Scroll-bar STILL not working right in 10.6.1 update

The scroll-bar is STILL NOT working right in the 10.6.1 update. I am not able to click anywhere on the scroll-bar and have the navigation go there. I have to drag the blamed thing where ever I want it to go. This problem only exist with the recent iTunes 10.6.x updates.

I have the new MacBook Pro 2010, Dell 3007WFP. No mirroring problemsat that or higher res. I was chagrined, however, to find out that while my 2007 15" MacBook Pro had no problems driving the Dell 30", the 2010 17" requires the Dual Link cable for $100 extra. ;>(
But it works fine.
ak

Similar Messages

Trackpad Still not working right after replacement

I've recently been having issues with my trackpad on my Macbook Pro, i took it to the apple store last week and they replaced it due to it not registering physical clicks what so ever. However, although a new trackpad was issued/replaced and the problem is slightly better, the trackpad is still not working/registering physical clicks in several areas, anyone got any tips? I also can't really afford to go back to the store again at the moment, however i do have Apple Care which may open more windows for me?
Thanks

Welcome to Apple Discussions!
You might try a SMC reset:
http://support.apple.com/kb/HT1411?viewlocale=en_US
If no joy, call Apple on the phone and tell them the situation. They will try to troubleshoot it over the phone and should be able to advise you as to what to do.
Good luck!

My scroll bar is not working properly. It works if I click the outline only. How do I fix this?

I have tried reinstalling the lastest version but it did not fix the problem. I am running windows 7 on a hp envy. My scroll bar was working fine before the firefox version 4 update. Also the up and down arrows do not work unless I click on the outline of the boxes either. Any help in resolving this issue would be greatly appreciated as this is vary annoying.

Does your MacBook have a removable battery?
If so, try removing the battery and running just on the power adapter. Don't do anything too important as the computer will power off if the power adapter comes loose! Just do this for a few minutes to see if your trackpad works any better.
If your battery isn't removable, run your hand over the bottom of the computer - or run a level over it if you have one - to see if it's flat.
In either case, it's possible your battery has swollen and is applying pressure on the connection for the trackpad, which in turn means the trackpad won't work as expected.
~Lyssa

Scroll bar does not work when creating a datalist

So I created a very simple vertical scrollbar from 2 stretched rectangles (a thumb and a track). I also grouped a text field and a square together, that would make up the list items.
Next, I selected the scrollbar and the list item, and created a data list from them. When I tested the project, however, I could move the scrollbar without any problems, but the items in the list did not move. I also tried adding some more items to the list, which didn't help either.
Then i tried using the component from Flash Catalyst, instead of my "home-made" scrollbar. Making a data list out of this, and testing the project gave the desired result.
I'd really like to use my own made scrollbar here, and I have the feeling that I missed something completely obvious on the way that I forgot.
Note: I checked several times if I had forgotton to "edit the parts" of the scrollbar and data list, but I had selected all the parts as required.

What you can try if the above doesn't work, is deleting the scroll bar from your Data List, and then dropping it back in from the Library. The act of re-adding the scrollbar may get you the desired behavior.
If that doesn't work, you will probably need to post your project so we can take a look.
-Bear

BP Transaction Horizontal scroll bar is not working

Hi,
Horizontal Scroll Bar Not working for Marketing Attribute after Upgradation from Crm 6.0 to EHP 7.02
Scroll bar need to be Enabled or active Please suggest any OSS Note or any Idea in doing this .Please help me out
Thanks & Regards
Srinivas

Hello,
Not sure to understand the issue here. If you are using CRM7 EHP2, you should user WebUI/IC to manage BP. SAP GUI is no longer supported.
Best regards,
Sylvain AGUETTAZ

UPK - Click Scroll bar action not working in Player only

In the Developer all action areas are working as they should but when I published to the web one action is not working - the Click Scroll bar action in the TryIt mode. When you reach this step and click the scroll bar nothing happens so you are forced to either go forward or back. Any ideas why this is happening? Thank you.

Hello,
This does not sound familiar to me, but it sounds like it should be easy to troubleshoot. I would suggest entering a ticket in My Oracle Support (support.oracle.com). Sorry I couldn't be more helpful.
Best regards,
Marc

Scroll bar is not working since last updates

my scroll bar on laptop mouse pad no longer works in browser since last update. It works fine in all other programs.

