Scrollbar (barre verticale et horizontale) a disparu

Les barres verticales et horizontales qui permettent de faire monter et descendre l'image dans espace de travail a disparu. J'ai réinitialisé l'espace de travail, puis désinstallere et réinstaller Photoshop C6, mais rien n'y fait, ces 2 barres sont toujours manquantes. Pouvez-vous m'aider svp ? Je suis sur Mac.

Similar Messages

JPEG Verticals NEF Horizontals

Recently, as I was loading images shot on my Nikon D70s, I noticed that my vertical images were loading as JPEG and my horizontals were loading as NEF.
Subsequent to that, I noticed that as I ran my cursor over my images in Bridge that the creator on my verticals is Quicktime and my horizontals are listed as ver 1.00.
My camera is set to shoot RAW, I have downloaded the latest version of Camera RAW. I am using Photoshop CS2 on a MacBook Pro running OSX 4.
Any thoughts?

Operating System is OSX 10.4.6 Tiger. I did have Nikon software installed at the time I loaded my images, however, I had loaded images without any problem previously. I have since taken the Nikon software off--although the advice I got from Nikon was to load into the camera software. When I load images iPhoto automatically opens. Could this be an issue?
I did try right clicking to no avail.
I have also downloaded Photoshop CS3. This will at least allow me to open Camera Raw for those blasted JPEG files, but the mystery still remains....

Problème avec la barre de navigation qui a disparue

Bonjour,
La barre de navigation a disparue et je n'arrive pas à la remettre

In Firefox 3.6 on Windows you can hide the menu bar via "View > Toolbars" or via the right click context menu on a toolbar.
Press and hold the Alt key down to bring up the menu bar.
Go to "View > Toolbars" or right-click the menu bar or press Alt+V T to select which toolbars to show or hide.
See also [[Menu bar is missing]]
If you do not have the en-US locale then the shortcut keys may differ, but pressing the Alt key should bring up the menu bar.
Pour apparaitre la barre de menus, appuie sur la touche Alt+A et T (Affichage > Barres d'outils)
Alt+A > T > N : Barre de navigation

Pourquoi je ne peux pas réduire l'épaisseur de lignes horizontales ou verticales ?

Bonjour,
Je suis relativement novice avec illustrator et depuis quelques jours, je n'arrive plus à modifier l'épaisseur des lignes horizontales ou verticales lorsque je les crée. Elles apparaissent automatiquement avec l'épaisseur 1pt et je ne peux pas réduire cette épaisseur. Je ne sais pas si j'ai modifié quelque chose dans les réglages ou dans les paramètres et je ne sais surtout pas où chercher...
Lors que je crée des lignes penchées ou d'autres objets, je peux sans problème modifier l'épaisseur du contour, mais pas pour les lignes verticales ou horizontales...

asdemieville,
In cases like this, the first guess is Align to Pixel Grid
You may select everything and then untick Align to Pixel Grid in the Transform pallete, and also untick Align New Objects to Pixel Grid in the flyout options.
You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

Unable to move scrollbar due to forms bug

We use Headstart for Designer 6.i.
I have spreadtable in the form with verticall an horizontall scrollbars.
In PRE-FORM trigger I used procedure qms$config.set_spreadtables_resizable('TRUE').
In the running form when the window is resized the error message is displayed:
'Unable to move scrollbar due to forms bug' and verticall scrollbar is lost.
But in Headstart demo this utility works OK. I can't find solution for this problem in oracle Helpdesk.
Thanks for reply.

Martina,
There is a bug in forms that won't allow you to change the 'x-pos' of a scrollbar to a value bigger than the width defined for the canvas at design time. So, if you stretch the canvas and set the 'x-pos' to a bigger value, you get a runtime error from designer. If you look in the Headstart User Guide under re-sizable spreadtables, you will see that we recommend that you put the vertical scrollbar on the left side of the screen instead of on the right side when using a resizable spread-table. That's what we did in the demo application.
Regards,
Lauri

LINE OF BUSINESS WISE P&L, BALANCE SHEET .

