Scrolling down and using links to anchors aren't in sync

This video shows a site I'm creating.  I start in design mode.  Then I click to preview.  As I Scroll down and the page stops too soon.  When I use the links to anchors it goes all the way down.  How can I get the page to work the same when scrolling as it does when using links to anchors?
I noticed that when I use the links to anchors the bottom portion of the menu gets pushed down a couple of inches.  That seems to be the problem.  Why does using anchors do this and how can I fix it?

You want to precompose your stills and the track mattes together.  The composition should look like the stills with a rounded rectangle border.  Then animate the composition.

Similar Messages

  • Question when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    Question
    when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    See this. <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    Question
    When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    See this. <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • Cant Scroll Down And Up - Safari For Windows

    Hi guys, I downloaded Safari on my Windows and it's not working so good with scroll down and up, the Safari just don't do it

    Better to use IE or Chrome as Apple as dropped support for Safari for Windows > Apple apparently kills Windows PC support in Safari

  • I see google search results, scroll down and they vanish. Why?

    All of a sudden when I am using Firefox I get a list of Google search results, scroll down and poof I see only a blank page. What's going on?

    Hello jpachner,
    Does this happen only in Google or have you noticed it any other web pages? Most of these issues could be because of some plugins or configuration changes.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Mac: Hold the '''option''' key while starting Firefox.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, quit the Firefox (not just closing the window) and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • I currently own and use Photoshop Elements 9, which does not sync at all with my Adobe Revel account and library.  Is Photoshop Elements 13 able to be set to sync automatically with a Revel library? Thank you.

    I currently own and use Photoshop Elements 9, which does not sync at all with my Revel library.  Is Elements 13 able to be set to sync automatically with a Revel library?
    Thank you.

    I currently own and use Photoshop Elements 9, which does not sync at all with my Revel library.  Is Elements 13 able to be set to sync automatically with a Revel library?
    Thank you.

  • Previously, I was able to type part of a word and all of my prior searches would be listed, such that I was able to scroll down and select it. Now I cannot. Why

    It's quite simple. A very useful feature in Firefox had been typing a search item into the white box on Mozilla's start page, where it would remain for a long while. I then would be able to just type in a few letters of the prior search to see it listed below, where I could tab down and select it. Very useful when you search a topic multiple times, or over several days (or longer). A great time saver, and memory assistant.
    Two weeks ago, my desktop computer suddenly stopped doing that, and instead began listing suggested searches, and stopped displaying any of my prior searches, regardless of topic. The look of the font also changed in the bargain.
    Then today, my laptop did the same thing for no apparent reason. All of those earlier search topics are just Gone. I am forced to recall them from memory, or go through the initial canvasing I did to find them in the first place: a great time waster.
    Both computers have Windows-7. The laptop 32-bit home and the desktop 64-bit professional.
    What happened to my search topics, and how can I reset it back the way it was? Also, why am I getting Google-like prompts for topics instead of what I want? Previously, I did not get anything until I pressed enter to start the search.
    Thank you,
    Brian

    In current Firefox releases the search bar on the about:home page and the about:newtab page have an autocomplete=off attribute that prevents Firefox from saving form data and now show search suggestions just like you get on the regular Google search page.

  • What's right sequence of defining and using link in RF?

    Hi all!
    I read many informaniton about using links in RF but I not so clear understood what's right sequence of using link. For example I want refer user to some resource trough URL.
    - In content manager I tell that(resource) is link
    - and in getLinkdescriptor I return: return new EPAMLink();
    - class EPAMLink
    public class EPAMLink implements ILinkDescriptor {
    com.sap.netweaver.bc.rf.common.namespace.ILinkDescriptor#getLinkType()
         public LinkType getLinkType() {
              return LinkType.EXTERNAL_STATIC;
         public IRid getTargetRid() {
              return null;
         public IAbsoluteUri getTargetUri() {
              EPAMuriReference simpleURI = new EPAMuriReference();
              simpleURI.appendPath("www.google.ru");
              EPAMuriObsolute uri = new EPAMuriObsolute();
              uri.resolve(simpleURI);
              return uri;
    but repository return me some error and I don't know what's rong...
    Maybe you can get me some very simple example like my.

