Scrollbars and panels, weird behavior

when i resize my app the scrollbars just dont stay where they
should.
using the scrollbars on the panels dont seem to work, if the
content extends beyond the bottom of the panel, the panel doesnt
even offer to scroll, so i've had to do this with whatever layout
piece is inside the panel, i.e. vbox, hbox, tilelist. the problem
with that is the panel allows the scrollbar to extend below the
bottom of the panel, so the bottom arrow on the scroll bar is not
visible. this is driving me nuts.
ive tried making a function to run on the application resize,
but i just cant get it to work right.. has anyone else had a
problem with this?
thanks!

Basically each component at whatever level will resize to the
next level up and add scroll bars accordingly. If you don't want
this behavior then only constrain the outermost container, then the
layout of it's children will remain the same (you'll just have to
scroll to see the rest of the content. This applies to the
Application as well (set verticleScrollPolicy=true in the
Application tab) you might also have to use
layout="absolute".

Similar Messages

Why do I get the beach ball, and other weird behavior, while downloading songs from the cloud?

I created a smart playlist to filter out my matched and purchased songs that were less than 256kbps. I then "select all" (or do them in small chunks this way) and delete the tracks, move them to trash (not from icloud) and then select all again and download the better quality versions.
Many, many times it runs fine for a bunch of tracks and then all of a sudden it locks up with the beachball.
I've had to re-start my mac a few times. Three times I've had it treat me like this was the first time I've opened itunes. Had to accept the licensing agreement and re-start itunes match. Other times it did not make me do this all over again.
Based on stuff I read on the boards I tried deleting the itunes preference file in my user library. Hasn't stopped the beach ball.
I don't understand why it runs for a bunch of tracks and then just locks up.
Maybe I'm not removing all of the plist files I should but I thought so.
Any advice?
Thanks.

Disk Utility has two things (at least my old version does), First Aid and Permissions. If your drive reports problems when verifying with FA then you have to boot from another drive to try to repair. Permissions can run on active boot disk. Run FA before Permissions.
On occasion I have had FA report problems when verifying on my active boot disk and I think it was because files were changing and it was seeing errors that weren't really there. I frequently verify my active drive (quit all applications) and have it report all-clear so usually I verify the active drive and only verify externally if I see an issue.
On the beachball issue, how long do you let it go before force quit? Some things just take a long time to process, and smartlists can be a pretty heavy demand in iTunes.

