Scroll feature direction on my MacBook is opposite on my Iphone.

When I use the two finger scroll feature on my macbook, it goes in the opposite direction of the scroll feature of my iPhone. Is there any way to adjust either one so that they both scroll in the same direction? Thanks for any help.

I'm not exactly clear on what you're asking. Are you saying that when you use the two finger scroll on your MacBook it scrolls in the opposite direction.. meaning when you move your fingers downwards it scrolls upwards and visa-versa?
You need to be a little more specific about what you're experiencing.

Similar Messages

I just installed the new mountain lion software on my iMac. I was currently running Snow Leopard. My problem is with my mouse. Now when I scroll down the page it moves in the opposite direction. I checked system S.P. - Natural for scroll feature.

I just installed the new mountain lion software on my iMac. I was currently running Snow Leopard. My problem is with my mouse. Now when I scroll down the page it moves in the opposite direction. In system preferences I tried checking and unchecking Natural for scroll feature. Movement from side to side works fine. Has anyone experienced this problem?

I think this new scrolling behaviour was introduced with Lion. You do get used to it pretty quickly (well I did). Are you sure that deselecting Natural Scrolling in Mouse Prefs doesn't re-instate the previous behaviour, it does here.

Does the new scrolling features on OS Lion work with the Macbook Black? I already am running OS Lion..

I already downloaded it and i can't seem to use the scrolling features except for the two finger scroll.

Which model do you have.
With MacBooks it's only the Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody that have the buttonless multi-touch glass trackpad.The Early and Mid 2009 model 5,2s had the 2 button trackpads
You need the MacBook with the trackpad that looks like this with no buttons

Scroll feature no longer works in Mail...suggestions?

the scroll feature that works everywhere else on my macbook pro (early 2008) does not work in Mail.

Ah....
http://feedback.photoshop.com/photoshop_family/topics/you_broke_4_4_part_of_it_anyway

How do I capture video directly to my MacBook?

I use Sony PD-150 and MacBook Pro with FCP5
I tried to capture video directly to my MacBook Hard Drive
without using a tape but it keeps waiting for timecode
to be set and going nowhere.
I am pretty sure that there is way to record
directly to hard drive without going through
recording to tape and from tape to hard drive
but can't find the solution.
Can you guys help me out on this issue?
thanks in advance!

I am pretty sure that there is way to record
directly to hard drive without going through
recording to tape and from tape to hard drive
but can't find the solution.<
Ian's answer is spot on.
We see this post about once a week so you can scroll down or search the forum and find all of the reasons recording directly to your drive is not recommended.
bogiesan

The scroll feature on my touch pad does not work with 4.0. Works in all other apps including 3.6. What hapened???

I can not scroll through web pages with the scroll feature on my touch pad. It worked in 3.6 and all other programs that I use. I have tried 4.0 twice with the same results, I've restarted, rebooted etc.
This should not be application dependant but a system function.
Now I will either roll back to 3.6 where I have troubles with some secure sites or just dump the whole thing and try Chrome.

I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them. Even the guest login's trackpad worked perfectly but not the main admin account.
First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
Solution:
I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions to access the old admin users Library But I chose to boot
from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder BY Host. It has special hidden files. Other way is to copy the Preferences folder we'll say into the Desktop.
I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
I'm leaving this solution because there's someone else in the MacWorld with the same issue.
Ted

My scroll feature of the Lenovo ThinkPad(red scroll) is not working in the new Firefox 4. It was working fine in 3.6. Can you please fix this as this is very important feature.

The scroll feature(middle button) is not working on the new firefox 4. So because of this I need to move the scroll bar to move the page. This is very irritating problem, if you are a guy who uses the middle button to scroll. Can you please fix this..
Thanks!!!

I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again.

Recording from a camcorder directly to a MacBook harddrive - Possible?

