Scrollbar resets to top when loading new images

Hi,
When viewing an email (in Apple Mail, of course) that has several images, the scrollbar will reset to the top of the email every time an image finishes loading. It's really annoying, as I'd like to be able to scroll through the email as images are loading.
Thoughts/ideas? I don't recall this being an issue before Snow Leopard.
Seems like I've even had it happen in Safari under certain circumstances, though I haven't identified the cause in that case.

Hello,
i have the same problem and i need a solution. The Problem apears while images loading from external servers.

Similar Messages

Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces'

Hi all,
I know that I can delete anchor points but I was wondering if there is a shortcut to do it on a larger scale.
Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces' the image, only on the parts obviously that you cover with the new one.
Thank you all

Hi,
I'm using CS6, and I have a tree vector image, and I am trying to put names on top, but when I do this to keep it clean with no anchor points (as my other software cant read it with all the points in it) I have to manually delete each one but it deletes the whole path and I then end up with a tree, names on top, and a big gappy circle around the names.
So really, I wanted to add the names on top, and have that delete all anchors underneath .
Does this make sense? :S

Slideshow image resizing when adding new images

I am creating a series of slideshows on multiple pages. I created one slide show using the "basic" slideshow and resized it to the dimensions and settings I wanted. I have many pictures all of different proportion, therefore, I selected the "fill frame proportionally" so they would all fit the dimension I set. I wanted to use this first slideshow as a template for all of the rest. I added images to this first slideshow with no problems. All of my different sized images scaled or cropped to fit within the dimension I set. The problem comes in when I do two things: 1) When I add other images of different dimensions to this same slideshow gallery, they come smaller that the intended dimensions I set previous. I check the setting and it is still on "fill frame proportionally" similar to the first batch of pictures. 2) The second issue is when copy this slideshow as a template to other pages. When I try to replace or add to the slideshow gallery, the images come in cropped or smaller rather than filling the frame. Again, the settings are still the same from my very first slideshow that worked just as i intended.
I could resize all the images to all the same dimensions using another program like photoshop, but that is another step that is very tedious and it would seem that it should be something built into Muse.
Is there a way around this?. Am I doing something wrong? Or is this just one of those glitches that happens with Muse? I appreciate any help that I can get.
Thanks!

Hi, I got it to work like this:
Using background colours in Photoshop so that all sizes are the same in pixels. Then manually adjusting thumbnails by double-clicking on them so that a red square appears.
Cheers,
Elsemiek
Op 26 dec. 2014, om 00:50 heeft MediaGraphics <[email protected]> het volgende geschreven:
slideshow image resizing when adding new images
created by MediaGraphics <https://forums.adobe.com/people/MediaGraphics> in Adobe Muse Bugs - View the full discussion <https://forums.adobe.com/message/7043933#7043933>
Hi there Elsemiekagain,
I had to fiddle around with my slide show to get it to work. That is, it worked at first, then went funky, and I had to fiddle. So much fiddling that I can't possibly know what actually made it start to work again.
And to some degree, this is the way that I find Muse to be in general. That it requires finessing to get it to work as expected. This adds a good deal of time to every development project, though I am getting better at this with practice and experience.
Most of it is not even things that could be easily put in words as instructions, as many are nanced. But in fairness, this version of Muse is a complete code re-write this year. So we do need to cut Adobe some slack, and give the team time to iron things out.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043933#7043933 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043933#7043933
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Muse Bugs by email <mailto:[email protected]ftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 59>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Image Fade Out/Load new Image/Fade In

I think I am having an event timing issue. My desire is to
change the "header" image on each selection of a tabNavigator. I
can swap the image without issue through a img.load process. I
placed the image on a canvas and set the "showEffect" and
"hideEffect" on the canvasto fadeIn and fadeOut. (I actually have 2
images on the canvas) On the tabNavigator "change" event I call my
getImage() function and set canvs.visible=false, I have the tab
index for img.load=headerPic[idx] and then I set
canvs.visible=true; The result is that I do not get the first
visible change, I think. Tab 1 is initialized to visible in
ionComplete, clicking on tab 1 has no effect since it is selected
already. When tab 2 is selected the image changes to the new image
immediately and then fadesOut. Tab 3 then will fadeIn. Also
regardless of the tab selected, if I select another tab the ongoing
fade effect will continue on the newly selected tab. It seems the
load method doesn't care about effects - so I don't know how to
sequence these effects.
Thanks in advance.

