Scrolling Header works in Visual Studio but not on Report Server 2008

2008 R2 Reporting Services. My scrolling header works in Visual Studio but not when deployed to the Report Server and viewed in IE 9. I have read most every post on this issue and can't find a solution. I have the fixed data properties
set correctly. Any suggestions?
Help appreciated!
Linda

Hi Linda,
As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
HTH,
Ram
Please vote as helpful or mark as answer, if it helps

Similar Messages

SSIS package works in Visual Studio but not as a scheduled Job.

I have a SSIS package that takes some CSVs and Excel documents and imports the data into a database. The CSVs and Excel document come from outside agencies so I have no control over them. I have successfully created and ran the SSIS package in
BIDS (Visual Studio) However, when I try to run it as a scheduled job on the SQL server I get the following error.
Source: Import Brazos CSV data Brazos Co CSV [1] Description: Data conversion failed. The data conversion for column "offDescription" returned status value 4 and status text "Text was truncated or one or more characters had no
match in the target code page."
The column is set to ignore on truncation in the data flow source.
Any suggestions would be appreciated.
Thanks
KJ
Kevin Joyner

Hi Kjoyner96,
The error usually occurs due to the data conversion between non-Unicode and Unicode characters. According to your description, the data type of the Output Columns of the Flat File Source should be DT_STR. If the source flat file uses Unicode encoding and
contains Unicode characters, the data conversion from DT_WSTR to DT_STR will fail. So, I guess the source file in your Dev environment doesn’t have Unicode characters, while the source file on the SSIS server has Unicode characters. If this is the case, open
the Advanced Editor for the Flat File Source, switch to the Input and Output Columns Properties tab, and change the data type of the Output columns from DT_STR to DT_WSTR. In this condition, the Data Conversion Transformation is not necessary.
Regards,
Mike Yin
TechNet Community Support

Report works on Visual Studio but don't on server

Hi everybody.
I'm using Reporting Server link created a report and the dataset uses a expression based query as we can see:
="SELECT a.bug_id AS Caso, c.name AS 'Nome Projeto', e.realname AS 'Atribuído a', b.version AS 'Versão', b.target_version AS 'Previsto para a versão', b.fixed_in_version AS 'Corrigido na versão', d.value AS RDI, CASE b.status WHEN 10 THEN
'Novo' WHEN 20 THEN 'Retorno' WHEN 30 THEN 'Admitido' WHEN 40 THEN 'Confirmado' WHEN 50 THEN 'Atribuído' WHEN 80 THEN 'Resolvido' WHEN 90 THEN 'Fechado' END AS status, FROM_UNIXTIME(last_updated, '%d-%m-%Y') AS DATA, CASE WHEN locate('.', c.name) THEN LEFT(c.name,
locate('.',c.name) - 1) ELSE c.name END AS ProjetoPai FROM mantis_bug_history_table a LEFT OUTER JOIN mantis_bug_table b ON a.bug_id = b.id LEFT OUTER JOIN mantis_project_table c ON b.project_id = c.id LEFT OUTER JOIN mantis_custom_field_string_table
d ON a.bug_id = d .bug_id, mantis_user_table e wHERE (b.handler_id = e.id OR b.handler_id = 0) AND LEFT(c.name, locate('.', c.name) - 1) IN ('" & join(Parameters!ProjetoPai.Value,"','") & "') AND c.name IN ('"
& join(Parameters!ProjetoFilho.Value,"','") & "') AND last_updated BETWEEN " & Parameters!Parameter1.Value & " AND " & Parameters!Parameter2.Value & " AND CASE '" & Parameters!Tipo.Value
& "' WHEN 'Todos' THEN (d.value LIKE '%RDI%' OR d.value LIKE '%RDP%' OR d.value LIKE '%TDR%') WHEN '%RDI%' THEN d.value LIKE '%RDI%' WHEN '%RDP%' THEN d.value LIKE '%RDP%' WHEN '%TDR%' THEN d.value LIKE '%TDR%' END and (b.target_version in ('"
& join(Parameters!PrevistoVersao.Value,"' , '") & "') or (b.target_version is null)) and (b.fixed_in_version in ('" & join(Parameters!EntregueVersao.Value,"' , '") & "') or (b.fixed_in_version is null)) GROUP
BY a.bug_id ORDER BY c.name ASC "
The report works great on Visual Studio preview but when I deploy the report, it doesn't work on server. When I click to generate the report based on parameters, it simply shows nothing.
Can anybody help?
Thanks a lot.

