Scrolling and searching is seriously delayed

So I had itunes running perfectly on my main desktop computer upstairs with an older version of itunes. I also have a desktop dopwnstairs that had itunes running perfectly as well (this one is reading itunes files wirelessly from the main desktop). So I go to upgrade to 6.0 on my main computer and of course I have issues and itunes would not open. So I did some research and the Lorraine fix did the trick (adding itunes and quicktime to the Norton list). Worked like a charm. So then i go to do the same upgrade on my downstairs computer which is reading wirelessly. I did the Lorraine trick again but on this computer my music library disappeared when opening the new version of itunes 6.0. OK...no big deal. I proceed to load in my music library wirelessly via my main computer. So now I have my library loaded into the downstairs computer but I am having serious problems scrolling and searching on this computer. When i try and scroll it delays and freezes and it takes forever to scroll, so much so that it is unreasonable to use. The weird thing is that the downstairs computer will play songs but I just can't really scroll or search effectively. I never had this problem with the old version of itunes. Any suggestions as to what this might be?
Thanks....Eric

hi Eric!
So now I have my library loaded into the downstairs computer but I am having serious problems scrolling and searching on this computer. When i try and scroll it delays and freezes and it takes forever to scroll, so much so that it is unreasonable to use.
hmmm. check to see if you have any strange compatibility settings checked on the afflicted PC. right-click your itunes desktop icon, select "properties" and go to the Compatibility tab. are any of the boxes there checked? if so, which ones?
investigate the QT compatibility settings too.
another thing we'd better check on is your
b wireless
card. which card are you using?
(asking this, because we've had strange reports of
b old
wireless drivers causing system hangs for some cards, and
b new
drivers causing system hangs for some other cards ... so i'm reluctant to suggest a driver upgrade until we know which kind of card we're dealing with ...)
love, b

Similar Messages

  • Having trouble with momentary delays while scrolling and typing, new problem that seems to be getting worse every day. Mouse?

    Having trouble with momentary delays while scrolling and typing.  It's a new problem that seems to be getting worse every day. Mouse? Internet connection? It's driving me nuts!

    Hi
    Did you find a solution ?
    I have the same problem on my iPhone 4

  • I've just recently updated to the ver 4.0. After the update, I can't select my vertical scroll and any buttons on the search toolbar.

    I've just recently updated to the ver 4.0. After the update, I can't select my vertical scroll and any buttons on the search toolbar. I've tried switching off all the add-ons and running it on safe-mode but the problem still persist. Anybody encountered the same issue here? Any help would be good. Cheers

    Okay. The missing menus at the top of iTunes (in recent versions) can indicate trouble with the Segoe UI fonts on your system. It's a new symptom of a problem that can also cause text to go missing from the Device tab in iTunes.
    Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
    Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
    iTunes 10.1 Missing Text

  • ICal on iPhone scrolls and duplicates

    I have endlessly googled and searched support for this problem, but I can't find anyone else who has it. When I look at my calendar on iPhone 4 in list or day views, the events will start to duplicate before my eyes and the dates will scroll backward and forward. It will keep doing that until I shut down the application. If I try to look at the month view after the problem starts to occur, it shows that I don't have ANY events. I have shut down, restarted and restored from a backup and nothing has fixed it. I'm hesitant to restore it like it's a new iPhone because everything I have is in folders, and I really don't want to spend the time fixing everything again. If anybody knows if that's the only way to fix it, then I'll do it. Anyone else having this issue?

    Gr8fulted,
    Can someone give me a "for Dummies" overview on how to resolve this?
    Try MobileMe Support and select the appropriate country/language, choose "Syncing with MobileMe," select "Troubleshooting MobileMe Sync issues," and then select "Chat Now."
    ;~)

  • WIndow scrolling and refresh issues.