"EWN-CMI" <[email protected]> wrote in
message
news:gk46uv$blo$[email protected]..
>I think I am having an event timing issue. My desire is
to change the
>"header"
> image on each selection of a tabNavigator. I can swap
the image without
> issue
> through a img.load process. I placed the image on a
canvas and set the
> "showEffect" and "hideEffect" on the canvasto fadeIn and
fadeOut. (I
> actually
> have 2 images on the canvas) On the tabNavigator
"change" event I call my
> getImage() function and set canvs.visible=false, I have
the tab index for
> img.load=headerPic[idx] and then I set
canvs.visible=true; The result is
> that
> I do not get the first visible change, I think. Tab 1 is
initialized to
> visible in ionComplete, clicking on tab 1 has no effect
since it is
> selected
> already. When tab 2 is selected the image changes to the
new image
> immediately
> and then fadesOut. Tab 3 then will fadeIn. Also
regardless of the tab
> selected, if I select another tab the ongoing fade
effect will continue on
> the
> newly selected tab. It seems the load method doesn't
care about effects -
> so I
> don't know how to sequence these effects.
You can use the completeEffect on Image to have an effect
every time an
image loads, such as you can see used here
http://examples.adobe.com/flex2/inproduct/sdk/photoviewer/PhotoViewer.html,
but I don't think there's a corresponding effect that you can
apply to the
old image before the change.
I think you're going to need to use ActionScript to get the
control over the
effects that you want, so you can call either the end() or
the reverse()
method on the effect when the graphic needs to change in
mid-effect.
HTH;
Amy

"Access Denied" when loading an image..

filename=getParameter("picture" + i);
try
ScrollingImages.picture=this.getImage(new URL(filename));
catch(Exception e)
bufferGraphics.drawString("ERROR:" +e,50,70);
Returns:
Java.security.AccessControlException..
I had a similar problem when loading text files, and had to use a stream tokenizer..
How to I get around this?
Thanks

Hello Robertgamble,
It looks to me like your Java program cannot get access to the files that you are trying to access. If you are running these on a Unix computer, make sure that all file permissions are set to read access. You can use the:
chmod 744 "filename"
or you can change the "744" to any other access permissions desired to access the file.
If you are running this on a Windows systems, make sure that you are accessing the image from the correct path on your system.
Hope this helps,
Ming
Developer Technical Support
http://www.sun.com/developers/support

Firefox sometimes freezes when loading new pages

I have had an issue for several months now & any help with it would be gratefully appreciated.
Quite often, when loading a new page, Firefox will hang for up to 30 seconds; the loading circle in the left hand corner of the tab will freeze & I will be locked out of the browser. That website's usually then fine for the rest of the session, but if I close and reopen Firefox the same thing will happen again.
I have tried other browsers such a IE, and the same thing also happens there. My laptop is becoming quite claggy in general, but I'm hoping I can at least find a solution to this!

Do you get a dialog saying a script is running slowly with Stop/Continue buttons, or does the problem just clear up without any messages?
Two other thoughts:
(1) To diagnose a possible Flash issue, you can switch the Shockwave Flash plugin to "Ask to Activate." The page should load the non-Flash components first. If it's just as slow, then we can rule out Flash as a potential culprit, but if it's much faster, that would be useful to know.
You can make the change on the Add-ons page. Either:
* Ctrl+shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins. Then use the drop-down list for Shockwave Flash to select "Ask to Activate."
Sites that use Flash will generate a notification icon on the address bar, and either a link will appear in the black rectangle where you normally get videos loading automatically, or an infobar will slide down between the toolbar area and the page.
(2) About 8 months ago, a user with an enormous font collection discovered that when visiting pages that use downloadable fonts for the first time during a session, Firefox would hang for 3 minutes. ([https://support.mozilla.org/en-US/questions/957111 Firefox hangs on Websites (example: g2play.net)]) I don't know whether this is still a problem, but if you have tons of fonts, as a diagnostic, you could temporarily disable downloadable fonts.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste '''gfx''' and pause while the list is filtered
(3) Double-click the '''gfx.downloadable_fonts.enabled''' preference to switch its value from true to false.
I say temporary because many sites now use fancy fonts to display little icons instead of using images. With downloadable fonts disabled, these icons turn into tall rectangles with two rows of two characters (in other words, useless).