Hi Gabriel,
According to your description, it seems that the reason why you using expression based query is that you want to filter values from a multiple parameter. If in this case, I suggest you can refer to the following queries:
Change the query:
c.name IN ('" & join(Parameters!ProjetoFilho.Value,"','") & "') AND last_updated BETWEEN " & Parameters!Parameter1.Value & " AND " & Parameters!Parameter2.Value & "
To
c.name IN (@ProjetoFilho) AND last_updated BETWEEN @Parameter1 AND @Parameter2
We can use the above format to change the all query, then directly use T-SQL query as the dataset query. Deploy the report to report server to check the issue again.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks.

Scroll script works in Flash 6, but not in 9

I have a simple scroller script that works fine for scrolling
a movieclip in Flash 6, but when I publish in anything later, it no
longer scrolls. Both are set to AS2. Is there an obvious reason
that anyone can see of why this should be? When I test the script
syntax in the actions panel, it says there are no errors in the
script. By tracing I can see that there's no trouble with targeting
the up and down buttons or scroll slider, and the slider still
drags, but the content MC doesn't move as it should. Thank you very
much for your help, in advance. Here's the script, in case the
answer isn't obvious from the description:

You were right! It works now, even as posted above. I just
remembered I had fixed an upper/lower case inconsistency just for
neatness since I last tested, never thinking that would fix the
problem! I just tested again and to my surprise, it works great. I
guess neatness does count!!! Thanks again, kglad!

Upload files from my app works fine in JDev but NOT on app server???

i guys,
I'm using jdeve 10.1.2. and adf bc's. So here's my problem:
In my application i need to allow for the upload of files from user's computers. This works perfectly fine from jdeveloper but when i deploy my application on the application server i get the following error:
JBO-26041: Failed to post data to database during "Insert": SQL Statement "D:\TrademarkTestData\TrademarkunitTestData.xls (The system cannot find the path specified)".
D:\TrademarkTestData\TrademarkunitTestData.xls (The system cannot find the path specified)
For some reason the system cannot find the path. This is most frustrating as it works perfectly fine when run from jdeveloper.
Any ideas would be most welcome.
Thanks in advance,
Newbe

Hi Frank,
Thanks for the response. I've consulted with our server guy and he says that there are no read/write privileges. Jdev is not on the server.
I'm really stumped by this so if you have any ideas, I'd really appreciate it.
Happr New Year to you,
Newbe.

ImportDataFile method works in Hyperion Studio but not in iHTML environent

Hi,
I want to read file to Section, while it works in studio:
var scriptVar = ActiveDocument.Sections.ImportDataFile(sectionName , 1);
but it does not in iHTML workspace. I think it can't find uploaded files to be imported, but how to get the proper path to the files?
Im importing text files to the same folder as bqy file.
regards,
Paul

I am not sure (never seen it myself) but at the very least I suppose the windows account which runs the core / reporting services must have access to the path you specify for the import. Try not to use a drivemapping but the full UNC. Good luck Detlev

Fixed header working fine for desktop but not for windows phone

I have my website in asp.net with master page. I have used below css for header div of my website to make it fixed.
.header{
z-index: 3001;
position:fixed;
top:0px;left:0px;
background-color: white;
width:100%;height:150px;
This is working fine for desktop. But on mobile, I can only see my 50% of width of the header. On the right side of 50%, nothing is cmg. As in just white background is cmg. On the right side, I have a button which when I click is working. To say, controls are
not visible but they are working if u manage to click at the exact place. Any fix for this?
I want to add that this problem is coming only in windows phone. So need fix for that.

Hi User1508372,
The
Developing for Windows Phone forum is for developers to discuss writing Windows Phone apps, not for writing web sites targeting Windows Phone IE.
My guess here is that your site may be running into a compatibility mode or different versions of IE on desktop and on Windows Phone, but you don't provide enough information about which versions of IE you are using. Windows Phone 8 uses IE 10 (similar to
Windows 8).
The folks in the
Windows Phone IT Pro forums are likely to know more about the Windows Phone IE specifics, and the folks in the IE or ASP.Net forums will know more about how to target your HTML for different versions.
--Rob