Daily seize-up and overall weird behavior

At least once per day my Macbook Pro (2009) beachballs where some apps are still responsive and others are not. Then after a minute or two the entire machine seizes up. This happens to every single Mac user I work around (probably 20-30 of us). One common denominator is that we all run the Aventail VPN client. It seems to occur when we are on flakey wireless connections we can be sure to see the machine seize up at some point. Does anyone have any suggestions on diagnosing this more accurately and ultimately finding a fix for something like this?
On occassion I also won't see the machine seize up, it will "gray screen" with the message that I need to reboot my machine. Here is what the machine gave me upon reboot today. I've been simply living with this (as have others around me) for about 6-12 months. I'm tired if ignoring it and want to find a cure. Unfortunately I don't know how to read this, could someone give me some advice/suggestions on the paste below and a figuring out a greater plan to resolve?
Interval Since Last Panic Report: 437550 sec
Panics Since Last Report:          3
Anonymous UUID:                    D39AF86F-FFCE-4E6A-A49A-4D98485D0AEF
Fri Jun 10 09:46:00 2011
panic(cpu 0 caller 0x2aab55): Kernel trap at 0x82101030, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x82101030, CR3: 0x00100000, CR4: 0x00000668
EAX: 0x00000000, EBX: 0x0e99a684, ECX: 0x61000000, EDX: 0x82101030
CR2: 0x82101030, EBP: 0x82d33d38, ESI: 0x00000000, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x82101030, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x82d33b28 : 0x21b50c (0x5d4438 0x82d33b5c 0x223974 0x0)
0x82d33b78 : 0x2aab55 (0x59623c 0x82101030 0xe 0x596406)
0x82d33c58 : 0x2a09a8 (0x82d33c70 0x0 0x82d33d38 0x82101030)
0x82d33c68 : 0x82101030 (0xe 0x48 0x10 0x10)
0x82d33d38 : 0x4c785e (0x0 0x0 0x82d33e08 0x4b2184)
0x82d33d48 : 0x4b2184 (0x107487f8 0x0 0x82d33e44 0x82d33e1c)
0x82d33e08 : 0x4b85a2 (0x107487f8 0x82d33e44 0x1c1c25c0 0x7e332800)
0x82d33ee8 : 0x4b89b7 (0x1c1c25c0 0x0 0xe41e874 0x1d)
0x82d33f78 : 0x4f13be (0xd91c540 0xe344768 0xe41e874 0x227966)
0x82d33fc8 : 0x2a143d (0xe344764 0x0 0x10 0xdde90e0)
BSD process name corresponding to current thread: mDNSResponder
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 5510024362100
unloaded kexts:
com.aventail.xgfilt.kext          1.0 (addr 0x82100000, size 0x24576) - last unloaded 5510020815918
loaded kexts:
com.regularrateandrhythm.driver.RowmoteIREmu          1.0
com.McAfee.kext.AppProtection          1.0.0d1
com.mcafee.kext.Virex          1.0.0d1
com.mcafee.epe.driver.EpeMacBlockFilter          1.0.0
com.mcafee.epe.driver.EpeMacInfoService          1.0.0
com.apple.filesystems.afpfs          9.7
com.apple.nke.asp_tcp          5.0
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AGPM          100.12.19
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleUpstreamUserClient          3.4.5
com.apple.driver.AppleMCCSControl          1.0.17
com.apple.driver.AppleHDA          1.9.9f12
com.apple.driver.AppleMikeyDriver          1.9.9f12
com.apple.kext.AppleSMCLMU          1.5.0d3
com.apple.driver.AudioAUUC          1.13
com.apple.driver.SMCMotionSensor          3.0.0d4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.driver.ACPI_SMC_PlatformPlugin          4.5.0d5
com.apple.GeForce          6.2.6
com.apple.driver.AppleLPC          1.4.12
com.apple.driver.AppleBacklight          170.0.34
com.apple.driver.AppleUSBTCButtons          200.3.2
com.apple.driver.AppleUSBTCKeyboard          200.3.2
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBCardReader          2.5.8
com.apple.iokit.SCSITaskUserClient          2.6.5
com.apple.iokit.IOAHCIBlockStorage          1.6.3
com.apple.driver.AirPortBrcm43224          426.36.1
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleFWOHCI          4.7.1
com.apple.driver.AppleUSBHub          4.1.7
com.apple.driver.AppleAHCIPort          2.1.5
com.apple.nvenet          2.0.15
com.apple.driver.AppleUSBEHCI          4.1.7
com.apple.driver.AppleUSBOHCI          4.1.5
com.apple.BootCache          31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.5
com.apple.driver.AppleSMBIOS          1.6
com.apple.driver.AppleACPIEC          1.3.5
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          105.13.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.11
com.apple.driver.AppleIntelCPUPowerManagement          105.13.0
com.apple.driver.IOBluetoothHIDDriver          2.3.8f7 - last loaded 5392941462560
com.apple.iokit.IOBluetoothSerialManager          2.3.8f7
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.DspFuncLib          1.9.9f12
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleSMBusController          1.0.8d0
com.apple.driver.AppleSMBusPCI          1.0.8d0
com.apple.nvidia.nv50hal          6.2.6
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOAudioFamily          1.8.0fc1
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          1.9.9f12
com.apple.iokit.IOHDAFamily          1.9.9f12
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleSMC          3.1.0d3
com.apple.driver.IOPlatformPluginFamily          4.5.0d5
com.apple.NVDAResman          6.2.6
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.driver.BroadcomUSBBluetoothHCIController          2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController          2.3.8f7
com.apple.iokit.IOBluetoothFamily          2.3.8f7
com.apple.driver.AppleUSBMultitouch          206.6
com.apple.iokit.IOUSBHIDDriver          4.1.5
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.5
com.apple.iokit.IOUSBMassStorageClass          2.6.5
com.apple.driver.AppleUSBMergeNub          4.1.5
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.5
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6
com.apple.iokit.IOAHCISerialATAPI          1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.5
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IO80211Family          312
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.1.5
com.apple.iokit.IOAHCIFamily          2.0.4
com.apple.iokit.IOUSBFamily          4.1.7
com.apple.driver.NVSMU          2.2.7
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.5
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.2
com.apple.driver.AppleACPIPlatform          1.3.5
com.apple.iokit.IOPCIFamily          2.6
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 8 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420AS, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000

