Scroll Bar removal from Jive Forums

Hi
We are currently on Netweaver 7.0 SP15. We have downloaded Forums from service market place and deployed into our landscape. All the functionallities are working fine except that I get additional Vertical Scroll Bar.
Has anyone else implemented this and we are using Light Framework Page.
please advice.
Thank you
Regards
Krishna Kanth

Hi Krishna,
Can you tell me how u have removed the vertical scroll in Jive forums.
Thanks in advance,
Regards,
Rudradev Devulapelli.

Similar Messages

How do I prevent scroll bar use from disabling front panel updates?

I have two top-level VIs running simultaneously using different execution systems. The first VI has a list box scroll bar. When the scroll bar is used by the operator, updates to the second VI front panel are temporarily blocked. This is due to the single user interface thread shared by both VIs. I there anyway to allow the second VI to update its front panel while the first VI is bound to its scroll bar?

Hi,
Your problem seems to be a bit more complex. I created two vi's, one with a simple loop, the other with a list box (both running in different execution systems). The first isn't noticeably affected by moving the listbox' scrollbar.
It there an increase in processor load when you move the scrollbar? That could stop the other vi from updating. Perhaps you can isolate the problem (remove all irrelevant code) and post the remaining vi's?
Regards,
Wiebe.
"wwwbrown" <[email protected]> wrote in message news:[email protected]..
I have two top-level VIs running simultaneously using different execution systems.  The first VI has a list box scroll bar.  When the scroll bar is used by the operator, updates to the second VI front panel are temporarily blocked.  This is due to the single user interface thread shared by both VIs.  I there anyway to allow the second VI to update its front panel while the first VI is bound to its scroll bar?

Issues converting scroll bar components from AS2 to AS3

I am working on editing a document that has scroll bar components that I would like to convert from AS2 to AS3 since everytime I try to open the document it shows a WARNING and won't convert them and when I publish and look at the final document the scroll bar seems to act unusally since it is obviously still on AS2.
Here are two of the scripts I finally was able to find within it. Should I fix it and how so? This first is for the "Creative Scroll Area" and the second is for the "Creative Scrollbar"
package {
          import flash.display.MovieClip;
          public class Creative Scroll Area extends MovieClip {
                    public function Creative Scroll Area() {
                              // constructor code
package {
          import flash.display.MovieClip;
          public class Creative Scrollbar extends MovieClip {
                    public function Creative Scrollbar() {
                              // constructor code

Okay, well I know the code is making a scroll bar and a scroll area and under the "type" it says they are "compiled..." which is unusual since most of the other components I've worked with have been movie clips or bitmaps. Do I need to look up what AS3 components I need to replace the script from above? Because when I looked for that I couldn't specifically find what I needed or really understood if I was looking at the right information.
Here is something I found when trying to "debug" it:
WARNING: The component 'UIScrollBar' requires ActionScript 2.0, which is not supported in this version of Flash Professional.
WARNING: The component 'Creative Scrollbar' requires ActionScript 2.0, which is not supported in this version of Flash Professional.
WARNING: The component 'Creative Scroll Area' requires ActionScript 2.0, which is not supported in this version of Flash Professional.

Mail send error from Jive forum

Hi Gurus,
I have a problem:
in our portal implemented a jive forum, but we cannot send any mail from forum. The portal send mail (e.g. if I create a new collaboration room, I get the invite mail).
What should I configure to repair this bug?
Thanks for your helps

Hi Dwa,
the configuration for the email notification of the Forums can be found in the Administration console from the forums (the Forum Administrator has it).
Explanation is available in [documentation|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/9ab759aa3d3ac0e10000000a155369/frameset.htm].
good luck,
anja

Guest user logging on automatically from jive forums quick link

Hi,
we are facing two problems with Jive Forums
1. Whenever I am trying to acecss Jive forums using the quick link it is automatically logging in with Guest user
2. I can see that no formatting is available this means I can see forms like general text not at all formatted.
could anybody let me know the solution. we are on EP 7.0 SP19
Thanks
Karunakar.M

problem resolved

Removing the Vertical scroll bar from the content area.