Jsp works in my tomcat but not in school server

Using netbeans 5.5.1 and it has tomcat 5.5.17. My jsp page works fine when I use it on my computer but when I copy it to my school server(tomcat 5.5) it bugs when trying to contact oracle jdbc database.
Whats wrong?
Gives this error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Exception in JSP: /index.jsp:35
32:
33:
34:
35: <%=db.opentables()%>
36:
37:
38:
Stacktrace:
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:506)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:395)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     sun.reflect.GeneratedMethodAccessor150.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
root cause
java.security.AccessControlException: access denied (java.net.SocketPermission [MY HOSTNAME HERE] resolve)
     java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     java.security.AccessController.checkPermission(AccessController.java:427)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     java.lang.SecurityManager.checkConnect(SecurityManager.java:1031)
     java.net.InetAddress.getAllByName0(InetAddress.java:1117)
     java.net.InetAddress.getAllByName0(InetAddress.java:1098)
     java.net.InetAddress.getAllByName(InetAddress.java:1061)
     java.net.InetAddress.getByName(InetAddress.java:958)
     java.net.InetSocketAddress.<init>(InetSocketAddress.java:124)
     java.net.Socket.<init>(Socket.java:179)
     oracle.net.nt.TcpNTAdapter.connect(Unknown Source)
     oracle.net.nt.ConnOption.connect(Unknown Source)
     oracle.net.nt.ConnStrategy.execute(Unknown Source)
     oracle.net.resolver.AddrResolution.resolveAndExecute(Unknown Source)
     oracle.net.ns.NSProtocol.establishConnection(Unknown Source)
     oracle.net.ns.NSProtocol.connect(Unknown Source)
     oracle.jdbc.ttc7.TTC7Protocol.connect(TTC7Protocol.java:1764)
     oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:215)
     oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:371)
     oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:551)
     oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:351)
     java.sql.DriverManager.getConnection(DriverManager.java:525)
     java.sql.DriverManager.getConnection(DriverManager.java:171)
     MYCLASS.Database.opentables(Database.java:131)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:86)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     sun.reflect.GeneratedMethodAccessor150.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5 logs.
Apache Tomcat/5.5
Edited by: panupanu on Dec 13, 2007 6:04 AM

duffymo wrote:
Is the machine that you ran this simple java class on the same one where you're >deploying the web app?Same machine where my sql connections bug. I just copypasted it into a file in tomcat5.5/webapps directory and then compiled it and used it from there. I used it from command line.
duffymo wrote:
how well do you know jsps, tomcat, and web apps? sure it's deployed properly? if you >put in a simple jsp and invoked it via tomcat, would you be able to do it?Dont know jsps well. :) Essentially my jspservlet thingie works normally on my computer through my tomcat and on other computers which have netbeans etc... It compiles .war file and ive copied that .war file to the target server's tomcat webapps directory, then when I access the website of my jspservlet tomcat unpacks it and shows my jsp pages normally if they have no sql components. So at least jsp pages are working... :)
"minor modifications"? sure those are right? you wouldn't be the first programmer to fool >themselves by saying "it's the same code - except for X."
try you "minor modifications" on the command line, too.First I used with main on command line, then removed main etc... and included it into my project.

Commit working in embedded OC4J but not in Application Server 10g

Hi all
i am creating an application using Jdeveloper 9051+adf+uix.
here in a form i have a Create,Delete button and a commit button. after creating or deleting a row , i press commit button and it works fine in embedded OC4J.
But after deploying this application on Oracle Application Server 10g , create and delete buttons are working (means data in form is getting submitted) but commit button is not working (commit button is enabled but data is not getting commited in the table.) after pressing the commit button the form is coming back to its previous position and the commit button is yet enabled. if i presses it second time then button goes disabled but data is not commited at all.
Please provide me solution to this problem.
Thanks

Hi Brenden
Thanks for reply
in the application log file it is showing the following exception-
08/07/01 16:51:29 mail_utility_app: Servlet error
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.xml.parser.v2.XMLDOMException, msg=cannot add a node belonging
to a different document
at oracle.jbo.server.Serializer.passivate(Serializer.java:189)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:290)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:4587)
at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:4479)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:6818)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3886)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2131)
at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1211)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
at oracle.adf.model.bc4j.DCJboDataControl.releaseApplicationModule(DCJboDataControl.java:1340)
at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1198)
at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:289)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:238)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
i have only one entity and one view object. there is no different document as it is shown in the exception.
Thanks

Processbuilder works from command line but not on deployment server

I need to deploy my code on a 10g oc4j Oracle server. When I ssh into the server and run the following code, it works:
import java.util.*;
import java.io.*;
public class Launcher {
public static void main(String args[]) throws IOException {
String url = "http://www.ebay.com";
String[] commands = {"/bin/sh", "-c", "/opt/sfw/bin/firefox ", url, "-width", "1600", "-height", "1200", ":5"};
ProcessBuilder pb = new ProcessBuilder(commands);
env.put( "DISPLAY", ":5" );
Process process = pb.start();
It launches firefox and I can see the process running when I use "ps -ef | grep firefox". Firefox runs in a virtual frame buffer since this is a headless server. Originally I had problems just getting this code working by itself, but now it works fine.
However when I deploy the exact same code via Oracle application server, it doesn't do anything. Not only do no processes show up but I have added different output statements into this code and have verified that firefox never launches. However no error is ever thrown either, even when I just test for generic Exceptions. So any ideas on what I can do to get this running?

