button
win.close();
win.center();
win.show();
//Iterate images
for (var i = 0; i < imageList.length; i++) {
win.pnl.currentTaskLabel.text = 'Examining: ' + imageList[i].name; //update current file indicator
win.pnl.progBarLabel.text = i+1 + '/' + imageList.length; //update file count
win.pnl.progBar.value = i+1; //update progress bar
if (imageList[i] instanceof File) {
fname = imageList[i].name.toLowerCase(); //convert file name to lowercase to check for supported formats
if( (fname.indexOf('.eps') == -1) &&
(fname.indexOf('.png') == -1)) {
win.pnl.errorList.text += 'Skipping ' + imageList[i].name + '. Not a supported type.\r'; //log error
continue; // skip unsupported formats
else {
sname = imageList[i].name.substring(0, imageList[i].name.lastIndexOf(".") ); //discard file extension
// Check for duplicate symbol name;
if (symbolExists(activeDoc, sname)) {
win.pnl.errorList.text += 'Skipping ' + imageList[i].name + '. Duplicate symbol for name: ' + sname + '\r'; //log error
else {
placedart = activeDoc.placedItems.add(); //get a reference to a new placedItem object
placedart.file = imageList[i]; //link the object to the image on disk
placedart.name = sname; //give the placed item a name
placedart.embed(); //make this a RasterItem
placedart = activeDoc.rasterItems.getByName(sname); //get a reference to the newly created raster item
newsymbol = activeDoc.symbols.add(placedart); //add the raster item to the symbols
newsymbol.name = sname; //name the symbol
symbolcount++; //update the count of symbols created
placedart.remove(); //remove the raster item from the canvas
win.pnl.symbolCount.text = 'Symbols added: ' + symbolcount; //update created number of symbols indicator
win.pnl.symbolLabel.text = 'Last added symbol: ' + sname; //update created symbol indicator
else {
win.pnl.errorList.text += 'Skipping ' + imageList[i].name + '. Not a regular file.\r'; //log error
win.update(); //required so pop-up window content updates are shown
win.pnl.currentTaskLabel.text = ''; //clear current file indicator
// Final verdict
if (symbolcount >0) {
win.pnl.symbolLabel.text = 'Symbol library changed. Do not forget to save your work';
else {
win.pnl.symbolLabel.text = 'No new symbols added to the library';
win.update(); //update window contents
templayer.remove(); //remove the temporary layer
else {
alert("Action cancelled by user");
if ( app.documents.length > 0 ) {
importFolderContents( getFolder() );
else{
Window.alert("You must open at least one document.");Thank you, nice job & I am looking forward to trying it out!
-
Using XML file in Java script to create Google Map
Hello,
I work for a non-profit in San Diego as a GIS Specialist. I have had to teach myself about some scripting to create some dynamic maps, but I am still very limited in my skills, so I have had to explore the internet in order to discover various tutorials and examples that have led me on a positive path.
Right now I am working on a Google Mash-Up that will incorporate over 14,000 records, which will appear as separate markers that will have pop-up info bubbles with additional info inside (using html), once the marker is clicked.
Here is the XML script example that is used in the tutorial I am following:
<markers>
<marker lat="43.65654" lng="-79.90138" html="Some stuff to display in the<br>First Info Window"
label="Marker One" />
<marker lat="43.91892" lng="-78.89231" html="Some stuff to display in the<br>Second Info Window"
label="Marker Two" />
<marker lat="43.82589" lng="-79.10040" html="Some stuff to display in the<br>Third Info Window"
label="Marker Three" />
</markers>
...and this is how it looks when the file is retrieved by the java script and mapped: http://econym.googlepages.com/example_map3.htm
This is the java script that creates the Google Map. I have emboldened the section of the script that retrieves the data and parses it to create the markers:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Google Maps</title>
<script src="http://maps.google.com/maps?file=api&v=2&key=ABQIAAAA6GoL8P5zqjQlG5A5uM1ETBSUPozAscB0cY3RG8xEGnZyeom4axRySak889rVpvHYRsV4f9OZZzbboA"
type="text/javascript"></script>
</head>
<body onunload="GUnload()">
<!-- you can use tables or divs for the overall layout -->
<table border=1>
<tr>
<td>
<div id="map" style="width: 800px; height: 1200px"></div>
</td>
<td width = 200 valign="top" style="text-decoration: underline; color: #4444ff;">
<div id="side_bar"></div>
</td>
</tr>
</table>
<noscript><b>JavaScript must be enabled in order for you to use Google Maps.</b>
However, it seems JavaScript is either disabled or not supported by your browser.
To view Google Maps, enable JavaScript by changing your browser options, and then
try again.
