Scrollbar Component - how to set the arrows to invisible

Hello Forum
I'm trying to save some coding time by using the flash
component scrollbar.
Is there a way to tun off the visibility of the arrows. The
designer wants
only the scroll thumb (is that the right term?)...
I've imported the component assets into the library and
started to apply
different colors. But the background of the arrow and the
thumb seem to be the
same.
Can this be scripted instead?
Any ideas?
Thanks
Stephank

If you removed them you should be able to drag them back on again. I was not sure they were a feature that could be removed but I did just try and confirm they are removable. They may show up slightly differently when in the customise options compared with how they display once in position on the toolbar.
If necessary use the 'restore default set' button from within the customize menu, or even the safe mode option.
See also
* [[how do i customize the toolbars?]]
* [[back and forward or other toolbar items are missing]]

Similar Messages

How to set the extra component to horizontal scrollbar position

How to set the component to position of horizontal scrollbar , that position contain two component horizontal scrollbar and any component (JButton , JLabel ) like that.. Ms-Word scrollbar ,
Like that bellow fig.


{font:'Times New Roman'}{size:12pt}<img src="file:///C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/msohtml1/04/clip_image002.jpg" alt="" width="485" height="27" />{size}{font}
How to design ?

pradeep.rajadurai wrote:
I want set the JTable as a background of jframe or jinternalframe , how it is possible One way that may work, you can always extract the image from a rendered JTable and then paint the same image into the JPanel that holds your components via it's paintComponent method, then added the JPanel to the app's contentPane.
give me simple pgmIs English your second language? Because if so, please understand that this demand can be taken by some as rude.

How to set the width for a selectManyShuttle component

Hi,
I'm using selectManyShuttle component from Oracle ADF Core and some of the items in the showing list are long, therefore the width of selectManyShuttle expands the page. How to set the width property for selectManyShuttle component? After that does selectManyShuttle provide horizontal scrollbar as well?
Thanks in advance,
lapi
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Solution here:
Re: ADF Faces Scrollable Panel or Scroll Bar inside a component
Regards
Grant

How to set the value of something in a component from the main application?

Hi,
Maybe I've been working on this too long, but I can't figure
out how to set the value of the text property of a text input field
in a component from my main application in an mx:Script block. I
have a component called Login in the components folder, and I need
to set the text value of empNum. In my mxml declaration at that the
top, I've declared these components as xmlns:c="components.*" So
logically, the property I'm trying to set is c.Login.empNum.text. I
can't figure out the correct syntax to get this to work, and I've
tried everything I can think of. Does anyone have any suggestions?
I'm thinking this should be an easy one, and I'm just missing
something.
Thanks!
Holli

Did you try giving it an id ?
<c:MyLogin id="loginScreen" /c>
So later you can do loginScreen .empNum.text = "my text"
Laurent,

How to set the Data Synchronisation mode for ADF BC component?

Hi All,
How to set the Data Synchronisation mode for ADF BC component
Thanks
Raghavendra

Can you clarify what you mean by the data synchronization mode?
If you mean the Sync Mode, then in 10.1.3 you set this property by:
1. Selecting your DataBindings.cpx file
2. Expanding the "Data Control Usages" section in the structure window
3. Selecting the ADFBC-based data control
4. Setting the "syncMode" property in the property inspector.

How to remove the arrow on the splitter and how to set position at 30%

(1) The splitter with the arrow is a collapsible splitter, when you move mouse on the arrow it shows "Collapse Pane".
But I want an uncollapsible splitter, like most splitters (e.g., in Jdev IDE) which do not show the arrow key on the splitter. Can I do that?
(2) how to set the position of a splitter at 20%?

Hi,
Create a application skin, if you do not have one and use following in the skin.
af|panelSplitter::horizontal-collapse-icon
display: none;
}You will be able to resize panel and collapse icon will not be displayed so the panel will not collapse.
You can set the initial splitter position as required.
Regards,
Lalit

How to set the out point beyond 9.95 seconds???

how to set the out point in Motion 5 beyond 9.95 seconds???