See [[Missing vertical scroll bar]]

Scroll Bar Does not work

Hi I've took the example from http://corlan.org/2009/02/12/how-to-add-a-scrollbar-to-text-layout-framework/ to add a scroll bar to my editor
I use TextLayout Framework 2 and SDK Version 3.5 so I had to adapt my code to work and I got stuck on
private function composeListener(event:CompositionCompletionEvent):void {
           var textHeight:int = Math.ceil(_controller.calculateHeight());
             if (textHeight < _controller.compositionHeight) {
                 scroll.enabled = false;
             } else {
                 scroll.enabled = true;
                 scroll.minScrollPosition = 0;
                 scroll.maxScrollPosition = textHeight - _controller.compositionHeight;
             _controller.verticalScrollPosition = 0;
TLF 2 & SDK 3.5 Forces me to use a ContainerController that doesn't have a calculateHeight method.
How can I adapt this code to work with my current code? Is there an updated example of this?
Also here is my set textFlow method that might be helpful.
public function set textFlow(newFlow:TextFlow):void
                    // clear any old flow if present
                    if (_textFlow)
                         _textFlow.flowComposer = null;
                         _textFlow = null;
                    _textFlow = newFlow;
                    if (_textFlow)
                                        //textArea - Canvans
                         _controller = new ContainerController(_container,textArea.width,textArea.height);
                         _controller.verticalScrollPolicy = ScrollPolicy.ON;
                         _textFlow.flowComposer.addController(_controller);
                         // setup event listeners for selection changed and ILG loaded
                         _textFlow.addEventListener(SelectionEvent.SELECTION_CHANGE,selectionChangeListener,false,0,true);
                         _textFlow.addEventListener(StatusChangeEvent.INLINE_GRAPHIC_STATUS_CHANGE,graphicStatusChangeEvent,false,0,true);
                         _textFlow.addEventListener(FlowOperationEvent.FLOW_OPERATION_BEGIN,operationBeginHandler);
                         _textFlow.addEventListener(CompositionCompleteEvent.COMPOSITION_COMPLETE, composeListener);
                         _textFlow.addEventListener('scroll', scrollTextFlow);
                         // make _textFlow editable with undo
                         _textFlow.interactionManager = new EditManager(new UndoManager());
                         // initialize with a selection before the first character
                         _textFlow.interactionManager.selectRange(0,0);
                         // compose the new textFlow and give it focus
                         _textFlow.flowComposer.updateAllControllers();
                         _textFlow.interactionManager.setFocus();
Thank you

I've just found this:
http://www.ungramdeimagine.ro/tlf_on_Gumbo_example/TLF_on_Gumbo.html
The line that I was looking for was
var textHeight : int = _controller.getContentBounds().height;
Hope It helps someone

ABAP Webdynpro table scroll bar does not work

Hello,
I have created a dynamic WD table using cl_wd_dynamic_tool=>create_table_from_node. I have set the no. of visible rows to 5. Now when ever the table has more rows, it displays a vertical scroll bar. But if I scroll it down, after 5 rows, it dosent scroll further. Am I missing something here?
Thanks and Regards,
Sandhya

Hi,
I guess you might have wriiten the code in the MODFIYVIEW right.
One thing you do....
Use the FIRST TIME parameter , create the tbale and all. When the application runs for 2nd time, then reset the vsible row count value.
Have you used any BIND_TABLE statement in this modfivyew.
Please clarify above.
Regards,
Lekha.

Horizontal Scroll bar Is not working iN REUSE_ALV_BLOCK_LIST

Hi Experts,
I am trying to create a reprot by using REUSE_ALV_BLOCK_LIST_APPEND, REUSE_ALV_BLOCK_LIST_DISPLAY. I have 20 fields to display there, but here last two fields are coming in next row. But I need it it in one line with scroll bar. Cna anybody help me for that.
Either I should use any other FM to display blocks ( 2 tables) or there is any OOps based FM for this with USER_COMMAND.
Your help will be beneficial for me.
Thanks a lot in advance.
Edited by: Moni Bindal on Feb 10, 2009 7:32 AM

Hello Moni,
For increasing the length of columns
try the below code while building the fieldcat,
F_FIELDCAT-COL_POS = 1.
F_FIELDCAT-FIELDNAME = 'EBELN'.
F_FIELDCAT-TABNAME = 'IT_EKKO'.
F_FIELDCAT-REF_FIELDNAME = 'EBELN'.
F_FIELDCAT-REF_TABNAME = 'EKKO'.
F_FIELDCAT-KEY = ''.
F_FIELDCAT-EMPHASIZE = 'C510'.
F_FIELDCAT-LOWERCASE = 'X'.
F_FIELDCAT-SELTEXT_M = 'PURCHAGE DOCUMENT NUMBER'.
FIELDCAT-OUTPUTLEN = 20.
F_FIELDCAT-HOTSPOT = 'X'.
F_FIELDCAT-DO_SUM = 'X'.
APPEND I_FIELDCAT TO I_FIELDCAT.
Important
FIELDCAT-OUTPUTLEN = 20.
if you are generating the field catalog using FM "REUSE_ALV_FIELDCATALOG_MERGE" then,
read the field catalog table using the field names and modify the fieldlength
read table F_FIELDCAT with key FIELDNAME = 'MAKTX'.
F_FIELDCAT-OUTPUTLEN = 40.
modify F_FIELDCAT index sy-tabix.
OR
as I suggested earlier, you can shift the block with highest width to top, so all other blocks will also be displayed properly without wrapping to next line.

