Scrollbalken mit DVD Encore

kann man im DVD Encore auch eine Scrollbalken erstellen, wenn z.B. bei einem Menü ein zu langer Text benötigt wird?

Scrollbalken sind auf DVD nicht möglich,
kann von DVD Player nicht verarbeitet werden.
Es ist besser ein zweites Menü über next
Button zu bauen.
MfG Martin

Similar Messages

Erro no DVD ENCORE para exportar e para criar menu.

Pessoal, estou enfrentando um problema vamos lá, antes de tudo, uso o pacote PAGO.
Instalei o premiere CS6 para ter o DVD encore, usei o encore e até ai tudo ótimo, ai fechei um menu, até ai perfeito...
observei que tinha um erro de Português no menu e decidi modificar, abri o programa, fiz a mudança e quando fui fechar ele me aparece dando essa mensagem de erro...
Tento abrir um novo projeto e da outro erro:
ja desinstalei e instalei tirando até as preferências, continua dando os dois erros.
Quando abro o projeto que ja conseguir fazer (o único), ele abre mas na hora de fechar em IMAGEM ou m qualquer outro formato que o programa me oferece como fiz anteriormente ele da o erro da primeira foto, o programa não me sugere solução nem nada, alguém pode me ajudar?????????

Bom dia Cristina,
Isto mesmo, preencha o valor dummy XX00000000 na empresa através da OBCL.
Fonte: System error: Default TXJCD is not filled in the table T001
Atenciosamente, Fernando Da Ró

DVD Encore subtitles

I built a rather complex project with DVD Encore v-2.0. Three languages - English-German -Hebrew. I use FAB script oriented subtitles (pictures) The whole project is appr. 3 hours.
When I try to either make a folder or imagefiles the programme says: "creating subtitles failed ..." or "Out of memory" . In other words all my work (took me about a week) is in vain. I phoned Adobe Technical Support, but nobody seems to understand what the problem is or they denie that it exists att all!!!!
Please is there anybody who can solve my problem.
Best regards,
Janjens Molenaar, Blaricum, Holland

Have you tried to compile the project without any subtitles? Have you tried with English, then German, then Hebrew to see if it's just one particular language that is not being accepted?
I've been working on a series of music DVDs over the last 6 months that are fairly subtitle intensive. I'm using 3 languages (English, Spanish, and Italian) with 2 copies of each subtitle (one at 100% from the top and one at 0% from the top) to give the user the choice of where they want to view the words.
I'm using a 32 pt Arial regular font for all languages and haven't had any difficulties since I started creating my STs in Lemony Subtitler. I export them in Encore 1.01 text format and they import perfectly into Encore 2.0.
When I first started trying to create STs within Encore, I got a lot of out or memory type errors and save project now errors, which is very unusual for my machine. I suspect these errors occurred as the result of constant back and forth tweaking of each ST segment to make sure it lines up properly with the music. Apparantly, Encore doesn't like all that stopping and starting and moving STs up and back on the timeline. I never lost anything, but it scared me enough (I know how long it takes to create accurate subtitles) to buy a good subtitler like Lemony.
Since then, all has been fine, not to mention that I can very easily store txt versions of all my subtitles from Lemony for later editing. Encore doesn't save subtitles in this way since it automatically converts them to graphics.
Peace, BJ

Having tbl making dvd-encore cs4,win 7,64bit

looked on forum for win 7 encore cs4 Win 7 troubles and found 2, turn off power saver and download some Roxie file. Did both but still freezes, not responding and have to end session, one at 12 min left, and now 2 min left. Also can't eject dvd, have to turn off computer. This is a SD dvd, 90 mins total time, the 1st encore project with new i7 computer, --last night it did burn it but the last 10 mins weren't there. Transcode is automatic. Any ideas--I'll see if I can work on this project in my XP computer, never had any tbl with XP....

