Scroll is not working properly in safari 5.1 in window as well as Mac PC.

Anybody have solutions ??
I have a jsp page that renedering data dynamically using DWR (Ajax calling). but at the end scroll bar isn't loading all the data in whole page.so i can't see the data at bottom level but. when i click anywhere or just refresh some part of my page than Safari Browser's got the correct scrollbar with all the data loading. Again when i refresh and reload my page than it will give me same issue.... Scroll bar does't appear. Is anything performance or speed issue with DWR(Ajax DataLoading with scrollbar in safari 5.1 ?? Bcoz It's working fine with old SAFARI 5.0 version.

Hey, Anybody have solution or Fixed it by Safari Team support ???

Similar Messages

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Gif's not working Properly in Safari

this gif, www.harlemnocturne.ytmnd.com , (worksafe, just turn down speakers) will load for me, but the second half moves extremely slowly. i created that gif, and I know what it should be like, but in safari it doesnt work properly. It loaded and played fine in Internet explorer, but it won't in safari. Other gifs behave this way as well, and its very annoying. I can't remember if this started before the most recent safari patch or not.

http://discussions.apple.com/thread.jspa?messageID=1534861&#1534861
http://discussions.apple.com/search.jspa?threadID=&q=animated+gif&objID=f876&dat eRange=last90days&userID=&numResults=15
a common subject.
Your first post - welcome!. The search facility here works very well.

Pinch to zoom not working properly in Safari 5.1

I have OS X 10.6.8 (downloading lion as i type). I updated safari this morning and ever since I did that, pinch to zoom isnt working right. I can pinch to zoom in, to a certain extent but I can not get as large as I want as I used to and I cannot zoom back out at all. It seems to be working properly in my other apps so I guess it's something in safari. I'm not very Mac savvy since everything usually works and I dont have to be, so maybe I'm missing something? Help! I use this feature CONSTANTLY and desperately want it back. Thanks in advance!

Same here.
MBP Late 2007 with Magic Trackpad
OSX 10.6.8
Safari 5.1 (6534.50)
I could zoom in once and then it wouldn't work anymore by using the pinching on the Magic Trackpad.
Pressing Command and +/- still worked.
I deleted Safari 5.1 and reinstalled the Combo Update to get 5.0.5 back and it worked properly again.
Then I installed 5.1 another time and had the same error again.
I guess I got to roll back to 5.0.5

Scroll Bars Not Working Properly with Multiple Displays

Do the following on a laptop that supports having the desktop spread across multiple monitors. Display 1 is the laptop screen, Display 2 is an external monitor.
Open a SQL*Developer window in Display 2.
Open a SQL Worksheet.
Run a query that produces more rows than will fit in the results window, e.g. "select * from user_objects".
Click, hold, and slide the vertical scroll bar handle downward in the results tab.
The rows do not scroll. Garbled characters appear in the last row.
Move the window to Display 1. The scroll bar works properly. Rows scroll up and down and no garbled characters appear.
Note that the horizontal scroll bar produces garbled characters as well.
(SQL*Developer 1.2.1 32.13; Win XP Pro, Oracle XE)

These sort of issues can often be fixed by some combination of
- getting the latest device drive for your graphics card
- using java 6
- specifying -J-Dsun.java2d.ddoffscreen=false as a command line argument for sqldeveloper.
- specifying -J-Dsun.java2d.noddraw=true as a command line argument for sqldeveloper.
You can also add vm options to you sqldeveloper.conf file using the "AddVMOptions -D..." directive

Outlook web app not working properly in Safari since switching to Yosemite

I have installed/upgraded to Yosemite first on my MacBook Air (13-inch, 2011) and then on my IMac 13.2 (27inch, 2012). In both cases I have experienced the same thing: when trying to attach a file to the message written using the Outlook Web App, I get only upper part of this window and while I can browse for the file, I cannot attach it as I cannot reach and click the "attach file" button. Needless to say this is really annoying!
I did not have this problem before upgrading to Yosemite and Safari 8. The same function still works if I use Firefox or Opera.
Anyone had similar problems and any suggestions how to go around it without switching back to the old OS X?
Model Name: iMac
Model Identifier
Processor Speed: 3,2 G