Dear Sap Gurus,
I in my project, business wants LOB(Line of business) wise P&L accounts and balance sheets,is it any posibility to do the Z report,
We have LOBs like---TTSL,TSKY,VOTAS etc
I any posibilty pls give suggestion
It si very urgent.
Thanks
Sai

Looks to me like you have what can best be termed as "verticals and horizontals" in your business!
Of course, standard SAP can take care of one type of classification in your Business (either Vertical OR Horizontal) but not both.
But as long as you say there is information captured on each line item that tells to which LoB the line item belongs, there is a report possible quite easily that can take care of your requirements.
You say you use Cost Centers synonymous with LoBs. Have you explored the various cost center reports that SAP provides? Alternatively, you cna pick one that comes closest to your requirements, and then start off creating a custom report from that one.
I believe this is the most an "Offsite Consultant" can do for you. You'd be better taking it up from here onwards. Suffice to say - reporting is possible as long as data is captured properly as per some predefined rules.
Remember to assign points if found useful.
Regards,
Gulshan

So Can I determine the business partners linked to user based on the assigned role and org. structure?

Hello, I am working on a SAP CRM 7 Sales implementation and we are implementing leads and opportunity scenarios. The current business organization model is that there multiple vertical and horizontal departments. This is typical matrix structure. This organization has done the segregation of its clients based on the verticals so every clients belongs to at least one or more Vertical department but Horizontal departments can contact all the clients. In the same way sales executives are also either belonging to one or more Verticals or Horizontal departments? Horizontal sales executive can create leads for any clients available in the system but a Vertical sales executive can only create lead only for the client belongs to his vertical and assigned to him. This can be achieved by creating organization structure and business partner relationship.
Now the problem statement is that few sales executives need work for both some Verticals and Horizontals at the same time. But requirement is that they should be able to do the both roles with single user id but multiple roles. So when sales executive is creating leads his vertical department, he should only be able to select clients assigned to his Vertical only but when he is creating lead for Horizontal department, he should be able to select any clients.
So Can I determine the business partners linked to user based on the assigned role and org. structure?
Please let me know if this is not clear also note we are only using CRM WebUI no SAP ePortal.
Thanks a lot your help in advance.
Regards
Sudesh Sharma

Thanks, Tahir
my problem has solved
Kind Regards,
Faisal

Need help with RequestBean

Hi Friends,
I am quite new of Java Studio Creator and finding trouble with passing parameters using RequestBean.
Scenario:
I have two pages Verticals.jsp & Horizontals.jsp
Verticals.jsp contains a table with data coming from SQL Server with two fields: id & vertical..
I also created a RequestBean Property named verticalId of type integer.
I set the name field as hyperlink.. and wrote this according to tutorial:
public String hyperlink1_action() {
// TODO: Replace with your code
TableRowDataProvider rowData = (TableRowDataProvider)getBean("currentRow");
getRequestBean1().setVerticalId((Integer)rowData.getValue("dbo.Verticals.Id")); <==dbo.Verticals.Id is the table column which i want to store in verticalId
return "horizontals"; <== i dont understand the purpose of this string return
Then in Horizontals.jsp, I have simply set the Title as : "Horizontal Details for #{RequestBean1.verticalId}"
Next, I went to Page Nevigation and tried creating linkage from hyperlink at Verticals.jsp to Horizontals.jsp
However, it created linkage from Verticals.jsp to Horizontals.jsp (and not from hyperlink as specified by tutorial)
Now, I dont see any data getting passed to the second page.
PLEASE HELP ME OUT !!

Hi There,
Its great to know you were able to resolve your issue. Netbeans 6.0 is the latest version of Creator, have you tried it yet?
You can get it from www.netbeans.org.
Also for more details on request beans see http://developers.sun.com/jscreator/learning/tutorials/2/scopes.html
Thanks
K

