Scroll bar not working..help me.

i have a form with vertical scroll bar on it..in browsing to some other records using the mouse it does not sroll up or down, yet if I use the down key or up-key (keyboard) it works. What is the possible way to make the vertical scroll bar works. your immediate response will be highly appreciated.

In Forms 6.0 using Frames the toolbar properties is in the frame properties.
In Forms 4.5 or 6.0 without frames the toolbar's properties is in the data blocks properties.
The scroll bar canvas must be in the same canvas that the data block.
Martin Medina

Similar Messages

  • Scroll bar not working

    Hi Flash gurus, I have created flash web page, When i press
    left button of mouse on flash area, Internet Explorer's Scroll bar
    does not work, when i press html area, scroll bar works, Help me
    Flash gurus, what is the problem, I want somebody help with this,
    that if i press any area that internet explorer's scroll bar will
    work, where is the problem

    Change window mode is window or none.in the HTML page
    don't give opaque windowless or transparent windowless
    Regards
    sathish

  • Scroll Bar Not Working In IE

    So yea, it simply doesn't work. It's there, but when I go to
    use the arrows they don't work; using the scroll bar I end up
    moving the image behind it; using my scrollerball on my mouse
    doesn't make it move either.
    <div class="style1" id="ClubRulesList" style=" width:
    700px; height: 330px; z-index: 1; position: absolute; left: 251px;
    top: 209px; overflow: auto;">
    Thank you for any help!

    Huh?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Nefarious2All" <[email protected]> wrote in
    message
    news:g2c42v$3ri$[email protected]..
    > So yea, it simply doesn't work. It's there, but when I
    go to use the
    > arrows
    > they don't work; using the scroll bar I end up moving
    the image behind it;
    > using my scrollerball on my mouse doesn't make it move
    either.
    >
    > <div class="style1" id="ClubRulesList" style=" width:
    700px; height:
    > 330px;
    > z-index: 1; position: absolute; left: 251px; top: 209px;
    overflow: auto;">
    >
    > Thank you for any help!
    >

  • Scroll in safari, Scroll bar not working in Safari

    Scroll bar does not show up in Safari. Worked fine until last update. Works fine in Firefox. www.scottlerman.com

    For an iOS device ?  >>   https://itunes.apple.com/us/app/ip-cam/id333208495?mt=8
    If so, check out the app developer's site for support >  http://www.senstic.com/iphone/ipcam/ipcam.aspx

  • Scroll Bars Not Working Properly with Multiple Displays

    Do the following on a laptop that supports having the desktop spread across multiple monitors. Display 1 is the laptop screen, Display 2 is an external monitor.
    Open a SQL*Developer window in Display 2.
    Open a SQL Worksheet.
    Run a query that produces more rows than will fit in the results window, e.g. "select * from user_objects".
    Click, hold, and slide the vertical scroll bar handle downward in the results tab.
    The rows do not scroll. Garbled characters appear in the last row.
    Move the window to Display 1. The scroll bar works properly. Rows scroll up and down and no garbled characters appear.
    Note that the horizontal scroll bar produces garbled characters as well.
    (SQL*Developer 1.2.1 32.13; Win XP Pro, Oracle XE)

    These sort of issues can often be fixed by some combination of
    - getting the latest device drive for your graphics card
    - using java 6
    - specifying -J-Dsun.java2d.ddoffscreen=false as a command line argument for sqldeveloper.
    - specifying -J-Dsun.java2d.noddraw=true as a command line argument for sqldeveloper.
    You can also add vm options to you sqldeveloper.conf file using the "AddVMOptions -D..." directive

  • Scroll bars not working in Finder

    I cannot drag the scroll bars in Finder windows on a Macbook with 10.4.8. I can scroll with 2 fingers, or with the arrow keys or the arrows at the bottom of the window. But dragging the scrollbar does not work.
    It works properly in Mail.app, Safari, Tex Edit Plus and probably others but not in GraphicConverter or the Finder.
    Any clues? Apple phone support had none.
    thx

    Did they suggest running Disc Utility to repair your permissions ...also, you might try running your maintenance scripts with Onyx and then restarting to see if that clears things up.
    You might also try deleting your finder .plist by trashing the file...
    User/Library/Preferences/com.apple.finder.plist
    Macbook 1.8-)   Mac OS X (10.4.8)   Week 38 base model w/1G Ram