Bump?

Weird behavior x86 and 64x builds

this is a x86 for build which is fine, all values are 0:
in my 64x build, few zeros got an extremly weird value. This only happens in debug mode
anybody any idea why?
Microsoft Certified Solutions Developer - Windows Store Apps Using C#

its when i fetch an object from mobile service client (and using offline sync)
using the debugger shows that this weird value is also in the object
in the database, client and server side are ALL values 0. not all values show this weird behavior
there is almost no code from me.. small wrapper around the mobileserviceclient.
i will try to isolate the problem in small app. any other thought how to debug this?
Microsoft Certified Solutions Developer - Windows Store Apps Using C#

HELP! Sudden weird behavior in Aperture and MobileMe!

So, I am running the latest version of Aperture and have been successfully publishing many albums to mobileme.
I have several external hard drives connected to my computer, and almost all of my image files in aperture are referenced. Lately I have been importing the images from SD cards directly into the aperture library, editing, then relocating the masters so that i would only store the keepers (i went this route because it was unclear to me whether or not originals were also deleted if i deleted referenced files--the pop up wording seems vague to me). I usually back up the new image files on the harddrives manually, and then back up the aperture library to a vault after every major import. I also wait until I have done this to reformat my sd cards.
Of course, this morning, something happened. We had a power outage, and although i have my entire system on UPS units, i had to shut everything down because the batteries only last so long. I did not have time to perform my usual Vault back up. I had a handful of projects with masters in the aperture library (not yet edited and masters relocated). There is one project I do not still have on sd card so that one (and inconvenience for the others) hangs in the balance.
The situation is this: When I rebooted after our power outage (i reiterate that all hard drives as well as the main mac were shut down safely and properly on battery power), all referenced file projects appear normal, but I cannot see any images in the projects with masters stored in the aperture library. The weird part is that if i put the pointer over those projects, i do get the little balloon that tells me how many versions are in each project. It's like aperture knows they are there, but I don't see them. And another weird thing--the REJECTED images from these projects DO appear when I click on the Rejected Smart Album. And the starred images from those projects DO appear when I click on the one-star-or-better smart album. I don't get it.
I also cannot see some of the mobileme galleries within aperture when i select them. When i went on-line to see my gallery, there is some weird behavior...some albums are acting strange, confusing images from other albums, or not accepting my username and password settings (I know they are right), or giving me a different album when I select one to look at.
PLEASE HELP if you can. If I need to, I can always restart from my vault version of the library and reimport last week's stuff from the sd cards, but i'd rather not do that, not to mention there is that one project i will lose.
I'm here waiting for anyone who thinks they can help!
Thanks,
Heather
Message was edited by: heatherperryphoto
Message was edited by: heatherperryphoto

Hi Heather
I was wondering if I was the only one with this problem. Unfortunately I don't have an answer. I'm running Aperture 2 on a MacBook, with my library on an external drive. The problem is increasing; it seems that most (but not all) recent projects are affected, but none that I created before the problem first started.

