Scroll is not working

Hi guys, my macbook pro's scroll would automatically go up when i tried to scroll down. Scrolling as in everything; when i'm viewing photos, msn, safari, even in the setting page etc. Whatever pages that i need to drag down, it goes up on its own. Not all the time though. After restarting it would be okay. What's going on? Please help!

Do a SMC reset:
_SMC RESET_
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
Roger

Similar Messages

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Scroll is not working when results seen trhu SP01.

Hi all,
I have observed an issue , in one of mine report, when I see list using SP01 spool list , Scroll is not working.
I have used SET LEFT SCROLL-BOUNDARY . It is working if i run this report in Foreground.. but my need is to schedule that report, and see the results thru SP01. using SP01 Freezing is not working.
Any one have any idea about this, please do help me out.
Thanks in Advance.

Hi,
None of the interactive functions will work once the output is on the static spool.
Regards,
Darren

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

When I set a panorama picture as my wallpaper, the live scrolling is not working. Anyone else having this problem?

When I set a panorama picture as my wallpaper in my iPhone 5, the live scrolling is not working. Anyone else having this problem?
Please help me to solve this

Everyone is having the "problem".
That beta feature is not in the final release of iOS 7.

Scroll wheel not working in Mavericks

Update to OS X Mavericks resulted in mouse scroll wheel not working any more at all in any application. Any suggestions for get scroll wheel function working would be appreciated. Thanks!

Just to understand the sequence: you have this problem when you are in a Firefox tab, click a link, and it opens in a:
* new window
* new tab
* same tab
I'm guessing a new window. Since the title bar area is a bit faded, some other window must have the focus, but which one?? If you press and hold the Alt key and press and release the Tab key, you should get the visual Task Switcher pane. The icon to the left of the current highlighted icon indicates the window that had the focus. If you then click that first icon, is it another Firefox window, or some other app?

Scrolling does not work in LR

I've been frustrated by this for a while now. When in LR (currently on version 4.2, but same thing happens in earlier versions too), scrolling does nothing. If i'm trying to scroll up or down a panel, nothing happens.
I'm on a Lenovo W701 running Win & 64bit. The scrolling does not work using either the track point or the touchpad.
The work properly in all other applications.
The pointer will change to an icon the represents scrolling while in LR, but nothing happens. Any thoughts or suggestions?
If there is any other information that you might need, let me know.
Thanks!
Quinn

What about a mouse? Does the wheel scroll?
Sent from phone.

Why does the scroll sometimes not work?

I know this question has been posted before, but my problem is slightly different. I have synpatics touchpad with my laptop. Sometimes, the touchpad scrolling does not work, but my actual wireless mouse scrolling works. Sometimes my wireless mouse scrolling does not work, but my touchpad scrolling works. Why does this happen? The problem itself is not consistent.
The scrolling usually stops suddenly. Scrolling works perfectly fine for a webpage, but then it stops working during the middle of my scrolling. This problem started to bug me.
The problem still exists with Firefox reinstalled and without add-ons.

Does this happen on another browser? (eg. Chrome, IE)

My two finger scroll is not working

My two finger scroll does not work on Firef

hey natchilds, try to switch off smooth scrolling in preferences > advanced > general

Touchpaad dual finger scrolling is not working

i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........

Shanks_Jd wrote:
i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........
Hi Shanks_Jd
Please give your following details: Operating system & 32 or 64-bit?
Hope the model you are having is HP 15-d103 Notebook PC. Hope you have downloaded the latest Synaptics Touchpad driver from your HP product website.
Go to: Troubleshoot your touchpad and follow the steps given there.
Go through HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad specifically.
Also, check whether 2-finger scrolling is enabled in Synaptics touchpad controls:
Go to Control Panel --> Hardware & Sound --> Synaptics Touchpad icon below
It'll open Propeties of Synaptics touchpad window.
Enable Multi-finger gestures, Two-finger scrolling & Scrolling by checking mark them. Click Apply, OK.
Restart the system.
Hope this resolves your issue
Thanks
Visruth
*CLICK "ACCEPT AS SOLUTION" TO HELP OTHERS WITH THE SAME PROBLEM*
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Scroll does not work.

Hi,
Scroll does not works.
How can I fix it?
P.S Photoshop CC 2014.2.2
Thanks,
Max

I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them. Even the guest login's trackpad worked perfectly but not the main admin account.
First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
Solution:
I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions to access the old admin users Library But I chose to boot
from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder BY Host. It has special hidden files. Other way is to copy the Preferences folder we'll say into the Desktop.
I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
I'm leaving this solution because there's someone else in the MacWorld with the same issue.
Ted

Safari scrolling does not work in osx mavericks please solve this issue

safari scrolling does not work in osx mavericks please solve this issue

I know it is a limited topic, but could you provide a little more detail?

Two finger scrolling does not work on my MacBook (late 2008)

Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad. Yes, I've set system preferences. Suspect a driver or s/w problem. Ideas?

Saw another post that hinted that you need to go to accessibility settings:
System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
Enable scrolling (and I enabled dragging while I was at it and it worked. Looks like wierd things can get set even if you don't mean it to.

My laptop touchpad scrolling is not working

Hi,
i am pritam,I am using hp15d017tu laptop,which came with free dos .I installed it to windows 8 pro but now the touchpad scrolling is not working.
these have not fixed my scroll at all.No other gesture are working either.The only I can do is point and click on by touchpad.
So,please help me.

Hi can u help me out with the serial and product number of the unit please

Scroll is not working IE for OATs test

Hi All,
when i wrote a OATS test i need to scoll down, but in IE scroll is not working whereas same code working in Mozilla could anyone please suggest on this
regards
shanmukh

Hi,
Try using .scroll(String scrollLeft, String scrollTop) or .keyPress(String key)
Or
You can use Robot in Java.
Eg- Robot rob = new Robot();
rob.keyPress(KeyEvent.VK_DOWN );
rob.keyRelease(KeyEvent.VK_DOWN );
or
rob.mouseWheel(5);Regards,
Deepu M

MB Air two finger scroll does not work for a user but does for another

Hi
MB Air. 10.9.3.
Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
Tried this in Terminal:
defaults write -g com.apple.trackpad.scrollBehavior 2
Any ideas?

This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

Scroll is not working

Similar Messages

Maybe you are looking for