Thanks for the reply, I will look into your ideas. I don't have screen saver on and no Nero, iTunes was downloaded with Quicktime and I beleive Win7 uses Roxio, I will check these out.
I put the hard drive docking station back on the XP windows quad core computer, the project was edited on this machine.
Encore burned the dvd complete EXCEPT now no sound, only the menu sound. When I play the timeline there's no sound. This seems to happen when I make a change in PPRO and then go back to Encore. I then export the audio from PPRO and bring it into Encore as an asset, drop it on audio 2 and then all is fine. I did that just now and still hear no audio. I've been using Encore for a year and no troubles. Glad I make the SD dvds 1st before the HD so I don't waste blu ray discs.
My win7 computer is a Dell with Win7 Ultimate, 12 GB ram, i7 920 processor, 1TB C drive and I use external drives to edit on in a docking bay with esata cable.

Burnning dual layer dvd Encore CS5.5 errors out.

Here is the greatest error I have ever seen.
I got to burn a dual layer dvd transcoded from AVCHD 1080i with fallowing settings.
Edited footage in PPro and send to Encore via Dynamic link, created dvd project using Mpeg2 with 9mbps, Dolby 192 for Audio.
File size to be burned on dvd is 5.67gb, aprox 1 hour 10 min transcoded with 9mbps, 720x40 wide screen, audio is 192kbps Dolby.
There are three menus one is main and tow sceen selection menus, noting fancy everything as default. menus linked as usual nothing fancy and and it is very basic.
All assets, that used for motion menus and main video is transcoded fine, but when it gets to put dvd together I get this error
Encore starts organizing videos for disk and after that it gets to this above and thats it. Press ok Build progress box gives fail message and option to Ok it. After pressing Ok button this box goes away to build panel.
I have tried to change an Automatic layer break to manual still get the same error, I have tried a custom layer break and still get the same error again, I have tried dvd, and an image, and folder for dvd, still the same error there to. I have redone project from scratch and still got the same result.
However previously I have burned many Dual layer dvds using the same method described, and same settings described, and never had this problem.
Nothing on the PS was changed except the updates installed regularly.
Anybody have any Idea what is this all about? Because I just burned 16 Blu Ray discs, and 16 Dual layer discs on one of the project, and next one a day latter this happens.

I'm having the same problem. not once did it, the encore was automatically break in the case of dual layer dvd. now he does not. I mark the box DUAL LAYER 8.54gb, do DVD disc or image or folder, or change the marking of the layer break from automatic tomanual, and it does not. in the end he always gives the message: duallayer requerid.
wanted to know how to do this manually break, because even in the manual or here on the website of adobe, has no suchinformation. does not show clearly how to manually break. please if someone can give a help, thank you.

DVD Encore 2.0 my first thoughts

Having completed my first major project in Encore 2.0 I thought I would share some of my experiences. My project was basically a family album DVD I had been meaning to do for years. The content for this DVD consisted of
About 350 scanned photographs
About 200 digital photographs
Video Footage taken on a MiniDV camcorder
Motion Menus with Audio sound track
There are about 30 menus in the project mainly because there is a family tree and each person has their own menu, and there are sub menus for weddings etc.
b Thoughts having built the project:
Apart from one time, when I was having major problems with the UI taking forever to respond, I have really enjoyed using Encore 2.0 which came as part of my recently purchased production studio.
I like the UI and the ability to use a flowchart to define the flow of content. I also like the ability to tailor existing menus or design new ones in Photoshop.
My only negative thought about Encore 2.0 is the way it handles assets when the application regains focus. In short, if you are (for example) editing a menu in Photoshop and then return to Encore it enumerates all of its assets again. If you have, as in this project, 500+ stills this is just a no no. So my work around this was to create a mpg slide show in another application and import this as a single asset into Encore. The only downside of this is that you loose the ability to have file names as subtitles. But given that, by adopting this approach, the UI delays reduce to a very acceptable level, I think the benefits far out way the drawback.
b One major advantage of handing stills in this way is that disk rendering time is reduced from 3 hours to 5 minutes a definite improvement :)
In short I like it and if anyone has the production studio premium and hasnt yet played with Encore I would recommend they give it a try
Dave