File open - images display out of sequence

Hi. I am new to this forum so please bear with me.
I installed CS5 a few months back. All was okay except for things being a little slower than I hoped. The only thing I noticed right away was the top tool bar wasn't very clear which I thought most unusual for Photoshop having used numerous previous versions. I noticed that various other operations on my computer were also running slower.
Then a week ago things started to get much worser. Programs (not just CS5) but other things such as email and Internet etc were going very slow or freezing and not responding at all. As long as I didn't start CS5 it was okay. I also noticed that when I opened a folder of JPEG images they were separating into dimensions by default with the verticals first and then the horizontals with each group in their own numerical sequence. I could select display by name and they would go into the correct order. If I opened an image and then went back to open some more they were out of sequence again. This is any folder of JPEGs and only applied to JPEGs. PSD and Nikon RAW files are fine. Also the JPEGs display correctly in other software applications such as My Computer, Lightroom 3 and Capture One.
After much research I have realised that my dual core processor with XP just doesn't have the power to run something as memory intensive as CS5. A massive upgrade is on the agenda but will take a little while to get set up. So, in the meantime I have deinstalled CS5 and reinstalled CS3. It is much improved with nothing freezing or crashing and I am able to do other things while Photoshop runs in the background. However the sequencing problem still exists. I wouldn't mind as it is easy to right click and resequence. But each time I have to go to open a new folder of JPEGs it takes minutes to open (time depends on how many images are in the folder). Once open I can return to that folder and it opens in a reasonable time but still out of sequence. But sometimes they aren't just separated into verticals and horizontals but the images numbers are all over the place. I go to a different file and it is the long wait with the CPU groaning away trying to work.
I am a full time professional photographer and this sort of delay is more than annoying and taking up way too much time - time that I can't afford. Has anyone come across this issue before and is there a solution. Your help would be very much apprciated.
Thanks Carol

Hi Mylenium, Or anyone who ever has this problem.
It turned out it wasn't a Photoshop problem re the JPEGs being out of sequence. It was a setting in Windows XP. The following are the instructions to fix the problem. I have done it and it instantly fixed my problem. Cheers Carol
Apply a Specified View to All Folders
Windows XP allows you to choose how to view the contents of individual folders. By clicking "View" on a folder's menu bar, you can choose to view the folder's contents as thumbnails, tiles, icons, a plain list or a list with details. (Image folders will have an extra view, "Filmstrip").
Changing the view will only apply to the folder you are currently working in. However, with just a few more clicks, you can change the view for all the folders on your computer.
Here's how:
Open any folder, click "View" and choose the view you would most like to use.
Click "Tools" and then click "Folder Options".
In the "Folder Options" window, click the "View" tab.
Click "Apply to All Folders".
A confirmation message should appear. Click "Yes".
Click "OK" to exit the "Folder Options" window.

Enlarging still pictures

I have added some still pictures as a slide show. With some of these old pictures (not digital) I've cropped them to remove people who I did not want in the picture. My picture is now pretty small when I watch my completed video on my TV. Some of the pictures are all the way to right of the TV screen and some to the left. Is there a way I can edit these pictures to be centered and larger with the CS4 pro editing while they are in my timeline?

If you are using PrPro CS4, you are in the wrong forum. PrPro CS4's forum is HERE.
However, for what you want, I would do all image editing in Photoshop, as it offers so very much more control.
Not knowing how you plan on delivering this video, I'll just assume NTSC DVD so we have something to work with for this example. That would be a 720 x 480 pixel Frame Size. In Photoshop, do your Cropping, and finally Scale (Image>Image Size) to about 720 x 480. If you wish to Pan on a Zoomed out image, then go up to 1000 x 750 pixels. I would Save_As PSD from Photoshop.
This will get you material that will come very close to fitting your video's Frame Size. If necessary, you could do one of two things: you could choose to enable Scale to Frame Size, or you could Keyframe the fixed Effect>Motion>Scale, and perhaps Motion>Position if necessary. That is also how one animates still images in video, a la the Ken Burns Effect.
Hope that this helps.
Now, if you have verticals and horizontals, you will be putting these into a horizontal video. This TUTORIAL might give you ideas on how to handle the Aspect Ratio differences.
Good luck,
Hunt

Tethered to Lightroom auto-rotation issue

Hi, I'm using a canon EOS 1D Mark III tethered to Lightroom via EOS utility. When I shoot, at the time of capture/import lighroom doesn't display my vertically shot images as verticals, rather horizontals. I've tried to toggle with the auto-rotate setting in camera (trying all 3 settings) and nothing has changed. What am I doing wrong?

Yes there is...actually after posting this problem, I realized that my issue was that "rotate image" under the "remote shooting" menu in prefs of EOS util was ticked on. It should be ticked off.

