Scrollbar disappears; error messages when quitting

This latest version (3.0.4) of Safari is buggy. I'd appreciate any suggestions:
1) My scrollbar periodically disappears. I have to quit Safari to have it reappear again. Someone suggested that it might be because I have Acrobat Reader installed on my machine. But I never had this problem before this version emerged from buggysville.
2) When I quit this version of Safari, I sometimes get an error message saying it quit "unexpectedly." It doesn't interfere with my functionality, since I already quit Safari, but it's annoying nonetheless. Any suggestions?

If you are updating Safari (or just have):
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail, Dashboard widgets etc also rely.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here, among others, for causing such problems are Piclens and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.0.4.
You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the latest Java update.

Similar Messages

PS CC - Apple error message when 'quitting'.

Hello Everyone, Your help is needed by a someone starting out with PS.
When closing PS I get and error message, 'Could not save Preferences because the file is locked….' I have read other communities entries and tried changing 'library' (not sure which one I did or should have done) to read write for all but nothing has worked. I have uninstalled PS CC and reloaded it but nothing has changed, can anyone help me? Many thanks. Steve

Hi there Chris,
Thanks for taking the time to reply but I am no nearer to finding the file or being able to find something that lets me change settings. I typed in the 'go' then /library/preferences (not sure what the symbol before it was, can anyone help? Any way i did end up finding 2 files as shown below but they did not let me do anything to them.
com.adobe.acc.AdobeCreativeCloud.plist
com.adobe.acc.AdobeCreativeCloud.plist.lockfile
Was I any where close to being in the right place?
Many thanks
Steve

Error message when Quitting PS -HELP!! Can't save prefs

Each time I quit Photoshop CC I get this error message:
"Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I've tried everything I can think of, repairing permissions, using "get info" to myself read & write priveleges, but this ones got me beat, and it makes using Photoshop near impossible, as I hafta set up everything from scratch each time I start. whoever can figure this one out is a damn genius and earns my perpetual gratitude!
System: Mavericks on a 2012 27" iMac, recently installed 250G Samsung SSD and 1TB HDD

In the end it wasn’t hard!
One simply has to go to user/library (Mac), and open preferences. Then drag 2 files to the desktop: com.adobe.Photoshop.plist, and the folder: Adobe Photoshop CC Settings
That was it!! Don't know why I didn't think of it!
oh...wait.
My eternal gratitude to Bharati, from Adobe's tech support chat, the guy knows his stuff!!!
Unlie you bunch of slackers!!!

HT1379 My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying. H

My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
Process:         SafariDAVClient [5937]
Path:            /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
Identifier:      SafariDAVClient
Version:         106
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Responsible:     SafariDAVClient [5937]
User ID:         501
Date/Time:       2014-02-02 15:40:22.026 -0800
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
Crashed Thread: 0 Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
As well, my iCloud Pref Pane will not open!
What the HECK is goin' on?

feckinHell wrote:
As well, my iCloud Pref Pane will not open!
That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
Try this:
Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
~/Library/Caches/com.apple.iCloudHelper
Drag that entire folder to the Desktop.
Quit Safari.
Attempt to open iCloud Preferences again. If it opens de-select Safari.
Launch Safari again and determine if the problem is fixed.

My Reminders app will not open. When I try to open it, quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?

My Reminders app will not open. When I try to open it, it quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?
Also, the Calendar is loading very very slowly, and sometimes it quits and gives me the same error message as above.

The problem has been fixed with the most recent OS X software update.

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue.... This thing is so annoying when trying to go somewhere i just want the error message to go away.

In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Getting error message when i am trying to update the excel file using script task in ssis package

Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that   I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
        Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
        wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
        wbnacomm.RefreshAll()
        wbnacomm.Save()
        wbnacomm.Close()
        excelnacomm.Quit()
        Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126

Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Error message when starting Firefox 8 that says: TypeError: Components.classes[TvtPwmComponent_CID] is undefined

error message when starting Firefox 8 that says:
TypeError: Components.classes[TvtPwmComponent_CID] is undefined
I am using Window 7 64 bit

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Error message when burning Home Folder backup disk

I got this error message when trying to burn a backup disk (cd-rw) of my Home Folder. Could somebody please help me figure out what this means? -
The operation cannot be completed because one or more required items cannot be found.
(Error code -43)
Could not open the data fork of "<unable to get file path>" (-43).
Any help would be greatly appreciated.
iMac Intel Core Duo Mac OS X (10.4.4)
iMac Intel Core Duo Mac OS X (10.4.4)

There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

How do I fix -50 error message when syncing phoneon Windows 7?

How do I fix -50 error message when syncing phone on Windows 7?

Quit Mail. Back up all data.
Triple-click the line of text below to select it, then copy to the Clipboard:
/Library/Mail/Bundles
In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
A folder may open. If it does, move the following item in that folder to the Trash:
UnsubMailPluginMailAppOSX.mailbundle
You may be prompted for your password when you do this.
Launch Mail.

Error message when starting firefox

since I've installed the latest update (firefox 4.0.1) I get the following error message when starting firefox:
'''Type Error: Components.classes [TvPwm Component_CID] is undefined'''
I must then click on OK to get firefox to open => very annoying!
I'm using a ThinkPad laptop and the passwordvault which was perfectly available in the older version of firefox don't open in tools any longer, when forced via lenovo thinkpad tool, it daoesn't launch the asked for site either.
Thanks for helping me.
Claudia

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I get an error message when trying to update quicktime player

why do i get an error message when i try to update quicktime player that says "the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below".. when i try to locate the file quicktime.msi, i am unable to locate it anywhere on my pc, which then will not allow me to complete the installation, nore will it allow me to uninstall the application.

"the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below"..
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another QuickTime install. Does it go through properly this time?

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Scrollbar disappears; error messages when quitting

Similar Messages

Maybe you are looking for