    I am having problems with intermittent window scrolling and refreshing. I noticed it first in Safari but I have confirmed it is happening in other applications as well. Typically I have no problems with window scrolling and refreshing. At times however, it becomes sluggish. For instance, I will be reading a web page and attempt to scroll down and the there will be a delay of approximately one or two seconds before the window updates. This occurs whether I am using the keyboard, trackpad or mouse to scroll. There is no video tearing or graphics artifacts, just a delay followed by an updated window. During this time, moving windows also results in a delay of one or two seconds. Again, there is no tearing or artifacts, the window just appears in it's new positioning seconds later. This unfortunately makes the system near unusable as I can not accurately scroll or position. The problem occurs whether or not I have a significant number of applications and the CPU and memory usage is not abnormal. Restarting solves the problem temporarily but it still returns. Oddly, activating show desktop or show all windows via Expose eliminates the problem for some time as well until it returns later. My system is up to date with 10.5.6.
    Seems like a problem with WindowServer. Has anyone seen this before or have any suggestions?

    Did you ever get an answer to your window scrolling issue. My new PowerMac seems to always have this issue now. (I just moved to the Intel platform from the G4.) Thanks for any help you can give.

  • Is there a way to load a text starting in october 2013 without having to keep scrolling and hitting the load earlier messages button

    Is there a way for me to load my entire text to a certain person without scrolling and scrolling and clocking load earlier messages? I am looking to start from the very beginning in October 2013.

    Sorry, no.
    Edit: if the Oct13 convo has a specific keyword, try using Spotlight to search for it.

  • [svn] 3733: Better scrolling and selection synchronization in List.

    Revision: 3733
    Author: [email protected]
    Date: 2008-10-17 16:32:38 -0700 (Fri, 17 Oct 2008)
    Log Message:
    Better scrolling and selection synchronization in List. Its not perfect, but better then what we had - though not where Halo List is. This is feature work to be done post-MAX.
    Reviewer: Glenn
    Checkintests: Pass
    QA: Yes
    Bug: SDK-17355
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17355
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxList.as

    i had the problems and searched the WHOLE EARTH CATALOG   and didnt found the answer. but i have found it.
    i had changed the appletv video settings to output in 1080p 50hz. if you change it back to 1080p 60hz, then you will have smooth scrolling, and the press and hold effekt and reordering the apps on the homescreen will work again.

  • What is the best way to store and search 2D data

    Hi,
    There is a set of data (~10k records ) in 2D dimension.
    like this :
    Col 1, Col 2, Col3....
    What is the best way to store and search those records ?
    Thanks in advance
    Wilson

    Hi,
    Either userObjet[][] if you know how much data you have, and the data size is fixed, or use a list of lists. E.g. A Vector of Vectors (some will probably say that you should use an ArrayList instead, and that could be the case, but it sounds like you would want to display the data later on, and a DefaultTableModel (for JTables) uses a Vector as data holder).
    Kaj

  • How to read ,compare and search  unicode in we8mswin1252 ?