Hello,
Is there a way to remove the vertical scroll bar from the content area?
I am trying to create a new light portal frame work.
Everything works fine except that I see two vertical scroll bars, one from the content area and another from the page(frame).
Thanks in advance.
-Sudheer

Hi
There are a couple of ways in which to achieve this
1) Try and make the content flat. What I mean by this is that the content area (when using the standard light framework) doesn't contain an iframe, meaning that the iview defined on the page has "EMBEDDED" isolation mode. This should mean that you only have one scrollbar (if the content extends past the size of the browser)
2) If you need to make the iview URL isolation, then try and get the domain of the content to be of a similar domain to your portal server, i.e. your portal is portal.company.com and the content is content.company.com. In this way you can make the pages expand.
NOTE: One thing to note is that when using URL isolation iviews doesn't allow the automatic expanding of the iframe content. This is because the standard javascript doesn't allow this. Therefore you may have to write your own javascript function (or content area page) to do this
I hope this helps
Darrell

Removed from forum

All of my previous pleas for help have been removed from this forum as a punishment for trying to get help.
I have escalated the failures of this forum, and the Corporate Service team are now trying to make some sense of it all.
If you want help surf the net and get a Director or CEO involved, this lot will leave you loosing the will to live!!
I can't give details for fear of further punishment. Does this remind you of anything? 1984 perhaps!!

Thanks for your comments chaps, you are quite right. But the chap who took me off does not accept replies, hence the post.
As for the details, they have had the details several times. If you put details such as fault numbers or reference numbers you will get an email telling you not to as they want to hide the real problems. The system is 'Broke', either by bad management or design!
Still no phone though and still unbelievably frustrating to obtain any meaningful communication with this lot. Apparently 5th of Jan to now 30th Jan is acceptable service? Oh and if I do not hear from them in 14 days I am allowed to remind them that the fault has not been repaired, wow what a privilege.
It is strange that their Headquarters will give a contact name, number and email address but Customer services will not!!
I am dealing with them now, so good bye, and good luck.

Bring back traditional scroll bars and arrows

Why would Apple change a fundemental part of the UI? Removing scroll bars and arrows from the UI is unacceptable in my view. I understand you can restore scroll bar functionality from system preferences but having the arrows on certain apps is very helpful. What possible reason or improvement could warrant this action?
-LB

I'm a Wacom tablet user for many yeras, an not planning to get a Magic Mouse ($60.89) or Magic Trackpad ($96.03).
Why? Till 10.6.8 it work fine. It looks to me that Apple wants te sell more of there Mouse and Trackpads.
Just bring back traditional scroll bars and arrows as a option.
Apple starting to look like Microsoft. "We know what's best for you".
Just give the OSX users a option. I'll wait for a OSX update or for some one how writes a nice small utility to bring theme back. He/She will be a hero.
A said Lion User

Scroll bar in iTunes?

I have the latest version of itunes installed on my laptop and when I connect a device to sync the scroll bar doesn't seem to be there to allow me to move down the page on the Summary tab - can anyone help?

I found this answer on http://www.thetechgame.com/Forums/t=4653309/problems-with-itunes-11-scroll-bar-f ix-here.html
Well I and many other consumers have recently updated to iTunes 11 and found that our scroll bar disappears from view when iTunes is launched and need to manually re-size the window to show the scroll bar. Well after a few minutes of messing about I have encountered a fix what will show the scroll bar.
Step 1) Close any open iTunes windows.
Step 2) Find the iTunes.exe wherever you installed it to. (Mine is on my desktop).
Click to View Content
Step 3) Right-click iTunes and press properties.
Step 4) Click on the "Shortcut" tab and change "Run" from normal window to minimized.
Click to View Content
Step 5) Open iTunes and use as normal.
Your scroll bar should now be sorted out and be ready for use once again.

Table control scroll bar issue

how to set the scroll bar for table control for the transaction code va42 for billing plan tab.
i have added few custom fileds for the table control, when i m re-arranging the columns for the table control, the scroll bar is fixed for one field( as standard) and the scroll bar starts from that place. how to fix the scroll bar or control the scroll bar and sets it position for the desired column.

HI,
Table control ahs a property called FIXED_COLS. You ave to pass the column number to this property.

Need to avoid scroll bar inside PanelDash Board

Hi,
I am using Jdeveloper 11.1.1.6,
My Scenario is I have number of Panel Boxes Surrounded by the Panel Dashboard.The Panel Dashboard surround by one PanelGroupLayout .
Now browser showing two Vertical scroll bars .one from PanelGroupLayout second from inside the panel dashboard.
How to avoid the scroll bar inside the Panel Dashboard ? My Codes like below...
<af:panelGroupLayout id="pgl2" layout="scroll" styleClass="AFStretchWidth">
<af:panelDashboard id="pd1" rowHeight="100%" columns="2"   styleClass="AFStretchWidth" >
             <af:panelBox id="pb1">
              </af:panelBox>
             <af:panelBox id="pb2">
            </af:panelBox>
             <af:panelBox id="pb3">
              </af:panelBox>
           <af:panelBox id="pb4">
           </af:panelBox>
</af:panelDashboard>
</af:panelGroupLayout>Thanks...
Edited by: David.. on Jun 6, 2013 8:44 AM