Remove Navigation panel header scrollbar and Design Bar

Hi guys,
I need your help. I want to remove the Navigation panel header scrollbars and Design Bar from the Navigation Panel.
Please how can I do that.
Looking forward for your response.
Dakata A. Ibrahim

Hi Abdu,
You can change them from the Theme editor under System Administration-> Portal Display. Edit the required theme .
You can change the height and width of the scroll bar images to 0px. Similarly for the design bar also you could do that else you can make the url to design bar to some blank image that coincides with your background color.
Hope this helps,
Regards,
Uma.

Weird behavior in master-detail

Dear Forum,
I need to implement an application but I still have a halting error.
I have this strange problem and I'll try to explain.
I have this masterscreen with search functionality. When I do a search, I get a result. When I now enter the details screen of the second row of the search result and I change the fields on the details screen and do a commit, I get the message that the changes were made successfully, but I see the primary key jump to the value of the primary key from the details of the first row of the search results on the masterscreen.
And when I look at the details of the first row, the changes were made in this details, and NOT in the details in which I needed to make the changes.
And now more weird... I can only reproduce the problem in Internet Explorer and whatever I try, it works correct in Firefox.
So the functionality should work as supposed, as it wouldn't work in Firefox.
Has anyone encountered this problem before or does anyone has a solution or tip to get to the solution?
Your help is much appreciated.
Arjen

Steven,
When I tried to create the logs you requested, I ran up to a different problem, also affecting this behavior. When I repaired this, still the weird behavior took place in Internet Explorer. And in Firefox the problem was solved. So I tried to disable the cache in Internet Explorer. This solved the problem there as well..
So this behavior doesn't happen anymore with the cache disabled, thus solved this problem.
Thanks for the effort anyway.
Arjen

Weird behavior in Classic or not?

It has been a long time since I've needed to use Classic (on 10.4.something) Today I needed to do something that could only be done in classic. I thought I saw some weird behavior so I tried a couple of other classic apps.    All started Classic just fine, brought up their document window and menu bar. But there was no classic desktop under the app's window and while the menu bar showed "finder" as an open application that could be switched to (the right-most menu item) but when I switched to it I got the OS X finder, not a OS 9 one.   Occasionally I can get what looks like a Finder menu bar, but that's on it are the Apple and Help and the app switcher.
Recently I've been playing with Sheepshaver on a Snow Leopard system, which brings up an honest-to-goodness OS 9 desktop.
Now, I am misremembering how Classic works (in effect, no desktop and no finder) or is something wrong. I checked all three of my systems running Tiger and they have the same behavior.   (A G4 -- that will still boot into OS 9, a powerbook G4, and a mac-mini.)
Ted Lee
Minnetonka, MN

OK, I found an article on rebuilding the desktop and it indicated that while there is a file for the OS9 desktop, in the classic environment it is invisible and can only be found through an alias that is created on the OS X desktop. I suspect I've deleted that alias since I didn't have any particular need for it.   The article tells you how to re-create the alias from the terminal. indeed there is a folder there and it is empty. No particular use for it -- if you select Desktop from an OS 9 app you get the OS X desktop.   I can also see why there's no real OS 9 finder -- anything you could have done from it you can do from the OS X finder -- except the "Apple Menu" and that's why that's under the classic icon on the right half of an OS X menu bar. There still is a "rebuild desktop" in the Classic prefs -- I assume that's so you get the right doc/app association in the classic environment, since I don't think OS X understands the classic creator/type info.
So sounds very much like I'm misremembering!
Ted Lee
Minnetonka, MN

