Scroll Bar not showing up

The scroll bar on the .pdf forms I have created only shows up when viewing the forms on a desktop computer. How do I get it to show up when viewing the forms on a laptop, tablet, etc.?

Hi,
I think you can first intall a Adobe Reader in your tablet, and then use it to open the PDF form.
Thanks,
Ying

Similar Messages

  • Scroll bar not showing relative size correctly

    I'm not sure of the correct terminology so please bear with me. In CS4 when I zoomed in on an image, the bar at the bottom would show the size of the image now on screen relative to the full size. i.e. if I go from 50% to 100% the bar would be half the size indicating that I am only seeing half the image. At least I think that was the case in CS4.
    Here's and example from CS6.
    Open an image, choose "Command-0" to make it fill the window, and the percentage is 48.16%. The bar at the bottom is not there, but if it was I assume it would fill the width of the window.
    I select "Command-+" to zoom in, and the percentage goes to 50%. The bar now fills about 30% of the window width indicating that I have zoomed in a whole lot, but I haven't. There is only a little bit of image on either side not visible, the rest is a huge grey area extending left right, and up and down.
    How do I make the bar indicate the true amount of zoom, and how do I get rid of that grey area?

    Yes, it's working as designed.
    There's a feature called "overscrolling" which allows you to scroll past the edge of the document, and it's only available when the document is larger than the displayable area.  You'll see it work if you zoom an image to be *just* larger than your space and use the (what seems like too-short) scroll bar.
    This inconsistency, between when the document will all fit in the displayable area, and when it exceeds the space, is the real root of the problem.
    People have complained about this for a long time, and Adobe doesn't listen.  Thing is, some folks would like to be able to scoll or pan to offset an image that DOES all fit so as to be able to comfortably sketch on the edge - or for whatever reason.  That would make it more consistent. 
    Here's a reproduction of the problem, and scroll of the image that's slightly bigger than the window to illustrate:
    Here the image all fits - no scroll bars:
    Here the image has been zoomed in a little more - the scroll bars have appeared and are about 1/3 the size of the image:
    Here the image has been scrolled almost to the limit of the horizontal scroll bar:
    It's working as designed. That doesn't mean the design is right,
    -Noel

  • TOC slide bar/scroll bar not showing on iPad

    Captivate 8
    HTML5/SWF output with scalable HTML content
    iPad Safari
    Desktop Safari and FireFox
    Hello.
    We've noticed that the TOC slide bar/scroll bar is not displaying via iPad.  It does show Desktop via Safari and FireFox.  Is there a setting we have missed perhaps?
    Many thanks

    Depending on your issue, making an appoint will be offered as an option by choosing "Take in for Service" (see http://www.macrumors.com/2014/11/07/apple-genius-bar-online/).  Of course, you could also just try calling your local Apple store.

  • Horizontal scroll bar not showing in PO

    Hi Experts,
    I'm unable to see the Horizontal scroll bar in PO item overview..so unable to see all the columns..is there any setting for that ???so that I can use it again ...

    Hi,
    Click 'Table Control Settings' icon (press the button on the top-right
    hand of the item details area you're referring to - the icon is 3
    columns with a a yellow first column)
    In the 'Administrator' area there is a setting here in the section
    'Further settings', with a field 'No. of fixed columns'.
    Check the value here.Make it to 2 and activate.You should be able to see the scroll bar now.
    Regards,
    Ashwini.

  • When loaded webpage shifted to right. scroll bar not showing

    When I open a website the page is shifted to the right and partly off screen so I cannot scroll up or down in the document.

    Q1: Does that happen with all sites including this one, or on particular sites?
    Q2: If you change the zoom level using one of these methods, does it make any difference?
    * On the application menu (click the "3-bar" menu button), try the + and - buttons
    * Hold down the Ctrl key and tap the + and - buttons on the keyboard
    Q3: Have you noticed any problems with secure certificate errors or sites missing content?
    More generally...
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • How do you tell if the advanceddatagrid scroll bars are showing?