Same here.
MBP Late 2007 with Magic Trackpad
OSX 10.6.8
Safari 5.1 (6534.50)
I could zoom in once and then it wouldn't work anymore by using the pinching on the Magic Trackpad.
Pressing Command and +/- still worked.
I deleted Safari 5.1 and reinstalled the Combo Update to get 5.0.5 back and it worked properly again.
Then I installed 5.1 another time and had the same error again.
I guess I got to roll back to 5.0.5

Mouse scroll wheel not working properly in ff5

Since upgrading to FF5 the scroll wheel on my mouse doesn't work properly in Firefox - it's works as normal in everything else, just not in Firefox.
When I try scrolling, the wheel clicks (it clicks when turned) 7 or 8 times before the window in FF will scroll, and even then it only scrolls 2 or 3 lines per click. In all prevous versions of FF it would scroll in the same way as it does in all other programs, ie it would scroll 6 lines per wheel click.
It's clearly an issue with FF5 as it only affects FF5 and is annoying enough to make me start using Internet Explorer, which I haven't done for some years.
Anyone else having this problem?

Sorry, this is not possible in the current version of Firefox, but we have an open bug report where we are tracking this issue here:
https://bugzilla.mozilla.org/show_bug.cgi?id=686228
With luck it will be fixed in a future version.

Embedded swf not working properly in Safari MAC browser

hi,
i created an actionscript which renders a background color for a dynamic text
This is working properly in ie,mozilla, chrome. but it's not rendering the color in safari mac..
Does this kind of problem really occur in safari mac browsers?
thanks.

Hey, Anybody have solution or Fixed it by Safari Team support ???

Flash uploader is not working properly in safari 5.1

Hi All,
I'm using safari 5.1 in windows, i had created a flash uploader and when tried to run in safari 5.1 the functionallity below the flash uploader script is not working,
i had tried with safari 3.0 it's working fine. I'm facing the problem only safari 5.1

Hey, Anybody have solution or Fixed it by Safari Team support ???