</noscript>
<script type="text/javascript">
//<![CDATA[
if (GBrowserIsCompatible()) {
// this variable will collect the html which will eventualkly be placed in the side_bar
var side_bar_html = "";
// arrays to hold copies of the markers used by the side_bar
// because the function closure trick doesnt work there
var gmarkers = [];
var i = 0;
// A function to create the marker and set up the event window
function createMarker(point,name,html) {
var marker = new GMarker(point);
GEvent.addListener(marker, "click", function() {
marker.openInfoWindowHtml(html);
// save the info we need to use later for the side_bar
gmarkers[i] = marker;
// add a line to the side_bar html
side_bar_html += '<a href="javascript:myclick(' + i + ')">' + name + '</a><br>';
i++;
return marker;
// This function picks up the click and opens the corresponding info window
function myclick(i) {
GEvent.trigger(gmarkers, "click");
// create the map
var map = new GMap2(document.getElementById("map"));
map.addControl(new GLargeMapControl());
map.addControl(new GMapTypeControl());
map.setCenter(new GLatLng( 37.251699,-119.604315), 7);
*// Read the data from testXML2blackpoolformat.xml*
var request = GXmlHttp.create();
request.open("GET", "testXML2blackpoolformat.xml", true);
*request.onreadystatechange = function() {*
*if (request.readyState == 4) {*
var xmlDoc = GXml.parse(request.responseText);
*// obtain the array of markers and loop through it*
var markers = xmlDoc.documentElement.getElementsByTagName("ConnectoryRecord");
*for (var i = 0; i < markers.length; i++) {*
*// obtain the attribues of each marker*
*var lat = parseFloat(markers[i].getAttribute("lat"));*
*var lng = parseFloat(markers[i].getAttribute("lng"));*
var point = new GLatLng(lat,lng);
*var html = markers[i].getAttribute("html");*
*var label = markers[i].getAttribute("label");*
*// create the marker*
var marker = createMarker(point,label,html);
map.addOverlay(marker);
// put the assembled side_bar_html contents into the side_bar div
document.getElementById("side_bar").innerHTML = side_bar_html;
request.send(null);
else {
alert("Sorry, the Google Maps API is not compatible with this browser");
// This Javascript is based on code provided by the
// Blackpool Community Church Javascript Team
// http://www.commchurch.freeserve.co.uk/
// http://econym.googlepages.com/index.htm
//]]>
</script>
</body>
</html>
Here is my delima--
This is the xml format that I need to use because it can accept the rest of my excel file and loop it through the 14,000+ records to create a functioning xml file. This is just a sample (2 records) of the larger file:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<ConnectoryAug2008>
<ConnectoryRecord>
<lng>-117.03683</lng>
<lat>32.944505</lat>
<ConnectoryID>1</ConnectoryID>
<Name>$2.95 Guys</Name>
<StreetAddress>13750 Stowe Drive</StreetAddress>
<City>Poway</City>
<State>CA</State>
<Zip>92064</Zip>
<Marker>White</Marker>
<IndustryGroup>Technical Services</IndustryGroup>
<ConnectoryProfileLink>http://connectory.com/search/profile_view.aspx?connectoryId=1</ConnectoryProfileLink>
</ConnectoryRecord>
<ConnectoryRecord>
<lng>-117.272843</lng>
<lat>33.13337</lat>
<ConnectoryID>2</ConnectoryID>
<Name>(GLDS) Great Lakes Data Systems</Name>
<StreetAddress>5954 Priestly Drive</StreetAddress>
<City>Carlsbad</City>
<State>CA</State>
<Zip>92008</Zip>
<Marker>Orange</Marker>
<IndustryGroup>Technology</IndustryGroup>
<ConnectoryProfileLink>http://connectory.com/search/profile_view.aspx?connectoryId=2</ConnectoryProfileLink>
</ConnectoryRecord>
</ConnectoryAug2008>
This is the tutorial where I found the formatting techniques to successfully create the large xml file that will format/convert my excel file properly: http://www.mrexcel.com/tip064.shtml
These variables should appear as html in the info bubble:
<ConnectoryID>2</ConnectoryID>
<Name>(GLDS) Great Lakes Data Systems</Name>
<StreetAddress>5954 Priestly Drive</StreetAddress>
<City>Carlsbad</City>
<State>CA</State>
<Zip>92008</Zip>
<IndustryGroup>Technology</IndustryGroup>
<ConnectoryProfileLink>http://connectory.com/search/profile_view.aspx?connectoryId=2</ConnectoryProfileLink>
The "Marker" variable instructs Google Maps to label the marker with a particular color. I will be so grateful to the person(s) that helps me get through this wall that I have been hitting for a long time. It's very difficult without having the luxury of peers who know about these types of issues.