Weird behavior in opening Aperture images in Photoshop

I have found a lot of really weird behavior when opening Aperture images in an external editor (in my case, Photoshop, so I'll use PS to refer to it):
1) If the master image is opened in PS, a new version is created when the file is opened, not saved. So quitting PS without saving leaves you with a new version of the file, regardless of whether you actually saved any changes or not.
2) If a version (not the master) is opened in PS, a new version is not created, either on open, or on save. So in other words, changes to that version in PS when saved overwrite that version, and the previous condition of that version is lost (with respect to versioning).
3) If multiple versions of the same image are opened simultaneously in PS, there doesn't seem to be a way to tell the difference between them in PS, except for visually (possibly meta-data, but I haven't checked that, nor would I want to be forced to). The file names of all versions are exactly the same.
I'm looking for feedback from anyone out there who can explain why this isn't completely quacky version control. I've been using version control almost my entire career (as a software programmer) and here's how I have seen almost invariably version control work:
1) New versions of files are always created upon commit, i.e. saving of the file, not on opening a file. (Do not confuse this with working copies, think about what is present in the repository).
2) Opening / editing any file version is never destructive. Any change to that file version that is saved (committed) results in a new version, not an overwrite to the same version.
Aperture's interface basically has combined what traditional version management has represented separately, that being the client and repository views of a project. They are showing all versions of a file simultaneously. This is fine, but I'm really not liking the fact that some changes create new versions, other changes overwrite versions, and one case, merely opening the file creates a new version, whether there are any changes saved or not. In addition, when working with multiple versions in the editor, the file name and/or interface doesn't give any indication of what version you are working with. Easy to say that's the fault of the external editor, but I disagree -- all external editors are going to work with filenames, so Aperture should produce a unique namespace for any file version so that any external tool will be able to distinguish (visually) one file from another.
Is this completely wacky version management, or is it just me?
Brad
Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz Mac OS X (10.4.2) PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MB

Hi Bradley,
Due to the way I personally use Photoshop, I want Aperture to behave as it does.
That's because, with Photoshop, I use layers extensively. Any edits I do (levels, curves, saturation, sharpening) I do on layers. I can delete the layers at any time (or select to show or hide them). Because of this, I actually WANT Aperture to behave the way it does. Once I've done a bunch of edits in Photoshop, if I select again to edit that file in the external editor, I want to work on that specific file (to add another layer, or change one). I don't want another duplicate. I tinkered with this over the weekend, and it worked very nicely for me.
Perhaps you work differently from within Photoshop? Do you ever use layers? If I were to have a bunch of Photoshop "versions," each with 5 layers, I'd have like 5 GB of "versions" for my original 8 MB RAW file, due to the size of PSD files. Yuck

Weird behavior in UCCX 7.0.1 SR05

Hi team,
I've got a weird behavior in a UCCX 7.01 SR05 installation.
All incomming calls which go to an agent who is set "ready" set the agent to state "not ready" and go to queue...
This behavior also occurs with standard script icd.aef.
Had anybody has same behavior in an UCCX 7 installation? Or can anybody help me? I checked my configuration twise and couldn't find
any issue.
Thanks a lot,
Tobias

I've seen this happen before because of a CUCM configuration issue. Check whether the CUCM Calling Search Space for the UCCX CTI ports can call the partition of the agent's extension. My guess is that the call attempts to connect but CUCM will not allow it to go through. UCCX then marks the agent as "Not Ready" and drops the call back in queue.

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo. It's a macbook pro early 2011. I've read that those are having issues, if there's someone i can contact for further information, report the issue since it's getting common or any temporal solution available. Thanks

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

TLF 2/2.1/3 Weird behavior with floating graphics?

