Scrolling a window within a window

I have had occasion when I get a scrollable window within a window. I can scrol around the outer window but not the inner window. Is there a technique to scrol around the inner window?
Thanks
Wallyjf

I must be stupid. I can not make this work.
Do I spread my two fingers apart or do I move the two fingers in the direction that I want the inner window to move?
Is there a page that I can play with?
Thanks
Wallyjf

Similar Messages

Snagit v10 build 788 - unable to capture input - scrolling active window

Hello,
I use Snagit v10 build 788.
I cannot use the "Scroll Active Window" option on Firefox 4 Beta.
It does not work.
I get the Snagit message : "Unable to capture input".
Using Internet Explorer or on an other PC the Firefox v3.6, the "Scroll Active Window" option of Snagit v10 is working.
How to solve it ?
Thanks
Caius

FIXED!
Guys, you will not believe how easy this is to fix! After hours of frustration I finally discovered a Firefox add-on called '''Screengrab'''. Install Screengrab, then right click in Firefox, choose Save, Complete Page - and you get a perfect scrolled page capture!
Even better, you can open it in Snagit to work on it further (Screengrab saves it as a png)

Problem with Java scrolling text window on Mac OS

The Java scrolling text window created by AWT "TextArea" scrolls in the normal way from the top on Windows, whereas it scrolls from the bottom on the Mac OS. That is, the text file is first displayed from the bottom on Mac, so that the user has to scroll to the top of the file each time a new page is opened, which is a very nuisance. Have you run into this problem and do you know how to over-ride the Mac OS default? Many thanks.

TextAreas suck in general, this has been discussed many time in the forum. As a duct-tape fix, you might play around with setCaretPosition() after inserting your new text. Good luck

Samsung p2270 scrolling and window lag

I have a new 2.8ghz xenon Mac Pro with 6 GB of ram. It's attached to a Samsung P2770HD monitor via a DVI cable.
When I scroll a window in Safari, or drag any window, or even when a new window is opening, it is extremely laggy and redraws the window very slowly. I've tried adjusting all of the monitor settings with no success. I have no options to change in the monitor prefs.
Any advice??

I'm using the same monitor on a macpro with the ATI HD 5770 card. I don't have a problem with moving windows but when I set my resolution to 1920x1080 the image goes off the screen. I can't see any of my icons on the far right or left. Do you have that issue?

Scrolling a window

Is there a way to open a macro in design view and scroll the window to a desired percentage?
in VBA of course
Thanks
50% of programming is coding. The other 90% is debugging

Hi JonWayn,
>> Is there a way to open a macro in design view and scroll the window to a desired percentage?
What do mean by "scroll the window to a desired percentage"? Do you want to open a macro in design view? If so, I think you could try to select the macro object and send the key "CTRL +ENTER" to achieve, some key code like below:
Sub OpenMacroInDesignMode(sMacro As String)
DoCmd.SelectObject acMacro, sMacro, True
'-- CTRL+ENTER will open the macro in design view
SendKeys "^{ENTER}"
End Sub
You could turn to the link below for more information about SendKeys
# SendKeys Statement
https://msdn.microsoft.com/en-us/library/office/gg278655.aspx
If you want to scroll the window to a desired percentage, I am afraid that it is not achievable, you need to scroll the window manually.
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Audio breakup when I scroll a window...

I was listening to some MPEG3 music on my hard drive with Window Media Player 9 whilst browsing the internet when I noticed the sound distorting whenever I used the keyboard cursor keys to scroll down the page. It doesn't happen if I use the mouse scroll wheel or the mouse to drag the bar down!
I'm using the mainboard's onboard sound via the latest Realtek AC'97 audio codecs as they are better than the ones that came with the nVIDIA nForce driver pack.
Can anyone please tell me why the sound breaks up when using the keyboard?

I've just read in PC Gaming Hardware World magazine that the nVIDIA IDE drivers included in their nForce2 driver pack are a bit buggy i.e. not very good and that you should replace it with the Standard IDE driver included with Windows XP so I'm going to see if that resolves the problem. It apparently affects the ability to burn CDs and DVDs too which I've had a few problems with especially with verifying the data.
Thanks for your help!
The weird thing about the sound bug is that if you have the Task Manager open and then scroll the window using the keys the sound plays fine!!! Talk about bizarre...

How do i scroll a list within a window ( such as a safari page) on the ipaf?

On some pages i navigate to, there is a scrollable frame insude the window. Whe i try to scroll, the entire window moves. Is there a way to "anchor" the main window so the interior frme can be scrolled?