Thank you!!Here is the relationship: They both contain geographic coordinates that produce a point on a map. I will use the rest of the information in the second xml file (company name, address, link, etc.) to produce the information for the bubble that will pop up once the marker is clicked.
My problem is that I need to try to keep the second xml file in a relatively similar format, so the rest of my records will still be accepted. If I had a smaller amount of records I could place them directly into the javascript, but because there are so many records, I need to use an xml file that can be retrieved by the java script. I chose to use the second type of xml file because I can easily copy and past the 14,000+ records that are now in excel document.
After the xml issue is corrected I need to rework the javascript that is now emboldened so that it will read the new xml file correctly. I included the first xml file so that the readers will understand what type of xml format is currently being used to produce the markers in the tutorial map. -
Script to create synonyms for the tables of Oracle Applications
Team,
For Oracle Applications 11i on W2K, where might I find a script to create synonyms for all of the application tables? I would think there would be a standard script somewhere in one of the directories created during the install or on the CDs.
Thanks,
LutherJohn, it is ssome sort of a bleed, but in this case it's not the part that 'might be cut off' that matters; it's the part that still needs to be on the page. Yes, I meant it to be (virtually) not-noticeable for the casual reader. Of course you can make it part of the page design, that ought to ease up matters.
The amount pages shift horizontally because of binding is called "creep", and this depends on the type of binding and the thickness of the paper. You cannot adjust for creep unless you know exactly how much this is and how your book is going to be printed and bound.
Airkite:
But the book that you printed worked out alright? Was it done with a different method?
This was a simple outlined text, not an image. Through the inaccuracies of printing and binding combined, there were no straight edges *anywhere* but fortunately the lines were thick enough to let you mentally connect them
This was done (I'm sure) with the method you proposed.
There is an alternative way, but it's way more expensive (on the other hand, the result is impressive): after the entire process of printing, binding, and cutting, books are put in a clamp one at a time and fed through a silk screen printer, fore edge on top, and printed with whatever you like.
I know of the existance of this technique but I haven't seen a book done like this in years and have no clue at all of the costs involved (writing that down in one sentence makes me realize those two might be connected). -
Modify Script to Create User Role on Single Database.
Hi All,
Below is the script to create user role on database. Here problem is when I execute this script, it creates user role for all database within an instance and I want it to create user role only on 2 database say TEST1 and TEST2
Can anyone help me to modify the script?
--===================================================================================
-- Description
-- Database Type: MSSQL
-- This script creates a role called 'gdmmonitor' for ALL databases.
-- It grants some system catalogs to this role to allow Classification and Assessment on the database.
-- It then adds a user called "sqlguard" to all databases and grants this user gdmmonitor role.
-- before runnign this script
-- you MUST CREATE A SQL LOGIN CALLED 'sqlguard'
-- This sqlguard login doesn't need to be added to any database or given
-- any privilege. The script will take care of that.
-- Note:
-- If you wish to use a different login name (instead of 'sqlguard') you need to change
-- the value of the variable '@Guardium_user' in the script below;
-- (Look for the string: "set @Guardium_user = 'sqlguard'" and replace the 'sqlguard')
-- after runnign this script
-- Nothing to do, the script already creates the db user
-- User/Password to use
-- User: sqlguard (or any other name, if changed)
-- Pass: user defined
-- Role: gdmmonitor
--===================================================================================
PRINT '>>>==================================================================>>>'
PRINT '>>> Creating role: "gdmmonitor" at the server level.'
PRINT '>>>==================================================================>>>'
-- Change to the master database
USE master
-- *** If a different login name is desired, define it here. ***
DECLARE @Guardium_user AS varchar(50)
set @Guardium_user = 'sqlguard'
DECLARE @dbName AS varchar(256)
DECLARE @memberName AS varchar(256)
DECLARE @dbVer AS nvarchar(128)
SET @dbVer = CAST(serverproperty('ProductVersion') AS nvarchar)
SET @dbVer = SUBSTRING(@dbVer, 1, CHARINDEX('.', @dbVer) - 1)
IF (@dbVer = '8') SET @dbVer = '2000'
ELSE IF (@dbVer = '9') SET @dbVer = '2005'
ELSE IF (@dbVer = '10') SET @dbVer = '2008'
ELSE IF (@dbVer = '11') SET @dbVer = '2012'
ELSE SET @dbVer = '''Unsupported Version'''
IF (@dbVer != '2000')
BEGIN
-- This privilege is required to peform a specific MSSQL test.
-- Test name: SQL OLEDB disabled (DisallowAdhocAccess registry key)
-- Procedure execute: EXEC master.dbo.sp_MSset_oledb_prop
-- Purpose: To display provider property, not changing anything.
