Scroll/Num Lock and Caps Lock LED's blinking not starting

Hi, I have a problem with my Pavillion dv4-1222nr. It was fine last night and this morning when I turned it on the Scroll/Num Lock and Caps Lock lights started blinking. I turned it off and on several times and still a blank screen and blinking lights also the light that shows the hard drive is running is not on. I can hear the fan from the processor and the dvdr engaging oh, that light is blinking too. I pulled out the battery to see if it would reset but it didn't work. Can anyone please help

Hi, I have a HP Pavillon Dv4 1225 dx. Since a week when I turn it on I hear a noise that seems that it is going to start but it doesn´t. The scroll, num block and caps looks bottom are blinking all time and the screen remains as if it were off, even if I wait for an a half an hour. I tried changing the memories, connecting another monitor, checking the battery but it doesn´t work. I would be great if you could give me an advice about what can I do to solve the problem. Kind regards

Similar Messages

DV6 Flashing Num Lock and Cap Lock Keys on Startup

Hi All,
Currently I'm having issues with my HP DV6 notebook when turning it on I am experiencing issues whereby the Num Lock and Caps Lock Lights are flashing and the screen is remaining blank the Sound, WIFI and Volume controls are all showing as orange I am having to take the battery out wait two minutes before trying to reboot the laptop when it works again, this issue is happening intermittently
Thanks,
Chris

Hi Chris,
See if you can match the pattern of the 'blinks' to those shown on the table below - this may atleast give you a better idea of what the problem is.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Select keys not working (including num lock and caps lock) PRAM won't rese

Help, I have a number of keys that stopped working including the "o" "9" number lock and caps lock (the lights on the number lock and caps lock don't work)
oh- I'm writing this from another computer so all are working on this one, let you think i'm crazy.
Tried to reset the SMC per instructions. Sounds like there is no "confirmation" that that was done. Tried resetting my pram (comand option p r) I don't get the "reset" sounds, it just boots up as normaal.
Suggestions????
Thanks

Welcome to Apple Discussions!
Have you tried an external keyboard? If an external keyboard works without issue, there is something wrong with your built in keyboard. If you get the same issues, you may have a software problem or glitch of some sort.
If you create a new user account, do you still have the same problems? If not, there could be a problem with your usual account.
Was there ever a spill or anything that might have affected your built in keyboard?
Good luck!

Lion - num lock and caps lock keys problem

Since installing lion I have to have num lock key and caps lock key turned on to type normally (otherwise I get all numbers if num lock off, or all caps if cap lock off). It's like the keys' functions have been reversed. (2.16 GHz MacBook).
Any help much appreciated.

CHi Chubrock
if you run Windows 8 and I guess you have backlit keyboard for your GT70 ONE, please try to download new firmware here, and give it a try, I guess the worng firmware installed in your system , please choose the firmware with backlit KB and install , good luck
http://www.msi.com/product/nb/GT70-0NE.html#/?div=Firmware&nbos=win8

Number lock and caps lock are stuck

help! number lock key seems to be stuck!
i can only write lower case letters when the number lock is on and the caps lock is on.
when the caps lock is off, i type capitals.
when the numbers lock is off, only the number keys work on the keyboard.
how do i get the keyboard back to normal?

Hi bluecrop, and a warm welcome to the forums!
Tough to tell from here, but may be some Corruption.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
Reboot, test again.
If it only does it in Regular Boot and not in Safe Mode, then it is likely some 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Also see what is in System Preferences>Other Row.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
Another way to test is create a new Account, login to that one & see if it happens there.

DV6 Flashing 2 times Num Lock and Cap Lock Keys on Startup

Hi all.
My computer (HP Pavillion DV6-2062eo) flashes 2 times on CAPS and NUM LOCK when turned on.
The tables on former post-messages says it's BIOS Corruption.
How to solve this ??
Regards,
Frank

Hi Chris,
See if you can match the pattern of the 'blinks' to those shown on the table below - this may atleast give you a better idea of what the problem is.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cap Lock and Number Lock

I recently upgraded my MacBook to Leopard two days ago. Just a few minutes ago, I needed to hard restart my mac (i've been having problems with this, i'm having it checked on fri. in the genius bar). I noticed when it restarted the num lock and cap lock button lit up. When i press them again to turn off the light. my "letter" buttons can only type with numbers. When i have the num lock on the keyboard works fine. Same with the cap lock button. It needs to be on in order for the letter NOT be capitalized. Is there a way to fix this?

I guess it was glitch. I restarted my computer and it works fine.

Elitebook9470 not turning on,scroll and cap lock keys light up

I have an elitebook9470 which is about 2 years old. When I turn my laptop on the keys light up but the monitor remains blank. Then the scroll and caps lock keys light up however nothing appears on the monitor. I have charged my laptop and I am unsure if it is related to low power. I have tried attaching the laptop to an external monitor but no signal appears. Any help regarding this will be appreaciated. thanks for your help.
Regards
nush

Hi @Nush 2015 ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link on computer does not start.
You could reset the BIOS with this document selecting the reloading the BIOS default settings.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Pavilion DV4-1070ee got stuck on a blank screen and numlock and caps lock LED are blinking..