Bill Helsabeck wrote:
On some pages i navigate to, there is a scrollable frame insude the window. Whe i try to scroll, the entire window moves. Is there a way to "anchor" the main window so the interior frme can be scrolled?
Try using 2 fingers for scrolling within a frame.
Stedman

How to stop annoying auto scrolling in window

I'm running 10.8.5. Since upgrading to 10.8.5 from 10.6.x, my system has been doing two VERY annoying things.
1. Within a window, if I have a file selected (highlighted), say at the bottom of the window. Then I scroll all the way to the top (not selecting any other file), and the selected file is off screen (can't see it). I would then copy a file from another window to the first window (the file being copied starts with "A" so it should show up where I scrolled to at the top in the first window), once it's finished copying over, the window will automatically scroll down to the file I had selected earlier. Without fail. This actually happens with any other activity being done on my system. Window ALWAYS scroll to the highlighted file where ever you are in the window. This has never happened with 10.6.x or earlier OS X.
2. This one seems to happen randomly. Whenever I select a file to change it's name (doing a single click on the name bar), instead of the file I hit being editable, 10.8.5 would select a random file down the list instead. Making THAT file editable.
Anyone else experience these? Is there a fix, or an option somewhere to turn these ridiculous features off?
I really don't know what Apple is doing these days. But it certainly is no longer the user friendly and reliable system I've used for over 20 years. It's all about glitz and glam, no real functionality for old school power users. Instead of being a unique system like it used to be, it's now just a glorified version of PC. Just costs a lot more.

virajx3006 wrote:
Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
dude check your inbox
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

JTable Flickering when you scroll Browser Window

Hi All,
I am using JTable. I am having this annoying Flickering when I am trying to scroll the Browser Window. For example if I have 4 or 5 table in my page and it will exceed the browser size. If I want to see all the tables, i have scroll down to see. When I scroll, the table is Flickering and it becomes white and then only I am seeing the Table. Some times the whole table is destroyed by the flciering and then i am getting the table. This very annoying problem i have. I am writing all the code to draw the table in "init()" method of my JApplet. Please help me whether any solution is there for this.

This is a bug in Java 1.3 (Bug IDs: 4314208, 4337823), which uses a new fast DirectDraw accelerated scrolling algorithm which sometimes screws up (I think I read it's a thread race condition) and garbles the text. You can switch to another scrolling method, which won't mess up, but will draw slower. Use this code:
myJScrollPane.getViewport().setScrollMode( JViewport.BACKINGSTORE_SCROLL_MODE );In the application I am working on, I have extended the JScrollPane to a new class which tracks all instances of itself within an internal static Vector of WeakReferences, which allows me to change all the scroll modes at once, then I have a user preference so users can switch to the slower mode if they are experiencing problems.
Alternatively, you can turn off Java2D DirectDraw acceleration with a VM paramater when you start your program:
java -Dsun.java2d.noddraw=true {your-app}

Scrolling and windows resizing

Is there a way to turn off the feature where if you scroll up or down with your mouse positioned over a windows title bar it resizes the window. This "feature" works with both a standard mouse using a scrollwheel and also when using a touchpad with two finger scrolling.

The only third party program that I use which modifies the mouse is Sizeup and I have rigorously gone through its setting to determine if it was causing this behaviour. Also the behavior persists even when I shut down sizeup so I don't think it is the cause.
edit:
I would also add that this behaviour only appeared after I upgraded to 10.8. While I do have a lot of third party programs running and alot of them were updated when mountain lion was released so it is theoretically possible that this is behaviour is comeing from an external source I have no idea why any of the other programs I have running would affect window resizing.

Magic Mouse will not scroll in Windows 7 boot camp, but works fine in Mac OS

I have a Magic Mouse that was working fine it would scroll and everything, then one day it just randomly stopped working in my Windows 7 bootcamp partiontion. I went to the Mac OS to see if there was anything wrong with the mouse, but it works fine in the Mac OS. I already made sure to install all available software updates but that doesnt seem to have helped. Any help would be appreciated.
Thank you

My wireless mouse is not recognized by Bootcamp bluetooth.
Have you been able to solve your mouse issue?

Mac Pro - Scrolling/moving windows Really Jerky and delayed....

Not sure what's happeneing here... This is a brand New Machine, with ProTools 8 Installed as the only major program. There are ProTools Cards (HD2) and a BalckMagic Decklink HD Pro.
When ever I open a new windown In Finder, Safari, or any other program, the scrolling function is extremely jerky, delayed, and unusable. Moving a window around on the desktop is the same. Otherwise, computer seems fine. ANy ideas onhow to deal with this? This simply can't be right. Myn Other Mac Pro (2008) works just fine.
Thanks,
Todd A.

Are there updates for BlackMagic or ProTools to be more compatible?
When did you last run Disk Warrior?
Any problem installing and updating software or drivers?
Can you do a clean install or have a backup copy and try?
Last and least desireable, try with just basic hardware and system.
Your 2009 has a later build of OS X that still isn't out publicly. It should and could be used on your old Mac Pro and you could test it there. But your system from the 2008, that won't run properly at all on this system.

Is it possible to disable the magic mouse scrolling in windows 7?

I've partitioned my hard drive with bootcamp to run windows 7 for a handful of games that aren't mac friendly. The problem is that once I installed the drivers to use the magic mouse, the scroll keeps jumping around at inconvenient times while I'm playing which makes it pretty difficult. How can I turn the scrolling off? I like having the scroll on the trackpad, but I only want the left and right click on the mouse.

