Scroll is not working when results seen trhu SP01.

Hi all,
I have observed an issue , in one of mine report, when I see list using SP01 spool list , Scroll is not working.
I have used SET LEFT SCROLL-BOUNDARY . It is working if i run this report in Foreground.. but my need is to schedule that report, and see the results thru SP01. using SP01 Freezing is not working.
Any one have any idea about this, please do help me out.
Thanks in Advance.

Hi,
None of the interactive functions will work once the output is on the static spool.
Regards,
Darren

Similar Messages

Mouse Scroll Wheel not working when iTunes is on secondary monitor

Hi,
This is a pretty convoluted problem, but I run two monitors (from the one RADEON videocard) and it seems that the iTunes7 window won't recognize input from my mouse's scroll wheel when the window is positioned on my "secondary" monitor.
I know, it's weird, but it's the case.
I guess this counts more as a bug report than anything else, but I'm hoping something can be done about this soon!
M

Good call. I can confirm that the scroll wheel works any time that your mouse is in a positive coordinate location, does not work in a negative coordinate location. It doesn't matter whether the window straddles the two monitors - only what the mouse coordinate is. This applies for left monitors and (not nearly as common) monitors on top.
This goes to show that it's generally a bad idea to rewrite your own scrolling windows - you're bound to introduce bugs for some combination of input/output devices.

Scroll button not working when outside

So it seems that whenever I am outside, sitting or walking, especially if it is windy or even when there is a slight draft passing by my phone, I cannot scroll or text/type without the cursor going all over the place. I'll be typing something, or looking through something, and all of sudden I'm taken to the top of the page, or the beginning of the line..and sometimes when I type, the letters automatically become symbols and acquire accents.. It is unbelievably frustrating trying to type a text or do anything while I am outside. Does anyone else have this type of issue with their BlackBerry?

You probably have something messing with the sensor, try putting a small amount of rubbing alcahol on the wheel and moving it around and that should clear it out. If that doesn't work, it probably is broken :/

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.

Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid

When I set a panorama picture as my wallpaper, the live scrolling is not working. Anyone else having this problem?

When I set a panorama picture as my wallpaper in my iPhone 5, the live scrolling is not working. Anyone else having this problem?
Please help me to solve this

Everyone is having the "problem".
That beta feature is not in the final release of iOS 7.

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Scroll wheel not working in Mavericks

Update to OS X Mavericks resulted in mouse scroll wheel not working any more at all in any application. Any suggestions for get scroll wheel function working would be appreciated. Thanks!

Just to understand the sequence: you have this problem when you are in a Firefox tab, click a link, and it opens in a:
* new window
* new tab
* same tab
I'm guessing a new window. Since the title bar area is a bit faded, some other window must have the focus, but which one?? If you press and hold the Alt key and press and release the Tab key, you should get the visual Task Switcher pane. The icon to the left of the current highlighted icon indicates the window that had the focus. If you then click that first icon, is it another Firefox window, or some other app?

Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

Hello, Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem? please help me sincerely, Karel

I would try installing the Windows 8.1 (64-bit) Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode. Try the available earlier versions if the current driver does not work for you.
If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4 and watch it from there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Report with JDBC connection does not work when they includes CommandTable

I am trying to render using the new version of Crystal report java component - CRJ a report contains Data base Fileds of type Command Table (Row Set) which seems to be not working.
when i use the previes version of crystal SDK it works fine.
after deugging the Sample CrystalHelper.java file which contains the method .changeDatasource()
i found that the DataBaseController.setLocation() method changes the CommandTable class to Table when using it on CommandTable instance and as result all the fields defined into that CommandTable were disappear.

That appears to be a known issue: Eclipse JRC: To change the JDBC connection at run time
Sincerely,
Ted Ueda

Scroll wheel not working in Community Help App (Windows 7 64bit)

I am using the Community Help App on both a Windows 7 32 bit machine and a Windows 7 64 bit machine.
On the 32 bit machine, the mousewheel scrolls the content pane just fine.
On my 64 bit machine, the mousewheel will not scroll the content pane. I have to use the scroll bar on the right (click and hold to scroll the content).
This appears to the be case for all Adobe Air apps, as this functionality is identical in Adobe Story.
I am using a Microsoft Wireless Mobile 4000 mouse on the Windows 7 machine.
Is anyone else having this problem on 64 bit Windows 7 machines?

I'm frustrated, too, because of the scroll wheel issue with any AIR applications.
Running Windows 7 Home Premium N 32 bit.
Using Microsoft Comfort Optical Mouse 3000 (wired, not wireless) - current drivers.
Scroll wheel will not work when rolled normally, no matter what sensitivity I set the wheel to. To get any scrolling action, I have to roll the wheel as fast as I can. Then, it will scroll, but in horrible chunky bits, which ends up being wildly inaccurate and extremely frustrating.
I've heard of many other people having this issue. It's only when the program I'm using is an AIR application, which leads me to believe that Adobe did something to make AIR incompatible with a MS mouse & Win 7 OS. (I have used the same mouse running Vista and scrolled fine in an AIR application.)
Is Adobe going to correct this situation?

I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

Why does the internet on my new macbook pro not work when my old macbook's does?

Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

Scroll is not working when results seen trhu SP01.

Similar Messages

Maybe you are looking for