First you need to make sure your project is long enough then you can adjust the play range (in/out). To make sure the project is long enough:
1. From the project properties (command-J) go to the Duration field and enter a new duration.
2. Click on the down arrow icon to the right of the current time, there is an option to show the project duration. Once set to this you can double click the number and type in a new project duration. I'd recommend setting it back to show current time when done.
3. Of course you can also change the duration of a project when it is first created, in the project browser.
Once you're sure you have a long enough project you can adjust the in and out range. You then use the zoom controls in the bottom of the timeline to show more of the timeline and adjust the play range as needed. There's lots more about project and play range duration adjustments in the documentation: http://help.apple.com/motion/mac/5.1/

How to set the width of DataGridColumn dynamically?

What I want to do is, load data from a text file and put into a DataGrid component, the fields of ech record in the text have fixed length, and are seperated by a space, like this:
personal.txt
50 Uvwxyz Male    123456789
60 Hijklmn Male    67890123456789
30 Abcdefg Male    123456789012345
40 Opqrst   Female 987654321012345678
the configuration file is column.xml:
<dgcolumn>
     <personal>
          <len>20</len>
          <title>Name</title>
     </personal>
     <personal>
          <len>3</len>
          <title>Age</title>
     </personal>
     <personal>
          <len>6</len>
          <title>Sex</title>
     </personal>
     <personal>
          <len>20</len>
          <title>IdNumber</title>
     </personal>
</dgcolumn>
First I load the column.xml into an arrColumn, then read the personal.txt and seperate the record by the width( "len" in the xml file ), and put the seperated fields into another arrField, set the arrayFld as the dataProvider of a DataGrid, thus, the title can be showed as the headerText of the DataGrid and the data can be loaded correctly.
private function handleComplete( event:Event ):void
     var arrField:Array = new Array();
     var arrFile:Array = loader.data.split(/\n/);
     for( var i:int = 0; i < arrColumn.length; i ++ )
          arrField[i] = convIcom( arrFile[i] );
     adgFile.dataProvider = arrField;
     trace( "The data has successfully loaded" );
private function convIcom( strRecord:String ):Object
     var key:String = null;
     var dataField:String = null;
     var offset:int = 0;
     var obj:Object = new Object();
     if( strRecord.length > 0 )
          for( var i:int = 0; i < arrColumn.length; i ++ )
               dataField = strRecord.substr( offset, arrColumn[i].len );
               key = arrColumn[i].title;
               obj[key] = dataField;
               offset += arrColumn[i].len + 1;
     return obj;
<mx:DataGrid x="10" y="100" width="400" id="dgFile" />
The problem is, the width of the DataGridColumn is average, how to set the column width by the length of each field? I can calculate the rate of each field ( field / fields ), but I don't know how to change the property of the DataGridColumn.width.
Thanks for helping.

In the above post, I pasted an old version of personal.txt, so I paste it again:
personal.txt
Uvwxyz 50 Male   123456789
Hijklmn 60 Male   67890123456789
Opqrst 40 Female 987654321012345678
Abcdefg 30 Male   123456789012345
And I have another question, when the data is loaded into the DataGrid, the fields of each record are ordered in alphabetical order ( the "Age" column will appear firstly, then "IdNumber", "Name", "Sex" ), not as the order in column.xml, how to make it keep the sequence of the xml file?
Thanks again.

How to set the timezone in a DATE datetype?