    How do you tell if the advanceddatagrid scroll bars are showing? This is because the grid crashes when mouse scroll events are firing when theres not enough data so that scroll bars are not showing

    Basically when you have enough data in a datagrid so that it cannot all be displayed at once, you have the scrollbars showning allowing you to scroll.When you can see all the data or rows at once you cannot see the scrollbars. What I need to test for is whether these SB's are currently showning.
    Hope that is clearer.

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • Scroll option not showing in Adobe Muse

    Scroll option not showing in Adobe Muse CC v7.2

    This forum is actually about the Cloud, not about using individual programs
    For product specific questions you will do better in the specific product forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/muse

  • Scroll bars not appearing in jsf fragment

    Hi,
    In a jsf fragment I have a table in panel stretch layout. Scroll bars dont show up.
    Tried :
    1. wrapping table inside panelcollection.
    code pasted below
    Thanks,
    Nutan
    code:
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:c="http://java.sun.com/jsp/jstl/core">
    <c:set var="networkintegrityuiBundle"
    value="#{adfBundle['oracle.communications.activation.discovery.configuration.ViewScheduleDetailsBundle']}"/>
    <af:panelStretchLayout id="psl1" topHeight="33" inlineStyle="width:100%;">
    <f:facet name="center">
    <af:table value="#{configViewBean.scheduleList}" var="row"
    rows="#{bindings.schedules.rangeSize}" columnStretching="last"
    emptyText="#{bindings.schedules.viewable ? networkintegrityuiBundle.NO_SCHEDULES : applcoreBundle.TABLE_EMPTY_TEXT_ACCESS_DENIED}"
    fetchSize="#{bindings.schedules.rangeSize}"
    rowBandingInterval="0" id="t2" inlineStyle="height:100%;width:100%">
    <af:column sortProperty="description" sortable="true" align="start"
    headerText="#{networkintegrityuiBundle.DESCRIPTION}"
    id="c8">
    <af:outputText value="#{row.description}" id="ot7"/>
    </af:column>
    <af:column sortProperty="startDate" sortable="true" align="start"
    headerText="#{networkintegrityuiBundle.EFFECTIVE_DATE}"
    id="c10">
    <af:outputText value="#{row.startDate}" id="ot3"/>
    </af:column>
    <af:column sortProperty="startTime" sortable="true" align="start"
    headerText="#{networkintegrityuiBundle.START_TIME}"
    id="c11">
    <af:outputText value="#{row.startTime}" id="ot4"/>
    </af:column>
    <af:column sortProperty="frequency" sortable="true" align="start"
    headerText="#{networkintegrityuiBundle.FREQUENCY}"
    id="c9">
    <af:outputText value="#{row.frequency}" id="ot2"/>
    </af:column>
    <af:column sortProperty="recurrencePattern" sortable="true"
    headerText="#{networkintegrityuiBundle.RECURRENCY_PATTERN}"
    id="c12" align="start">
    <af:outputText value="#{row.recurrencePattern}" id="ot8"/>
    </af:column>
    </af:table>
    </f:facet>
    <f:facet name="top">
    <af:panelGroupLayout layout="default" id="pgl0001" inlineStyle="width:100%;">
    <af:panelHeader text="#{networkintegrityuiBundle.SCAN_SCHEDULES}" size="1"
    id="ph11235" inlineStyle="width:100%;" helpTopicId="ManScanSchedTabHead">
    <f:facet name="info">
    <af:outputLabel value="#{configurationView.serverTime}"
    id="ot99"/>
    </f:facet>
    </af:panelHeader>
    </af:panelGroupLayout>
    </f:facet>
    </af:panelStretchLayout>
    </jsp:root>