Exception when loading an image in ImageIcon component

Hello,
I want to load an image whose name or path contains special character such as accents (a french name). So that generates an exception. For exemple for an image named caf�.jpeg I obtain this message :
java.io.FileNotFoundException: /media/disk/images/caf��.jpeg (No such file or directory)
Can you please help me.
Thanks in advance.

Can you store multiple images in memory and be able
to reference them all individually, or is it better
to store them in a construct, such as an array and
then loop through that when attempting to match?I'm sorry but I don't understand the question. And does it
have anything to do with images per se? Can it be generalized
without losing its meaning:
Can you store multiple objects in memory and be able
to reference them all individually, or is it better
to store them in a construct, such as an array and
then loop through that when attempting to match?It seems to me that multiple objects should be stored in
an appropriate collection, if that is what is required.
Perhaps you need to say more about what you are trying to
do, what your goal is, to make your question meaningful.

Disk Utility Freeze when using New Image

Has anybody experienced the following?:
my system:
Brand new Mac Pro 8-core 2.66GHz
24GB RAM
Snow Leopard 10.6.3 freshly installed
Apple SuperDrive DVD
I am in the process to install a lot of software and I like to make Disk Image of the software DVD to make things quicker to install.
Now what happens is that as soon as I select New Image from Disk Utility (after selecting the DVD on the left menu), the New Image progress window appears and then Disk Utility freezes. The disk image is being created in the background, but the progress window DOES NOT show the disk image status and eventually I have to OPTION-APPLE ESC from Disk Utility.
What I have tried is:
. delete plist for Disk Utility in Preferences
. repair permissions in SAFE BOOT mode
After that Disk Utility/New Image will work the first time as expected, and then the next time I am getting the same problem.
Any ideas what I could try to diagnose/fix this problem?
Thank you!

Thanks for your feedback.
As far as making a disk image or not, yes it takes some times to create it... longer? I am not sure because when you install a software there is a back and forth reading/writing, whereas when you create your disk image it does the reading and writing in a linear fashion... anyway to me the big benefit is when you have more than one disk part of an install (Apple FCS, Adobe CS, etc...) once you have created all your disk image, it will install everything automatically without having to feed each disc... and usually I have to do a fresh install later on... and finally it gives you a backup of your software...
Thanks again.

Photoshop CS6 pixelates when creating new image

When i create a new image in photoshop it pixelates. Im not sure what settings im missing. I created a rounded rectangle which pixelates in their corners

From what you are showing in the above settings it will pixelate?
100x145px then enlarged on screen (about 500%) like you have in the above screenshot?
If you want a larger art board then create it larger in size? If you view the above art board in the exact size then the corners will appear just right..?
Example below...
Viewed at 500%
Viewed at 100%

Blank window when loading an image

Hello,
I'm new on Javafx, i've written the following example for loading an image, but it does not work.
Here is the code
<code>
public class Load_Image extends Application {
* @param args the command line arguments
public static void main(String[] args) {
launch(args);
@Override
public void start(Stage primaryStage) {
Rectangle rec = new Rectangle(200, 400);
ImageView iv = new ImageView(
new Image(getClass().getResourceAsStream("image.png")));
iv.setFitHeight(rec.getHeight());
iv.setFitWidth(rec.getWidth());
StackPane root = new StackPane();
root.getChildren().add(iv);
primaryStage.setScene(new Scene(root, 300, 250));
primaryStage.show();
</code>

I'm sure there is a theoretical limit, but it should be large enough to hold anything you are likely to use.
Can you open the image in other programs? Does [url http://docs.oracle.com/javafx/2.0/api/javafx/scene/image/Image.html#isError%28%29]Image.isError() return true? And where exactly have you placed the image?