How to set the timezone in a DATE datetype?
Thanks
Maximus

10.5 Date, Time, and Timestamp
The JDBC API follows the Java platform's approach of representing dates and times as a millisecond value relative to January 1, 1970 00:00:00 GMT. Since most databases don't support the notion of a time zone, the JDBC 2.0 API adds new methods to allow a JDBC driver to get/set Date, Time, and Timestamp values for a particular time zone using a Calendar. For example,
ResultSet rs;
Date date1 = rs.getDate(1);
returns a Date object that wraps a millisecond value which denotes a particular date, like January 3, 1999, and a normalized time 00:00:00 in the default time zone. The time component of the Date is set to zero in the default time zone since SQL DATE values don't have a time component. Since a Calendar was not supplied explicitly to getDate() , the default time zone (really the default Calendar) is used by the JDBC driver internally to create the appropriate millisecond value assuming that the underlying database doesn't store time zone information.
The following example retrieves a date value in GMT-Greenwich Mean Time.
ResultSet rs;
TimeZone.setDefault(TimeZone.getTimeZone("GMT"));
Calendar cal = Calendar.getInstance();
Date date2 = rs.getDate(1, cal);
In the example above, a Calendar is passed explicitly to getDate() to inform the JDBC driver how to calculate the appropriate millisecond value. Note that the same result could have been achieved by simply changing the default time zone, and not passing the Calendar explicitly since the JDBC driver will use the default time zone by default.
Note that the two Date objects created above will not compare as equal assuming that the default time zone is not GMT, even if they represent the `same' date.
if (date1.equals(date2))
//never get here
This is because each Java language Date object really just wraps a normalized millisecond time value and these millisecond values will differ across time zones. If an application wishes to compare dates in different time zones it should first convert them to a Calendar.
An application should create a Date object using a Calendar. The application is responsible for specifying the time as 00:00:00 on the desired date when using the Calendar since JDBC uses this convention. In addition when creating a Time value the application must specify a date of January 1, 1970 to the Calendar used to create the millisecond value for the Time as this is the convention specified by JDBC for time.
Above from:
http://java.sun.com/products//jdk/1.2/docs/guide/jdbc/spec2/jdbc2.0.frame10.html
I hope it can help you!

How to set the size of a JTabbedane to the size of the frame

I have a tabbed pane in a frame, I would like to know how to set the size of the tabbed pane, so that it occupies the whole of the frame which has been set to screen size.
Thanks

Is it not possible to use it with a GridBagLayout?Your question was "How do I get a tabbed pane to take all the space of the frame"?
You where given the answer. Did you try it? Did it work? Then why are you questioning the suggestion?
Its one line of code if you use a BorderLayout which by the way was specifically designed for this purpose.
Yes you can do it with a GridBagLayout with about 5 lines of code.
So the question is why would you want to write 5 lines of code when you can use one?
If your question was "How do I waste my time forcing the GridBagLayout to size a component to take up all the space of the frame", then you would have received a different answer. (Although most people would have told you to use a BorderLayout anyway, since its easier).

How to set the frame size?

Hi,
Can some one show me how to set the frame size in this program? History: I have created a window and added a button but its to small. So I want to increase the size of the frame to at least 600X400 pixel.
private static void showGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame("ButtonDemo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        Main newContentPane = new Main();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    }It would be nice if you could show me how to do it.
Thank you very much for reading this.

Challenger wrote:
Simply adding
frame.setSize(new Dimension(600,400));to the end of your code should work perfectly.Or, if you want to do it correctly, .setPreferredSize() on your frame before you .pack() it. The default layout manager for JFrame is BorderLayout, which uses the preferredSize of each component to calculate sizes during the .pack() call.

How to set the value in SelectOneChoice

Hi,
I need an help....
can anyone please tell me how to set the value in SelectOneChoice.
I want to set the value at index 3
i am trying selectOneChoice1.setvalue(new Integer(3)); but it is throwing an NullPointerException.
Thanks,
Neha

Hi,
is it ADF bound? If so then you set the default value to the list binding in the PageDef file. The value of the component must be bound to a method expression, which is why you see an exception. However, I think we need more information
Frank