    Hi,
    When ever u load the masterdata then it has to be activated so that the data will be available for the reporting. The Attribute change run will does the same thing. This will be applied to the Attributes and Hierarchies.
    for creation of process chains u can refer the link..
    follow the steps which is given by me..
    Re: Process chain in Generic extracter
    and refer these also..
    http://help.sap.com/saphelp_bw32/helpdata/en/65/163d3873130057e10000009b38f842/content.htm
    http://help.sap.com/saphelp_bw32/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
    And u can refer some of the links in help.sap.com
    Regards-
    MM
    Dont forget to assign points if it helps, it is the right way to say thanks.
    Message was edited by: vishnuC

  • All my pdf files are very slow to download, scroll down and/or read.

    I am having difficulties opening any pdf files as it is very slow, does not scroll down easily and just plain cumbersome.  Does anyone have any suggestions on how to fix this?  Additionally, as soon as I want to open the file, the fan on the cpu starts.  I am not sure if they are related, but it just happens all the time.  Any help is greatly appreciated.
    Sharam

    Have you verified speed via speedtest.net ?
    Have you checked at different times?
    Check istumbler or netstumbler to verify interference
    Make sure you are on your ISPs DNS (settings - network - configure DNS - automatic)

  • Flash to iPad tutorials and useful links

    Hi, I really appreciate the help I've had so far from the people on this forum.
    I'm a designer, gradually learning AS3. I've written some tutorials and compiled all the useful links I've found in one place.
    It's my findings so far and should be useful for Flash people getting started on tablet dev. I've been experimenting so much
    with code and performance on the iPad that I haven't even finished my own apps yet - I better get on with it now!
    Matt
    http://www.mattwasser.co.uk/articles.html

    Good! Add more tricky tutorials

  • MY Iphone4s is frozen up and won't let me scroll down and is reading me off everything i touch and making me double click to get anything to work. Help!

    Help!
    My iphone4s is frozen up and won't let me scroll down to the accessibilty tab or anything and is reading me off everything that it is doing. I also have to double everything to get it to work (scrolling with a finger can't happen right now). Any advice would be appreciated!

    try the re-boot hold on/off button while holding the home button and wait for the apple to appear then let go of both buttons

  • Mighty Mouse only scrolls down and to side

    It was working fine, then I was told to reboot after some webobjects update or something like that. Now it won't scroll up. It's clicking and not gummed up, and it was working seconds before the reboot. Anyone run into anything similar? I dunno if I have a mouse driver cdrom for it, as I got it for Xmas and tossed all packaging and it worked right off the bat in my iBook so... any suggestions? I can hunt down the packaging maybe, or if they have drivers online, maybe the driver just got pooched a little. If anything, this will help the next person who has this problem when I do find a solution.

    I just figured it out. There was some gunk inside there. It's weird because it was working before the update reboot. Must have just been too much and a coincidence. I found the gunk when I accidentally pushed down while scrolling up and it forced some of it out. It's work now. That's good info to remember in the future since I still can't find my driver CD. Thanks!

  • Sharepoint Tutorials and useful links

    Hello,
    I am beginner in Sharepoint (just started learning from two weeks) , I am searching for sharepoint  tutorials with complete concepts and examples and any website links which provides complete understanding about sharepoint.
    Suggest any tutorials and website links.
    Regards
    Neenu

    Perhaps you may find it easy to first establish fundamental concepts and apply these via code. Following are some of the links which will give you good understanding. The resources mentioned are all free of charge.
    Microsoft SharePoint Developer Site (Tutorials + Hands on Lab )
    http://www.microsoft.com/click/sharepointdeveloper/html/Default.html
    SharePoint Developer Screencasts
    http://msdn.microsoft.com/en-us/office/aa905382.aspx
    SharePoint Technet Magazine (Relatively advance topics , hard to find else where in similar capacity)
    http://technet.microsoft.com/en-us/magazine/cc135961.aspx
    SharePoint MSDN Magazine (Solid material for developing deeper understanding)
    http://msdn.microsoft.com/en-us/magazine/ee532094.aspx?sdmr=sharepoint&sdmi=topics
    http://razi.spaces.live.com/