Touchpad Scroll-buttons not working properly

Hello all,
I was not sure if this is actually a Desktop Environment or Hardware problem, but since it's hardware related I will post it here.
The problem:
On my touchpad (on Acer Aspire 5610Z) I have scroll button for up/down/left/right and until a recent update the scroll buttons need to be clicked repeatably in order to scroll. Before the upgrade and the way I'm expecting to behave is that when I click and hold a button - it should repeat the scroll (I hope you are able to understand it). So basically my problem is that to scroll with the scroll-buttons I have to click it numerous times in order to scroll, instead of just holding the button pressed.
At the same time all other features like two-finger scrolling, gestures etc. are working, but I'm not used to scroll with two fingers and would like to have my scroll-buttons working.
Here is some information about the configuration:
10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
Option "SHMConfig" "on"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on" # enable vertical scroll zone
Option "HorizEdgeScroll" "on" # enable horizontal scroll zone
Option "VertTwoFingerScroll" "on" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "on" # horizontal scroll anywhere with two fingers
EndSection
Output of synclient -l
Parameter settings:
LeftEdge = 1752
RightEdge = 5192
TopEdge = 1620
BottomEdge = 4236
FingerLow = 25
FingerHigh = 30
FingerPress = 256
MaxTapTime = 180
MaxTapMove = 221
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
FastTaps = 0
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 100
HorizScrollDelta = 100
VertEdgeScroll = 1
HorizEdgeScroll = 1
CornerCoasting = 1
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 1
MinSpeed = 1.6
MaxSpeed = 1.75
AccelFactor = 0.087
TrackstickSpeed = 40
EdgeMotionMinZ = 30
EdgeMotionMaxZ = 160
EdgeMotionMinSpeed = 1
EdgeMotionMaxSpeed = 401
EdgeMotionUseAlways = 0
UpDownScrolling = 1
LeftRightScrolling = 1
UpDownScrollRepeat = 1
LeftRightScrollRepeat = 1
ScrollButtonRepeat = 100
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 2
TapButton3 = 3
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
CircScrollDelta = 0.100007
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 1
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 25
VertHysteresis = 25
ClickPad = 0
Output of xinput list :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB2.0 Camera id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
And the last upgrade since the scroll buttons stopped working:
[2012-03-14 08:15] upgraded chromium (17.0.963.78-1 -> 17.0.963.79-1)
[2012-03-14 08:15] > Updating desktop mime database...
[2012-03-14 08:15] upgraded eric (5.1.8-1 -> 5.2.0-1)
[2012-03-14 08:15] upgraded freetype2 (2.4.8-1 -> 2.4.9-1)
[2012-03-14 08:15] upgraded git (1.7.9.3-1 -> 1.7.9.4-1)
[2012-03-14 08:15] upgraded glproto (1.4.14-1 -> 1.4.15-1)
[2012-03-14 08:15] upgraded grep (2.11-1 -> 2.11-2)
[2012-03-14 08:15] upgraded gstreamer0.10 (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-base (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-base-plugins (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-good (0.10.30-2 -> 0.10.31-1)
[2012-03-14 08:15] upgraded gstreamer0.10-good-plugins (0.10.30-2 -> 0.10.31-1)
[2012-03-14 08:15] upgraded xcb-proto (1.6-2 -> 1.7-2)
[2012-03-14 08:15] upgraded libxcb (1.7-2 -> 1.8.1-1)
[2012-03-14 08:15] upgraded libx11 (1.4.4-1 -> 1.4.99.1-1)
[2012-03-14 08:15] upgraded libxt (1.1.2-1 -> 1.1.2-2)
[2012-03-14 08:15] upgraded imagemagick (6.7.5.3-1 -> 6.7.6.0-1)
[2012-03-14 08:15] upgraded inputproto (2.0.2-1 -> 2.2-1)
[2012-03-14 08:15] upgraded libglapi (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:15] upgraded libgl (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:15] upgraded intel-dri (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded kdebase-runtime (4.8.1-1 -> 4.8.1-2)