PRINT '==> Granting MSSSQL 2005 and above setupadmin server role'
EXEC master..sp_addsrvrolemember @loginame = @Guardium_user, @rolename = N'setupadmin'
END
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if they exist
CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL)
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND mbr.groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the role gdmmonitor on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the role gdmmonitor on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.spt_values TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysconfigures TO gdmmonitor
GRANT SELECT ON dbo.sysdatabases TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syslogins TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
-- Grant execute privileges to the role for MSSql Common
PRINT '==> Granting common EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON sp_helpdbfixedrole TO gdmmonitor
GRANT EXECUTE ON sp_helprotect TO gdmmonitor
GRANT EXECUTE ON sp_helprolemember TO gdmmonitor
GRANT EXECUTE ON sp_helpsrvrolemember TO gdmmonitor
GRANT EXECUTE ON sp_tables TO gdmmonitor
GRANT EXECUTE ON sp_validatelogins TO gdmmonitor
GRANT EXECUTE ON sp_server_info TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sql_logins TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
GRANT SELECT ON sys.server_role_members TO gdmmonitor
GRANT SELECT ON sys.configurations TO gdmmonitor
GRANT SELECT ON sys.master_key_passwords TO gdmmonitor
GRANT SELECT ON sys.server_principals TO gdmmonitor
GRANT SELECT ON sys.server_permissions TO gdmmonitor
GRANT SELECT ON sys.credentials
TO gdmmonitor
--This is called by master.dbo.sp_MSset_oledb_prop.
--By defautl it should have already been granted to public.
GRANT EXECUTE ON sys.xp_instance_regread TO GDMMONITOR
GRANT EXECUTE ON sys.sp_MSset_oledb_prop TO GDMMONITOR
END
-- Re-add the dropped members
IF EXISTS (SELECT 1 FROM #rolemember)
BEGIN
PRINT '==> Re-adding the role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- END of role creation on database
PRINT '==> END of role creation on: ' + @dbName
PRINT ''
-- Change to the msdb database
USE msdb
set @memberName = ''
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if it exists
TRUNCATE TABLE #rolemember
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM .dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the gdmmonitor role on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the gdmmonitor role on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
GRANT SELECT ON dbo.backupset TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
-- Grant execute privileges to the role for MSSql 2005 or above
PRINT '==> Granting MSSql 2005 and above EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON msdb.dbo.sp_enum_login_for_proxy TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
END
IF (@dbVer > '2000' and @dbVer < '2012')
--This sp is not available in SQL 2012
BEGIN
GRANT EXECUTE ON sp_get_dtspackage TO gdmmonitor
END
-- Re-add the dropped members
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Re-adding the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the temporary table
DROP TABLE #rolemember
-- END of role creation on database
PRINT '==> END of gdmmonitor role creation on: ' + @dbName
-- Role creation complete
PRINT '<<<==================================================================<<<'
PRINT '<<< END of creating role: "gdmmonitor" at the server level.'
PRINT '<<<==================================================================<<<'
PRINT ''
PRINT '>>>==================================================================>>>'
PRINT '>>> Starting application database role creation'
PRINT '>>>==================================================================>>>'
use master
DECLARE @databaseName AS varchar(80)
DECLARE @executeString AS varchar(7950)
DECLARE @dbcounter as int
set @dbcounter = 0
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases where name not in ('master', 'msdb')
and not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @dbcounter = @dbcounter + 1
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'PRINT ''>>> Starting MSSql ' + @dbVer + ' role creation on database: ' + @databaseName + ''' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'/* Variable @memberNameDBname must be declare within the string or else it will fail */ ' +
'DECLARE @memberName' + cast(@dbcounter as varchar(5)) + ' as varchar(50) ' +
'/*find any members of the role if it exists*/ ' +
'CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL) ' +
'INSERT INTO #rolemember ' +
'SELECT DISTINCT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr ' +
'WHERE usr.uid = mbr.memberuid ' +
'AND groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'/*Drop the Role Members If they exist*/ ' +
'IF EXISTS (SELECT * FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Dropping the role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Dropping member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_droprolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/*drop the role if it exists*/ ' +
'IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'BEGIN ' +
'PRINT ''==> Dropping the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_droprole ''gdmmonitor'' ' +
'END ' +
'/* Create the role */ ' +
'PRINT ''==> Creating the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_addrole ''gdmmonitor'' ' +
'/* Grant select privileges to the role for MSSql Common */ ' +
'PRINT ''==> Granting common SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON dbo.sysmembers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysobjects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysprotects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysusers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON dbo.syspermissions TO gdmmonitor ' +
'/* Check if the version is 2005 or greater */ ' +
'IF (' + @dbVer + ' != ''2000'') ' +
'BEGIN ' +
'/* Grant select privileges to the role for MSSql 2005 and above */ ' +
'PRINT ''==> Granting MSSql 2005 and above SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON sys.database_permissions TO gdmmonitor ' +
'GRANT SELECT ON sys.all_objects TO gdmmonitor ' +
'GRANT SELECT ON sys.database_principals TO gdmmonitor ' +
'GRANT SELECT ON sys.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON sys.database_role_members TO gdmmonitor ' +
'END ' +
'/* Re-add the dropped members */ ' +
'IF EXISTS (SELECT 1 FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Re-adding the gdmmonitor role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Re-adding member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_addrolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/* drop the temporary table */ ' +
'DROP TABLE #rolemember ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT ''<<< END of role creation on: ' + @databaseName + ''' ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT '' ''' +
'PRINT '' '''
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
-- Adding user to all the databases
-- and grant gdmmonitor role, only if login exists.