  • ALV-Horizontal scroll bar not working

    Hi,
    I have one ALV.  There are 3 fields.  First 2 fields are key fields and the third field is of type string with length 3000.  The problem is I cant scroll the grid horizontally though the scroll bar is there.  
    where to use this method set_scroll_info_via_id() ?
    Regards,
    Sunil

    HI Sunil,
    If it is normal ALV the Vertical and Horizantal bars will enable automatically...
    while fililng the filed catalog you use the parameter "OPTIMIZE"....
    ie
    wa_filedcat-COL_OPT = 'X'.
    for better understanding..refer to this.
    Re: Cursor in ALV container
    hope it works..
    Thanks!
    Edited by: Prasanth on Mar 23, 2009 11:32 AM
    Edited by: Prasanth on Mar 23, 2009 11:36 AM

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • Scroll is not working when results seen trhu SP01.

    Hi all,
    I have observed an issue , in one of mine report, when I see list using SP01 spool list , Scroll is not working.
    I have used   SET LEFT SCROLL-BOUNDARY . It is working if i run this report in Foreground.. but my need is to schedule that report, and see the results thru SP01. using SP01 Freezing is not working.
    Any one have any idea about this, please do help me out.
    Thanks in Advance.

    Hi,
    None of the interactive functions will work once the output is on the static spool.
    Regards,
    Darren

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

    i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
    i updated my ipad in ios 6

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • Why is the scroll function not working after accessing the voice feature in settings?

    Why is the scroll function not working after accessing the voice feature in settings?

    For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
    If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
    Set the current key and tempo, name the loop, and save the loop.
    Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
    You will be able to transpose the sample as described above, like a regular loop.
    For example - a audio file turned into a loop and transposed:

  • Lower volume button control not working help?

    Lower volume button control not working help?

    If you only restored from backup, restore to factory defaults/new iPod.  If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • When I set a panorama picture as my wallpaper, the live scrolling is not working. Anyone else having this problem?

    When I set a panorama picture as my wallpaper in my iPhone 5, the live scrolling is not working. Anyone else having this problem?
    Please help me to solve this

    Everyone is having the "problem".
    That beta feature is not in the final release of iOS 7.

  • Scroll wheel not working in Mavericks

    Update to OS X Mavericks resulted in mouse scroll wheel not working any more at all in any application.  Any suggestions for get scroll wheel function working would be appreciated.  Thanks!

    Just to understand the sequence: you have this problem when you are in a Firefox tab, click a link, and it opens in a:
    * new window
    * new tab
    * same tab
    I'm guessing a new window. Since the title bar area is a bit faded, some other window must have the focus, but which one?? If you press and hold the Alt key and press and release the Tab key, you should get the visual Task Switcher pane. The icon to the left of the current highlighted icon indicates the window that had the focus. If you then click that first icon, is it another Firefox window, or some other app?

Maybe you are looking for

  • Pop/Imap retrieving and redistribute in LAN with OsX Server

    It's possible to download mail accounts hosted in my isp and redistribut'em in my lan with OsX Server with it's own mail server? The scope is not to have a local server mail because we have ADSL and sometimes the line broke up... We prefere have mail

  • Is graphic card upgrade on Satellite L300-21W possible?

    Hi! I`m thinking to buy Toshiba Satellite L300-21W but i wat to play some games on it like Cod2 but I think that her serial graphic card is weak so my question is: " CAN I REPLACE GRAPHIC CARD WITH BETTER ONE OR NOT( and with which one if you know)!?

  • What can Power BI Replace ?

    Being new to Power BI have few basic questions... 1. What is Power BI suppose to replace from Legacy Microsoft BI tools - Performance Point Server?  2. Is Power BI an Enterprise analytic, reporting, dashboard tool ? Where does Power BI fits in Enterp

  • Blue line on the screen of my new Iphone4, pls help!!!

    I bought one Iphone4 at London, yesterday I try to power on and find out that there is a blue line on the right of the screen. Please help me, I do not know how to post photos here. If you want to see the phenomenon, please send me email. Another que

  • Sales order fields description chage

    How to change  the description from customer group 3 to INSURANCE in sales order -header- additional data A tab