Scroll Bar in Table
h3. {color:#800000}*Hiii all,*{color}
h3. {color:#800000}*i notice that if i have a table with some rows, more than the height a scroll bar showed up, but if you use next button the scroll remain in the top but the selected row is next, until you go more than the height and the scroll remain at the top??*{color}
h3. {color:#800000}*how can this be fixed ????? any help in this ??*{color}
h3. {color:#800000}*Thanks every one* {color}:8}
In this case you should wait for net next release.
We had this discussion here before Re: how to get a pagination dropdown inside an ADF Faces Rich Client Table and there are more discussion I'm sure.
I remember that there is an ER filed which should make it the developers choice how to work with tables.
Timo
Edited by: Timo Hahn on 17.09.2008 11:41
Similar Messages
-
Remove vertical scroll bar from table control
hi,
i had used table control in my application. i want remove vertical scroll bar from table control.
At initial time in table control there is no vertical scroll bar. In my table control lines are dependent on internal table which i was used to fill it.
i was used these code for to set table control lines.
DESCRIBE TABLE IT_RISK_ZINRISEXC LINES EXC_LINE.
TC_RISK_EX-LINES = EXC_LINE .
Initially there is no data in internal table so there is no vertical scroll bar. After getting value i am filling internal table. and there is scroll bar in my table control. but i does not want that.
i was not selected RESIZING-VERTICAL OR -HORIZONTAL.Hi,
From Scroll Bars in Table Control
You can remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
or
You can get rid of the vertical scroll bars by not setting table control lines. This way the user can only see the visible lines of the table control. As for the horizontal scrollbar, just make sure that your table control doesn't contain too many fields.
Regards,
Raj. -
Scroll bar in table control without wizard
Dear All,
I have made a module pool program for gate pass. In which i have taken a TABLE CONTROL WITHOUT WIZARD. Now my problem is , the table control does not have the SCROLL BAR functionality. It is not showing the scroll bar also. So can any one of you can help with the code that i can use to bring that scroll bar.
Table control is without wizard.
Thanks & Regards
VijjuHi,
In PBO module write the code as,
data: fill TYPE i.
DESCRIBE TABLE itab LINES fill.
flights-lines = fill.
Flights is the table control name in screen and itab is the internal table name.
Regards
Haritha
Edited by: Haritha Teegala on Jan 6, 2012 7:53 AM -
How to activate the Vertival Scroll Bar to Table control
Hi All,
I Have created a Module pool table control(Wizard) with Input control,where user can enter the values in the screen.
In my screen 15 lines are visible,once i enter all 15 rows,vertical scroll bar is active,but rest of all lines are in deactivate mode.
My requirement is:Once i enter all the visible lines,the remaining lines should be in activ mode(In put control).
I appreciate your response.
Best Regards,
SeshadriDATA : BEGIN OF IT_MARA OCCURS 1,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
ERNAM LIKE MARA-ERNAM,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
V_FLAG TYPE C,
END OF IT_MARA.
DATA : WA_MARA LIKE it_MARA .
CONTROLS TABLE TYPE TABLEVIEW USING SCREEN 100.
MODULE POPULATE_100 INPUT.
CASE SY-UCOMM.
WHEN 'DISP'.
SELECT MATNR
ERSDA
ERNAM
MTART
MBRSH FROM MARA INTO WA_MARA .
APPEND WA_MARA TO IT_MARA.
ENDSELECT.
DESCRIBE TABLE IT_MARA LINES V_TEXT.
TABLE-LINES = V_TEXT.
CLEAR IT_MARA.
Regards..
Balaji ( assign if this helps u ..) -
Unable to set size and scroll bar to table components in visual web jsf
Hi Friends,
Good day all of you,
my requirement is to display multible tables in the same jsp page with same size.
if some tables have more columns than other tables then that table need horizontal scroll bar...Hi BalusC,
Good day,
we didn't use any CSS sheets.is there any other way to set. -
Hi,
How do I remove the vertical and horizontal scroll bars in the table control? I would like to use the Pg Up/Down buttons instead.
