Scrollbar Help Appreciated!
Hello everyone, this is my first post and was hoping for some
advice.
I am fairly new to Flash, I have no idea about Actionscript,
a part from stop();
I have designed a button that when you put your mouse over,
it slides out using a motion tween to reveal a panel with thumbnail
pictures. However, I need to make the panel scroll downwards to fit
all of the pictures on. When I click on the pictures, I want it to
take me to the relevant frame.
Please could someone point me in the right direction as to
how I could do this, links anything!
Many thanks,
Helen
You could try to put the two trees into a ScrolledComposite.
This way they should always have enough space available and probably
won't display their own scrollbar.
See the SWT teams Snippets page for an exmaple how to use ScrolledComposite.
Yves
exquisitus wrote:
> Hi - I have 2 trees side by side in a composite. I want both to use only
> the composite (vertical) scrollbar as oppose to each using their own.
> I've tried setVisible(false) but as soon as a resizing takes place the
> scrollbar appears plus this does not force it to use its parent. Is
> there a way of forcing a Tree Widget to use its Parent scrollBar. Any
> help appreciated.
>
Similar Messages
-
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
I can no longer attach files to my outgoing Hotmail emails. I only receive a message where I would expect the Upload to appear that an error has occurred.
I am using a MacBook Pro with Retina, 2 Ghz Intel Core i7, OS X 10.9.4
I have no difficulty attaching files to the outgoing Hotmails on the same account using my iPhone.
Help appreciated.Thanks for this - not an immediate solution I fear but will keep unplugging stuff and restarting stuff.
To try and be clearer about the problem - I have in the last managed to send attachments successfully. Now I can send and receive plain email messages but get the error message when I try to attach an existing file to an email - not just a particular file but it would appear all files are being treated in the same way.
An experiment to send a mail to which an attachment has failed to upload got the following message alongside the SEND button
Files with errors will be removed from the email and not sent.
- but the mail alone was sent and received successfully. Thanks for any pointers you can give me. -
I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.
Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.
-
I have tried many times to restore my new IPod Touch 5G in I Tunes and it will not allow me to do it. My Ipod will not turn on at all even when on a fresh charge. Only displays the arrow leading up to ITunes logo. I have tried the method of holding the home button and on button and this does not work. Any help appreciated.
My I Pod was working fine until the day I updated the software to 6.0.1.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.
I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!
You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement. -
Any help appreciated - iTune compression problems
Hi there,
Just bought a second hand iPhone 3g yesterday that has to last me out 5 months before my contract is up and I can hopefully get a 5 if it's out (touchwood).
Transferred some music from iTunes to my iPhone and on the phone speakers it sounds fine, however when I put my headphones into the jack it's incredibly distorted and sounds like it's suffered far too much compression.
I'm guessing this is possibly a headphone jack related problem as opposed to a compression issue? Tried converting files to AAC but made no difference
Any help appreciated!
Thanks
DanFYI - the iPhone includes a single external speaker. The opposite grill that appears the same is a microphone.
If this were a compression or format issue, the same would occur when playing the music via the speaker. Using earbuds has no affect on the compression or format. More than likely this is a headphone jack related problem or there could be a problem with the earbuds being used. -
Any help appreciated - - on barefoot ski image optimization
Any help appreciated.
Working with Photoshop 7.0 trying to color correct and optimize an image of my son barefooting to prepare for giant vinyl print to create a stand up cut-out on a foam board.
I will attach 2 downsized images for comparison.
As you can see one image has nice smile but no sunlight and other image has great sunlight but no smile.
I need to optimize for CMYK printing the smiling image. I know a bit about levels, but don't know what to change for midtones, highlights, etc. to try and correct this smiling image as best possible.
Unfortunately I did not set up the Canon EOS Xsi camera to save RAW images at 17 megs and the boat owner is not wanting to go out again for another photo session. Original image is 4.5 megs jpg which I crop image, adjust histogram by "sliding in the sides", convert to CMYK, sharpen unmask at 98%, increase brightness with middle slider in histogram, expand size up to 72 inches tall by 54 inches wide and also set to 150 pixels per inch (may try 300), save as LZW TIFF.
After that image is like 400 megs, then import into illustrator CS and tile out just the face of a 72 inch X 54 inch and it's amazing pretty clear for 100:1 file size increase (13 X 9 inch sheet).
