Scroll Effect issue

Hello.
scenario
I am setting up an object that when you click it you are returned to the top of the page.
I chose to use Scroll Effects for this.
Issue
I am using an 1920x1080 monitor and so the scroll effect is set to that standard.
When i test the site on an smaller monitor the object is out of place or even out of screen.
Is there a way to make the object static or lock it to a point on the screen so it still follows when scrolling on any size monitor?
have
Thank you!

You could pin the object in place, so when you scroll down the page it stays in the same position (instead of Scroll effects)
Having the object set to the left side of your screen should guarantee it being visible on any size monitor.

Similar Messages

  • Hi, i am having an issue with a basic motion scroll effect.  I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

    Hi, i am having an issue with a basic motion scroll effect.
    I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
    please note, that i am new to muse, this is my first project ever.
    my idea is as following:
    when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
    so…..
    now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
    now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
    now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
    when i am scrolling down the WHOLE logo goes down…. so far so good.
    NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
    so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
    the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
    NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
    SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
    BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
    short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
    but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
    Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
    Thanks so much to everyone who actually reads this post and tries to help…….
    All the best,
    Niki Lapan

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

  • OAM File and Scroll effects Not AutoPlaying in Muse

    Hello
    I placed an OAM file in muse which contained a slideshow ( slideshow is a basic slideshow provided by muse ) and i noticed that it doesn't work when i activate the edge animate scroll effects. The autoplay function does not work, nor does the "advance 1 second every pixel" function. This is a big one, i really need this effect to work. Otherwise edge animate is pretty useless without it. Somebody please help. Thanks

    Hi David,
    I see the issue you're having on your website. I'm having trouble reproducing it myself. Can you please send your file so I can take a closer look at what is happening? You can send it to [email protected] with the subject attn:Dana and include a link to this thread.
    Thanks,
    Dana

  • My webpage with parallax scroll effects flickers in internet explorer 11. How can I fix this?

    My webpage with parallax scroll effects flickers in internet explorer 11, when using the mouse wheel or the arrows in the scroll bar - Parcerias | Agrupamentos de Escolas | EEA | DGE
    It works fine in firefox, chrome and safari.
    How can I fix this?
    Thank you

    Hi FilipaG,
    Unfortunately there isn't much you can do. This is a performance issue with IE 11, so the only current way to make the site less jittery is to have fewer effects or group objects with the same effect then apply the motion to the group. Sorry for the inconvenience. You can also post in our feature requests section how you'd like to see easing added to Muse, because that would move all of the objects together much more smoothly than they do currently. Chrome and Firefox in particular have great built in easing so these sites usually look better on them.
    Thanks,
    Dana

  • Scrolling effect - "cut pictures"

    Hi,
    I'm trying to make scrolling effect with pictures, I obtain the right effect but scrolling "one piece" of picture appears over or under of the picture.
    Here's the ex.:
    What is my mistake?
    Some help?
    Thank you so much to everyone.
    Daniel

    So with tile fitting and stroke value 0 , applying scroll with 0 filed value the images are not scrolling properly ?
    The image overlap is probably due to the page size you have defined, please make sure you maintain the page size accordingly.
    If still same issue, please send me the muse file at [email protected] with my name and this forum link in subject line.
    Thanks,
    Sanjit

  • Muse shifting scroll effect objects 20 px right when using anchors

    I am using anchor navigation in a single page website.  My objects with scroll effects applied to them are aligned correctly within muse but shift 20 pixels right when i view the site in the browser.  any one else having this issue and how do you fix it.
    site rabobio.businesscatalyst.com

    To somewhat deal with this problem i have taken the object with scroll effects on it and moved it 20 px left in muse to center it in browser.  i don't know why the shift is only occurring to abjects with scroll effects on them on pages where i use anchor navigation

  • Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

    Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

    This article is for startup but it might help.  http://support.apple.com/kb/ts2570

  • Scroll Effects to OAM file

    Hello everyone!
    I am trying to add Scroll Effects to OAM file (in Muse project).
    I did this:
    Export the OAM file from Adobe Animate.
    Launch Muse and double-click a page to open it in Design view. Ensure that the page is long enough to scroll by updating the minimum height settings in the Page Properties dialog box.
    Choose File > Place and browse to select the OAM file from the site folder.
    Open the Scroll Effects panel. Click the Adobe Edge Animate tab (fourth tab from the left) to review the settings for this section.
    While the OAM file is selected, enable the Edge Animate checkbox.
    Choose Autoplay 700px
    Preview page in browser and my OAM animation starts playing immediately. What is wrong? I want animation to star playing after user scroll down (700px for example), but now as soon as I load the page my animation starts playing!
    My Adobe Animate file has simple structure. Autoplay set to "yes". I have a stage and one element with animation (movement from one point to another in 2 seconds).