Hi,
I'm trying to find a way to record performances of a show I'm directing onto my MacBook harddrive directly. After looking at options, like recording to DVDs, etc., it seems that the only way I can record something that will be a little over an hour long without interruption is if I record directly onto my harddrive.
I've searched through the forums but all I can see is whether or not a camcorder is compatible with iMovie, which could mean you record with the camcorders standard media first, then download it onto iMovie, and that's not what I'm looking for.
Does anyone have recommendations or information on a camcorder with which I Can record directly onto my MacBook harddrive in a format I can digitally edit (e.g. add title cards, etc.) and that would be priced under $300 CDN? Unfortunately to rent something for 3 nights, it turns out I may as well buy it for that cost.
Thanks!

No. It needs to go through iTunes on a computer.
(107103)

How can I fax directly from my MacBook Pro?

I am interested in faxing documents directly from my MacBook Pro. How do I do that?

Are you looking to do a lot of Faxing- then sign up and pay your money.
If not so much you can send free fax with http://faxzero.com
You can recieve free fax with http://eFax.com
There is a 3 page limit/ fax
http://www.askdavetaylor.com/how_to_receive_free_faxes_online_web/

Hi, I am trying to connect a WD Mybook for Mac to my airport/time machine device. On the AirPort Utility it listed under Disks at 0 Mb. I enabled file sharing. But nothing happens. If I plug it directly into my MacBook it works fine. How do I fix it?

I am trying to connect a WD Mybook for Mac to my airport/time machine device. On the AirPort Utility it listed under Disks at 0 Mb. I enabled file sharing. And also followed all the steps - "secured disk access: with a disk passord", "Airport disk guest access: read and write", "Share disks over WAN". But nothing happens. If I plug it directly into my MacBook it works fine. How do I fix it? Also, its connected via a powered usb hub.

I assume that you are using Mac operating system 10.4.11, as your profile indicates.
The instructions that you referenced are for use with AirPort Utility....not AirPort Admin Utility.
Suggest that you download and install AirPort Utility 5.4.2 for Mac , which will run on 10.4.11.
Also noticed that the instructions do not tell you that the hard drive should be formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme, but they should.

I need to connect my Nikon D3x directly to my MacBook Pro. So that once I take a picture, that photo will show up instantly in Photoshop CS5 in my MacBook Pro. Is it possible?

I need to connect my Nikon D3x directly to my MacBook Pro. So that once I take a picture, that photo will show up instantly in Photoshop CS5 in my MacBook Pro. Is it possible?

You should ask in the Photoshop CS5 forum.

How do I download OS 10.6.7 to an external drive? For some reason it gives me an error when I try to download and install directly to my MacBook Pro.

How do I download OS 10.6.7 to an external drive? For some reason I get an error message when I try to download directly to my MacBook Pro from Software Update or from the Apple Downloads site.

brandonfromcharlton wrote:
I just had this issue as well. A work around is to manually install all of the updates, one-by-one. This may take a while and be a pain, but after this it's freesailing for future updates. Not sure what the issue is but don't worry, that will fix it.
BF
Instead of downloading one by one simply download the 10.6.7 'combo' update from Apples support site, it contains all previous updates in one package.

Mac OS X 10.7.5. No MagicPref, no USBDriver(?) No scrolling any direction. HELP PLEASE!

My Magic mouse won't scroll. I have Mac OS X 10.7.5 and have no MagicPref and no USBDriver(?) as I have seen other posts that say to check these. I have no scrolling any direction and I have been in 'Universal Acc' and 'Mouse' to make sure that all checkboxes are correct etc.
Im at the point where Im about to take it back to the shop in Australia to claim on warranty.
Can Anyone help me first :'(

DM;
I've got the same problem - Magic mouse, OS 10.7.5, and no scrolling.
Our tech support said it may be corrupted mouse driver preferences.
His 1st suggestion was to delete the mouse from bluetooth, and then re-connect it. That usually re (boot? reinstall?) the driver. Tried it, with no luck.
When he's back in the office, I'll ask him to follow up. When I find out the problem I'll post up here with solution.