[2012-03-14 08:16] upgraded khrplatform-devel (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded libegl (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded libgles (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] Users no longer need to be in the 'camera' group to use camera devices
[2012-03-14 08:16] upgraded libgphoto2 (2.4.11-1 -> 2.4.13-1)
[2012-03-14 08:16] upgraded libnids (1.24-1 -> 1.24-2)
[2012-03-14 08:16] upgraded libpciaccess (0.12.1-1 -> 0.13-1)
[2012-03-14 08:16] upgraded libtiff (4.0.0-1 -> 4.0.1-1)
[2012-03-14 08:16] upgraded libxft (2.3.0-1 -> 2.3.0-2)
[2012-03-14 08:16] upgraded libxi (1.4.5-1 -> 1.6.0-1)
[2012-03-14 08:16] upgraded man-pages (3.36-1 -> 3.37-1)
[2012-03-14 08:16] upgraded mesa (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded mpfr (3.1.0.p3-1 -> 3.1.0.p7-1)
[2012-03-14 08:16] upgraded oxygen-gtk2 (1.2.1-1 -> 1.2.2-1)
[2012-03-14 08:16] upgraded oxygen-gtk3 (1.0.1-1 -> 1.0.2-1)
[2012-03-14 08:16] upgraded poppler (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded poppler-glib (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded poppler-qt (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded python-configobj (4.7.2-3 -> 4.7.2-4)
[2012-03-14 08:16] upgraded python-pygments (1.4-5 -> 1.5-1)
[2012-03-14 08:16] upgraded python2-pygments (1.4-5 -> 1.5-1)
[2012-03-14 08:16] upgraded ruby (1.9.3_p125-1 -> 1.9.3_p125-2)
[2012-03-14 08:16] upgraded skype (2.2.0.35-2 -> 2.2.0.35-3)
[2012-03-14 08:16] upgraded xf86-input-evdev (2.6.0-4 -> 2.7.0-1)
[2012-03-14 08:16] upgraded xf86-input-synaptics (1.5.0-1 -> 1.5.99-0.2)
[2012-03-14 08:16] upgraded xf86-input-vmmouse (12.7.0-3 -> 12.8.0-1)
[2012-03-14 08:16] upgraded xf86-video-intel (2.17.0-2 -> 2.18.0-1)
[2012-03-14 08:16] upgraded xf86-video-vmware (11.1.0-1 -> 12.0.0-1)
[2012-03-14 08:16] upgraded xorg-server-common (1.11.4-1 -> 1.12.0-1)
[2012-03-14 08:16] upgraded xorg-server (1.11.4-1 -> 1.12.0-1)
[2012-03-14 08:16] upgraded xorg-xinput (1.5.3-2 -> 1.5.99.1-1)
[2012-03-14 10:51] Running 'pacman -S gimp-devel'
[2012-03-14 10:52] Running 'pacman -S extra/gimp-devel'
[2012-03-14 10:52] Running 'pacman -Syy'
[2012-03-14 10:52] synchronizing package lists
[2012-03-14 10:54] Running 'pacman -S extra/gimp-devel'
[2012-03-14 10:55] Updating font cache... done.
[2012-03-14 10:55] installed gsfonts (1.0.7pre44-3)
[2012-03-14 10:55] installed libwmf (0.2.8.4-9)
[2012-03-14 10:55] installed babl (0.1.6-1)
[2012-03-14 10:55] installed gegl (0.1.8-2)
[2012-03-14 10:55] installed gimp-devel (2.7.5-1)
[2012-03-14 11:01] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.26J/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
[2012-03-14 11:02] installed gimp-photoshop-brush (1.0-1)
[2012-03-14 11:02] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.Jc0/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
[2012-03-14 11:02] upgraded gimp-photoshop-brush (1.0-1 -> 1.0-1)
[2012-03-14 11:03] Running 'pacman -S --asdeps --needed extra/perl-xml-parser extra/intltool'
[2012-03-14 11:03] installed perl-xml-parser (2.41-2)
[2012-03-14 11:03] installed intltool (0.50.1-1)
[2012-03-14 11:03] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.GVM/gimp-plugin-saveforweb-0.29.3-1-i686.pkg.tar.xz'
[2012-03-14 11:03] installed gimp-plugin-saveforweb (0.29.3-1)
[2012-03-14 11:04] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.OX1/gimpfx-foundry-2.6_1-2-i686.pkg.tar.xz'
[2012-03-14 11:04] installed gimpfx-foundry (2.6_1-2)
[2012-03-14 20:27] Running 'pacman -Syy'
[2012-03-14 20:27] synchronizing package lists
[2012-03-14 20:30] Running 'pacman -Syu'
[2012-03-14 20:30] synchronizing package lists
I thank you in advance for your suggestions

