Scrolling and page loading is very choppy...i've cleaned out my history, cache, etc..it isn't my computer cause it does not do it in IE

Scrolling has become very frustrating--there is nothing smooth about it..the pages jump so when i try to click on a link, the page jumps and i click on another link that is close by....getting very annoying...there is nothing wrong with my machine cause i tried IE and Chrome and i don't have issues there...also i cleaned out my cache, cookies, history...

Please see [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Similar Messages

Boot and page load very slow after 2nd HD install

Good morning.
I recently added a second slave HD (80 GB with a OS X partition) to my beige G3 MT. I am using the original 9 GB drive as the boot drive. Northing else was changed.
Since that time, the boot time has increased significantly (2-3X pre 2nd drive).
Also, page load times have been increased with the Norton AntiVirus symbol being displayed.
1. What's causing the slow boot? Is the CPU looking at the new drive and applying Norton before the original boot drive?
2. Are there settings in Norton that might help?
3. Is it even worth continuing Norton use for this OS 9.1 machine?
Thanks for your time!

Hi, Bruce. NAV is probably scanning the entire new drive at startup, thus accounting for the major startup slowdown. And no, there's no good reason to have NAV installed at all. Your Mac doesn't need antivirus protection.

Page loading is very slow

Hi,
We are using BAPI to fetch data from R/3, at the time of displaying it on the screen, page load is taking time, and scrolling of page is also very slow.
Can you help me in improving the performance of the page.
Thanks in advance.

Hi
Firstly identify it is a issue with the BAPI side or not. Test the BAPI in R/3 side. If it takes too long, then tune the ABAP code. If it is fine, then try using cache settings at Iview level.
Regards,
Murali.

Slow start and page load on 10.8.5?

I recently upgraded to 10.8.5 from 10.6.8. It now takes several tries to get the system to start, and page loading on the net seems slower. Is this normal?

No.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

Slow FF startup and page load speed

TIP TO IMPROVE SPEED(?): My FF startup and page load speeds increased dramatically when I used the auto feature in Ashampoo WinOptimizer 6 to adjust my internet settings. I've been using the comparable feature in TuneUp Utilities 2009 and FF speed was worse than abysmal. Hope this helps some of you. (You can obtain a trial version from Ashampoo or CNET; actually v7 is out and appears to be even better.)
== This happened ==
Every time Firefox opened
== Always

Gmail only allowed to log into one message or link or folder then ff 3.6.4 freezes.
I have gone back to 5.2 to get it to work yet every time it updates ff freezes. Why is this?
If I reinstall 3.5.2 will I ba able to get an answer to this problem else I may not be able to see what you send me.

TS1367 I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen

I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen

Welcome to Apple Discussions Dathanb
You have posted in the Feedback About New Discussions forum.
As you are a first time poster, you seem to have missed the text at the top of this forum that says:
Please Read This Before Posting Here
If your question concerns a hardware or software technical issue, please do not post in this forum
Go to the main Apple Discussions page, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link. Because your post doesn't indicate was OS you are using on your iMac, I can't give you a link to the most appropriate forum.
Basically, though, the version of TechTool on the AppleCare disks is not compatible with newer versions of OS X and/or Macs (I can't remember which). If you don't get a satisfactory response by posting in the appropriate iMac or OS X forum, I suggest you take your iMac to the geniuses at the Apple Store. You can set up an appointment time for the same day online before you leave home.
Peggy

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix? iMac and Mac Pro Thanks

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
iMac and Mac Pro
Thanks

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

HT1937 i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears The SIM card inserted in this iPhone does not appear to be supported This iPhone is not currently setup to work with carrier you're attempting to use. Please

i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
The SIM card inserted in this iPhone does not appear to be supported
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.

It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone.

HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

See
http://support.apple.com/kb/TS4215

I downloaded alot of music on my iphone. Then i had to opdate it and i lost it all. Is there anyway I can get my musik back and save it at my computer so this does not happen again. Its terrible. :(

Please Help Me !!
I downloaded alot of music on my iphone. Then i had to opdate it and i lost it all. Is there anyway I can get my musik back and save it at my computer so this does not happen again. Its terrible.

See Recover your iTunes library from your iPod or iOS device.
tt2

HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

Hi everybody,
I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
Thanks

Hello:
There was an OS X 10.7 update released a month or so ago that fixed this problem. Run software update.
Barry

Automatic scrolling on page load

Quick question...has anybody ever ran into an issue with a
cfm page where the page loads in scrolled down automatically? If
so, how did you handle it? The page that is doing this for me has a
cfform tag and a few includes on it. It's not really that big of a
deal, but it's a pretty annoying. I have compared my code for the
app that is doing this to several other apps I've created and I see
no significant differences. I don't really want to get into
specifics if possible...just prodding around to see if anyone else
has run into this.
Thanks for the help and feedback!