How to set the 'Configuration Bits' in the PIC16F84

I am using the PIC16F84 in a circuit and I'm programming the assembly for the PIC. However I can't figure out how to set the configuration bits. For example I want to select the LP Oscillator, turn the WDT off, turn the PUT on, and turn the CP off. Normally if I was using the IDE from Microchip I would add the line:
_CONFIG H'3FF0'
However Multsim does not recognize this as a valid code. In addition the P16F84.inc file contains the following definitions:
_CP_ON                       EQU     H'000F'
_CP_OFF                      EQU     H'3FFF'
_PWRTE_ON                 EQU     H'3FF7'
_PWRTE_OFF                   EQU     H'3FFF'
_WDT_ON                      EQU     H'3FFF'
_WDT_OFF                     EQU     H'3FFB'
_LP_OSC                      EQU     H'3FFC'
_XT_OSC                      EQU     H'3FFD'
_HS_OSC                      EQU     H'3FFE'
_RC_OSC                      EQU     H'3FFF'
What is the code though to select which options you want to use?

Try this code:
_CONFIG _CP_OFF & _PWRITE_ON & _WDT_OFF & _LP_OSC
I tried this in the assembler and it didn't return any error messages when compiling. I found this in a PIC Book that I downloaded off the internet.
I hope it works for you. I am new to the MCU Module and learning about it so don't consider me an expert on it by a long shot.
Have A Nice Day
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

How to set the JMX Engine parameter in Process Administation?

Hi, All,
I installed OBPM10gR3 over WLS 10gR3 clusting environment. OBPM Engines started successfully.
There is one admin server running on localhost: 10101, one manager server running on localhost:10103, another managed server running on localhost:10105.
I wonder how to set the JMX Engine configuration in Process Administration. How about the port? 10101 or 10103,10105? How about the Credentials, weblogic as the default user?
I'm appreciated you can share me the JMX Engine configuration in Process Administation for weblogic clusting. Thanks in advance.
Best Regards,
Bill