My pavilion dv4-1070 got stuck on a blank screen and numlock and caps lock LED are blinking... it happens when i update the BIOS.. please help... thanks

Hello,
I see that you're having an issue with the notebook giving you a black screen. I also noticed you said only the NumLock and Caps lock is blinking.
Now, the BIOS update could have because this but we won't know until you let me know how many times the LED blinks.
Here is a chart which will tell us what's causing the issue.
Please let me know the outcome.
THX

Laptop won't start quickly but power wifi and caps lock light keeps blinking

Hi, it has happened before too but rarely but nowadays it happens on daily purposes.
When I switch on my laptop after leaving it for 8-9 hrs, it won't start up but instead power, wifi and caps lock light keep blinking. I tried removing battery and pressing power button for few minutes but nothing happens. Then i left it like that with lights blinking and after 15 20 minutes it booted. I did same yesterday too. I left it like that it booted after 20 minutes..so My question is "why is this happening? Is it a motherboard issue or is it because of cold moisturous weather here and laptop takes time to get warm up?" Should I show it to HP Service center?

Hi @Nishant5788
Welcome to the HP Support Forums. I see that you are having a problem getting your notebook to boot up normally. As for what is causing the problem the blinking Caps Lock should tell us what is causing the problem as it should be blinking in a pattern. This HP document Computer Does Not Start and LEDs blink has a chart that will tell you what the blink codes mean.
This is most likely a hardware issue and you can give us a call regarding repair options. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HP ProBook 6540b won't boot and caps lock "blinking" continuously.

Hi,
I'm trying to help a friend with his laptop a Probook 6540b.
It won't boot and caps lock "blinking" continuously.
When I got it caps lock and num lock was "blinking" tre times... indicated memory problems, reseated the memory modules
and the the "tre time blinking" disappeared, but caps lock now blinking continuously and the only way to shot down the computer
is to disconnect the power.
Anyone with some ideas???
Janson

A neighbor had the same problem and asked for my assistance. I created a rescue disk using my HP desktop running Windows 7 64-bit. Even though her HP laptop was running Windows 7 32-bit, the disk allowed me to boot into windows on her computer. I then went to the HP web site and downloaded the latest BIOS and then flashed it to the BIOS chip following the instructions that came with the download. Everything is working fine now. Hope this helps.

Keyboard delete and caps lock keys not working after update

Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
2. Update key board driver (standard PS/2)..it says latest version is installed.
3. Uninstall and reinstall.
4. Reset using the remove batteryt hold down power key option.
The caps lock and delete does not work in Notepad or MS Word.
It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
I am using Windows 7 Home premium on a 64 bit HP G62.
help appreciated as ever
thanks
matyiii

matyiii wrote:
Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
regards
Matyiii
Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Typing in remote Control when changing language with key combination of Alt + Shift some time change to Upper Case and Caps Lock is off

let me first say that this links dos not apply to my problem the first one is :
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/46b24b68-debf-466e-a780-66a3b999724c
and it dos not apply because I dont use remote app, and also i able to change settings
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/6a0f0eda-d3f6-4cd9-91ef-a7e0b20bc799/
this one has similar problem but he working with remote app and do not have the Upper Case and Caps Lock is off
http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/f978e234-2b3c-4780-9dda-bec52b25330d
this one using XP i have it on windows 7 connecting to remote server 2008 r2
here is the issue
my users remote control a terminal services farm, now when they changing language to English some time it change to English Upper Case and caps lock is off ! then the Alt + Shift and the go back to English lower case and if they just play with
this (i mean they just use Alt Shift over and over to try to get back to normal state when you hold shift and alt and you change to English and back to Hebrew if you hold the alt shift one more time )
i tonic some thing strange ifi hold down first the alt and then the shift this issue happen more often
i upload a video on this showing the problem live on my dropbox :
https://dl.dropboxusercontent.com/u/103434771/meditowers/IMG_0245.MOV
here is how the normal setting should be
Alt + shift need to change to lower case English
then Alt shift one more time will go back to Hebrew
now if you hit on the caps lock you will be in English all the time with Upper Case

Hi Yitzhak,
Please refer to this post:
www.davidbond.net/2012/10/rdp-shift-key-gets-stuck.html
This post includes fix to this issue at the comments.
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Letter keys and Caps lock not responding

So, I've run into a very odd problem several times now, and I was wondering if anyone had encountered anything like it. Basically, the computer stops responding to the letter keys and cap lock will no longer turn on (light doesn't even turn on), but the arrow keys, command, and tab still work. The only way I have found to make the keys respond again is to reboot.
This has so far occured at two different occasions: Once, while using Blender 2.49b, and several times while playing the game "Warcraft 3: the Frozen throne." The only similarity I noticed between them is that they both fill the entire screen. The problem has not occurred anywhere else, although it persists after quitting the application.
Does anyone have any ideas?

I have been researching a lot on the internet re: 10.6.7 macbook's built-in keyboard's arrow keys are not responding! Been doing it for more than a month. I even saw a HARDWARE Troubleshooting at Youtube, by taking out the battery and tighten some screws for the keyboard, that people do by themselves and most of them say they get it fixed. Since I AM NOT techy I still tried to search for more resolutions at least before I spend money to bring my Macbook to a repair store! And finally! Thank God!!!! THIS RESOLUTION JUST FIXED MY PROBLEM w/o having to TECHNICALLY open my Macbook, take the battery out and screw harder some screws inside the laptop! THANK YOU SO MUCH FOR SHARING THIS RESOLUTION! ^_^

Delete and caps lock keys not working?

my delete and caps lock keys are not working after they previously did before i shut my computer down,any suggestions?

Take it to an Apple store or AASP.

Scroll/Num Lock and Caps Lock LED's blinking not starting

Similar Messages

Maybe you are looking for