SCROLLABLE TEXT PROB;EM NOT WORKING

I am having problems with the scrollable text. I placed a big jpeg image. I want to create a scrollable text on that so I made a layer for that. Even I went to paste and board through preference pannel and changed to 1024pixels for the horizontal version. Now I put the text on the past board and with the same name I also created a layer of Caontainer wher I made a box on Indseign active board and put this layer where I created the frame with the same name. Now when I save and go to the preview folio my scrollable text does not work.
Do I have to do some thing in overlays or any thing in In Design

To answer to your first two questions: If I'm understanding you, you are correct. The 7 page magazine would have to all be in the same folio in the Folio Builder. Creating a new folio in the Folio Builder would create another project.
To import multiple articles, each InDesign file should be in its own folder. Those folders should then all be in one folder called simply called "folio" (when naming files and folders, the simpler the better).
I don't know what you mean by TOC images.
It sounds like you need to do some research and read up on the basics.
This website has some very good information: https://helpx.adobe.com/digital-publishing-suite/topics.html
I hope this helps.

Similar Messages

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

For Acrobat 9. TouchUp Text tool does not work.

Acrobat 9. TouchUp text tool does not work --- even on documents created with my computer using installed fonts. Problem 2: when trying to export to Word 2010 there is no option for format .dox, only .doc which belonged to earlier versions of Word.

Hi Begin,
I have the same issue, I am not sure which version so I had on my old computer but when I got a new windows 7 64bit, and asked IT to install Adobe, my life turned upside down. now they asked if I need X or 9pro and I though 9pro is the latest and greatest.. they installed the standard first then could not edit then asked for the pro and could not edit ... now I search and maybe version X will edit but if the document is signed and we do need to do lots of editing after the signature then what is the solution??
I hope the Guru in Adobe can help here soon please :-)!!
Joseph

Text to speech not working with characters such as quotes? Any ideas

text to speech not working with characters such as quotes? Any ideas

Hi linz-kirby
I posted this (link) https://discussions.apple.com/message/27015600?ac_cid=op123456#27015600

My iphone text tone is not working when I plug in the earphone.

Hi,
My iphone text tone is not working when I plug in the earphone.
My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfer to the earphone speaker.
As the earphone is plug into the iphone and I am not putting it on always, I need it to still hear the text tone whenever I received new messages.
Anyone pls help.. the problem still there even I updated..

goh steven wrote:
hi wjosten
I don't put the iphone in my front pocket. I put in my bag pack so vibration is not useful to me. Pls help
The iPhone is working exactly as it is designed.
Your options are:
1) Unplug the headset.
2) Leave the headset plugged in and the earpiece in your ear at all times.
3) Turn on vibrate and put the phone in your pocket.
4) Leave feedback for Apple and hope they deem it worthy of their time to fix.
This is a user to user forum, these are the only solutions we can offer you here.

Probe is not working for class with variable refnum

I have a class whose purpose is to send data through a network stream. Its private data consists of an array of typedef clusters and a single variable refnum of the network stream writer. If I try to probe a wire whose data type is this class, it simply states "No Debug Info" and displays the private data grayed out without any data in it. The probes do not work in member VIs or non-member VIs. But if I remove the variable refnum, then the probe works fine and I can see the array of typedefs. If I unbundle the class and probe the array and refnum then the probes display the data correctly.
Why is the variable refnum in the private data breaking the class's probe? Is there a workaround other than unbundling and probing?

Hello Arthur,
Would you be able to attach the simplest version of a program that has this probe issue? This will help me troubleshoot a lot better.
Ben D.
Applications Engineer
National Instruments

Scrollable frames. Buttons not working.

Hello.
I have a problem with buttons in the scrollable frames.
I have a slideshow with a thumb's. Each thumb consist of MSO (non active icon and active icon) and clear frame - button to that MSO and to slide foto. The thumb's grouped and placed into the frame with horizontal scroll overlay effect.
That frame placed into another frame-pull out tab, which have vertical scroll effect. And when I pressed the button, slide fotos changes correctly, but button MSO not working.
See files from dropbox -- https://www.dropbox.com/sh/rsbf1jto3a39jug/IVcQxaYJOW
Sorry for my english. I need help very much.
Thanks.

Hi,
I understand that I can use two 'states' of the buttons. And I tried it. But. Buttons renditions are raster images. And on the retina display we had bad quality. My target was to create vector buttons. With good quality on both displays.
Any suggestions?
04.10.2013, в 12:03, Christophe_Quinzoni <[email protected]> написал(а):
Re: Scrollable frames. Buttons not working.
created by Christophe_Quinzoni in Digital Publishing Suite - View the full discussion
Hi (again),
It seems that you built your stuff in a very complicated way.
First, try to make simple!
You mixed MSO and buttons functions. Useless and unfonctional.
Yous should use only button panel, with two different 'states' ('Normal' and 'Clic').
See below (no MSO function used at all for the button):
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468602/445-605/Button_ 1.jpg http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468603/448-605/Button_ 2.jpg
Use the layer panel to easily select the objects you want to modify.
Please find your file here: https://dl.dropboxusercontent.com/u/46115208/slideshowButton.indd
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5735625#5735625
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5735625#5735625
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5735625#5735625. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

Text replacement does not work in Safari

Text replacement does not work in Safari forms etc. Is it me or a bug?