I use MagicMouse on iMac with Windows 7 running (installed through BootCamp). Got sick of annoying horizontal scrolling. The solution described above has helped me to disable it. Here is what I've done in steps:
1) go to http://www.autohotkey.com/ and download an app (a script editor).
2) Install and run the program - please note that it will not open as it runs in the background
3) Rightclick on the desktop -> choose "New" -> "AutoHotkey Script" (a new script file will be created on the desktop) -> name it as you wish (e.g. "Mouse_HScroll")
4) Rightclick on the file you've just created and choose "Edit Script" from the menu.
5) Add these three lines below existing text in the file:
WheelLeft::return
WheelRight::return
#MaxHotkeysPerInterval 5000
6) Save file
7) Run "Convert .ahk to .exe" program from the package installed earlier and browse the file you've just created, hit ">Convert<" -> .exe file should be created. Run this file -> the scrolling should be disabled now.
7) You may wish to move this file to Start/"Autorun" folder, so it would be launched automatically each time you reboot your Mac/PC.
Hope this helps! Good Luck

Scrolling log window guff

Hi,
I've got an app that executes external processes, monitors the output of each, and puts it in a log window. The problem is, when I append to the contents of the JTextArea, I don't know how to set its preferred size correctly so that the JScrollPane knows how large the TextArea is. I tried using (textArea.getLineCount() * line height), but that doesn't work because word wrap creates more lines than getLineCount() reports -- instead of setting the JTextArea to the proper size, it's always too big or too small (depending on how many lines were wrapped). Here's my code:
//check and update all the log windows.
for(int i=0; i < logWindowUpdater.size(); i++)
 javax.swing.JFrame window = (javax.swing.JFrame)(logWindowUpdater.get(i));
 javax.swing.JScrollPane scroll = (javax.swing.JScrollPane)window.getContentPane().getComponent(0);
 javax.swing.JLabel bgImage = (javax.swing.JLabel)window.getContentPane().getComponent(1);
 javax.swing.JTextArea textArea = (javax.swing.JTextArea)scroll.getViewport().getView();
 java.lang.Process process = (java.lang.Process)buildProcessesVector.get(i);
 try
 String processOutput = new java.lang.String();
 while(process.getInputStream().available() > 0)
 char readByte = (char)process.getInputStream().read();
 processOutput += readByte;
 textArea.append(processOutput);
 //because of word wrap, this doesn't work correctly!
 textArea.setPreferredSize(new java.awt.Dimension(560, textArea.getLineCount()*25));
 scroll.getVerticalScrollBar.setValue(scroll.getVerticalScrollBar.getMaximum());
 catch(java.lang.Exception e)
 e.printStackTrace();
Surely there's a way to do this. It's just a simple, autoscrolling log window. Does anyone have suggestions?
Thanks,
Jake

The problem is that I can't properly set the size (or number of rows and columns) of the JTextArea. You see, it is dynamically updated with the output from a running process, which has some unknown number of lines. I can't set the size or rows/columns without knowing how many "lines" are in the process output, and I can't figure that out because word wrap creates some number of additional rows.
Here's how I create the log window and add the JTextArea:
private void createLogWindow(String title, java.lang.Process process)
 javax.swing.JFrame logWindow = new javax.swing.JFrame();
 logWindow.setSize(600, 400);
 javax.swing.JScrollPane logScroller = new javax.swing.JScrollPane();
 javax.swing.JTextArea textArea = new javax.swing.JTextArea();
 javax.swing.JLabel bgImage = new javax.swing.JLabel();
 logWindow.setTitle(title);
 textArea.setFont(new java.awt.Font("Monospaced", 0, 12));
 textArea.setLineWrap(true);
 textArea.setOpaque(false);
 textArea.setPreferredSize(new java.awt.Dimension(560, 300));
 logScroller.setViewportView(textArea);
 logScroller.setPreferredSize(new java.awt.Dimension(560,300));
 logWindow.getContentPane().add(logScroller);
 logWindow.setVisible(true);
 //add this log window to the vectors so it can be tracked and updated
 logWindowupdater.add(logWindow);
 buildProcessVector.add(process);
}Does that make more sense?
Jake

Scrolling the window

Hi,
I have Web dynpro page with ALV table and I would like to delete the scrolling of the browser window that appears default when the table is bigger then the screen. Later the scroll will have to be only inside the table. Is it possible to delete the scroll bars from the window? Thanks in advance for your help.
Best regards,
Anna

Hi Anna,
I am giving the code to set the Visible rows, so that your requirment is fulfill.
Here i am setting 15 as visible rows. So that it display always 15 rows instead of displaying all at once. if you have less than 15 then it displays some empty lines also. if you have more than that then you will get scroll bar to the Table not for the browser.
I think this will solve your problem.
Code:
*... init TableSettings
data: lr_table_settings type ref to if_salv_wd_table_settings.
lr_table_settings ?= wd_this->r_table.
lr_table_settings->set_visible_row_count( '15' ).
Warm Regards,
Vijay

Scrolling a window within a window

Similar Messages

Maybe you are looking for