Avoid the use of WMA files at all costs.
These are not DVD compliant, and will therefore need to be transcoded.
If they are already compressed you will be recompressing an already heavily compressed file and it will sound dreadful.
PCM (or WAV) is far superior - it is uncompressed. However, the bitrate is larger by a significant degree, and will rapidly eat into your video space.
If the video duration is not too long ( under 1 hour), and the project is a single layer disc, this is not an issue.
For longer running times though, allow Encore to turn the WAV file into a Dolby Digital file instead - the drop in quality is barely perceptible to 99% of users.
Make sure the source is at 16/48 resolution - avoid using 44.1KHz files as they will have to be padded with zeroes. It will not degrade the sound, but it will not help matters either.
Stills.
There is absolutely no point at all using any other resolution over 720x480 for NTSC, and 720x576 for PAL.
If you can, you should set the PAR in CS2 - there are even nice, helpful presets for you.

Can't Burn DVD:Encore Error code 5A803

I'm working with the CS3 suite and whenever I try to burn a DVD the following message comes up: Hardware error sense code 5A803. Pleae contact harware manufacturer.
I'm working with a Pioneer DVD burner, I was able to import an ISO file and burn that to DVD using Nero but every effort to burn from Premiere via Encore brings up the 5A803 error message.
Help, please send help!
Thanks,
Flip

Flip.
Firstly, please don't make multiple posts on the same problem. Once is enough.
Secondly, I strongly suspect that your Nero installation is the cause of the problem. Did you allow it to install the Packet Writing utility? If so, please see the FAQ for details on how to avoid this issue in future.
http://www.adobeforums.com/webx/.3bbe7ec0

Sense Code Error 31000 while burning DL DVD Encore CS5 Macbook Pro

While attempting to burn a Dual Layer DVD on my Macbook Pro I got this error: "Sense Code 31000" just before it started to burn.
I changed the burn speed, verified my laptop burns DVD+R DL discs. Any help is much appreciated. Must burn a master to duplicated 100 dvds by Friday. Thanks!

Hi,
Sense Code errors are hardware or blank media related.
Try to burn with other blank disc, if it does not work then the problem may be because of burner.
Thanks,
Pankaj Gauba

Como meter musica al menu en dvd encore

Hola a todos, ya tengo mi proyecto hecho y funciona
perfectamente. Pero ahora quiero que mientras esté el
menú en pantalla, suene música de fondo. Como puedo hacer
eso? Muchas gracias de antemano.

A mi me paso algo similar que me enviaba a internet a una pagina que nunca abre, desistale el Adobe premier y el encore y los volvi a instalar y eso me solvento el problema, por supuesto tambie desistale la tarjeta capturadora.
suerte

Auflösung von Fotos mit Encore DVD

Hallo,
ich möchte gerne mit meinem Encore DVD auch eine Hochauflösende Foto-DVD erstellen. Leider stehen bei den Projekteinstellungen nur PAL oder NTSC auflösungen zu Verfügung.
Gibt es denn eine FOTO-Slide-Show für HDTV mit Encore zu erstellen? Kostengünstigere Programme (z.B. von Magix) bieten Auflösungen von bis zu 3500px/h an. Warum dann auch nicht Adobe?
Danke für jede Hilfe,
Tom.

Hi,
dann mach den dicht und den Bildschirmschoner und das....
alles was im Hintergrund lüft könnte stören.
Gruß Jörg

Maximale Qualität auf DVD mit Encore CS3?

Ich brenne direkt aus dem Schnittprogramm CS3 mit Adobe Encore auf DVD. Doch der volle Speicherplatz der DVD 4,7 GB wird trotz maximaler Einstellungen in Encore nicht ausgenutzt.
Einstellungen: Widescreen, CBR Qualität 5 und 5 MBit/s, Anzeige Speichermenge: 4,5 GB. Auf der gebrannten DVD bleibt aber ca. ein Viertel Speicherplatz frei.
Bei einer höheren Qualitätseinstellung in Encore, z.B. 5,3 MBit/s - kommt die Meldung Speicherplatz überschritten, brennen nicht möglich. Tatsächlich stimmt das aber nicht.
Wie kann ich mit Encore CS3 den Speicherplatz einer DVD voll ausnutzen?
Bei Double Layer tritt das gleiche Probleme auf.
Für Rat bin ich dankbar.
Gerhard

Hast du mal darauf geachtet, welche Frequenz du hast 44,1 oder 47 kHz? Da kann der Ton schon mal weg sein. Da gibt es unterschiedliche Standards für VideoDVD und TonCD.