Hi guys,
I'm working on a chat application running on RED5 / AS3 and I'm struggling to get my client "UI" working perfectly.
My problem is related to the TL Framework, on every version available.
Basicly, I want to display a picture ( for user messages ) and icons ( for notifications ) on the left side of my lines, like this :
So, I'v been messing around with "float=start", "float=left" and such, but i'm always encountering weird behaviors whenever I scroll or resize my containerController. It's quite easy to reproduce with the following code :
public class Main extends Sprite
          private var controller:ContainerController;
          public function Main():void
                    if (stage) init();
                    else addEventListener(Event.ADDED_TO_STAGE, init);
          private function init(e:Event = null):void
                    stage.scaleMode = StageScaleMode.NO_SCALE;
                    stage.align = StageAlign.TOP_LEFT;
                    removeEventListener(Event.ADDED_TO_STAGE, init);
                    var holder:Sprite = new Sprite();
                    addChild( holder );
                    var tFlow:TextFlow = new TextFlow();
                    for ( var i:int = 0; i < 50; i++ )
                         tFlow.addChild( createLine() );
                    controller = new ContainerController( holder, 400, stage.stageHeight );
                    tFlow.flowComposer.addController( controller );
                    tFlow.flowComposer.updateAllControllers();
                    stage.addEventListener( Event.RESIZE, resizeController );
          private function resizeController( e:Event ):void
                    controller.setCompositionSize( 400, stage.stageHeight );
                    controller.textFlow.flowComposer.updateAllControllers();
          public function createLine( ):DivElement
                    var d:DivElement;
                    var p:ParagraphElement;
                    var im:InlineGraphicElement = new InlineGraphicElement();
                    im.source = new Bitmap( new BitmapData( 16, 16, true, 0x30FF0000 ) ); // 0x30 Alpha
                    im.float = "left";
                    d = new DivElement();
                    d.clearFloats = "both";
                    p = new ParagraphElement();
                    d.addChild( p );
                    p.addChild( im );
                    return d;
Basicly, I'm stacking 50 transparent "floating" elements. It works fine most of time, but if I randomly resize my Flash Player Window, I can get the first "invisible" element to overlap the last "visible" :
It seems to be happening right when the last "floating" element should disappear. Instead, it gets "over" the previous one. It happens upon container resize and scrolls. I'v encountered this issue on lastest 2, 2.1 and 3 TLF builds.
Beside the visual "bug", it also screws up my container.getContentBounds().height calls - which can make scrolling "trembling", as the height gets reajusted.
I'm running out of ideas about how to handle this. This bug appears whenever I use "floating" graphics and I can't think of any other way to display graphics on the left side of my chat-lines.
Maybe someone ran into this very problem and figured out a way to make it work?
Excuse my english, thanks in advance,
Lionel.

Thank you for your report. And I have found the root cause.
In BaseCompose.as
protected function composeFloat(elem:InlineGraphicElement, afterLine:Boolean):Boolean
if (!floatFits && (_curParcel.fitAny || _curParcel.fitsInHeight(totalDepth, int(logicalFloatHeight))) && (!_curLine || _curLine.absoluteStart == floatPosition || afterLine))
                floatFits = true;
The condition of if is true, only when the weird behavior happens. We need to discuss about how to fix it.

URGENT Please help with weird behavior of test suite

Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,

Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support

Weird behavior by APD

Hi Guru's
I am observing very weird behavior in one of the process chain at APD step.APD step is getting failed due to lack of logs and due to this chain status is changed to failure in work-load automation screen.But without my intervention this step finishes successfully by getting logs after few minutes.Now we have to change chain status to success in WLA to run further dependent loads.Could anybody help me out in this aspect to avoid unnecessary change in its status and how it is picking up logs.
Thanks!!!
Kuldeep

Logs not found --> Could it be due to table space issue? Did you have a look at the parameters? Is there a short dump in ST22? Ideal solution would be to fix the logs not found issue. We can also think about work arounds to restart the process chain automatically after the APD finishes successfully. But may be you can work with your basis team to see if it is table space related issue.

What is the diference between pane and panel?

What is the diference between pane and panel?
Thanks.

The panel is the UI part of the VI. It can be divided into several panes which are simply different parts of the same panel, which can have seperate scrollbars, etc.
Try to take over the world!

Scrollbars and panels, weird behavior

Similar Messages

Maybe you are looking for