Bluetooth still not working in Mercedes with 2.1 update

I downloaded the 2.1 update. Unfortunately bluetooth still does not work in my 2008 Mercedes E320. I had no problem with the old iphone software. Any suggestion out there.

Yes, I was hopeful too, but alas bluetooth HFP adapter (late 2006 CLK) won't download contacts into the COMAND system. You can still make and take calls though (but you don't know who's calling, as there's just a number on the COMAND screen).
For all those at Apple that keep insisting this is a Mercedes hardware issue, let me say this slowly... Software 1.1.4 + iPhone + Merc HFP adapter: worked fine. Software 2.0.0 onward + same iPhone + same Merc HFP adapter: no contacts in COMAND. COME ON! GET IT SORTED! (or maybe Apple are in bed with Merc, BMW etc who interestingly have recently released dedicated iPhone adapters?!?!).
I suggest if you've got an EDGE iPhone: 1) Heep hold of it, 2) DON'T upgrade it from 1.1.4, or 3) HACK it back to 1.1.4!

Three years later and still not working right

Moved to my new address about 4 1/2 years ago, and for 18 months never any problems, 100% working, 1MB reliable. Then something changed !!! Got a new Homehub (with blue lights on), and since then DISASTER. The line drops (log states "unreachable") and some days if the winds in the right direction I can get 2MBs, otherwise its down to 64kbs (I kid you not). As I work from home (computer/server support) I pay the higher rate for my BB (unlimited) and the service offered is **bleep**. Over the last 3 years I have had 4 engineer visits, who have changed the faceplate each time for the latest version, and have confirmed its NOT MY FAULT, its the exchange or its the ext wiring to the excahnge. Once they even traced it back a few miles and told me they dug the road up to change a connector (funny I drive down that road all the time and never saw them digging up the road the day they claim to have). My latest saga ? I'm lucky if I get 90 secs without being kicked off (I had to cut and paste this). The hub logs state some of the following
11:42:03 9 Jan [CWMP] Connecting to server retry 6.
11:39:23 9 Jan [CWMP] Failed to resolve.
11:39:11 9 Jan IDS fragment parser : fragment out-of-order (1 of 1) : 87.70.132.30 86.129.205.98 1388 UDP 40447->49692 frag 29516:1368@0+
01:01:28 1 Jan usbmgr: USB device isn't matched the configuration
01:01:28 1 Jan usbmgr: try /etc/usbmgr/class/module
01:01:28 1 Jan usbmgr: try /etc/usbmgr/class/09/module
01:01:28 1 Jan usbmgr: try /etc/usbmgr/class/09/00/module 01:01:28 1 Jan usbmgr: try /etc/usbmgr/class/09/00/00/module 01:01:28 1 Jan usbmgr: class:0x9 subclass:0x0 protocol:0x0
01:01:28 1 Jan usbmgr: buffer line: remove T
07:50:15 10 Jan UPnP action 'AddPortMapping' from ip=192.168.1.65 (Success)
07:49:43 10 Jan UPnP action 'AddPortMapping' from ip=192.168.1.66 (Success)
07:49:06 10 Jan UPnP action 'AddPortMapping' from ip=192.168.1.65 (Success)
11:36:09 10 Jan IDS fragment parser : fragment out-of-order (1 of 2) : 95.24.204.200 81.154.149.164 1396 UDP 25116->10656 frag 32314:1376@0+
11:36:03 10 Jan IDS fragment parser : fragment overlap (1 of 1) : 95.24.204.200 81.154.149.164 1396 UDP 25116->10656 frag 26819:1376@0+
11:34:34 10 Jan IDS fragment parser : fragment out-of-order (1 of 266) : 93.80.213.196 81.154.149.164 1396 UDP 50637->10656 frag 26473:1376@0+
11:34:05 10 Jan IDS fragment parser : fragment sweep (1 of 1) : 93.80.213.196 81.154.149.164 1396 UDP 50637->10656 frag 20527:1376@0+
8:49:36 10 Jan [CWMP] Failed to resolve. 08:49:36 10 Jan [CWMP] Connecting to server retry 9.
14:36:21 11 Jan UPnP action 'AddPortMapping' from ip=192.168.1.65 (Success)
14:36:13 11 Jan UPnP action 'AddPortMapping' from ip=192.168.1.66 (Success) 14:36:04 11 Jan UPnP action 'AddPortMapping' from ip=192.168.1.66 (Success)
14:36:03 11 Jan UPnP action 'AddPortMapping' from ip=192.168.1.65
And it goes on and on like this, as a result it kicks off any wireless connected devices (printer etc), which will no longer connector till they are rebooted. If the homehub is powered down, and back up then the internet works fine for a few minutes, then crash down it goes again. Got engineer number 5 coming thursday, but I think the same will happen again, new faceplate, and told its the exchange or the wires to the exchange! Anyone got any clues or suggestions I can use to get this resolved ? By the way neighbor is with Pipex and never has any problems, yet they did when with BT ? strange I thought they used the BT lines ?