    HI,
    I having face a trouble while reading and search Unicode for my project module  and its totally dependent  on Unicode data for displaying and retrieve operation in oracle 11g  sql develop.
    code is  as following in ORACLE 11G SQL DEVELOPER
    FLOW IS ....
    1. Procedure
    create or replace PROCEDURE VR_CRONICA_CHECKDUPLICATE
      iv_UFirstName in nvarchar2  DEFAULT NULL,      --Added for Unicode  31-DEc-2014 Jimmy
      iv_UMiddleName in nvarchar2  DEFAULT NULL,   --Added for Unicode  31-DEc-2014 Jimmy
      iv_ULastName in nvarchar2  DEFAULT NULL,      --Added for Unicode  31-DEc-2014 Jimmy
      v_StatusID OUT NUMBER,
      v_Per_ID OUT NUMBER,
      v_Version OUT NUMBER,
      pResult out TYPES.cursortype
    AS
      cur_hdl int;
      --cur_hdl_TotalRecs int;
      strSQL                    VARCHAR2(32767);
        strSQLWhere          VARCHAR2(4000);
       v_UFirstName nvarchar2(50) := iv_UFirstName;
       p_UMiddleName nvarchar2(50) := iv_UMiddleName;
       p_ULastName nvarchar2(50) := iv_ULastName;
        p_UFirstName  nvarchar2(255) :=v_UFirstName;
          iv_Per_ID NUMBER(10,0);
          iv_Version NUMBER(10,0);
    BEGIN
    DBMS_OUTPUT.PUT('VR_PersonRecord_CheckDuplicate' );
    begin
    cur_hdl := dbms_sql.open_cursor;
    --cur_hdl_TotalRecs:=dbms_sql.open_cursor;
    strSQL  := ' ';
    strSQL  :=  strSQL || '
                                    SELECT
                                                    CAST(PER_ID AS number(8,0)) AS PER_ID,
                                                    CAST(Version AS number(8,0)) AS Version,
                                                     INTO
                                                     iv_Per_ID,
                                                     iv_Version
                                   FROM
                                   VitalRecords_Search_CurrentDoc WHERE' ;
                                      IF p_ULastName is not null THEN
                                              BEGIN
                                                  strSQLWhere  := ' trim(UPPER (U_LASTNAME)) = TRIM(UPPER(:p_ULastName ))';
                                              END;
                                      END IF;
                                      IF p_UFirstName is not null THEN
                                                strSQLWhere  :=  strSQLWhere || '
                                                  AND  TRIM(UPPER (U_FIRSTNAME)) = TRIM(UPPER(:p_UFirstName|))';
                                    END if;
                                      IF p_UMiddleName IS NOT NULL THEN
                                            BEGIN
                                                      strSQLWhere  :=  strSQLWhere || '
                                                        AND  TRIM(UPPER (U_MIDDLENAME)) = TRIM(UPPER(:p_UMiddleName))';
                                            end ;
                                      end if ;
                                      v_Per_ID :=  iv_Per_ID;
                                     exception
                                                        when no_data_found then
                                                                                  begin
                                                                                      v_Per_ID:=0;
                                                                                      v_Version:=0;
                                                                                      v_StatusID := 0 ;
                                                                                  end;
                                          end;
    --IF pResult%ISOPEN THEN
    --CLOSE pResult;
    --END IF ;
    open pResult for
                                  select PER_ID  ,
                                              Version  ,
                                              U_FIRSTNAME  ,
                                              U_MIDDLENAME  ,
                                              U_LASTNAME 
                                  from table(readDWSeachPersons1(cur_hdl));
    END;
    .Function
    create or replace FUNCTION READDWSEACHPERSONS1
            (cur_hdl int)
                      RETURN
                                         DWSeachPersonsTypeTableType1
    PIPELINED IS
            PER_ID  NUMBER(10);
            Version  NUMBER(10);
            U_FIRSTNAME NVARCHAR2(500) ;
            U_MIDDLENAME NVARCHAR2(500) ;
            U_LASTNAME NVARCHAR2(500) ;
    BEGIN
          dbms_sql.define_column(cur_hdl, 1, PER_ID);
          dbms_sql.define_column(cur_hdl, 2, Version);
          dbms_sql.define_column(cur_hdl, 3, U_FIRSTNAME   ,500);
          dbms_sql.define_column(cur_hdl, 4, U_MIDDLENAME   ,500);
          dbms_sql.define_column(cur_hdl, 5,  U_LASTNAME   ,500);
      LOOP
      -- fetch a row
               IF dbms_sql.fetch_rows(cur_hdl) > 0 then
                                -- fetch columns from the row
                                   dbms_sql.column_value(cur_hdl, 1, PER_ID);
                                   dbms_sql.column_value(cur_hdl, 2, Version);
                                   dbms_sql.column_value(cur_hdl,  3, U_FIRSTNAME  );
                                   dbms_sql.column_value(cur_hdl,  4, U_MIDDLENAME  );
                                   dbms_sql.column_value(cur_hdl,  5, U_LASTNAME   );
                                           PIPE ROW (DWSeachPersonsType1(PER_ID,Version,U_FIRSTNAME,U_MIDDLENAME,U_LASTNAME));
                         ELSE
                               EXIT;
              END IF;
      END LOOP;
      RETURN;
    END;
    3. Type
    create or replace TYPE DWSeachPersonsType1 AS OBJECT
    PER_ID  NUMBER(10),
    Version  NUMBER(10),
    U_FIRSTNAME NVARCHAR2(500) ,
    U_MIDDLENAME NVARCHAR2(500) ,
    U_LASTNAME NVARCHAR2(500)
    4. TYPE
    create or replace TYPE DWSeachPersonsTypeTableType1 AS TABLE OF DWSeachPersonsType1;
    error is coming like :
    ORA-01003: no statement parsed ORA-06512: at "SYS.DBMS_SQL", line 1450 ORA-06512: at "A0_SJFRM_9AUG_JAYESHB.READDWSEACHPERSONS1", line 16
    so,friends let me sugges solution regarding asap..its very urgent ..

