Scroll through long list (Photo and iPod)

Hi!
I'm the new guy here so be gentle...
Any way to scroll through a long list in iPod or Photo, as you can with Contacts (by dragging up/down on the leters at left)?
I know you can tap and view a single photo then scroll through at the bottom.
When viewing all photos, there is a scroll bar on the right but can't drag it.
Same in iPod.
Drag and flick work but if there is more than a page or two, it's a pain.

+I was hoping maybe there's a three finger, double tap, right swipe, followed by a half clockwise circle to get the bottom/top+
Well, yes there is but then I would have to show you the secret hand shake and swear you to secrecy.
+It's got the slider on the right side but it's just for looks. You can't grab it and slide it+
I still haven't figured the point of that, maybe a future enhancement?
There has been a lot of grumbling about the unfriendly nature of Photos for people with a lot of images. Maybe Apple is listening and will do something about it. I keep hoping one of the iOS upgrades will include folders/albums from within Photos instead of relying on syncing.
Also note that you can not delete images from Photos that have been added by syncing through iTunes...have to delete them back in iTunes.
But still, the iPad is a terrific photo display device due to its size.

Similar Messages

  • Whenever I open my music and select a song, my iphone immediately scrolls through other songs rapidly and then I get a pop up saying "the requested url cannot be served" and I can never listen to music

    Whenever I open my music and select a song, my iphone immediately scrolls through other songs rapidly and then I get a pop up saying "the requested url cannot be served" and I can never listen to music

    I'm in the same boat...so far no one has helped here

  • IPOD Mini Automatically scrolls through play list

    I am not sure what is going on but I turn my IPOD Mini on and when I go to playlist and songs recently purchased and try and play something it automatically starts going through every song when I try to stop it may for a moment but I cannot get anything to play it just keeps going through everything. I am at a loss to find out what is going on. I have had this for a year and never a problem. I did not drop it nor did I bang it against anything...Any advise?

    See this article first.
    iPod does not play content purchased from the iTMS.
    If you have made sure that both the iTunes and iPod software are current and have deauthorized and reauthorized your computer, try this test:
    1. Deauthorize the computer.
    2. Create a new user in the system.
    3. Download the free song of the week from the iTMS in the new user account.
    4. Play the song in that user account to authorize again.
    5. Restore the iPod (using the iPod updater) in the new user account.
    6. Sync just the free song of the week and see if it plays on the iPod.
    If it does, you appear to have a corrupted iTunes library file, and you should recreate the iTunes library file in your normal user account, and then sync your music back to the iPod and all should be well.
    The following articles will help you.
    Authorization and Deauthorization.
    How to restore the iPod.
    How to recreate your iTunes library.
    How to create a new user account in Windows.

  • Illustrator 5.5 crashes when scrolling through font list

    I'm running on a macbook pro OS 10.7.4 and illustrator 5.5 crashes everytime I open a new document, select the type tool and scroll through the font list from the font menu list. It scrolls about 25% down the list then crashes the software.