I have access to CS4 on Mac only - - don't know if CS4 Mac file will have any big advantages over my 7.0 in Windows . . .Hmmmm, wonder if anybody ever created a plug in for photoshop that allowed you to add more lighting to an image, as in light coming from behind the photographer - - like sunlight effects ?
-
A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
RobbieYou won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out). And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G. He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup. Unfortunately, there isn't any way around it.
-
What can I do to get Adobe to download a pdf file it has converted into a doc or docx file? Any help appreciated!
Hi Ebbelby,
You're welcome!
Happy to help
Regards,
Rahul -
Hi, I have a sign being advised Power PC Applications no longer supported when I try to go into Microsoft Word, Excel, Entourage & MSN Messenger, hoe do I resolve this? Any help appreciated Sorry, this is for a Mac Air
Most versions of Office 2008 use an Universal installer. A few have one which is PowerPC-only.
In any case, Mac OS X Server 10.6 can be run in emulation, and Rosetta applications can be run in it. Saying that PowerPC-only applications won't run in Mac OS X 10.7 is correct. Saying that they won't run on a Mac which shipped with Mac OS X 10.7 is not.
(66375) -
OCCI VS2005 InstantClient 11_1_0_7 - really close, help appreciated
OK, I have an OCCI app written in VC++8 (DevStudio 2005).
I have downloaded InstantClient 11_1_0_7 Basic plus the SDK.
The program compiles and links, and I am linking against the oraocci11.lib in instantclient_11_1/sdk/lib/msvc/vc8
Note that with this version of the SDK, there is no "debug" version of oraocci11.lib, as there was under 10_3, so I am using the
same one for Release and Debug. For the Debug build, I exclude msvcrt.lib from the default link libraries.
I copy oci.dll, orannzsbb11.dll, and oraocci11.dll from the top-level instantclient directory to the directory with my executable.
Now, if I take the oraocci11.dll from the top-level instantclient directory, and use it, my program runs, and it can createEnvironment,
but then I get the error ORA-24960: the attribute OCI_ATTR_USERNAME is greater than the maximum allowable length of 255.
Searching around suggests that I'm using the wrong DLLs (VC++7) when I get this error.
If I instead take the oraocci11.dll and oraocci11.dll.manifest from the instantclient_11_1/vc8 directory, the program will not start,
I get a Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly.
I get the same errors on the Release and Debug builds.
Any help appreciated!They say "Using a 32bit DG4ODBC on a 64bit Windows operating system is NOT certified." but we do it extensively and it works just fine. You need to install a 32-bit home and create a listener for the 32-bit gateway. Only downside (aside from maintaining 2 homes) is that if you need to file an SR, you must prove that you're able to reproduce the problem when the gateway is running on a 32-bit OS. We keep a little 32-bit server around for this purpose and point our gateways to that box to reproduce issues for SR's.
If you want to run "certified" all the time, you could leave the gateways running in Production on a 32-bit OS, but it runs considerably slower this way, and all because Oracle won't support your SR's. You have to decide if you really think you'll hit an issue that wouldn't reproduce on the true 32-bit OS and decide if it's worth the risk. We've made our decision...
Good luck! -
When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!
Hey there Dan256162,
I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
iTunes: Possible iTunes Store errors - Apple Support
http://support.apple.com/en-us/HT203174
And here is the linked troubleshooting article that will help you resolve the issue:
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
http://support.apple.com/en-us/TS4123
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden
Maybe you are looking for
-
Post Author: lkamesam CA Forum: Integrated Solutions Hi, I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error: Does any bo
-
Where we can link the vendor & Customer open and cleared iteams.
Dear Experts, Vendor & Customer open line iteam and clear line iteams tables is BSIK, BSID, BSIAK,BSAD, But where we can link the open iteam and clear iteam, what is the link table of open iteam and cleared iteam. And where we can link the
-
Capturing input video from a DV camera
I found that my old Sony HC90 DV camera makes a good video to Digital converter so I can make DVDs of my old family VHS tapes made over 15 years ago on a video only camera. I set it up using firewire so that the VCR video is visible on the camera vie
-
Delete condition records in VA01
Hi, I am trying to write a BDC for VA01. There are SOME(not all) unwanted condtion records comming. how can i remove those condition records (Goto - > Header - > Conditions) thru BDC. Regards, Naveen Vishal
-
0material inactive and error installing 0material in BCT
Hi Experts We just had a fresh Netweaver 2004s (BI7) installation and I am having problems activating 0Material in Business Content I recieve errors like Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding Message no. R7B641 Attribute