Interesting… I have eee set to auto-correct to an email address.
if I type a few words and then add eee it works. But if I just enter eee in the email address of a form it does not.

My text animations are not working.

My text animations are not working. I highlight my text, go to animations and it won't even let me
apply an animation. the apply button is not clickable. How do I fix this?

tevelp
What version of Premiere Elements and on what computer operating system is it running?
It is most likely that you are trying to apply the text animations to more than one line of text.
You can apply text animation to more than one line of text in the project's Titler but it takes special considerations.
Please review the how to details in the following.
http://atr935.blogspot.com/2013/07/pe-titler-part-1-text-animations.html
Please review and consider. Any questions or need clarification on the how to, please do not hesitate to ask.
We will be watching for your reply and will get your text animation in the project's Titler working for you.
ATR

TS2755 My text tone is not working, just vibration is working, please help me.

My text tone is not working, it's just vibrating. Not on mute, and turned off the phone to reset. What can I do?

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414

Text Entry Box not working right??

This is strange…. If anyone has any thoughts…
that would be great.
I have a slide that tests someone's knowledge for inputting
into a text entry box. I want to give them 2 tries for doing this
task - and if they don't perform the task correctly, I want an
error message to display. However, I want the error message to be
different based on the 1st time that they try and the second time.
The method to accomplish this.. I have done many times, and has
always worked. However, for some reason, it's not working this
time.
In order to customize the error message based on whether it's
the 1st try or the second - I have created 2 text entry boxes.
The first text entry box is set to display at 0 seconds, is
set to display for 2 seconds and is set to pause after 1.5 seconds.
If the user enters a successful text entry the user will be
navigated to the next slide, if the user enters an incorrect text
entry they will continue on the same slide and a failure caption is
selected to display (this is the first error message that displays
for the first try.)
The second text entry box is set to display at 2 seconds, is
set to display for 2 seconds and is set to pause after 1.5 seconds.
If the user enters a successful text entry the user will be
navigated to the next slide, if the user enters an incorrect text
entry they will continue on the same slide. No failure caption is
selected to display. This is the important point... I have not
selected for a failure caption to display for this text entry box.
I have a text caption that displays at 4 seconds - this is
the second error message that the user will see if they input an
incorrect text entry into the second text entry box.
Everything seems to work fine except... for some reason, when
I enter an incorrect text entry into the second text entry box, I
get the failure message that I set for the first text entry box.???
Very strange. I have recreated this 3 times - each time it works.
Then, all of a sudden, it stops working. I’ve even tried
recreating the movie from scratch… but same results.
Any thoughts?
Thanks,
Lynn

Hi again
Okay, makes sense. I suppose in this case, I'd simply use
another slide. From what you have explained, it would appear there
is a possible issue Captivate is having with multiple text entry
boxes on the same slide.
So I would insert a slide following the existing slide. Then
on failure of the first text entry box, direct to the next slide.
On success of the first text entry box, skip over the new slide to
the proper "continue" slide.
Hopefully that makes sense... Rick