    This is parent page.
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:c="http://java.sun.com/jsp/jstl/core"
    xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
    <c:set var="bundle"
    value="#{adfBundle['oracle.communications.activation.discovery.configuration.ConfigurationDetailBundle']}"/>
    <c:set var="srbundle"
    value="#{adfBundle['oracle.communications.activation.integrity.ui.page.ScanRunBundle']}"/>
    <c:set var="common_bundle" value="#{adfBundle['oracle.communications.activation.discovery.configuration.CommonMsgBundle']}"/>
    <af:panelHeader text="#{bundle.PROFILE_DETAIL} #{bindings.name.inputValue}" size="1" id="ph2" helpTopicId="ScanResDispScanConfig"
    shortDesc="#{common_bundle.HELP_ICON_TITLE}">
    <af:panelTabbed id="ptdsf1" styleClass="AFStretchWidth"
    inlineStyle="width:100%;">
    <af:showDetailItem text="#{bundle.STATUS}" disclosed="true"
    binding="#{configurationView.statusDetails}"
    partialTriggers="timer" id="sdh1c234">
    <af:poll id="timer"
    interval="#{pageFlowScope.scanProgressData.pollInterval}"
    pollListener="#{pageFlowScope.scanProgressData.autoRefreshScan}"
    rendered="#{configurationView.configDetailRegion.visible}"/>
    <af:panelHeader text="#{configurationView.scanJobStatus}" id="ph22c1" size="0"
    inlineStyle="margin-left:10px;margin-top:10px;" helpTopicId="ScanResDispScanStatus">
    <f:facet name="toolbar">
    <af:commandButton text="#{bundle.DISPLAY_DISCREPANCIES}"
    disabled="#{!(data.ConfigurationDetailPageDef.discrepancyDetectionEnabled.inputValue)}"
    actionListener="#{configurationView.executeActionOnCommandButton}"
    partialSubmit="true" id="showDiscrepancies"
    visible="#{(data.ConfigurationDetailPageDef.jobStateString.inputValue)!='None' ? (data.ConfigurationDetailPageDef.discrepancyDetectionEnabled.inputValue) :(bindings.runReconciliationAsBoolean.inputValue)}"></af:commandButton>
    </f:facet>
    </af:panelHeader>
    <af:panelGroupLayout id="pgl129" layout="scroll">
    <af:panelGroupLayout rendered="#{(data.ConfigurationDetailPageDef.jobStateString.inputValue)!='None'}"
    id="pgls2" layout="horizontal">
    <af:panelHeader text="#{bundle.SCAN_PROGRESS}" size="1"
    inlineStyle="margin-left:10px;" id="ph117">
    <af:panelGroupLayout layout="horizontal" id="pglax3">
    <af:panelFormLayout rows="4" labelWidth="60"
    id="pfasdl2">
    <af:inputText label="#{bundle.TOTAL_ADDRESSES}"
    value="#{data.ConfigurationDetailPageDef.totalNoOfDiscoveryWorkItems.inputValue}"
    readOnly="true" id="isdt4"/>
    <af:inputText label="#{bundle.IN_PROGRESS}"
    value="#{data.ConfigurationDetailPageDef.noOfInProgressDiscoveryWorkItems.inputValue}"
    readOnly="true" id="itsd5"/>
    <af:inputText label="#{bundle.COMPLETED}" readOnly="true"
    value="#{data.ConfigurationDetailPageDef.noOfCompletedDiscoveryWorkItems.inputValue}"
    id="iscwt6"/>
    <af:inputText label="#{bundle.FAILED}"
    value="#{data.ConfigurationDetailPageDef.noOfFailedDiscoveryWorkItems.inputValue}"
    readOnly="true" id="isdfkt7"/>
    </af:panelFormLayout>
    <af:spacer width="10"/>
    <af:panelFormLayout rows="4" labelWidth="60"
    inlineStyle="height:90px;"
    id="status">
    <af:panelLabelAndMessage label="#{bundle.SCAN_COMPLETION}"
    inlineStyle="margin:20px 0px 0px; vertical-align:middle;"
    id="plamx211"
    labelStyle="vertical-align:top;">
    <dvt:gauge id="DiscoveryStatus" gaugeType="STATUSMETER"
    contentDelivery="immediate"
    inlineStyle="height:32px; width:120px;"
    value="#{pageFlowScope.scanProgressData.scanCompletionPercent}"
    gaugeSetDirection="GSD_DOWN" imageFormat="PNG">