PRINT '>>>==================================================================>>>'
PRINT '>>> Add and Grant gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '>>> on all databases.'
PRINT '>>>==================================================================>>>'
USE master
/* Check if @Guardium_user is a login exist, if not do nothing.*/
IF NOT EXISTS (select * from syslogins where name = @Guardium_user)
BEGIN
PRINT ''
PRINT '************************************************************************'
PRINT '*** ERROR: Could not find the login: ''' + @Guardium_user + ''''
PRINT '*** Please add the login and re-run this script.'
PRINT '************************************************************************'
PRINT ''
END
ELSE
BEGIN
DECLARE @counter AS smallint
set @counter = 0
-- This loop runs 4 time just to make sure that the @Guardium_user gets added to all db.
-- 99% of the time, this is totally unnecessary. But in some rare case on SQL 2005
-- the loop skips some databases when it tried to add the @Guardium_user.
-- After two to three executions, the user is added in all the dbs.
-- Might be a SQL Server bug.
WHILE @counter <= 3
BEGIN
set @counter = @counter + 1
set @databaseName = ''
set @executeString = ''
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases
where not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'/*Check if the login already has access to this database */ ' +
'IF EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'/*Check if login already have gdmmonitor role*/ ' +
'IF NOT EXISTS (SELECT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr WHERE usr.uid = mbr.memberuid ' +
'AND mbr.groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'AND usr.name = ''' + @Guardium_user + ''') ' +
'BEGIN ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END ' +
'END ' +
'IF NOT EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'PRINT ''==> Adding user [' + @Guardium_user + '] to database: ' + @databaseName + ''' ' +
'execute sp_adduser [' + @Guardium_user + '] ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END '
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
END -- end while
-- Required for Version 2005 or greater.
IF (@dbVer != '2000')
BEGIN
-- Grant system privileges to the @guardium_user. This is a requirement for >= SQL 2005
-- or else some system catalogs will filter our result from assessment test.
-- This will show up in sys.server_permissions view.
PRINT '==> Granting catalog privileges to: ''' + @Guardium_user + ''''
execute ('grant VIEW ANY DATABASE to [' + @Guardium_user + ']' )
execute ('grant VIEW ANY DEFINITION to [' + @Guardium_user + ']' )
END
PRINT '<<<==================================================================<<<'
PRINT '<<< Finished Adding and Granting gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '<<< on all databases.'
PRINT '<<<==================================================================<<<'
PRINT ''
END
GOThanks a lot Sir... it worked.
Can you also help me in troubleshooting below issue?
This script is working fine on all databases except one MS SQL 2005 database. build of this database is 9.00.3042.00
SA account with highest privileges is been used for script execution. errors received are as follow:
>>>==================================================================>>>
>>> Creating role: "gdmmonitor" at the server level.
>>>==================================================================>>>
==> Granting MSSSQL 2005 and above setupadmin server role
==> Starting MSSql 2005 role creation on database: master
(0 row(s) affected)
==> Dropping the gdmmonitor role members on: master
==> Creating the role gdmmonitor on: master
Msg 15002, Level 16, State 1, Procedure sp_addrole, Line 16
The procedure 'sys.sp_addrole' cannot be executed within a transaction.
==> Granting common SELECT privileges on: master
Msg 15151, Level 16, State 1, Line 117
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 118
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 119
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 120
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 121
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 122
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 123
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 124
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 125
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 126
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
==> Granting common EXECUTE privileges on: master
Msg 15151, Level 16, State 1, Line 130
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 131
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 132
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 133
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 134
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 135
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 136
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission. -
Wiki - or even better a script - to create a PKGbuild from a PPA
i would like to test Conky manager, it is available for Ubuntu, and still not in AUR.