    I just updated to the latest version of Muse, Edge Animate, and everything else from Creative Cloud, on my alternate computer. I re-published the animations from Edge Animate and the site from Muse and it still doesn't work.
    @Devendar_kumar
    I made a test page and animation like what I am trying to do. You can view it here: http://testanim904.businesscatalyst.com/
    It's the same animation in both grey rectangles. The one on the left is published from Edge Animate with autoplay not checked, and the one on the right is with autoplay checked. They are then placed into Muse, with a scroll effect (edge animate tab) to start playing the animation at 430px. The blue bar is there to show 430px and when the animation should start playing. (I tried the 'advance 1 frame every x pixels' setting as well but it had the same results.)
    Yet, the result is that the left one does not play at all and the right one plays even before the browser scrolls to the blue bar. Thus, edge animate scroll effects in Muse appear to no longer be working.
    I have placed this test file and both oam files on my dropbox at:
    https://dl.dropboxusercontent.com/u/21180533/testanimation.muse
    https://dl.dropboxusercontent.com/u/21180533/testanim.oam
    https://dl.dropboxusercontent.com/u/21180533/testanim-ap.oam

  • Page shift due to vertical scroll bar issue

    I'm working through a vertical scroll bar issue in my design, using a ProjectSeven CSS page template. When testing the site in my browsers (FF/Safari/IE/Opera), and IF the scroll bar is not present, the entire page shifts to the left (the width of the scroll bar) when I click a link in the left column of my design. The page does not shift when the vertical scroll bar is present. Support at P7 suggested the following fix:
    html, body {
    height: 100.1%;
    margin: 0 0 1px;
    I've tried placing this markup in about ten different places but can't seem to find the right location in the code. Is it possible for someone in the forum to take a look at my page source and show me where/how to locate this fix?
    See my test site at:
    http://www.murcal.com/test_curvi_2.html
    Thanks .  .  .  .

    PZ,
    I'd like to place the fix where you've suggested, but that's the whole issue.
    I simply don't know where my CSS ends (duh). Is it possible that you show me exactly where?
    Hopefully this is the right section of my code:
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>PVII Curvitude</title>
    <link href="p7curvitude/p7CRVboxes982_2col.css" rel="stylesheet" type="text/css" />
    <link href="p7curvitude/p7CRV08.css" rel="stylesheet" type="text/css" />
    <!--[if lte IE 6]>
    <style>
    #navbar a {height: 1%; float: left;}
    </style>
    <![endif]-->
    <script type="text/javascript" src="p7pmm/p7PMMscripts.js"></script>
    <link href="p7apm/p7APM10.css" rel="stylesheet" type="text/css" media="all" />
    <script type="text/javascript" src="p7apm/p7APMscripts.js"></script>
    <link href="p7pmm/p7PMMh04.css" rel="stylesheet" type="text/css" media="all" />
    <link href="p7pmm/p7PMMh07.css" rel="stylesheet" type="text/css" media="all" />
    </head>
    <body>
    I've tried placing it in about ten different places, but I'm wrong everytime.
    Obviously, I'm a beginner trying to learn. I just can't seem to place it correctly.

  • Text and some images together in a scrolling effect

    Hi.
    All the tutorials I find about scrolling effects are just with simple text. And all the tutorials about images don't say anything about applying it together with text.
    I have a rather simple scrolling credits at the end of my video and wanted to have three or four logos at the end. (I'd do anything for the sponsors hehe).
    The only way I could find to do this is to have two different scrolling effects to each individual image and another one for the text and move them back and forth until they fit. Even harder is to make them scroll at the same speed. Right now I've got one logo at the right speed, making them all do that will take hours.
    Does anyone know an easier way? How can I add the images into the text?

    Do you have Photoshop?
    Start with one of the video presets in PS that has the same pixel dimesions as your video footage.
    Make sure it is transparent.
    Add a New Layer and color it black with Shift F5 - this is only temporary to help you see the text while you compose it.
    Add a new text layer. Type your titles. When you need more space extend the lower part of the PS canvas: Image > Canvas Size. Repeat this as often as you need.
    Paste your logos.
    When you are done, go to the black layer and delete it.
    Go to Layers > Merge Visible.
    Save as a TIFF with the Preserve Transparency option checked on.
    Import into FCP (or FCE), make it as long as you need and superimpose on your background.
    Double click to place in the Viewer and set the scale to 100%.
    Use the position contols to move your titles up the screen. Render.

  • [ADF-11.1.2] Scroll bar Issues - Please file BUGs for these issues.

    Hello,
    Recently, I have started working on ADF and till now I found 2 scroll bar issues with Oracle ADF.
    1. af|inputComboboxListOfValues : Scroll bar appears on Google Chrome.
    Screenshot: http://imageshack.us/photo/my-images/829/inputcomboboxlistofvalu.jpg/
    2. Setting Table "columnStretching" brings dummy scroll bar : [ADF-11.1.2] Setting Table "columnStretching" brings dummy scroll bar
    I beleive that these two are scroll bar related Bugs but what I understand from ?messageID=9773962 that since I don't have support contract, I can't file a bug.
    I have created this thread so that responsible people can take actions accordingly.