DVD mit encore Cs3.1 spielt keinen Ton ab

allo
ich arbeite schon seit jahren mit Encore und habe jtzt das problem das ich an einem DVD Spieler für den ich die DVD erstellt habe nur ton im menü aber nicht in den einzelnen Filmen habe. Am PC läuft die DVD wuderbar, an meine DVD Spieler auch. KAnn es sein das dieser besagte DVD Spieler einfach ein Kompatibilitätsproblem hat? Ich habe allerdings noch nie geshen das nur der ton nicht geht sondern wenn es probleme gab wegen diverser Rohlinge dann wurden die nicht gefressen bzw die wiedergabe unterbrochen?
P.S: das Problem tritt mit allen Rohlingen auf die ich verwendet habe und auch schon mit DVDs die in Encore 2.0 erstellt wuren. Rohlinge waren Verbatim, DVD Spieler ist ein alter Harman Kardon
Vielen Dank für eure hilfe

Hast du mal darauf geachtet, welche Frequenz du hast 44,1 oder 47 kHz? Da kann der Ton schon mal weg sein. Da gibt es unterschiedliche Standards für VideoDVD und TonCD.

Adobe Encore DVD 1.5 - Endaktion+RemoteMenü

Hallo,
ich habe mal unter Disc das Projekt geprüft und da steht,
Remote-Menü ist nicht festgelegt,genauso die Endaktion. Vor allem bei den Schnittfenstern.
Was ist das?
info: Ich habe mehrere Schnittfenster.
a) Schnittfenster wo ein Film drinn ist der ohne Kapitel durchgängig von der DVD abgespielt wird.
b) einen ganzen Film in einem Schnitfenster, mit Kapiteln. Das heißt, auf der einen Menü-Seite greift der Button 'Film starten' aus dem Hauptmenü auf dieses Schnittfenster zu, und es greifen auch die Szenenwahlbuttons im Menü zur Szenenwahl auf dieses Schnittfenster zu.
Also hier meine Fragen:
1) Was ist bei einem Schnittfenster die Endaktion, und vor allem die Remote-Menü Einstellung?
2) Wie mache ich das in dem spezielen Fall, das zwei Orte des DVD-Menüs auf dieses Schnittfenster zugreifen?
Vielleicht pro Butten, also das 'Film starten' sein eigenes Schnittfenster bekommt, und auch die Szenenwahl im 'Szenenwahl-Menü' sein eigenes Schnittfenster bekommt?
Weder mit der Encore-Hilfe noch mit nem englischen Wörterbuch kann ich rausfinden, was das bedeutet.
Also, was ist das? ich sehe ja das ich sie einstellen kann, aber habe keine Ahnung wozu sie dient.
Liebe Grüße

Dankeschön!
Das mit der Endaktion eines Schnittfensters hab ich jetzt verstanden.
Wenn ich dich richtig verstehe, stelle ich doch bei Remote-Menü ein, was passiert, wenn ich auf meiner Fernbedienung 'Menü' drücke.
Allerdings kann ich doch jedem Schnittfenster eine Remote-Menü Einstellung zuordnen, ich verstehe das nicht so Ganz.
Kann es mir nur so vorstellen:
Wenn ich z.B.: im Menüpunkt 'Outtakes' das Outtake auf der DVD abspiele, und während dem Betrachten die 'Menü-Taste' auf meiner Fernbediehung drücke, lege ich mit der Remote-Menü Einstellung des Schnittfensters, in dem sich das Outtake befindet, fest, in welches Menü ich gelange, wenn ich die Menü-Taste drücke, während ich mir den Outtaklefilm ansehe.
Kann man praktisch sagen:
Die 'Remote-Menü Einstellung', ist die vorzeitige, manuell betätigte, Endaktion durch die Menü-Taste auf der DVD-Fernbedienung.
Richtig?
zu 2.
Wenn 2 Buttons aus jeweils einem Menüfenster auf das gleiche Schnittfenster zugreifen, kann ich ja nur eine Remote-Menü Einstellung vornehmen.
Ich möchte aber, das wenn ich 'Film ab' drücke und mir den Film ansehe, und die 'Menü-Taste' drücke, in das Menü gelangen, von wo ich 'Film ab' auch betätigt habe.
Aber wenn ich ins Szenenmenü gehe und mir es von dort aus ansehe, möchte ich das ich, während ich den Film sehe, mit der 'Menü Taste' ins Szenenmenü gelange.
Das gleiche trifft dann ja auch auf die Endaktion zu.
Dafür brauche ich dann doch 2 Schnittfenster, stimmts?
Liebe Grüße,
Tim