    <dvt:gaugeBackground>
    <dvt:specialEffects fillType="FT_COLOR">
    <dvt:gradientStopStyle/>
    </dvt:specialEffects>
    </dvt:gaugeBackground>
    <dvt:indicatorBar fillColor="#0000ff"/>
    <dvt:gaugePlotArea/>
    <dvt:tickLabel content="TC_NONE"/>
    <dvt:tickMark content="TC_NONE"/>
    <dvt:topLabel position="LP_NONE"/>
    <dvt:bottomLabel position="LP_NONE"/>
    <dvt:metricLabel numberType="NT_PERCENT"
    position="LP_INSIDE_GAUGE">
    <dvt:gaugeFont bold="true" color="#c6c3c6"/>
    </dvt:metricLabel>
    </dvt:gauge>
    </af:panelLabelAndMessage>
    <af:inputText label="#{bundle.START_TIME}"
    value="#{bindings.discoveryStartTimeString.inputValue}"
    readOnly="true" id="isct1"
    inlineStyle="text-align:right;">
    <af:convertDateTime type="both" timeStyle="medium"/>
    </af:inputText>
    <af:inputText label="#{bundle.END_TIME}" readOnly="true"
    value="#{bindings.discoveryEndTimeString.inputValue}"
    id="itsdc2">
    <af:convertDateTime type="both" timeStyle="medium"/>
    </af:inputText>
    <af:inputText label="#{bundle.DURATION}" readOnly="true"
    value="#{bindings.discoveryDuration.inputValue}"
    id="itsdfc3"/>
    </af:panelFormLayout>
    </af:panelGroupLayout>
    </af:panelHeader>
    <af:panelHeader rendered="#{data.ConfigurationDetailPageDef.discrepancyDetectionEnabled.inputValue}"
    text="#{bundle.DISCREPANCY_DETECTION_PROGRESS}" size="1"
    inlineStyle=" margin-left:10px;" id="psch62">
    <af:panelGroupLayout layout="horizontal" id="pglax31">
    <af:panelFormLayout rows="4" labelWidth="60"
    id="pfasdl21">
    <af:inputText label="#{bundle.TOTAL_RESULTS}"
    value="#{data.ConfigurationDetailPageDef.totalNoOfDiscrepancyWorkItems.inputValue}"
    readOnly="true" id="itsc11"/>
    <af:inputText label="#{bundle.IN_PROGRESS}"
    value="#{data.ConfigurationDetailPageDef.noOfInProgressDiscrepancyWorkItems.inputValue}"
    readOnly="true" id="it1sx2"/>
    <af:inputText label="#{bundle.COMPLETED}" readOnly="true"
    value="#{data.ConfigurationDetailPageDef.noOfCompletedDiscrepancyWorkItems.inputValue}"
    id="it1c3"/>
    <af:inputText label="#{bundle.FAILED}"
    value="#{data.ConfigurationDetailPageDef.noOfFailedDiscrepancyWorkItems.inputValue}"
    readOnly="true" id="itsc14"/>
    </af:panelFormLayout>
    <af:spacer width="10"/>
    <af:panelFormLayout rows="4" labelWidth="60"
    inlineStyle="height:90px;"
    id="status1">
    <af:panelLabelAndMessage label="#{bundle.SCAN_COMPLETION}"
    inlineStyle="margin:10px 0px 0px 42px;"
    labelStyle="vertical-align:top;"
    id="plsdam2">
    <dvt:gauge id="DiscrepencyStatus" gaugeType="STATUSMETER"
    contentDelivery="immediate"
    inlineStyle="height:32px; width:120px;"
    value="#{pageFlowScope.scanProgressData.discrepancyCompletionPercent}"
    gaugeSetDirection="GSD_DOWN" imageFormat="PNG">
    <dvt:gaugeBackground>
    <dvt:specialEffects fillType="FT_COLOR">
    <dvt:gradientStopStyle/>
    </dvt:specialEffects>
    </dvt:gaugeBackground>
    <dvt:indicatorBar fillColor="#0000ff"/>
    <dvt:gaugePlotArea/>
    <dvt:tickLabel content="TC_NONE"/>
    <dvt:tickMark content="TC_NONE"/>
    <dvt:topLabel position="LP_NONE"/>
    <dvt:bottomLabel position="LP_NONE"/>
    <dvt:metricLabel numberType="NT_PERCENT"
    position="LP_INSIDE_GAUGE">
    <dvt:gaugeFont bold="true" color="#c6c3c6"/>
    </dvt:metricLabel>
    </dvt:gauge>
    </af:panelLabelAndMessage>
    <af:inputText label="#{bundle.START_TIME}"
    value="#{bindings.discrepancyStartTimeString.inputValue}"
    readOnly="true" id="isdt8">
    <af:convertDateTime type="both" timeStyle="medium"/>