    Hi
    because you have such a hurry, you have done bad design i think Why separating responsibilities of executing SQL in table function that way?
    You cannot have any advantage from separation because it is not general code. SQL is created here and there is function that defines columns to that SQL.
    Developer has no clue what it is executing until searching code for that cursor parameter. That SQL concatenation sucks also.
    That code is not easy to maintain or test or comprehend quickly or at all
    At least to me that is a big mess.
    Suggest that you do that simplest logic as possible and add that missing parse there.

  • Scrolling and Swipe funtionalities have stopped working since update.

    Since I have installed updates on my Mac the magic mouse settings now show just basic settings such as tracking speed, double-click speed and primary mouse button. As the title suggests scrolling and swiping are no longer working.
    I have tried to pair it a few times but nothing changes.
    Ideas?

    wuaw. its done. (:
    i reinstall USB OVERDRIVE and uninstall again. but i do in UTILITIES folder at this time. you should click 'Uninstall USB OVERDRIVE.app' in System Preferences > Utilities folder.

  • Scrolling and rightclicking with magic mouse doesnt  work anymore

    Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

    Also tried the universal access thing. Doesnt work.

  • How to Print a interactive report without  action button and search bar

    Hello every one....
    I am working on printing an interactive report. If there are 20 columns in that report i need to select some columns for printing. For this purpose i used actions button which is in the search bar of the interactive report. But i do not want to get that Actions button and search bar to get printed in the printing page. Can any one give a solution to sort out my problem
    Thanks
    Manoj.

    >
    Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you have updated with your profile with a real handle instead of "886412".
    You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB version and edition
    <li>Web server architecture (EPG, OHS or APEX listener)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    I am working on printing an interactive report. If there are 20 columns in that report i need to select some columns for printing. For this purpose i used actions button which is in the search bar of the interactive report. But i do not want to get that Actions button and search bar to get printed in the printing page. Can any one give a solution to sort out my problemSee +{message:id=2475831}+
    Always search the forum thoroughly before posting a question: 98% of questions (like this one) have been answered before.

  • When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. How can I resolve this?

    Question
    When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. When I swap to private browsing firefox allows me to anter the website address directly into the location bar - but this is a slow [prcess to swap back and forth - also by dint of using private browsing I loose my website information.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How can I animate my sprite to run on scroll and stop when scrolling stops?

    I appreciate everyones help so far.
    I want my illustration of a man to "walk" through my composition as the user scrolls through it.
    I have a sprite created and have made it loop. What sort of code do I need to write to get it to move only on scroll and stop off scroll?
    Thank you guys so much!
    Johnathan

    Hi,
    Thank you for your post.
    Please check the following tutorials for scrolling effects in edge animate.
    http://www.heathrowe.com/adobe-edge-animate-simple-scrollbar-symbols/
    http://www.adobe.com/inspire/2014/01/parallax-edge-animate.html
    Regards,
    Devendra

  • Spotlight searching no longer working - indexing and search disabled.

    I've been searching the web and tried everything:
    Server 10.5.8
    In Server Admin - the attached drive is a SharePoint with Spotlight search on.
    I've used mdutil to enable Spotlight.
    I've checked permissions.
    I can search the Boot Drive. I can't search the attached drive.
    mdutil returns indexing and search disabled when used to turn it on.
    very frustrating.
    Anyone out there have a clue?
    Thanks,
    Mark

    HI James,
    Open System Preferences/Spotlight and click the Privacy tab. Where you see; Delete any locations listed, Quit System Preferences and restart your Mac and see if you can use Spotlight.
    Spotlight Tips
    Spotlight: How to re-index folders or volumes
    Carolyn

Maybe you are looking for