You wouldn't be able to make your browser scroll directly
with CFML, that would be JavaScript, since JavaScript can mainly
handle client-side functionality e.g. browser scrolling, size,
colours etc.
Maybe it's something to do with settings in your browser? Or,
does the page CFFLUSH? Not sure what effect a progressive output of
a large dataset would do to the page - this shouldn't be a problem
though.
Do you have a dodgy conflict with the mouse and your possible
laptop mouse pad? I know that both of mine work at the same time,
which sometimes messes up scrolling.
Has this problem persisted over several sessions, or just
occurred the once?
Mikey.

Safari extremely slow and pages load with errors

Not sure if this is related to other Safari posts, but when I try to load a page from many sites, including this one, the speed is extremely slow and there are invariably errors reported on the bottom status bar. I'm on a new Mac Pro, and I haven't added any add-ons to Safari or changed system settings. My internet connection is DSL on ethernet, and there are no problems with email or on my old G4 using Explorer 5.1. At this point G4's Explorer is light years faster than Safari on this machine. I'm going to try Mozilla Firefox, but is there any hope for Safari?
Thanks,
Peggy

Hi Peggy
Welcome to Apple Discussions
Try this to speed up Safari.
First, make sure you are not using Rosetta. Go to Safari's info panel (Application folder>Safari.app>Single click>Apple Key I). If Rosetta is selected, uncheck it.
Network Connection
Go to the System Preferences>Network panel
- Location - set up a personal location by clicking on the drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
- Next, click on the "Show" drop down menu and select Network Port Configurations. Only Ethernet ought to be checked. Move it to the top of the list (you can drag it). Select "apply".
- Back to the "Show" menu, depending on your connection select "Ethernet". Click on the TCP panel. There, enter 4.2.2.1 and 4.2.2.2 (separate lines) in the DNS servers box and select "apply".
Creating a personal location, plus adding the DNS codes seems to speed things up. Otherwise, the "automatic" function has a tendency to "search" for available locations.
In the Finder, go to your Utilities folder and select "Terminal". Once the screen is open enter lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal.
Post back

Fired up my first Azure Website to host some virtual tours... ftp uploading and page loads super slow.

I upgraded my plan to BASIC... any idea why FTP upload are so slow? When I go to my pages, they are loading slowly too.

Hi,
First, please have a look at this article to see how to use FTP in azure:
http://blogs.msdn.com/b/kaushal/archive/2014/08/02/microsoft-azure-web-site-connect-to-your-site-via-ftp-and-upload-download-files.aspx, based on your description, the pages loading slowly, this issue only occur in your first time to loading? If yes, I
think it is normal, If you mean the initial request takes long and then any subsequent requests are fast, then that would be because you are hitting .NET apps cold start. Many .NET apps are slow to JIT and load all their .NET requirements, but once everything
is loaded, they are fast. If I misunderstanding, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Qt4 updated to 4.8.7: Slow text scrolling and higher load time.

System is fully upgraded, and i just noticed that every qt4 application has become incredibly slow when using QT_GRAPHICSSYSTEM=native (slow dolphin scrolling, slow konsole scrolling)
It is probably related to text antialiasing, because if i disable subpixel hinting in konsole, it start to scroll fast.
Reverting back to 4.8.6 fixes it.
I want to use native instead of raster because:
1) when used remotely via x2go and ssh, qt apps are very fast using QT_GRAPHICSSYSTEM=native
2) with QT_GRAPHICSSYSTEM=native one is able to retain RGB subpixel hinting even over trasparent windows.
I'm using nvidia-340xx 340.76 with a geforce 9800GT and freetype2-infinality 2.4.12-2 if it matters.
Anybody can help please?
-EDIT
This does not seem to be related to an update of the xorg-server, nor to the graphic driver; i notice the same behaviour when using a remote (fast) vnc connection.
I bet it is a QT4 bug; someone could test please?
Last edited by kokoko3k (2015-06-19 15:56:35)

It is not just the text scrolling under native graphicssystem to be slow.
All qt4 apps with text edit widgets are now slower to open, even with raster graphicssystem.
Gambas3 ide takes 6 seconds to start; on 4.8.6 it starts in 2 seconds here.
Just reported both:
https://bugreports.qt.io/browse/QTBUG-46700
https://bugreports.qt.io/browse/QTBUG-46778
Last edited by kokoko3k (2015-06-19 15:57:14)

Scrolling and page loading is very choppy...i've cleaned out my history, cache, etc..it isn't my computer cause it does not do it in IE

Similar Messages

Maybe you are looking for