Can I add a scrolling feature (for both x and y axis) in BG(Gantt chanrt)

Hi Experts,
I have developed a chart application in WD ABAP using Business Graphics. But the problem is that if there are more number of records, the size of the bars in the graph start shrinking , can I somehow introduce scrolling features so that at a time only 15 records are displayed on both the axis and the user can scroll in to see more records if he wants to .
Regards,
Abhishek

Hi Abhishek,
<li>Check this transaction code GRAL where you find many graph related programs are found .
Thanks
Venkat.O

How do I synch my podcasts directly from my MacBook with iPhone/iPad (without iCloud)?

Hi,
I am using an MacBook with iTunes 11.2.2. (3) and an iPhone/iPad with the most recent iOS 7.1.2.
What annoys me is the coud symbole on my iPhone/iPad when I want to listen to my Podcasts. Is there any way to have a direct synchronization of podcasts from my MacBook to my iPhone/iPad? In a nutshell: why do I have to download the same content twice?
Unfortunately, I am sometimes in remote areas without internet/mobile phone coverage. Thus, I would simply get all stuff from my MacBook on my iPhone/iPad without any (unnecessary) detour via the cloud just as in the back old days, when you had to use iTunes for any data transfer to you iPod.
Looking forward to your insights!
Best regards
Torsten

Hi Torsten_75,
Welcome to the Support Communities! If I'm understanding your question correctly, you want to be able to sync Podcasts directly from your Macbook with your iPhone/iPad. You can still do that via the iTunes software on your Mac and the Podcasts app for your device:
Podcasts app for iOS: Syncing podcasts
http://support.apple.com/kb/HT6202
Mac or PC
Open iTunes and then click the iTunes menu.
Choose Preferences and then click the Store tab.
Place a checkmark next to "Sync podcast subscriptions and settings."
Details on syncing
Enabling syncing for podcasts syncs subscriptions, stations, and play position. Here are the details on everything that syncs.Subscriptions
Subscribing
Syncing podcast subscriptions will download the newest episode for each podcast you are subscribed to (but not previous episodes for that podcast). If you choose to download other episodes for a subscription on one device, they won't automatically download to your other devices. See the transferring section below for more information.
Unsubscribing
If you unsubscribe from a podcast on one device, all of your other devices will unsubscribe to that podcast. If you re-enable a subscription to a podcast, all of your other devices will subscribe to that podcast again.
Deleting
When you delete a subscription on a device you'll also automatically be unsubscribed to it on all of your devices. If you delete a podcast on your iOS device, iTunes on your computer will show the message "This podcast has been deleted from another device, but has saved episodes."
If you click Resolve you'll see the message "Do you want to delete or restore syncing of the podcast?"
If you want to keep any episodes that you've saved on your computer, click Restore Sync on the the dialog box. The subscription will then be added back to your other devices.
If you click Delete, the podcast and all its episodes will be deleted. If you delete a podcast subscription on your computer, it will delete the subscription on your iOS devices including downloaded episodes (unless they're marked as Saved).
StationsWhen you create a station in iTunes on your computer, it will appear on your other devices. If you create a station in the Podcasts app for iOS it will appear on your other devices. Any station settings you change will also sync to all of your devices. If you delete a station on one of your devices, it’ll delete on every other one too.Playback positionPodcasts can remember your playback position between devices and computers so you can always start where you left off. As long as syncing for Podcasts remains on for your iOS device, playback position will sync. However, you'll need to enable this setting in iTunes on your Mac or PC since it's off by default.On your computer
From iTunes pull-down menu select Preferences
Click the Store tab
Enable "Sync playback information across devices." It may take a few minutes for syncing to finish.
Transferring episodes and playlists
Podcast episodes on one device don't automatically download on your other devices. If you want all your downloaded episodes to appear on your other devices, you'll need to sync your iOS devices to your computer over Wi-Fi or with a USB cable.
Connect your iOS device to your Mac or PC with iTunes.
Click the Podcasts tab.
Pick which downloaded podcasts should appear on your iOS devices as well.
To sync an iTunes playlist of podcasts to your iOS devices, place a checkmark next to them under "Include Episodes from Playlists." These playlists will appear in My Stations in the Podcasts app for iOS.
Click Sync.
Cheers,
- Judy

Scroll feature direction on my MacBook is opposite on my Iphone.

Similar Messages

Maybe you are looking for