    </af:inputText>
    <af:inputText label="#{bundle.END_TIME}" readOnly="true"
    value="#{bindings.discrepancyEndTimeString.inputValue}"
    id="itsc9">
    <af:convertDateTime type="both" timeStyle="medium"/>
    </af:inputText>
    <af:inputText label="#{bundle.DURATION}" readOnly="true"
    value="#{bindings.discrepancyDuration.inputValue}"
    id="it1sad0"/>
    </af:panelFormLayout>
    </af:panelGroupLayout>
    </af:panelHeader>
    <af:panelHeader rendered="#{data.ConfigurationDetailPageDef.discrepancyDetectionEnabled.inputValue}"
    text="#{bundle.DISCREPANCY_COUNTS}" size="1" inlineStyle=" margin-left:10px;"
    id="psch621">
    <af:panelGroupLayout id="pgl11" layout="horizontal">
    <af:spacer width="30" id="sse611199"/>
    <af:image source="/icons/critical_status.png" id="criticalImageId"
    shortDesc="#{bundle.CRITICAL}"
    inlineStyle="vertical-align:middle;"/>
    <af:spacer width="5" id="ssen6111"/>
    <af:outputText value="#{srbundle.CRITICAL}" id="ot3"
    inlineStyle="display:block;text-align:middle;"/>
    <af:inputText value="#{data.ConfigurationDetailPageDef.numberCritical.inputValue}"
    readOnly="true" id="it1lk6"/>
    <af:spacer width="60" id="sse6121"/>
    </af:panelGroupLayout>
    <af:panelGroupLayout id="pgl12" layout="horizontal"
    inlineStyle="margin-top:3px;">
    <af:spacer width="30" id="sse6112"/>
    <af:image source="/icons/major_status.png" id="majorImageId"
    shortDesc="#{bundle.MAJOR}"
    inlineStyle="vertical-align:middle;"/>
    <af:spacer width="5" id="ssen6112"/>
    <af:outputText value="#{srbundle.MAJOR}" id="ot26"
    inlineStyle="display:block;text-align:middle;"/>
    <af:inputText value="#{data.ConfigurationDetailPageDef.numberMajor.inputValue}"
    readOnly="true" id="it1lk7"/>
    <af:spacer width="60" id="sse61211"/>
    </af:panelGroupLayout>
    <af:panelGroupLayout id="pgl113" layout="horizontal"
    inlineStyle="margin-top:3px;">
    <af:spacer width="30" id="sse6113"/>
    <af:image source="/icons/minior_status.png" id="minorImageId"
    shortDesc="#{bundle.MINOR}"
    inlineStyle="vertical-align:middle;"/>
    <af:spacer width="5" id="ssen6113"/>
    <af:outputText value="#{srbundle.MINOR}" id="ot27"
    inlineStyle="display:block;text-align:middle;"/>
    <af:inputText value="#{data.ConfigurationDetailPageDef.numberMinor.inputValue}"
    readOnly="true" id="it1lk63"/>
    <af:spacer width="60" id="sse61212"/>
    </af:panelGroupLayout>
    <af:panelGroupLayout id="pgl114" layout="horizontal"
    inlineStyle="margin-top:3px;">
    <af:spacer width="30" id="sse61114"/>
    <af:image source="/icons/warning_status.png" id="warningImageId"
    shortDesc="#{bundle.WARNING}"
    inlineStyle="vertical-align:middle;"/>
    <af:spacer width="5" id="ssen6114"/>
    <af:outputText value="#{srbundle.WARNING}" id="ot28"
    inlineStyle="display:block;text-align:middle;"/>
    <af:inputText value="#{data.ConfigurationDetailPageDef.numberWarning.inputValue}"
    readOnly="true" id="it1lk64"/>
    <af:spacer width="60" id="sse61213"/>
    </af:panelGroupLayout>
    <af:spacer height="25" id="sse688"/>
    </af:panelHeader>
    </af:panelGroupLayout>
    </af:panelGroupLayout>
    <af:spacer width="10" height="10" id="sse6"/>
    </af:showDetailItem>
    <af:showDetailItem text="#{bundle.GENERAL}" disclosed="true" id="sdh1222">
    <jsp:include page="/oracle/communications/activation/integrity/ui/page/ConfigDetails.jsff"/>
    </af:showDetailItem>
    <af:showDetailItem text="#{bundle.PLUGIN_PARAMETERS}" disclosed="true"
    id="sdh1c23411">
    <af:panelHeader text="#{bindings.scanProfile.inputValue}" id="ph22c111">