Hi, All,
Here is more detail error when I set the JMX host/port to weblogic admin server/port, actually the BPM server is started, and the status of engine in process administation is started and I can run the process normally. I don't know why there is "null" url:
[<D> 0518 16:22:32.930] Main (<3> http-8686-Processor15): should not recreate if it has not been disconnected
[<D> 0518 16:22:32.944] Main (<3> http-8686-Processor15): JspLocationStatus:fuego.jsfcomponents.ui.JspLocationStatus@18a270a
[<D> 0518 16:22:32.944] Main (<3> http-8686-Processor15): ---------------------- UILocation ------------------------------------
[<D> 0518 16:22:32.944] Main (<3> http-8686-Processor15): jspNode label Edit Engine {0} NODE LABEL = Edit Engine {0}
[<D> 0518 16:22:32.944] Main (<3> http-8686-Processor15): HelpRenderer.encodeEnd
[<D> 0518 16:22:32.944] Main (<3> http-8686-Processor15): 1. rendered = null
[<D> 0518 16:22:32.944] Main (<3> http-8686-Processor15): 2. renderedObj = true
[<D> 0518 16:22:32.944] Main (<3> http-8686-Processor15): href = http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/admin_guide/index.html?t=modules/proc_adm_ref/c_Engines.html
[<W> 0518 16:22:32.945] Main (<3> http-8686-Processor15): Error BPM-1242665762773
[     (cont)     ] Main: Error
[     (cont)     ] Main: Caused by: Cannot reach engine 'OBPMClusterEngine' at URL: 'null'.
[     (cont)     ] Main: Caused by: ALBPM.mami.ServerManagement:type=Server,server=OBPMClusterEngine,*
[     (cont)     ] Main: fuego.mami.exception.MAMIException: Error
[     (cont)     ] Main:      at fuego.mami.exception.MAMIException.wrap(MAMIException.java:48)
[     (cont)     ] Main:      at fuego.mami.engine.j2ee.J2EEAdminEngineAccessImpl.getEngineManagement(J2EEAdminEngineAccessImpl.java:72)
[     (cont)     ] Main:      at fuego.mami.engine.j2ee.J2EEAdminEngineAccessImpl.getEngineManagement(J2EEAdminEngineAccessImpl.java:88)
[     (cont)     ] Main:      at fuego.mami.Engine.getEngineManagement(Engine.java:1391)
[     (cont)     ] Main:      at fuego.mami.Engine.updateEngineProperties(Engine.java:1327)
[     (cont)     ] Main:      at fuego.webconsole.model.J2EEJSFEngine.applyPropertiesAction(J2EEJSFEngine.java:150)
[     (cont)     ] Main:      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[     (cont)     ] Main:      at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
[     (cont)     ] Main:      at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
[     (cont)     ] Main:      at java.lang.reflect.Method.invoke(Unknown Source)
[     (cont)     ] Main:      at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
[     (cont)     ] Main:      at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72)
[     (cont)     ] Main:      at javax.faces.component.UICommand.broadcast(UICommand.java:312)
[     (cont)     ] Main:      at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
[     (cont)     ] Main:      at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
[     (cont)     ] Main:      at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
[     (cont)     ] Main:      at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
[     (cont)     ] Main:      at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
[     (cont)     ] Main:      at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[     (cont)     ] Main:      at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
[     (cont)     ] Main:      at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
[     (cont)     ] Main:      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
[     (cont)     ] Main:      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
[     (cont)     ] Main:      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
[     (cont)     ] Main:      at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
[     (cont)     ] Main:      at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
[     (cont)     ] Main:      at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
[     (cont)     ] Main:      at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
[     (cont)     ] Main:      at java.lang.Thread.run(Unknown Source)
[     (cont)     ] Main: Caused by: fuego.papi.impl.EngineNotAvailableException: Cannot reach engine 'OBPMClusterEngine' at URL: 'null'.
[     (cont)     ] Main:      ... 36 more
[     (cont)     ] Main: Caused by: javax.management.InstanceNotFoundException: ALBPM.mami.ServerManagement:type=Server,server=OBPMClusterEngine,*
[     (cont)     ] Main:      at fuego.mami.engine.j2ee.J2EEAdminEngineAccessImpl.getJmxEngineManagement(J2EEAdminEngineAccessImpl.java:147)
[     (cont)     ] Main:      at fuego.mami.engine.j2ee.J2EEAdminEngineAccessImpl.getEngineManagement(J2EEAdminEngineAccessImpl.java:68)
[     (cont)     ] Main:      ... 35 more
[     (cont)     ] Main:
Thanks in advance.
Best Regards,
Bill

How to set the focus on the new added line in ALV list (OO)

Dear Friends,
I have an ALV list based on OO(using alv_grid->set_table_for_first_display), when I click the 'new' button to add a new line, the mouse arrow is always pointing to the first line - not the new created line for user to input!!.
So how to set the focus (mouse arrow) on the new added line in ALV list for user to input it friendly?
Thanks a lot!!

Hello,
To get the selected line row first we have get all the rows in the internal table.
When u click on the button when it is creating the new line we have to pass the row number to the call method
CALL METHOD <ref.var. to CL_GUI_ALV_GRID > ->get_selected_rows
   IMPORTING
      ET_INDEX_ROWS =   <internal table of type LVC_T_ROW > (obsolete)
      ET_ROW_NO      =   <internal table of type LVC_T_ROID > .
CALL METHOD<ref.var. to CL_GUI_ALV_GRID>->set_selected_rows
   EXPORTING
      IT_ROW_NO = <internal table of type LVC_T_ROID>
   or alternatively
   IT_INDEX_ROWS = <internal table of type LVC_T_ROW>
      IS_KEEP_OTHER_SELECTIONS = <type CHAR01>.
http://help.sap.com/saphelp_erp2004/helpdata/EN/22/a3f5ecd2fe11d2b467006094192fe3/content.htm

Scrollbar Component - how to set the arrows to invisible

Similar Messages

Maybe you are looking for