I said to myself, lets contribute with my first PKGbuild, but, I did not found a guide at Google, not at ARCH wiki too, at least not easily - perhaps it does exist but i did not found it quickly.
But perhaps it even would be easy if someone has just write an script to make and test PKGbuilds from PPAs, it must be simple if you know - I do not - and would save a lot of work.
Conky manager
http://bazaar.launchpad.net/~teejee2008 … runk/files
If some one want to make it as I do not how.Try searching the wiki a little more closely. On a related note, man pages > wiki. `man PKGBUILD`
As for scripts to create PKGBUILDs; that's a bit meta, don't you think? Why not just take a look at some of the PKGBUILDs in the AUR that use .debs or PPAs and go from there.
This probably belongs better in the PKGBUILD request subforum; but the way this should work is that you should give your best shot at creating a PKGBUILD, and then, when you get stumped, post what you have so far, and we'll all help you work out the kinks
All the best,
-HG
Last edited by HalosGhost (2013-07-08 15:59:26) -
Script to Create Folders Using Photoshop Scripting Mac/Windows
Can anyone help me. I want to create a script to create folders and run the script in Photoshop.
I am a real novice at scripting and I do not know if this can be done.
Thanks//Folder to create on the desktop
var folder1 = Folder("~/desktop/My New Folder");
//Check if it exist, if not create it.
if(!folder1.exists) folder1.create(); -
PowerShell Script to Create a Contact Card and Enable Email Forwarding
Exchange 2010
Can anyone help with creating a powershell script to create a contact card and set email forwarding at the sametime?
I'm looking to import a list of 200 users via a text or csv file, create the contact card with first name, middle initial if one exists, last name, (no alias) and put the contact card in the following OU "DIS###" in the a.b.c.com domain as well
as enable forwarding to @mail.com.
I've been able to create a script to enable mail forwarding but it doesn't help me without a contact card. I hate to put this upon anyone, but my ps scripting and Exchange knowledge is still in it's infant stage and I need get this done post hasteQ:Import csv: Does this contain 200 mailboxes name
A:It contains 200 user logon names.
For the mail forwarding:
I currently have a csv file with two columns -- one named displayname and the next call mailaddress. Under the displayname column I have the users account name (first.mi.last -- middle initial if they have one) and under mailaddress i have @mail.com.
script:
Import-CSV C:\setmailforwarding\mailforwarding.csv | foreach-Object{Get-Mailbox $_.displayname | set-Mailbox -forwardingAddress $_.mailaddress}
The above script should work if the contact card has been created. Obviously I need to create the card first.
I don't have a script to set up the contact card as of yet -- I was hoping to get some help on that.
Q:E-mail forwarding: Is this from mailboxes to mail contact, you will be creating
A:Not really sure what you are asking. I'm looking to create the contact card with a csv or txt file for first name, middle initial if one exists, last name, (no alias) and put the contact card in the following OU "DIS###" in the a.b.c.com domain as
well as enable forwarding to @mail.com. The users current email is @mail.1234.com and we will be migrating our mailboxes to another organization that uses @mail.com. I will need to set forwarding in the interim until the migration is complete.
Hope this helps. -
Script to create 2 column CSV and zip upon completion
I'm trying to to grab images or PDF's in a folder, add those containing "front" into the 1st column of a CSV, those containing "back" to the 2nd column and then zip/archive it upon completion. So far I'm using the following script, which add's all PDF/png files to the CSV in a single column.
How do I create column headers and add files containing "front" to the first column and "back" to the second?
Thanks in advance for the help.
do shell script "find ~/Documents/csvConvert/pngFiles \\( -iname '*.png' -or -iname '*.jpg' \\) -exec basename {} \\; | sed -e 's/.pdf$//' -e 's/.jpg$//' -e 's/^.*$/\"&\"/' > $HOME/Documents/csvConvert/Groups/PDFfiles.csv"I'm not sure how you are running the script e.g. Automator or in an Applescript. Because there are several steps involved I have just done it all in a shell script…
To use it copy & paste into a plain text file (TextWrangler is a decent free code editor with syntax highlighting - it makes life easier).
Save the file as paginator.sh
Make it 'executable' (only need to do this once). In Terminal…
chmod +x paginator.sh
Now you can run it by using…
paginator.sh
Obviously use the full path to the file in those commands (drag & drop the file to get Terminal to autofill it).