Scripting to print 4x6

Many of my photos are cropped to square or panoramic formats. When I take the photos to the printer to get 4x6 prints, anything that is not 4x6 (such as a square or panoramic image) gets cropped down to fit and I lose a bunch of the image.
I've worked around this by creating some photoshop actions that add white space to either the bottom or side of an image, so that the resulting image is 4x6 format (or 2:3 aspect ratio). The prints come back with white space that I trim on my paper trimmer at home.
However, it's a pain in the butt to have to sort the images into verticals and horizontals to choose which action to run. I am trying to write a simple script to run one action if the image width/height>1.5, and a different action if the width/height<1.5.
Can anyone please help?

Ok here's my version, it also checks for square image.
#target photoshop
var doc = app.activeDocument;
var strtRulerUnits = app.preferences.rulerUnits;
var strtTypeUnits = app.preferences.typeUnits;
app.preferences.rulerUnits = Units.PIXELS;
app.preferences.typeUnits = TypeUnits.PIXELS;
var x = doc.width.value;
var y = doc.height.value;
if (x > y) {
doc.resizeCanvas (x, x/1.5, AnchorPosition.MIDDLECENTER);
if (x < y) {
doc.resizeCanvas (y/1.5, y, AnchorPosition.MIDDLECENTER);
if (x == y) {
doc.resizeCanvas (x*1.5, y, AnchorPosition.MIDDLECENTER);
app.preferences.rulerUnits = strtRulerUnits;
app.preferences.typeUnits = strtTypeUnits;

Pantalla azul y reinició automatico

mi iPhone 5s se reinicia automáticamente y aparece una pantalla azul con líneas verticales y horizontales ocupó ayuda eso sucede al estarlo usando unos 5 minutos
Alguien podría ayudar ya lo eh restaurado en más de 3 ocasiones

Me pasa igual, tengo un mes con el iPad Air, y me da pantalla azul y se reinicia, estando en cualquier parte, me paso con iOS 8.0.0 luego con el iOS 8.0.1 y por ultimo con el iOS 8.0.2. . Por favor responder la solución a este problema...

Uscita dalla modalità debug dpo rimozione break point

se il programma si e' fermato almeno una volta su un break point accade che ogni volta che si rilancia il programma si ferma come se ci fosse un break su una delle parti iniziale del diagramma e bisogna ripetere il run.
La cosa sembra risolversi solo uscendo da labview e rilanciando.

Ciao,
non sono riuscito a riprodurre il tuo problema: dopo che aver rimosso i breakpoints il programma gira senza interruzioni.
Il sospetto è che dopo la rimozione fai partire il programma con il tasto Pause abilitato (tasto della toolbar con due barre verticali, quando è abilitato le barre sono rosse).
In ogni modo tieni presente che puoi ricercare i breakpoints in un diagramma con la voce di menu: Browse - Breakpoints - Find.
Spero di essere stato utile, eventualmente dovresti postare un esempio in cui ti si verifica il problema.
Ciao,
Alberto

Scintillements /saccades/ clignotements quand scrolling sur le Dock et Safari

Bonjour,
Depuis quelques jours je constate un problème graphique sur Safari et sur le Dock.
Mon matériel:
MacBookPro 15'' Retina, octobre 2013, achat reconditionné Apple Store.
Dès que je "scroll" verticalement et horizontalement des scintillements, saccades, presque des clignotements, apparaissent.
Phénomène assez difficile à décrire à l'écrit mais visuellement assez dérangeant.
Une fois les mouvements terminés, l'écran est stable, pas de problème.
Après avoir contacté Apple par téléphone, j'ai fini par réinstaller OS X sur les conseils du technicien Apple.
Cela n'a pas changé le problème d'affichage.
J'utilise donc FireFox pour l'instant et éviter de scroller latéralement pour changer de bureau afin d'éviter ces scintillement/saccades/clignottements désagréables..
Auriez vous des idées pour résoudre ce problème?
Serait-ce un problème matériel (carte mère, carte graphique)?
S'il le faut je prendrais RV en Genius Bar car mon MacBookPro est toujours sous garantie.
Merci!

Scrollbar (barre verticale et horizontale) a disparu

Similar Messages

Maybe you are looking for