    I also have a MacBook Pro (retina) and am running OS X Mountain Lion. I, too, have this problem. This is 100% reproducable, on a newly installed system. The crash report always contains something like this:
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000017c1f004
    VM Regions Near 0x17c1f004:
        MALLOC_LARGE           0000000017a38000-0000000017c1f000 [ 1948K] rw-/rwx SM=PRV 
    --> mapped file            0000000017c1f000-0000000017cbe000 [  636K] r--/rwx SM=COW  /System/Library/Fonts/MarkerFelt.ttc
        mapped file            0000000017cbe000-0000000017d5e000 [  640K] r--/rwx SM=COW  /Library/Fonts/Microsoft Sans Serif.ttf
    ...which looks like it might be font corruption; however, the fonts a different every time the crash happens. Here are two others:
    VM Regions Near 0x17f61004:
        MALLOC_LARGE           0000000017b94000-0000000017f61000 [ 3892K] rw-/rwx SM=PRV 
    --> mapped file            0000000017f61000-0000000017fd6000 [  468K] r--/rwx SM=COW  /Library/Fonts/Skia.ttf
        CG image               0000000017fd6000-000000001804c000 [  472K] rw-/rwx SM=PRV 
    VM Regions Near 0x18df1000:
        MALLOC_LARGE           0000000018bb3000-0000000018df1000 [ 2296K] rw-/rwx SM=PRV 
    -->
        mapped file            00000000190f3000-000000001916a000 [  476K] r--/rwx SM=COW  /Library/Fonts/Chalkduster.ttf
    What is the same is the stack. At the top of the stack is a bunch of toolbox drawing calls:
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.HIToolbox                     0x932bc338 HIStandardMenuView::DrawItem(unsigned char, CGContext*, unsigned char) + 2616
    1   com.apple.HIToolbox                     0x932bb646 HIStandardMenuView::DrawSelf(short, __HIShape const*, CGContext*) + 492
    2   com.apple.HIToolbox                     0x932f25dc HIView::DrawCacheOrSelf(short, __HIShape const*, CGContext*) + 364
    3   com.apple.HIToolbox                     0x932f22d9 HIView::SendDraw(short, OpaqueGrafPtr*, __HIShape const*, CGContext*) + 125
    4   com.apple.HIToolbox                     0x9337ef35 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 759
    5   com.apple.HIToolbox                     0x9337f2bc HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 1662
    6   com.apple.HIToolbox                     0x9337f2bc HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 1662
    7   com.apple.HIToolbox                     0x9337e350 HIView::DrawComposited(short, OpaqueGrafPtr*, __HIShape const*, unsigned long, HIView*, CGContext*) + 802
    8   com.apple.HIToolbox                     0x9337dfe2 HIView::Draw(short, OpaqueGrafPtr*, unsigned long) + 82
    9   com.apple.HIToolbox                     0x9337df89 HIView::Render(unsigned long, CGContext*) + 45
    10  com.apple.HIToolbox                     0x932fabb0 FlushWindowObject(WindowData*, void**, unsigned char) + 812
    11  com.apple.HIToolbox                     0x93303529 FlushAllBuffers(__CFRunLoopObserver*, unsigned long, void*) + 245
    12  com.apple.CoreFoundation                0x993fa51e __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 30
    13  com.apple.CoreFoundation                0x993fa45d __CFRunLoopDoObservers + 381
    14  com.apple.CoreFoundation                0x993d3d53 CFRunLoopRunSpecific + 355
    15  com.apple.CoreFoundation                0x993d3bdb CFRunLoopRunInMode + 123
    16  com.apple.HIToolbox                     0x932fc8aa RunCurrentEventLoopInMode + 242
    17  com.apple.HIToolbox                     0x932fc545 ReceiveNextEventCommon + 162
    18  com.apple.HIToolbox                     0x932c1126 AcquireNextEventInMode + 68
    19  com.apple.HIToolbox                     0x932be6bd IsUserStillTracking(MenuSelectData*, unsigned char*) + 372
    20  com.apple.HIToolbox                     0x932abdde TrackMenuCommon(MenuSelectData&, unsigned char*) + 1724
    21  com.apple.HIToolbox                     0x9349de2d PopUpMenuSelectCore(MenuData*, Point, double, Point, unsigned short, unsigned int, Rect const*, unsigned short, unsigned long, Rect const*, Rect const*, __CFString const*, OpaqueMenuRef**, unsigned short*) + 1733
    22  com.apple.HIToolbox                     0x9349e60c PopUpMenuSelect + 252
    All of these look like the bit that is failing is the bit that is poping up a submenu of the various font weights.
    The top-most Adobe-written function on the stack is:
    23  com.adobe.illustrator                   0x005e4f9d AWS_CUI_RevertAlert(OpaqueWindowPtr*, adobe::aws::gen::String<unsigned short>&, adobe::aws::gen::String<unsigned short>&) + 2707053
    24  com.adobe.illustrator                   0x0041a591 AWS_CUI_RevertAlert(OpaqueWindowPtr*, adobe::aws::gen::String<unsigned short>&, adobe::aws::gen::String<unsigned short>&) + 828513
    25  com.adobe.coretech.adm                  0x124bc751 ADMBase::DoTrack(ADMTracker&) + 141
    26  com.adobe.coretech.adm                  0x124eb8f5 ADMItem::DoTrack(ADMTracker&) + 35
    27  com.adobe.coretech.adm                  0x1250f0fd ADMTracker::CallTrack() + 417
    28  com.adobe.coretech.adm                  0x1253613d MacTracker::MacDispatchEvent(unsigned short, NPoint, ADMModifiers, unsigned long, unsigned long) + 517
    Beneath this is just standard event processing, main loop stuff.