I'm afraid the problem is in driver.
I compared sources of input-synaptics 1.6.3 and 1.7.0 and it seems that author has cut off the functionality of "repeating" scrollbuttons
Here's the announce of this new version:
http://lists.freedesktop.org/archives/x … 55593.html
And we can read there: "Purge scrollbuttons (repeat)".
Strange decision I think...

Videos from Yahoo or other websites not working properly in Safari

Videos from Yahoo or other websites are not working in Safari on Ipod Touch. I downloaded the plugin, but still it does not work.
Is this functionality supported?

Mr. Jobs, who for some reason can't get an Apple employee avatar (seems strange doesn't it?) is correct that there is no Flash plugin for the iPhone/Touch. Apple did not want to use Flash lite for the the iPhone, which has a full browser, and according to the CEO for Adobe they underestimated the difficulty level in creating a version for the iPhone/Touch. He did say the "ball is in their court", and that Apple (that has had previous battles with Adobe) did have engineers working to help them.
Of course now that the CEO of Apple is calling their code "hideous" the cooperation may end.

Keyboard not working properly in safari for windows

I just started using Safari for windows and been using it for a couple of days. Today when I attempt to enter text, the letters will not register on the screen and when I hit the spacebar the screen scrolls down. Very frustrating. I have checked other applications and do not have this problem.

Apple no longer supports Safari for Windows > Apple apparently kills Windows PC support in Safari
Use IE or Chrome instead.

Flash and Drop down not working properly on safari

I have some of my safari users experiencing trouble with my
swishmas flash image on my home page. Apparently it is causing my
drop down menu to disapear when it is selected. I know its related
to the image because yesterday i was experiencing issues with
firefox. I think its related to the transparent parameter. Anyone
run into this problem?
Any help anyone can provide is greatly appreciated!!
I just posted some changes, can someone test this url:
http://arcdev2.dcis.net/index3.html
here is the code I'm using:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,42,0"
id="home5"
width="800" height="280"
>
<param name="wmode" value="transparent">
<param name="movie" value="/images/index/home5.swf">
<param name="bgcolor" value="#FFFFFF">
<param name="quality" value="high">
<param name="allowscriptaccess" value="samedomain">
<embed
wmode="transparent"
type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
name="home5"
width="800" height="280"
src="/images/index/home5.swf"
bgcolor="#FFFFFF"
quality="high"
swliveconnect="true"
allowscriptaccess="samedomain"
>
</embed>

Hey, just wanted to say I'm having the same problem as you.
You can see my site in progress here:
http://www.maconstate.edu/nathan/
I can't get anything to stay on top of the Flash banner in
Safari. I noticed it's happening on the Adobe site as well. Is this
something that is being addressed by the Safari dev team?

Touchpaad dual finger scrolling is not working

i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........

Shanks_Jd wrote:
i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........
Hi Shanks_Jd
Please give your following details: Operating system & 32 or 64-bit?
Hope the model you are having is HP 15-d103 Notebook PC. Hope you have downloaded the latest Synaptics Touchpad driver from your HP product website.
Go to: Troubleshoot your touchpad and follow the steps given there.
Go through HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad specifically.
Also, check whether 2-finger scrolling is enabled in Synaptics touchpad controls:
Go to Control Panel --> Hardware & Sound --> Synaptics Touchpad icon below
It'll open Propeties of Synaptics touchpad window.
Enable Multi-finger gestures, Two-finger scrolling & Scrolling by checking mark them. Click Apply, OK.
Restart the system.
Hope this resolves your issue
Thanks
Visruth
*CLICK "ACCEPT AS SOLUTION" TO HELP OTHERS WITH THE SAME PROBLEM*
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

YouTube is not working properly of my Safari. Can you help fix it?

So for some reason YouTube is not working properly on my Safari. I don't know why but its normal for Chrome. Can anyone help me fix this? Here is what is happening.

This looks like an emerging issue with YouTube. But, to make sure:
1) Quit safari (command + q with it open)
2) Open finder. Click on "go" on the top menu bar, then click on "go to folder." In the prompt that comes up, type in:
~/library
3) Pull the caches folder to the trash. This will ask for your password
4) Open Safari. Click "Safari" by the Apple logo, then click "reset safari." Make sure everything is selected, then reset safari.
5) Try again.
If that doesn't work, the resolution by someone else I was working with (see thread here) was:
daMeeze wrote:
I was able to access help topics in YT by not signing in. Massive numbers of ppl with same issue. Fixed by signing in and scrolling to bottom of page to "Something New" and trying out the Feather beta test. It sounds like a YT issue *whew*. THANK YOU for sticking with me :-)

Scroll is not working properly in safari 5.1 in window as well as Mac PC.

Similar Messages

Maybe you are looking for