    Shay,
    Thank you for your reply. I will take a look at your links.
    Use Case:
    Application will have different BC for different IT Assets (like Monitor, Keyboard, Servers etc), which will basically hold records for all available Assets (like Display Resolution, screen size etc for all monitor in Monitor BC).
    I want to give user; the ability to create, for e.g., the sub-class of Monitor to store more specific attribute-values in different table (which will be linked Parent BC). For e.g.: They may want to care about holding CRT and LCD Monitor records in separate new database table -- Application will ask user what all attributes/Columns they want to see for LCD which is specific to this type AND which is not present in already existing out-of-box Monitor BC/Table - e.g. - "Viewing Angle" Attribute).
    With that said, I can write code to create database table on fly (having 1-to-1 foreign key reference to parent table) but writing ADF part seems difficult. I also wanted application to automatically generate new page for newly added VO BC. E.g.: LCD-Monitor.JSPX inheriting all attributes from monitor (parent VO) in the same structure as Monitor.JSPX file is having with extra LCD-specific Attributes in separate panel tab (which again UI developers can customized it).
    Too much to expect huh !
    I am going to start building the application so If not above way, any other suggestion to achieve the requirement ?
    Edited by: Anandsagar Sah on Aug 29, 2011 9:23 PM

  • Parallax scrolling effect

    Does anybody know how I can achieve the effect below with parallax scrolling in Adobe Muse? In the example below there is one illustrated image and another photograph, and when scrolling it looks like the illustration is being colored.

    Please check out the Browser Fill section of the Scroll Effects article from below link.
    Scroll Effects using Browser Fill
    Here is what I managed in Muse playing around with the same: http://colorfill.businesscatalyst.com/index.html
    You can download the source file for the same from: http://colorfill.businesscatalyst.com/assets/colorfill.muse
    Hope that helps.
    Cheers,
    Vikas

  • How to slow Motion Scroll Effects and anchors?

    I am using a down pointing arrow to cue the user to scroll down to the next section. I thought I could automate by linking the arrow to an anchor that is positioned down the page. Cool, it works. However, the jump is so fast that all the fancy Motion Scroll Effects I'm using on the next section are nearly invisible. I see that this site does what I want when you press the "Scroll Down" graphic: Digital Marketing Agency in Johannesburg, South Africa
    Is it possible to slow down the browser scroll when jumping to an anchor, using only Muse?
    Thanks,
    JohnS

    There's no way of controlling the speed of the scroll, other than the distance between your trigger and the anchor points. Since it uses an ease in control, the closer the anchor is to the trigger, the slower the scroll will be and likewise, the further away the anchor, the quicker it scrolls.

  • How do I create a mobile version of a site that is based on scroll effects and a slideshow background?

    I need to create a mobile version for a site that is based on scroll effects and a slideshow background.
    Is it possible to copy the format from the desktop version without re-designing all the elements?

    Hi
    Different renditions will use require the page elements to be optimized accordingly.
    So you can surely copy the page elements and paste in phone or tablet layout , but you would need  to modify them.
    Thanks,
    Sanjit

  • Scrolling Effects in Adobe Muse

    Hey everyone,
    I am experimenting with the scrolling effects in Muse and I am using a pattern that tiles horizontally
    across the site. My pattern scrolls up and off the screen. My key position is 143. If I change this, it
    changes my original postion on the page. I like the scrolling up motion but want it to stop at a certain
    spot and remain fixed there while the rest of the animation goes through its motions.
    Any ideas?
    Thx,
    matt

    Aish,
    I think we are on to something here. I went back to changing the final motion to 0. Then, I changed the T-Bar ( the blue line that designates the starting from point)
    to extend into the graphic, instead of above it. In previous attempts I tried to extend the T-Bar below the graphic without success. Now, the graphic moves to the correct
    position but does not start in my desired position. In "design" mode the graphic appears to be in position but in "preview" mode it has shifted from my intended placement.
    What do you think?
    matt

Maybe you are looking for

  • Use of boolean variables in BPEL switch statements

    I have a workflow with a single boolean input parameter: <element name="input" type="boolean"/> I wish to use a switch statement within the workflow, based on the value of that boolean parameter. When I use the following XPath expression: bpws:getVar

  • How to re-download Apps when you have canceled and then restarted a membership

    Hi There, I recently (in the last two weeks) canceled a membrship, and then started a new membership. In that time my apps expired so I deleted them from my harddrive. Today, I wanted to reinstall apps, but when I did via the CC Downloader it had all

  • Imessage not working after update to iOS 7

    imessage is not being activated after the recent upgrade.  Anyone else is having issues?

  • Can I create a shape in Photoshop and use it as a mask?

    I've made a leaf in photoshop - white on black, but it's still in layers at this point. I'm trying to bring the leaf into motion, and use it as a mask so I can run video behind it. I've been able to mask around the video in my leaf shape, but all of

  • How do I color an entire layer?

    G'day. I'm new to scripting illustrator, and I'd like to be able to set the color of everything on a layer to red ( or any other color). Is it possible? I've tried selecting all with the GUI, and setting the default stroke color while the layer is se