  • How scroll through a list of items in list box with code in C# winforms to create auto scrolling

    I am new to programming and I have been tasked to create a form to display information in list box controls on a big screen. The list boxes have to show all data by auto scrolling through all data row by row then start again at the top once it has displayed
    all data. Is there a way to do this automatically in code using a timer? I look all over the web and have not found any way to do this in win win forms. Is it possible?
    Thanks 

    Here's the c# code
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Text;
    using System.Windows.Forms;
    namespace WindowsApplication13
    public partial class Form1 : Form
    System.Timers.Timer timer = new System.Timers.Timer();
    int position = 0;
    public delegate void delegateUpdateListbox();
    public Form1()
    InitializeComponent();
    private void Form1_Load(object sender, EventArgs e)
    timer.Interval = 1000;
    timer.Enabled = true;
    timer.Elapsed += new System.Timers.ElapsedEventHandler(timer_Elapsed);
    void timer_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
    position += 1;
    if (position == listBox1.Items.Count)
    position = 0;
    delegateUpdateListbox deleg = new delegateUpdateListbox(updateListbox);
    this.Invoke(deleg);
    void updateListbox()
    listBox1.SelectedIndex = position;
    As long as the listbox's SelectionMode is set to "One" (the default), you don't have to do anything to un-select the previous item.
    For your secnd question, the code inside the timer checks whether the position is the same as the length of the contents of the listbox and resets its value to zero, so that the selection will go back to the first item in the list.

  • Scrolling a long list?

    I'm sure this is simple - how do you build a long list of names to scroll up the screen, like movie credits?
    thanks

    If you drag the corner of the presentation window, you can expand it so that it shows "blank" area to the left and bottom of the slide area -- doing this will allow you to see material that starts off of the slide itself. To scroll the text box up, position it so that its top edge is below the slide bottom, set the Build Out to "Move Out", and the direction to "Bottom to Top". Set the duration to fairly slow in order to make the text readable. The Move Out build has acceleration and deceleration built in to it, so you might also want to put some blank spaces in at the beginning and end of the text list in order to make the text scroll speed appear constant.
    Another way of doing this is to use a Move Action (from the "Action" dropdown menu in the Build Inspector). The Move Action has the option not to have this acceleration/deceleration.

  • When scrolling through IPhoto, others photos displayed?

    Recently I had a number of problems where I had to get a new hard drive and restore everything.
    The hard drive was replaced after I brough my MacBook Pro to Apple regarding a problem with my slideshows.  The music, and sometime the pictures, were skipping and/or pausing for various lengths.  I had tried repair data without success.
    The tech felt the hard drive was having problems so it was replaced.
    After a full restore the slideshows were a little better in that only the music skipped or paused.  I checks the music source and it was all fine.
    So we went back to Apply and our only choice was a Rebuild Database (was reluctant to do this because I thought I might loose all me projects like slideshows and albums.)  Well, the Rebuild worked and the slideshows seem fine.
    However, now whenever I scroll through pictures, photos from everywhere show up for a split second before changing to the correct photos.  In slideshows the stream of photos accross the top are all random from the IPhoto data base.  When I select one of them, the correct photo is displayed.
    It doesn't seem to affect the slideshow but makes it difficult when editing.
    Any ideas?   I am using IPhoto 11 p.3.2 and I have installed the latest update.

    I have tried, several times, to rebuild my thumbnails.  However. after progressing to a little over half way I keep getting the following message:
    The volume for “DSC_3556.JPG” cannot be found.
    Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.
    With the options -  CANCEL            FIND PHOTO     TRY AGAIN
    Find Photo does not give me any possibilities and Try Again doesn't work.  So I keep hitting cancel.  Each time I hit Cancel and a new "Volume for..."  comes up.   I have spent hours hitting Cancel and although the Progress Bar moves a bit, it never ends and usually crashes.
    I try again and it appears that the same volume I cancelled the first and second tries appear again.
    I also noticed that every time I open an event there is a mish mash of pictures with only a few that belong there.  Howver, when I click on them, the right photo appears.
    This is a real mess.

  • Scrolling through font list in character palette

    Hi. In AI CS4. XP
    I thought after having the newest version of Illustrator I would be able to have a text box selected & scroll through the font list to see the different fonts change on the text using the arrow up/down keys.
    I seem to only be able to scroll through 2-3 fonts & then it stops, which is very frustrating because I am so used to doing it in ID & PS.
    Anyone know what I can do? Picking each font one by one is time consuming. How American that sounds. Great.
    Thanks.

    http://kb2.adobe.com/cps/407/kb407377.html
    http://forums.adobe.com/message/1873054
    http://forums.adobe.com/message/1978127
    http://forums.adobe.com/message/1271274