Caffeine0001 wrote:
sabre150 wrote:
Solerous wrote:
Also, I do handle the stdIn and stdOut in the code. I was trying to pair down the code in my inclusion of it here to just give the bear minimum for running it. Here is my code for handling it if you'd like to see it:
InputStream is = process.getInputStream();
     InputStreamReader isr = new InputStreamReader(is);
     BufferedReader br = new BufferedReader(isr);
     String line;
     System.out.printf("Output of running %s is:",
     Arrays.toString(commands));
     while ((line = br.readLine()) != null) {
     System.out.println(line);
     }I don't see stderr being handled and your command array is still wrong.
Edited by: sabre150 on Dec 10, 2008 4:48 PM
If he were to call [ProcessBuilder.redirectErrorStream(true)|http://java.sun.com/j2se/1.5.0/docs/api/java/lang/ProcessBuilder.html#redirectErrorStream(boolean)] then all he has to handle is stdout.
True, then that would be just one more important thing that the OP failed to post in his "*exact* same code" .

FLVplayback skin works in HTML locally, but not on a server.

I am developing a Flash based website that plays a video file using the FLVplayback component. Everything works fine locally, the paths are all relative and everything (index.html, the SWF with the FLVplayback and the skin SWF) is all in the same place. I have checked my paths and am certain they are correct.
once I upload everything to a server, my skin goes missing. Even though the video plays.
unusual? yes.
frusterating? yes.
solution? none in sight.
(sigh) I hope someone can help me here.
- Jeremy

Hi Linda,
As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
HTH,
Ram
Please vote as helpful or mark as answer, if it helps

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

Hey thanx for the help, it worked like a charm.
I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
Cheers again..

Visual Studio UI not refreshing

Hello,
I have downloaded webinstaller of Microsoft Visual Studio Ultimate 2013 32-bit (English) from dreamspark and installed it. However, after installation the UI of Visual Studio was not refreshing properly.
I had gray background, moving mouse over "hidden" items made them reappear if they had special effect while hovering, like bolding text. Also some links that are "hidden" in start page are still active -> if I hover my mouse on it,
the cursor will change. Resizing window will show everything as it supposed to but will still leave window "unactive". Clicking, writing etc does not update on my screen until I resize window again. Menus (File, Edit..) are working properly.
I uninstalled my Visual Studio and installed it again from image this time. It was working few times but now it is yet again unresponsive. I noticed that resizing the window will make it to refresh and show the content as it supposed to. I have also
tried to install Update 1, that didn't make any changes.
I have latest Windows updates. I have Windows 7 Pro SP1 x64. Visual Studio version: 12.0.30110.00 Update 1. .NET Framework 4.5.50938.
Any idea how to fix this?
(I am unable to add images or links, I will add some screenshots when my account is verified)

Hi,
Thank you for your detailed information, now I understand your issue.
I doubt whether there is anything wrong with your OS or user profile.
You may try the following steps to do a simple test:
1. Create a new user account and run VS. If you can run without problem. Your user profile is corrupt and you have to create a new account and copy current user info to it.
http://windows.microsoft.com/en-IN/windows7/fix-a-corrupted-user-profile It is for Win 7
2. Do some file check or repair on your OS. Such as Sfc /scannow http://support.microsoft.com/kb/929833 The same problem.
If possible, I recommend cleaning your OS and reinstall VS to check the result.
And as I know recently some Windows Updates caused any issues in VS2010. In order to check whether they can cause your issue, please uninstall related updates such as KB2898869 if you have them to check whether it can help:
http://visualstudioextensions.vlasovstudio.com/2014/02/13/visual-studio-2010-macros-stop-working-after-february-2014-windows-update/
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
@Crystal Zhu
I checked and THOROUGHLY read the link about fixing a corrupt user profile and it fixed my VS 2013 problem, however, I cannot seem to copy any of my data from my first (corrupt) profile to my second and fresh user profile. I have also tried another way of
doing this but I get the same outcome.
It seems as if, when I select all my files in the C:\Users\My Profile section, it will copy to clipboard yet, it says it can paste but when I attempt to paste, it does not let me, or at least does not seem to be pasting. Nothing changes or occurs. Could
this be a win 8.1 security feature? (Windows 8.1 is my current running OS). Please answer or quote with help.
-Thanks, Whutchison
Whutchison

Scrolling Header works in Visual Studio but not on Report Server 2008

Similar Messages

Maybe you are looking for