Thanks,
Mounika.Mounika,
You can add or remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
Regarding the Page up Page down...You need to add some extra code in your program to activvate that. Check the following program for example.
DEMO_DYNPRO_TABCONT_LOOP_AT
or try something like this
try something like:
CASE sy-ucomm.
WHEN 'P+' OR
'P++' OR
'P-' OR
'P--'
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
entry_act = tc-top_line
entry_to = tc-lines
last_page_full = 'X'
loops = loops
ok_code = sy-ucomm
overlapping = 'X'
IMPORTING
entry_new = tc-top_line
EXCEPTIONS
no_entry_or_page_act = 1
no_entry_to = 2
no_ok_code_or_page_go = 3
OTHERS = 4
ENDCASE .
Hope this helps
Vinodh Balakrishnan -
Vertical scroll bar in table control with wizrads
Hi,
Im working on a table control with a customised table. I created a table control with wizards. But vertical scroll bar is not working. How can i invoke vertical scroll bar and can any one provide the code for the all the operations on a table control like save,find,find next,change....Thanks in advance.
AvinashHi Avinash
move the records number of your internal table into field LINES of tablecontrol. So you should change the code generated by wizard in PBO, for example create a new module:
PROCESS PBO
MODULE SET_DATA_TO_T_CTRL.
LOOP..
ENDLOOP.
MODULE SET_DATA_TO_T_CTRL.
DESCRIBE TABLE ITAB LINE SY-TABIX.
<TABLECONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max -
Urgent!!!!Add a Horizontal Scroll Bar for Table Control
Hi Experts,
I want to have a Horizontal Scroll Bar on my Table control.
I tried with few properties for the Table UI Element but not able to solve it.
If any one who had already done this please help me out.
Thanks in advance..
Regards, Kishore KHI Koen,
Thanks for early Reply.
When I use this I get
Page Down ( ->!!, Arrown with lines pointing Down)
Page UP
Page Top ( ->, Arrown with lines pointing Top)
Page Down ( ->, Arrown with lines pointing Down)
But I need only Page top and Page down for this Table UI .
I think my question is clear enough.
Please let me know this also.
Thanks & Regards,
Kishore K -
Scroll bar in Table of Contents on iPad
The Table of Contents in my project is pretty long. However, when played on an iPad there is no scroll bar to indicate that there are more slides than what is initially seen in the Table of Contents (although you can still scrub through the Table of Contents). Is there a way to add a scroll bar to make it more obvious?
Hello,
Welcome to Adobe Forums
Do you have a MAC or Windows?
Which version of Adobe Captivate are you using?
Do you reproduce this issue on a blank project?
Any possiblity to share you project on [email protected]
Thanks,
Vikram
Adobe Support -
ADF - scroll bar in table.
Hi
I am using jdevloper 10.1.3.3
I have to make scrollbar in table region.not in page level.please let me know.how to do that.
please help meHi,
You could use the following to get scroll bars around your table. It may not be ideal as the scroll bar is for the entire table, so when you scroll your headers will also scroll.
You will need to hard code your height, and set some margin for vertical scroll bar in IE (thats why the 98% width!). But atleast its better than nothing..
<af:table width="98%" id="xx" ...
inlineStyle="overflow-x: hidden; overflow-y: auto;height: 450px;"
rows="15">
</af:table>
HTH
Jaimon -
Scroll bars on tables in dreamweaver CS4
hi all, please help, have done this before but some evades me now, need to do scroll bars on a table where the content is much longer than the page intended, please assist am using adobe dreamweaver CS4, would greatly appreciate, urgent
I think you would be much better off if you posted your question in the appropriate Dreamweaver forum, which you may find here:
http://forums.adobe.com/community/dreamweaver
This forum is only for discussing the forums themselves. -
Scroll bars within tables in dreamweaver cs4
please assist am trying to create scroll bars for content to be placed inside a table, the content i have is to long for page lenght, am using dreamweaver CS4
omedia.co.za wrote:
hi, osgood, thank for reply, i am novice and sorry but i still am not clear on what you mean, could you please explain in detail how to go about doing these scroll bars, greatly apprciate your time. :-/
Hummm........ not sure how much clearer I can explain it to be honest.