    <af:switcher facetName="#{bindings.scanProfile.inputValue}"
    id="protocolParam" defaultFacet="default"
    binding="#{configurationView.scanProfile}">
    <f:facet name="SNMPDiscoveryScan">
    <af:region value="#{bindings.ViewSNMPParameters1.regionModel}"
    id="ViewSNMPParameters1"/>
    </f:facet>
    <f:facet name="SNMPMIB2Discovery">
    <af:region value="#{bindings.ViewSNMPParameters1.regionModel}"
    id="ViewSNMPParameters2"/>
    </f:facet>
    <f:facet name="SNMPCiscoDiscovery">
    <af:region value="#{bindings.ViewSNMPParameters1.regionModel}"
    id="ViewSNMPParameters3"/>
    </f:facet>
    <f:facet name="MIB2UIMInventoryImport">
    <af:region value="#{bindings.ViewUIMParameters1.regionModel}"
    id="ViewUIMParameters1"/>
    </f:facet> <f:facet name="UIMGatewayDiscovery">
    <af:region value="#{bindings.ViewUIMParameters1.regionModel}"
    id="ViewUIMParameters2"/>
    </f:facet>
    <f:facet name="default">
    <af:outputText value="#{bundle.DEFAULT_VALUE}" id="osct2"/>
    </f:facet>
    </af:switcher>
    </af:panelHeader>
    </af:showDetailItem>
    <af:showDetailItem text="#{bundle.SCOPE}" disclosed="true" id="sdh3s21">
    <af:switcher id="s1" facetName="#{bindings.derivedPluginName.inputValue}"
    defaultFacet="default">
    <f:facet name="default">
    <af:table value="#{bindings.addresses.collectionModel}" var="row"
    rows="#{bindings.addresses.rangeSize}"
    emptyText="#{emptyAddressText}"
    fetchSize="#{bindings.addresses.rangeSize}"
    columnStretching="last" rowBandingInterval="0"
    autoHeightRows="-1" inlineStyle="height:100%;width:99%;"
    binding="#{configurationView.addressTable}" id="tsdc2">
    <af:column sortProperty="address" sortable="true"
    headerText="#{bundle.ADDRESSES}" width="500" id="csfdc2"
    align="start">
    <af:outputText value="#{row.address}" id="otcs33"/>
    </af:column>
    </af:table>
    </f:facet>
    <f:facet name="Assimilation">
    <af:table var="row" rowBandingInterval="0" id="t3"
    columnStretching="last"
    value="#{bindings.assimilationAddresses.collectionModel}"
    binding="#{configurationView.assimilationAddressTable}"
    inlineStyle="width:99%; height:100%;">
    <af:column sortable="true" headerText="#{bundle.SCAN_NAME}" id="c14"
    sortProperty="name" align="start">
    <af:outputText value="#{row.derivedPluginType == null ? bundle.DELETED_PREFIX : ''}#{row.name}"
    id="ot9"/>
    </af:column>
    <af:column sortable="true" headerText="#{bundle.PLUGIN}" id="c15"
    sortProperty="pluginName" align="start">
    <af:outputText value="#{row.pluginName}" id="ot11"/>
    </af:column>
    <af:column sortable="true" headerText="#{bundle.PTYPE}" id="c7"
    sortProperty="derivedPluginType" align="start">
    <af:outputText value="#{row.derivedPluginType}" id="ot10"/>
    </af:column>
    <af:column sortable="true" headerText="#{bundle.DESCRIPTION}"
    id="c13" sortProperty="description" align="start">
    <af:outputText value="#{row.description}" id="ot12"/>
    </af:column>
    </af:table>
    </f:facet>
    </af:switcher>
    </af:showDetailItem>
    <af:showDetailItem text="#{bundle.SCHEDULE}" disclosed="true"
    inlineStyle="width:100%;height:100%;" id="sdi211s">
    <jsp:include page="/oracle/communications/activation/integrity/ui/page/ViewScheduleDetails.jsff"/>
    </af:showDetailItem>
    <af:showDetailItem text="#{bundle.BLACKOUT_WINDOWS}" id="ph1"
    inlineStyle="width:100%;height:100%;">
    <jsp:include page="/oracle/communications/activation/integrity/ui/page/ViewBlackoutWindowDetails.jsff"/>
    </af:showDetailItem>
    </af:panelTabbed>
    </af:panelHeader>
    </jsp:root>