This is the script…
#!/bin/sh
# Output file
OUTFILE="${HOME}/list.csv"
# source folder with images
FILES="${HOME}/test/"
# Files for temporary storage of filename lists
FRONTLIST="${HOME}/list-front.txt"
BACKLIST="${HOME}/list-back.txt"
# list front & back into text files
find "${FILES}" \( -iname '*.png' -or -iname '*.jpg' \) -and -iname front\* -exec basename {} \; | sort -n > "${FRONTLIST}"
find "${FILES}" \( -iname '*.png' -or -iname '*.jpg' \) -and -iname back\* -exec basename {} \; | sort -n > "${BACKLIST}"
# Setup CSV with headings
echo "front,back" > "${OUTFILE}"
# Merge 2 list files with a comma
pr -m -t -s\, "${FRONTLIST}" "${BACKLIST}" >> "${OUTFILE}"
# strip pdf, jpg, png suffixes from the output file
sed -i '' -e 's/\.jpg//g' -e 's/.pdf//g' -e 's/\.png//g' "${OUTFILE}"
# remove temp files
rm "${FRONTLIST}" "${BACKLIST}"
In short it finds the front & back files (sorts then & saves that in two text files).
Then it merges them via 'pr' and removes the suffixes in one pass of the output file. I have removed the last piece of the sed (I'm unsure what it was for).
It saves into ${HOME}/list.csv Which is the users home folder
There are is room for improvement on this but it creates the csv as desired…
The sort will place front_10.jpg before front_1.jpg (You must use leading zeros on all your files - e.g. file_01.jpg, back_01.png…)
This does not account for nested folders! It will find files at every level! (you can add '-maxdepth 1' to stop find going into nested folders).
The output depends on the file names & if one file is missing the order goes out of sync (you should probably search for the correct 'back_' image & a pair them up correctly with extra logic).
The paths are 'hardcoded' (you can make it accept input so that you can pass the 'files folder' and the 'output file' name into it).
If this is all too complex you could try to re-purpose into an Automator or Applescript, but I think if you are calling repeated 'do shell script' actions it is a sign you could be using the shell itself. It can be wrapped up if you need to make it run like an application - or just give it a '.command' suffix & it should just launch Terminal & run when you double click the file.
Let me know what you think. -
Simple shell script to create linkedClones on stand alone ESXi host.
Hey Guys,
Last few days I have been working on creating linkedClones in bulk for some of the testing purpose. Since I did not had my vCenter up and running so I spend few minutes to write a simple script to create a linkClones on standalone ESX host.
My script create full clone of given VM, then creates snapshot on it and starts creating linkedClones from the delta vmdk files (it just create new directory for linkedClone VM's and copies those delta files to new location and then point it to base disk, nothing magic here ).
Now this script is working perfectly fine for me, and I can power on all the VM's which is pointing to base disk. Later I tried creating linkedClones using vCenter API's as well which seems to be doing the similar thing.
So I just want to check with you guys if my script is Ok or thats not the way to do it (this may be unsupported way of creating linkedClones but I just want a way to create linkedClones on standalone esxi host as I may not have vCenter server available everytime) ?Hi!
As long as your softsynths comes in the VSTi format (most of them do now), you can insert it on a track in Audition, which has 'host' capabilities from V3.
In the Multitrack, insert a new MIDI track from the 'Insert' menu (note: MIDI Track, not just 'MIDI').
On that track pane hit the 'Sequencer' button, and it will open in a separate window. In the pane left of the keyboard you can insert your VSTi of choice, and make your MIDI connections.
Back on the Main track pane, engage the 'L' button for Live monitoring. Actual recording (of MIDI) is done in the Sequencer window.
The usual, and recommended workflow is to keep the MIDI tracks 'open', i.e. you can edit the sound in your instrument and even the notes played at any time in the process, compiling the actual audio as the last step in the mixing.
If you kind of 'insist' on doing it the old way, you can export the audio from your recorded MIDI+VSTi creations track by track like this: Leave the Sequencer window open, make a selection in the multitrack that covers the time span you have played. Solo the track (will mute all others), and use File / Export Audio Mixdown. Use 'Master' as the source. This will give you a wave rendering of what's currently in the MIDI sequencer. Qualitywise this is better since it's all internal and digital instead of in/out of soundcards with DA/AD conversion etc.
I haven't found a method for a 'live' wave recording while you play, but there may be one...
If you purchase Audition it comes with Help files explaining this in more/better detail. ;) -
Question about DBCA generate script o create RAC database 2 node cluster
Question about creating two node RAC database 11g after installing and configuration 11g clusterware. I've used DBCA to generate script to create a rac database. I've set
environment variable ORACLE_SID=RAC and the creating script creates instance of RAC1 and RAC2. My understanding is that each node will represent a node, however there should only be one database with a name of 'RAC'. Please adviseYou are getting your terminology mixed up.
You only have one database. Take a look, there are one set of datafiles on shared storage.
You have 2 instances which are accessing one database.