Full-Text search is not working with PDF files - SQL Server 2012 64 bit

Hi,
We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
Server/DB Level Settings:
1)
Enable FileStream
2)
Install Full-Text
then restart
3)
Use [specific db]
alter
database [db name]
add
filegroup Files
contains filestream;
alter
database [db name]
add
file (
name = N'Files',
filename =
N'D:\SQL\DATA') to
filegroup [Files];
3)
Database level
Settings:
FileStream:
FileStream
Directory name:
[Set the name]
FileStream
non-transacted
Access: [set Appropriate]
3a)
Add a
datafile to DB
with filestreamdata
filetype.
4)
Share D:\SQL\DATA
directory and
add specific accounts
with read/write
access
5)
Give bulkadmin
access to those
specific accounts
at server
level
6)
From the
page (link)
download and
install the *.pdf
IFilter for
FTS. Link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
7)
To the
PATH global system
variable add
path to the
catalog,
where you installed
the plugin.
Default for
this version is:
C:\Program
Files\Adobe\Adobe
PDF iFilter 9
for 64-bit
platforms\bin
8)
From the
page (link)
download a
FilterPackx64.exe
and install
it. Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
9)
Now from
SSMS execute the following
procedures:
-sp_fulltext_service
'load_os_resources',1
-sp_fulltext_service
'verify_signature', 0
EXEC
sp_fulltext_service
'update_languages';
-- update language list
EXEC
sp_fulltext_service
'restart_all_fdhosts';
-- restart daemon
reconfigure
with override;
10)
Restart the
server
11)
select document_type,
path from
sys.fulltext_document_types
where document_type
= '.pdf'
-select
document_type,
path from sys.fulltext_document_types
where document_type
= '.docx'
12) Results are OK.
Following is my Table /Index/ catalog script:
CREATE
TABLE dbo.DocumentFilesTest
DocumentId INT
IDENTITY(1,1)
NOT NULL
PRIMARY KEY,
AddDate datetime
NOT NULL,
Name nvarchar(50)
NOT NULL,
Extension nvarchar(10)
NOT NULL,
Description nvarchar(1000)
NULL,
FileStream_Id UNIQUEIDENTIFIER
ROWGUIDCOL NOT
NULL UNIQUE DEFAULT
NEWSEQUENTIALID(),
FileSource varbinary(MAX)
FILESTREAM DEFAULT(0x)
go
--Add default add date for document
ALTER
TABLE dbo.DocumentFilesTest
ADD CONSTRAINT
DF_DocumentFilesTest_AddDate
DEFAULT sysdatetime()
FOR AddDate
EXEC
sp_fulltext_database
'enable'
GO
IF
NOT EXISTS
(SELECT
TOP 1 1 FROM sys.fulltext_catalogs
WHERE name
= 'Ducuments_Catalog_test')
BEGIN
EXEC sp_fulltext_catalog
'Ducuments_Catalog_test',
'create',
'D:\SQL\PDFBlob';
END
--EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
DECLARE
@indexName nvarchar(255)
= (SELECT
Top 1 i.Name
from sys.indexes
i
Join sys.tables
t on
i.object_id
= t.object_id
WHERE t.Name
= 'DocumentFilesTest'
AND i.type_desc
= 'CLUSTERED')
PRINT @indexName
EXEC
sp_fulltext_table
'DocumentFilesTest',
'create',
'Ducuments_Catalog_test',
@indexName
EXEC
sp_fulltext_column
'DocumentFilesTest',
'FileSource',
'add', 0,
'Extension'
EXEC
sp_fulltext_table
'DocumentFilesTest',
'activate'
EXEC
sp_fulltext_catalog
'Ducuments_Catalog_test',
'start_full'
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
ENABLE
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
SET CHANGE_TRACKING
= AUTO
ALTER
FULLTEXT CATALOG
Ducuments_Catalog_test REBUILD
WITH ACCENT_SENSITIVITY=OFF;
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'pdf'
'BOL12006553.pdf'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\BOL12006553.pdf',
SINGLE_BLOB)
AS BLOB;
GO
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'docx'
'test.docx'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\test.docx',
SINGLE_BLOB)
AS Document;
GO
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'BILL')
Returns nothing. it should come from PDF file
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'TEST')
Returns from word document as follows:
2           2014-06-04 10:11:41.393            test.docx docx
NULL   [BINARY Value] [Binary Value]
Any help is appreciated. Its been a long wait.
Thanks,
Vel
Vel Thavasi

Hello,
Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
The following thread is about similar issue, please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Plain Text URL links not working in the Windows 8 Mail App for only one account.

Hello,
I just started using a Surface Pro, and randomly one of the accounts I have setup in the "Modern" Mail app stopped parsing the pain text URL path that was included in them. Specifically links to forum discussions. I have 4 other Win
8 devices and they display the links fine.
More confusing is this issue happens ONLY with my O365 mail account and only on one PC. I have an Outlook.com account and it renders the pain text URL as a clickable link, but when I send the same email to my O365 account it just shows up as
text, no link generated. All in the same Windows 8 Mail App.
I ran the Windows 8 App Troubleshooter, I've reinstalled the Mail app, I've removed and re-added the mail account. Nothing fixes this. Anyone know why?
Thanks,
Joe

Same problem for us, the link is also not rendered, if the mail is sent to an on-premise Exchange server.
Its only for plain-text messags, HTML-messages work fine.
Why is this problem ignored? The app is useless with that limitation.

Text Link Styles not working in Footer Section

I have a master page with a footer that has three columns of navigation text links inside.
In order to match my design I have created a customer text link style for these links.
However when I preview my site (in muse and browsers) the roll over effect (should show an underline) doesn't work.
I've searched the forums and found that someone else had a similar problem and it was down to them having a paragraph and character style stacked on top of one another. However I have checked this on my links and this is not the case.
NOTE: I have already successfully managed to create a similar style that resides in a side bar navigation panel in some of the sites internal pages and these link styles are working fine.
So, I'm not sure if the file has become corrupt or if I'm missing something that I've done wrong?
One question I have is at which point to you apply the text link style?
1. By clicking on the line of text to select it?
OR
2. By clicking further into the text box; as if you were editing it, then selecting all of the characters in the word you want to make a link. With the word selected, click on the style name in the Character Panel to apply it?
OR
3. as with the above example, once you have selected all of the characters in the word you want to make a link. Click on the Hyperlink drop down arrow (from the main toolbar) and choose the style name you wish to apply, from the drop down box 'Text Link Style'
NOTE:
I'm running version v2.3, Build 50, CL 771675
AIR Runtime: 3.5.0.600
UPDATE:
I couldn't wait any longer, so I just deleted the text boxes and styles and re-created them both and they seem to work now. Lot of additional work though that I'd rather have not had to do.

Sorry, I forgot to say, to see how the email link at the
bottom of the page should look please see www.bethhockley.com
Thanks,
Beth

SCROLLABLE TEXT PROB;EM NOT WORKING

Similar Messages

Maybe you are looking for