  • Cant Get Scroll Bars to Show in iMac

    In one of my user account, I can't get the scroll bars to show!!!
    I want in preference-general and select ''Always'' under Show Scroll Bars, but I can't see them in Safari, Mail...
    When I close Preference, my ''Always'' selection is gone and it return to '' Automatically based on input device''
    Can you help?

    Do preferences in other programs run in this account stick? That is if you change a Safari preference or Finder preference in this account does the new settings remain?
    If in System Preferences you change Restore windows when quitting and re-opening apps does it stick?
    Try this:
    restart you machine holding down the option key while the machine reboots. You will be presented disk icons which allow you to choose which drive to boot off, select the Recovery HD.
    Once the system comes up in Recovery mode go past the language select screen and the select the Utilities menu item at the top of the screen. Select Terminal.
    In the open terminal window type resetpassword and press return. The Reset Password window will open. Select the root HD, then select the user account that is having the problem. Then at the bottom of the window select Reset Home Folder Permissions and ACLs
    Then quit Reset Password, quit Terminal then quit Mac OS X Utilities. The restart the machine.
    Try the System Preferences report back if that didn;t fix the problem.
    good luck

  • My iphone problem is network bar not show for searching why how can resolved my iphone

    my iphone problem is network bar not show for searching why how can resolved my iphone
    my iphone model is MD239B/A
    my iphone serial no: DQ******TD2
    <Edited by Host>

    Hi mirza_ali,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    iOS: Understanding cellular data networks
    iPhone: Wireless carrier support and features
    I hope this information helps ....
    Have a great day!
    - Judy

  • When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

    Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

    Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
    I am also receiving a warning message "WARNING: Parental control appears compromised!".

  • Horizontal scroll bar not appeating in af:treeTable

    We have an af:treeTable component in a popup with two af:column.
    Issue:
    1. af:treeTable is not showing horizontal scroll bar. When i set the width to a fixed value say 1000 on af:column c171, it shows scroll bar but the size is fixed.
    This is not the solution, because if the length of #{node.TerrDimMemberHierarchy} exceeds this size again some portion of it becomes invisible.
    Question:
    1. How can i make horizontal scroll bar appear in tree table. And also it should grow or shrink depending upon the length of #{node.TerrDimMemberHierarchy}
    data.
    <af:treeTable rowBandingInterval="0" id="tt2"
    fetchSize="25"
    inlineStyle="width:38em; height:28em; border-width:1px; border-style:groove;"
    partialTriggers="::dimensionDropDown ::searchButton ::cb5"
    rowSelection="multiple"
    value="#{backingBeanScope.ManageTerritoriesBean.dimensionMemberSearchTreeTableTreeModel}"
    var="node"
    visible="#{pageFlowScope.searchString != null ? (pageFlowScope.viewInHierarchyBtnLbl == null ? true : false) : false}"
    columnStretching="column:c171"
    binding="#{backingBeanScope.ManageTerritoriesBean.dimensionMemberSearchTreeTable}"
    summary="#{salesterrmgmtterritoriesuiGenBundle['OLabel.AvailableDimensionMembers']}"
    immediate="true"
    selectionListener="#{backingBeanScope.ManageTerritoriesBean.dimensionMemberSearchTreeListener}"
    styleClass="AFStretchWidth">
    <f:facet name="nodeStamp">
    <af:column sortable="false" id="c14"
    rowHeader="unstyled"
    headerText="#{salesterrmgmtterritoriesuiAttrBundle['ColAttr.Name.DimensionName.MOTTERRDIMENSIONSVL.NAME']}">
    <af:outputText value="#{node.Name}" id="ot15"/>
    </af:column>
    </f:facet>
    <af:column sortable="false" id="c171"
    headerText="#{dlBndl.PATH}"
    styleClass="AFStretchWidth">
    <af:outputText value="#{node.TerrDimMemberHierarchy}"
    id="ot16"/>
    </af:column>
    </af:treeTable>
    Edited by: sekare on Aug 29, 2011 4:01 AM