Locked up again!!
Connection information
Line state
Connected
Connection time
0 days, 0:00:49
Downstream
1,888 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
10.0 dB / 16.0 dB
Line attenuation (Down/Up)
60.0 dB / 31.5 dB
Output power (Down/Up)
16.7 dBm / 12.1 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
0

Audio in menübar is not working right!

Hi i got a little problem here when i switch on my mac the Audio sign in the menü bar is like this (in the picture) this is not everytime i swich it on but sometimes. I had also some other problems with os x lion so i completly deleted the hard drive and made a completly new instalition then after that the little mistakes were gone but the problem with the audio thing is still there what can i do???

make sure all your third party downloads are updated. Sometimes turning all of them off and then turning them on one by one helps. if you think it's your Stat Nano software, see if they made an update to Lion. If you haven't updated any of your software after installing lion then it would most certainly help to check to see if any of them have an update to run on the new OS.
if you do figure out what it is, please do share as others might have your issue. you should also send this to apple for further analysis. http://www.apple.com/feedback/macosx.html

Video playback still not working right, for any website videos.....

I have downloaded SilverLight, I have updated Windows, I have unchecked the Acceleration option from Flash Player, yet all videos from any website are still playing slowly. Audio is fine, but not the video. At my wits end, as this was one of the key reasons I downloaded FF in the first place. Please help. I have read and done most if not all of the suggestions so far, so now posting this. Thank you. Craig.

'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart.

FireFox web buttons and movie scroll bar do not work anymore!

== Issue
==
Firefox is having problems with certain web sites
== Description
==
When watching movies after choosing Maximize movie to full screen movie controls no longer work. You must first hit ESC to get out of full screen mode before controls work again. I have seen this on 3 different sites. This is a new problem. And the problem seemed to start after FireFox prompted me to download a new version of Flash.
<blockquote>Please don't post clickable links to XXX-rated material in this forum.
Space now inserted in that link - edited by a moderator - eh</blockquote>
== URL of affected sites
==
<blockquote>Do not post links at all to porn -MJB</blockquote>
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.6
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Java Console
6.0.16
true
Java Console
6.0.17
true
Java Console
6.0.18
true
Java Console
6.0.19
true
Java Console
6.0.20
true
Firefox Showcase
0.9.5.5
true
{89506680-e3f4-484c-a2c0-ed711d481eda}
DVDVideoSoft Menu
1.0.1
true
DownloadHelper
4.7.3
true
Adblock Plus
1.2
true
Download Statusbar
0.9.6.8
true
SweetIM Toolbar for Firefox
1.0.0.10
true
Norton IPS
2.0
true
Norton Toolbar
4.6
true
{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}
Search Helper Extension
1.0
true
{27182e60-b5f3-411c-b545-b44205977502}
Adobe DLM (powered by getPlus(R))
1.6.2.63
true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.igoogle.com
browser.startup.homepage_override.mstone
rv:1.9.2.6
extensions.lastAppVersion
3.6.6
keyword.URL
http://search.sweetim.com/search.asp?src=2&q=
network.cookie.prefsMigrated
true
places.last_vacuum
1273928725
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SIMBAR={9CDB2A64-E417-42DF-83F2-1B302E1DA08A}; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET CLR 1.1.4322; .NET4.0C; .NET4.0E; InfoPath.3; Creative AutoUpdate v1.40.01)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Scroll-bar STILL not working right in 10.6.1 update

Similar Messages

Maybe you are looking for