Hi,
is the panelDashBoard the only component in the panelGroupLayout? If so set it to vertical or default instead of scroll.
Frank

Scroll Bars Missing In New Item Dialog Box When Accessing Other Site Collection

I have run into a problem I am hoping someone can quickly inform me of what I am doing wrong. I am creating 2 hyperlinks on a page that will create new items in one of 2 separate lists (1 on each site collection). I tried using the same code in my CEWP for
each and encountered a funky issue, whenever I access a different site collection with the below code the dialog box says DIALOG for the title and there are no vertical scroll bars. Does anyone know how to tweak the below code (or improve it) to bring back
the scroll bars for the dialog box?
<div class="ms-rteThemeFontFace-1" style="text-align: center; text-decoration: underline"><a class="ms-rteFontSize-3" onclick="javascript:NewItem2(event,"Site URL IS Here/_layouts/listform.aspx?PageType=8&ListId={22980de9-0d12-4def-9df7-95de34b1ebe5}&RootFolder=");javascript:return false;" href="/_layouts/listform.aspx?PageType=8&ListId={22980de9-0d12-4def-9df7-95de34b1ebe5}&RootFolder=" target="_self"><strong>Add New Project Item</strong></a></div>
I am eternally grateful to anyone that can tell me what I am doing wrong.
Thank you

Hi,
Thanks for posting your issue, Kindly refer below mentioned URLs to fix your issue
http://sharepointblogbyshri.blogspot.in/2013/10/sharepoint-2010-modal-dialog-scrollbar.html
http://blogbaris.blogspot.in/2011/02/no-scrollbar-in-sharepoint-dialog.html
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/37385ef6-5773-47b8-a86a-c5317f6983e5/sharepoint-2010-survey-form-new-item-not-showing-scroll-bar-in-yaxis?forum=sharepointcustomizationprevious
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Removing scroll bar from product pages

I need to remove the scroll bar that appears on the product pages. It doesn't matter if I have only one product or 100 on the page with the small images, I still get a scroll bar on the right side. I've tried adding and removing margins and padding, set the container height to auto, and removed the previous and next buttons from the shop templates, all to no avail. It appears to be caused by the table that holds the products, but no change to the code fixes it.
I have included a screen print of the top of the page showing the scroll bar. There are only 3 images on this page and plenty of room below them. Overflow has been set to auto (and/or visible) on the container, the table, and the page.
So, can anyone tell me how to shut off that scroll bar? I can't find that code that includes it so I can't see what's going on.
Thank you for you help.
Sincerely,
Ahurani

Liam,
Thank you for answering.
I didn't want to turn the scroll bar on the page off, but the scroll bar that appears in a div container. I finally solved the problem by turning overflow: auto to overflow: hidden. And smacked myself in the forehead and said, "Duh. I knew that." Too tired and too close to the problem I guess.
The only other thing I can't seem to find is the large space that appears above a product table. I've tried everything from margins to padding and beyond.
Sorry about not including the url. I have used the forum so rarely that I didn't think of that. It is www.whimsicalley02.businesscatalyst.com, just in cases you want to look at the big space on Harry Potter > Accessories and on the large product page. I'd love to tuck the product closer to the breadcrumb, but if that is not possible, then c'est la vie.
Thank you.

Want to remove scroll bar from navigation pane in Web Template

HI All,
I have a report created in WAD.When I am using navigation pane, I get a scroll bar there.
I want to remove that scroll bar from navigation pane.Tried increasing the height in the property of same but nothing is helping.
The expanded option should be ON and do not want to group characteristics shown in nav. pane.
Please suggest, if there is any other way to do that.
Thanks,
Anu

Why do you want to expand it? Generally when you click on Nav pane, it should show the assigned chars under it. No scroll bar comes up with below settings:-

Remove vertical scroll bar from table control

hi,
i had used table control in my application. i want remove vertical scroll bar from table control.
At initial time in table control there is no vertical scroll bar. In my table control lines are dependent on internal table which i was used to fill it.
i was used these code for to set table control lines.
DESCRIBE TABLE IT_RISK_ZINRISEXC LINES EXC_LINE.
TC_RISK_EX-LINES = EXC_LINE .
Initially there is no data in internal table so there is no vertical scroll bar. After getting value i am filling internal table. and there is scroll bar in my table control. but i does not want that.
i was not selected RESIZING-VERTICAL OR -HORIZONTAL.

Hi,
From Scroll Bars in Table Control
You can remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
or
You can get rid of the vertical scroll bars by not setting table control lines. This way the user can only see the visible lines of the table control. As for the horizontal scrollbar, just make sure that your table control doesn't contain too many fields.
Regards,
Raj.

Scroll Bar removal from Jive Forums

Similar Messages

Maybe you are looking for