    can u remove the styleClass="AFStretchWidth" for af:column
    AFStretchWidth is for table or treetable to stretch.. not for columns
    <af:column sortable="false" id="c171"
    headerText="#{dlBndl.PATH}"
    styleClass="AFStretchWidth">

  • Scroll in safari, Scroll bar not working in Safari

    Scroll bar does not show up in Safari. Worked fine until last update. Works fine in Firefox. www.scottlerman.com

    For an iOS device ?  >>   https://itunes.apple.com/us/app/ip-cam/id333208495?mt=8
    If so, check out the app developer's site for support >  http://www.senstic.com/iphone/ipcam/ipcam.aspx

  • Scroll Bar Not Visible

    New look utilizes a dark gray scroll bar on a black background. Older monitors (non HD) do not show it at all and tablet PC can't be viewed in sunlight. Really Spotify you didnlt think about making it a more contrasting color.

    tutimm - NOW WE NEED JESUS CHRIST involved to get a scroll bar we can see?!!!! lol....this is terrible customer service. they should beta test this stuff omggggggggggosh. SOMEBODY gave SOMEBODY all artsy and crap WAY TOO MUCH power in this decision. And it's taken OVER A YEAR TO FIX because it costs too much or not enough people complaining.  It functionally works and they don't realize HOW MANY TIMES I GIVE UP and just kill the SPOTIFY session out of frustration... I can't see to add a song to a certain playlist because HEAVEN HELP ME I have to find the scroll.  so.....options?   Clearly complaining here is NOT helping.  So, seems we can always  UNINSTALL   and gripe on the way out.  That's my next plan if this continues.  Software without customer service won't survive.  And there's plenty of other software NOT tied to facebook-google-yahoo-government tracking software ...  They read these blogs looking for pitfalls they can avoid and can use Spotify's faults to springboard off of for a marketing campaign.  Not hard to figure where this is heading.

Maybe you are looking for

  • HP PSC 1510 All in One Printer

    My all in one printer won't feed the photo paper into the printer even though I have changed all the settings to "best" and "glossy."  I have shut the printer down, unplugged it and it still won't work.  I read that you an use a "HP Paper Feed Cleani

  • Release product serial number for final cut studio

    i bought an imac. gonna take it back. installed final cut studio. how can i unlock the key for the next computer? do i have to contact apple to release it?

  • Oracle Universal Installer version  10.10.4.0. Production

    Hello I am currently a student learning to use this software and I downloaded 'Oracle SOA Suite 10g Software Downloads' from the link http://www.oracle.com/technology/software/tech/webservices/index.html but I cannot log into sql plus and after openi

  • Error: Reading Credit Master Data in IC

    We are having trouble reading credit master date in the Collection Factsheet tab on the Navigation Bar of the IC. Does anyone have any ideas? Thanks.

  • IPhoto having compatibility issues with Chrome and IE

    I created a photo album to upload on my website using iPhoto '11. I was successful in uploading and can see the album in Safari. However, if I open the link in Chrome or IE, I just see a blank area where the slideshow should be and the "play slidesho