  • Premiere CS5 and dynamic link with Affect effects doesn't "sync"

    Hi guys, having issues with Pr and Ae CS5 using the dynamic link. I haven't got massive experience using aftereffects, i mainly edit. I doing VFX for a short film ( i know right, deep end..) Its a hand held combat scene.
    I'm using action essentials 2 for muzzle flash and explosions. And i'm noticing that when a do tracking (manually, "track motion" doesn't work, due to the shaky camera movement) in After effects, the muzzle flashes are in place and looks great
    but when i go back to Premiere to view the clip, its not hitting the same marks in every frame. I export the clip out of Premiere and still the same issue.
    example of me manually tracking or adding keyframes for position in after effects.
    After effects still.                                                                                                     Premiere still. See how the flashes are in the sky.
    Look for the two muzzle flashes up the top right, on the ridge line.
    The footage is AVCHD .MTS files for a Panasonic GH2 PAL
    Here's a link to the clip, notice that same of the flashes coming out of the actor's gun isn't in the right positon also.
    http://vimeo.com/32722285
    Password: war
    My computer specs
    Cheers Aaron

    Glitchdog wrote:
    We are just shifing to PP from another editor and have only used PP to AE for color correction tests w/Color Finesse (a plugin in AE). My only experinece with dynamic link is in this way. Personally I find it very cumbersome. So take this with a grain of salt, but if we do other work in AE (we have an intern working on a 1.5 min AE animation) I will render it out in AE to ProRes HQ or 4444 if I need an alpha channel (or similar codec) and drag it into my project folder in PP.
    You should do yourself a favor (Not meant with disrespect) and take a few hours and REALLY get down and dirty with Dynamic Link between PP and AE.
    I use it all the time and it litterally saves me 10+ hours of work on EACH project which is typical between 70 and 300 clips.
    In fact, I dont know how I'd do withouth DL.
    At first it seems cumbersome, yes. But that is only until you get to know it...
    I will cut the whole project in PP. Then save it.
    Then in AE, I'll choose "Import PP Project " --- That will open my whole PP project in AE on SEPERATE layers (One layer per Clip).. Ready to CC.
    I dont have to render a thing from PP.
    If I need to, I'll use the AE Script "Pre Compose" to make an individual composition of each layer.
    AE is just about the greatest app I have EVER seen on ANY computer ! Hands Down
    Does not get ANY faster than that.

Maybe you are looking for

  • Still can't get itunes to read my cds

    I was just curious if anyone has found a fix for this problem. I posted about this months ago and yet the newest version of itunes still gives me the same issue. When I put in a cd to either of my drives itunes usually only recognizes a couple of tra

  • Link to a document - can't edit

    Hi Folks, We are in the midst of setting up a document center for our BPM docs. We have a few main folders with the actual documents uploaded and we have a bunch of other folders that i have created links to the documents in the main folders. here ar

  • How to make re-usable bank of LED indicators?

    Hi All, My toplevel Labview GUI needs to have several banks of LED indicators, e.g. 6 rows of 8.  How can I make a bank or the entire 48 LEDs a sub-vi?  I tried making a sub-vi, but the LEDs on it do not appear on the main vi front panel when I add i

  • Mail sent from android phone is not appearing in Apple Mail

    Hi all. I have an android phone and it sends and retrieves mail from my .mac address (yup still got it) just fine. The problem is that sent mail in Apple Mail (osx 10.7.5) on my MacPro indicates that there was a response with its little arrow, but cl

  • Indesign CS6 Problems with OS X Services

    With Indesign CS5.5, services work, but not in CS6 on Snow Leopard. What I mean is, if you select some text (in my case Tex text), go to the Indesign menu, select Services, then select something like Typeset LaTex Text, Indesign says the service cann