Losing network connection when loading new firmware from iTunes (or syncing

Noticed this when loading 1.1.1 weeks ago and now 1.1.2. Several times during the download/installation process, I lost my network connection. Rebooting the PC restored it, only to have it go down again, requiring another reboot. Required several PC (not iPhone) reboots to be able to complete the process. This happens only during this process -- I otherwise never lose my network connection and always enjoy super speed. Paid it no mind and dismissed as a fluke during 1.1.1 upload, but was surprised to see it again this time. In both cases the final download and install worked perfectly. It's just a time-consuming hassle -- kinda weird -- thx much in advance for any clues about this...

It appears the problem appears only when using torrent software.
There is a lot of discussion on different torrent software forums about this, and directions on how to get around this issue. However with my skills I only managed to get Vuze to work properly while killing the network access from all other application. So i just went back to default settings.
I give up for now, I'll wait until Apple releases OS X update that works together with these programs (like it did in tiger and earlier versions..) or if it's even possible, one of the programs finds a way to get around this issue.

How to update ALL records when inserting new image

I have categories and subcategories and they contain images. The images are in db with an order number, the lowest number is shown first on the website
When I insert images (i have a multiple image uploader) all order numbers need update. WHen I insert for exemple 4 images, these 4 image have order 1,2,3,4 and the order of images already in db (for that category) need to become current order number + 4 and I don't know how to do this.
Anyone that can point me in the right direction?
Bianca

I suggest a different approach.
If you are timestamping your db records, use that field to determine the order. However, a simple update query will work.
update yourtable
set field = field + 4

Set "Referer" when loading an Image through Toolkit

To load an Image using an HttpURLConnection, I use the abstract java.awt.Toolkit.getImage(URL url) method, which is implemented by sun.awt.windows.WToolkit. This method uses the HttpURLConnection to load the Image.
The problem I have, is that I don't know how I can set the HTTP "Referer" request header. There is a method in the HttpURLConnection called setRequestProperty(String key, String value), which I could use, but I can't reach the HttpURLConnection being used to load the Image.
I would consider another way to load Images, but that would mean quite a bit of refactoring. I would prefer not to use Reflection, though.

I did look at the HttpsURLConnection (of which we also have our own implementation), but that still doesn't solve the problem, unfortunately.
Is there maybe another way to load an image from an HttpURLConnection or HttpsURLConnection? If there's a way that I can provide or access the connection being used and still get an Image object, I would be a happy man!

Imac shuts down when loading new music or new software

My Imac shuts down (intermittently) when loading music or software. Logic board was replaced I believe because fire wire connection was intermittently not working (1st year).
Hard drive was replaced recently (Dec 2010). Now SuperDrive and Cable (Optical Data, Flexible) was JUST replaced. But when I was on my third CD loading it shut down 3 times.
Has anyone had this problem and know of a solution?
Works fine otherwise
Apple Store has run software on it and everything seems to pass.
It seems to shut down less when firewire is disconnected (back up hard drive LaCie) but still occasionally shuts down.

I have plugged my computer in three different places over the years and have had the same problem. I have also brought the power cord with computer for work and I am assuming they would have picked that up when they run their tests on the computer.
Could it be the keyboard (never brought in) or WiFi connection (don't think they would plug in anything)? A combination of this with load software/music?
Thing is the computer works perfectly otherwise. It is only does this when loading software or music from a cd/dvd.

ITunes freezes when loading new songs to iPod

I have a 60 gig video iPod. I am running the latest version of iTunes with a library of 21886 songs (73 days).
Recently, iTunes has been unable to load new songs to the iPod. It simply freezes while loading the new songs.
I tried deleting and reinstalling iTunes, but this didn't resolve the problem. (The uninstall was performed using the iTunes software, so it continued to recognize the previously existing music library upon reinstall).
Anyone have any thoughts or suggestions on how to fix the problem?

FIrst goto control panel>add and remove and uninstall iTUnes AND quicktime there. DIsable antivirus and download/install the latest version off apple.com
It may be where your library is so big. Also try updating the ipods software witht eh ipod updater 06-28-2006

Scrollbar resets to top when loading new images

Similar Messages

Maybe you are looking for