  • Tracks jump part way through both in itunes and ipod

    I have an itunes library, version 7.1.1 (5), that is almost 100Gb in size. Most of the cds I imported over the past 2 years and have never had a problem until recently.
    Tracks have started jumping to the next track part way through both in itunes and on my new ipod. These tracks used to play with no problem so it has nothing to do with the actual cd import but something that has happened since.
    The library is stored on an external LACE drive and they have always been there since import.
    It doesn't happen to all tracks but happens very freqently. It is very frustrating and I'd appreciate any advice please.
    Regards,
    Mike

    I'm curious to find if you've resolved this issue. I have the same problem with my ipod and itunes as well, and have had a hard time finding any support on this issue. Certain songs in itunes and on my ipod either won't play or skip to the next song after about 15 seconds.
    I've seen recommendations for people who are having this issue on their ipods, but their songs in itunes seem to be working okay. Several of my songs (purchased and imported) skip on my computer and on my ipod.

  • ITunes 9 no longer syncs photos to ipod touch

    has anyone seen this? after "upgrading" to iTunes 9, the photo tab works fine, you can select photo folders to copy to the iPod touch, but when you sync it doesn't actually copy any photos to the iPod. Help!

    ok this is really weird. what i have discovered is that iTunes thinks that no matter how many photos are in a folder, that there are only 41 photos in it. any folder i choose in itunes to sync photos from, it says "41". even if there are 101 photos in the folder, itunes thinks that there are 41. why would it do that? any body have a clue? this is driving me nuts! i have deleted itunes, deleted every last file associated with itunes including everything i could find in the registry, re installed and it STILL does it? where is it getting that info from? i am about ready to wipe my machine and start over from scratch but there must be a reason it is doing this. any suggestions??

  • Why can't I scroll through my list of songs in my phone

    When I opened the latest version of iTunes and plugged my iPhone 4 up to the macbook, I clicked on 'my phone' (on the left-hand side) and then went to music.  I had gotten a message when I was trying to snyc that there was not enough free memory to sync so my goal was to eliminate some music off my device so that I could.  when I went to the music tab on my phone, not on the left hand side in my library, it pulled up the many windows (i.e. catagory, group, album, etc.) as it has for the last several updates.  The problem I had was that I could NOT scroll though any of those windows to check on un-check groups or albums, etc.  First I had a problem with the 'disappearing' scroll bar(s) just navigating through the music screen because they kepy disappearing and wouldn't come back unless I stretched the entire window....only then would the scroll bar(s) show up so I could see all the windows.  Then, once I got to where I wanted to go (say albums) there was no way for me to scroll down through said albums to check or uncheck songs.
    Having said that, how am I supposed to put music on or take it off my iPhone4?

    when you say earpiece, do you mean the reciever on the phone used during a normal call?

  • I need help with photos and iPod

    I put a bunch of my pictures on my iPod to view them. They were saved onto an external harddrive, which is now dead. How can I get the pictures from my iPod back onto my computer?
      Windows XP  

    Is there a program thats free? Im fine with this one
    if now, its just I have a ton to get back and the 25
    per day is kind of low.
    That's the only one I know of. You might want to try searching on Google or a similar search engine.
    evangosensgo,
    No, I don't work for Apple
    btabz

  • 10.8 Finder no longer lists Today and Yesterday

    I just upgraded to 10.8    Two very useful features of 10.6 Finder have gone:
    (1) the list of files created/modified  Today - Yesterday - Last Week    .... how can I get that back?
    (2) the ability to search for a name-string within filenames ONLY i.e. I do NOT want an enormous list of files CONTAINING the string, just those files with the string within the filename.    How can I get this filename-search feature back?

    You can create a new smart folder which will appear in the sidebar and choose last date opened or last day modified or date created.Also you can choose the kind of file and include all your files in the mac or  also the ones you have in icloud.
    is lot to choose there...
    The folders today etc isn't there for default like in Lion but in Mountain Lion you can create smart folders and is like almost the same.
    Hope it help.
    Here is a few screenshots to help you .. I am sure you know it ..

  • Ipod Photo and Ipod dock

    I have a question:Does the Ipod Dock only work with Mac Computers? I want to get one but not sure if it will work with windows XP SP2. Can somebody help me out.

    yes, it works, but it's not a perfect mechanical fit as the 5th gen is slimmer than the 3rd gen

  • Ipad2 keeps scrolling through apps, safari etc and I cant stop it. What do I do?

    I have restored it, and its still doing it.

    The Restore should have embraced a Reset but try it again [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!

Maybe you are looking for