In your page where you need the scroll area to appear insert your mouse cursor.
Then switch to code view. You should see your cursor flashing between two <td> | </td> tags, (the table cell)
Where the cursor is flashing type in:
<div id="scroller"></div>
Then insert all the content that you need to scroll into the 'scroller' <div>
<div id="scroller">Your scrolling content to be inserted here</div>
Next copy the css below and paste it into the head section of your page directly before the closing </head> tag near the top of our page.
<style type="text/css">
#scroller {
width: 300px;
height: 200px;
overflow: auto;
</style>
Change the width and height to whatever suits your needs. -
How to handle scroll bar in table control in bdc
hi friends,
how to handle scroll bar coding in table control in bdc
Thanks & Regards,
Srinadh Dhi,
check the sites :
table control scrolling:
Scrolling in table control
Re: scrolling in table control
Table control - Vertical scrolling problem
table control scrolling problem -
I have a table within my webpage and I'd like to place
scrolling text within the diminsions of this table. I see it all
over the web but I can't find any easy way to do it in Dreamweaver.
I check the tutorials but I must be missing something. Anyone able
to direct me to a tutorial? Thanks.Hi -
Here is an article aimed at this subject:
http://www.avenuedesigners.com/blog/articles.php?ref=20
You can place the bit of code explained in the article inside
a table cell
if you wish. <div>'s CAN be nested inside tables, BTW.
HTH, take care.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"lisamaenot" <[email protected]> wrote in
message
news:e6u4v1$7t9$[email protected]..
>I have a table within my webpage and I'd like to place
scrolling text
>within
> the diminsions of this table. I see it all over the web
but I can't find
> any
> easy way to do it in Dreamweaver. I check the tutorials
but I must be
> missing
> something. Anyone able to direct me to a tutorial?
Thanks.
> -
Issue in table control scroll bar
Hi experts,
In Table control I used the following code,
Refresh control 'TCDATA' from screen '200'.
If i use this code i cant able to scroll the data when the table control having multiple lines.
Can any one suggest me?. what i need to do for this..
Edited by: sai.bala on Sep 17, 2010 12:22 PMHi ,
try this...
Refresh control 'TCDATA' from screen '200'.
"write this statement below refresh table control
* Describe lines of internal table to extend the table control Vertical
* scroll bar
DESCRIBE TABLE <tablename> LINES TCDATA-lines.
prabhudas
Maybe you are looking for
-
Error Message "Lightroon encountered an error when reading from its preview cache and needs to quit"
Error Message "Lightroon encountered an error when reading from its preview cache and needs to quit" It says thes everytime I try to open Lightroom and then quits the program. Help please--thanks
-
Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box' W
-
Reporting ME31 L Scheduling Agreements in Me2M
At my company were having a deli ma where I've implemented scheduling agreements in SAP R3. Its going great until we ran a report in ME2M. We report to the CFO expected delivery of incoming materials. Through ME2m and filtering ALLES "everything po
-
Hi all, i'm very angry because Update 10.7.3 in my MBP - early 2011; when I was updating it, a message appears with "unexpected error" ... so, update is unfinished... then I tried to open Mail, Address Book and other apps but they failed... look for
-
How to create a new security group and assignments of rigths?
Hi, In our current "Cisco Unified CM Administration System version: 7.0.1.11000-2" installation, we are a couple of administrators using the same user account to logon to the "https://10.10.x.x/ccmadmin/showHome.do" homepage. Where can I create a new