Database name is RAC. Instance names are RAC1, RAC2, etc, etc.
Also, if you look at the listener configuration and if your tnsnames is setup properly then connecting to RAC will connect you to either one of the instances wheras connecting to RAC1 will connect you to that instance. -
Error While running WLST script to create SOA Domain in Clustered Environme
Hi,
I am trying to run WLST script to create SOA Domain in clustered environment.The script is as follows.
import sys
print "@@@ Starting the script ..."
global props
from wlstModule import *#@UnusedWildImport
from java.io import FileInputStream
from java.io import File
#=======================================================================================
# Create Boot Properties File
#=======================================================================================
def createBootPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/boot.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createNodeManagerPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/nm_password.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createAdminStartupPropertiesFile(directoryPath, args):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/startup.properties', 'w')
args=args.replace(':','\\:')
args=args.replace('=','\\=')
fileNew.write('Arguments=%s\n' % args)
fileNew.flush()
fileNew.close()
I am getting the error :
Problem invoking WLST - Traceback (innermost last):
(no code object) at line 0
File "D:\Oracle\Middleware\Oracle_SOA1\bin\SOADomainScript.py", line 11
adminserverDir = File(directoryPath)
^
SyntaxError: invalid syntax
Do i need to set any jar in the classpath? Already jython.jar is available in the classapath.
Thanks in advance.
Regards,
SubhaHi,
I am trying to run WLST script to create SOA Domain in clustered environment.The script is as follows.
import sys
print "@@@ Starting the script ..."
global props
from wlstModule import *#@UnusedWildImport
from java.io import FileInputStream
from java.io import File
#=======================================================================================
# Create Boot Properties File
#=======================================================================================
def createBootPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/boot.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createNodeManagerPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/nm_password.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createAdminStartupPropertiesFile(directoryPath, args):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/startup.properties', 'w')
args=args.replace(':','\\:')
args=args.replace('=','\\=')
fileNew.write('Arguments=%s\n' % args)
fileNew.flush()
fileNew.close()
I am getting the error :
Problem invoking WLST - Traceback (innermost last):
(no code object) at line 0
File "D:\Oracle\Middleware\Oracle_SOA1\bin\SOADomainScript.py", line 11
adminserverDir = File(directoryPath)
^
SyntaxError: invalid syntax
Do i need to set any jar in the classpath? Already jython.jar is available in the classapath.
Thanks in advance.
Regards,
Subha -
Creating an RDI file from SAP script
Hello All,
I would like to create an RDI file from SAP Script.
Please can anyone let me know how do we do it programmatically.
I am aware of the option of setting RDI parameter to 'X'.
However my requirement is to allow user to have a print preview option and simulatenously create RDI file .
Thanks and Regards
AmrutaSee:
http://discussions.apple.com/message.jspa?messageID=11535851#11535851 -
I want to create an intelligent file in my finder to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??
Thanks for your help.Take a look here: http://hints.macworld.com/article.php?story=20110314131100623
One of the comments suggests you can't use greater than or less than with the star rating in Finder.
You might try a Raw Query with the kMDItemStarRating.
In the criteria popup menu, select Other, then find the Raw Query entry.
You might have to play around with the syntax, but try "kMDItemStarRating >= 3"
Take a look here for query syntax: https://developer.apple.com/library/mac/ipad/#documentation/Carbon/Conceptual/Sp otlightQuery/Concepts/QueryFormat.html#//apple_ref/doc/uid/TP40001849-CJBEJBHH
Maybe you are looking for
-
Is there a way to use SharePoint 2010 Datasheet View in SharePoint 2013?
Quick edit mode doesn't meet users' requirement. They want the header freezing and column width adjustable like what they did in SharePoint 2010. I understand the Datasheet view is achieved by Access ActiveX control. Can this be used in SharePoint
-
How to determine most recent date from the date column of internal table
Dear friends would you like to tell me. how i determine the most recently changed record by looking at date and time from internal table i am not supposed to sort the table by date and time... I must check date and time with other records date and ti
-
Creating graph and DFS in a graph
Hello all, I have set of vertices in array and edges in linked list. Now i want to create a graph and do depth first search. Can anyone suggest me how to proceed. situ
-
PL/SQL Functions Signature ODBC
Hi All, I4m calling pl/SQL functions from ODBC. I have two functions with different signature: PACKAGE pgtest BEGIN function f1(p1 OUT NUMBER) -- Function A return NUMBER; function f1(p1 OUT NUMBER, -- Function B p1 OUT NUMBER,) return NUMB
-
Hi, I have created a new message type copying data from NEU. I create a condition for this message type with the dispatch time 3 (Send with application own transaction). It is working fine when I create a new PO. But when I change the PO and a new me