Premiere CC 7.2.2 crashes when trying to export via Media Encoder and Encore crashes while DVD build

Hello,
My computer is a:
2x Intel Xeon Processor E5-2650 (2000 MHz, 20MB);
16x Kingston DIMM 8 GB PC3-8500 ECC Reg.;
PNY Quadro 4000 with 2048 MB GDDR5-RAM;
PNY Tesla C 2075
2x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1x 120 GB OCZ Vertex 3 SSD
1x 240 GB OCZ Vertex 3 SSD (system disk)
Tyan S7050GM4NR motherboard
Windows 7
I freshly installed Windows 7 and the CC-Apps PremierePro, After Effects, Media Encoder, Photoshop and Speedgrade.
When I try to export any video from premiere to the media encoder premiere crashes without any error message. The problem is not the project: I created several new projects and even if I only have one Graphic-File/Bars/h264-video in the timeline that I try to export: premiere crashes. When I export directly from premiere it works, but there is no chance to go via media encoder. The strange thing is that I can export from after effects to the media encoder without any problem...
Second Problem: Encore crashes also. Everytime I try to build a DVD => Encore crashes
Does anybody have an idea?
Here is what I already tried:
Yesterday it worked fine today it crashes when I export from premiere via media encoder.
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. I used Software only renderer => crash
This is the Windows log that I found:
Ereignis-ID 1000
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

Is it possible to burn a SD DVD correctly from an Encore CS6 Blu-ray project and content?

Hi all,
I shot and edited AVCHD 1080i30 (60i) square pixel video from a Sony NXCAM HXR-NX5U camcorder in Premiere CS6. I then exported the 1920x1080 edited mpeg2 blu-ray m2v file for import into Encore Cs6. Burning a blu-ray disc in Encore CS6 from this mpeg2 bluray m2v file is no problem and look great even with the default settings.
However, I also want to burn a standard DVD using the same HD Encore CS6 project without having to go back to Premiere CS6 and output a 710x480 mpeg-dvd file. I thought i could simply select the dvd format under the build tab in Encore thinking Encore would handle all the necessary conversions to burn a 720x480 DVD but the menus look jaggy and the video does not play smoothly.
Is it possible to burn a standard DVD correctly from an Encore CS6 HD project and content, or is it better to have Premiere CS6 output a 720x480 mpeg-dvd file and create a new standard 720x480 dvd Encore project instead?
Acording to Encore Help, it says "You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format.", but i'm not convinced Encore is doing things correctly.
Thanks.

Jim,
I tried a variation on your suggestion.
I exported a new m2v file using the mpeg-dvd from Premiere CS6 as you suggested with "Use Maximum Render Quality" checked to get better scaling from HD to SD. I imported it into my Blu-ray EncoreCS6 project by using the "Replace Asset" option and changed the "Project Settings" authoring Mode to "DVD" leaving the HD menu's "Aspect Ratio" at 16:9. I then built the disc using the "Build" tab DVD format and output settings.
It worked!
The jaggies are gone (except for some motion jaggies) and the DVD plays well.
I suppose I could have done something similar within Encore but I'll test that some other time.

Scrollbalken mit DVD Encore

Similar Messages

Maybe you are looking for