Scrolling in Bridge CS6 is too fast/jerky

In CS5, the metadata and file list panels (et al) scroll about 1 line at a time so it's easy to scroll to the right spot. I'm finding CS6 is much harder to scroll precisely--either magic mouse or track pad on my Macbook pro. I find myself reverting to the scroll bars which, especially on the Mac, I'm not in the habit of ever using and isn't as productive. Ideally, scrolling should be fluid like other apps on the Mac. I'm hoping this is just a beta issue.
Bart

Using the hand tool is what I've been doing but it takes a long time on large images. In Photoshop at high magnification the scroll bar is slow enough to not zip by the image so I would think there would be a way to set it in Illlustrator.

Similar Messages

Scroll speed in finder windows too fast.

I have a folder with 249 folders in it.
I need to select folders more than a month old and get rid of them.
To do this I change to list view, sort by date newest items at top oldest at bottom, drag through (bottom to top) and select the items I want to trash while holding the mouse button.
The scroll speed is so fast that I am at the top of the list before I can stop.
Where is the preference for FINDER WINDOW scrolling speed?
FINDER version 10.4.2

Threre is no speed control.. but try this instead:
do what you've been doing... finder.. list view... sort by date, but select the FIRST item you want to delete by clicking on it ONCE.
then scroll down 'til you can see the last item you want to delete, press the Shift Key, then select the LAST Item on your list.
You should have automatically selected everything between your FIRST and LAST item.. which you can delete, or move en mass.
Good Luck
Quad 2.5 Mac OS X (10.4.6)
Quad 2.5 Mac OS X (10.4.6)

T440s UltraNav Touchpad Scroll Too Fast and Jerky

Wife purchased a T440s in November. Arrived December. I installed Windows 8.1 from scratch, and it worked. Then on Friday, Jan 31st 2014, I ran the driver update tool from Lenovo. It upgraded the driver to 17.0.12.60. She noticed that scrolling became much more unreliable. She could sometimes not get docs/webpages to scroll until she clicked around the page. Then she could get scrolling to work again. Also, scrolling speeds increased _dramatically_ to the point it was unusable. Also, the scrolling was quite jerky. So I rolled the driver back to 17.0.12.56 and immediately she noticed a difference. She was able to successfully scroll again and scrolling wasn't too fast and much smoother.
Others have noticed this on Notebook Review's forum. I'm going to ask those people to come here and add their comments.
Can Lenovo please fix the UltraNav driver? Thanks!

Yes, I experienced the same problem. Two finger scrolling became unusable (way too fast and erratic) after an upgrade to UltraNav 17.0.12.60. Reverting back to 17.0.12.56 fixed the issue.
Please fix this in the next version. Thank you!

Bridge CS6- Thumbnails gone and metadata too!

Hi everyone.
I am in panic mode.
I am running Bridge CS6 (5.0.2.4) And PS CS6. I recently updated something Can't remember if it was DNG and/or Camera Raw.
My problem started today when i went to view a folder of DNG images in Bridge. Initially the thumbnails of the images showed up, but then one by one, the thumbnails turned into the Adobe DNG icon. This is happening with tiff files too.
I went to Tools>Cache>Purge Cahe for Folder... That did not help. I simply can not re-generate the thumbnails.
I've also noticed that when I click on almost any image, my metadata does not show up in the Meta Data Panel in Bridge.
Another odd thing is all my images are keyworded. I used to be able to click on an image, and see in the Keyword Panel the keywords I chose for that image. That is no longer the case, however when I open that image in Photoshop CS6 and get file info, I see that my keywords and Metadata is there!
And the very last weird thing: If I go to the Bridge menu>Camera raw preferences, nothing happens. I used to be able to set my TIFF and JPEG handling options there.
This happened as I was finishing archiving about 20,000 images so you'll understand that I am a little bit more than upset....
Your help would be most appreciated.
Jonathan

After reading a few things online I decided to try re-installing the DNG/CR Update 8.4.0. That did not help.
I then decided to delete the ACR cache files, the Adobe Bridge 256, 1024, and Full cache folders, since there were tens of thousands of them.
I realize that Bridge might have to rebuild and it would take a while, but was wondering if something got corrupted there.
(I hope this wasn't a mistake).
I relaunched bridge, and as expected, none of my images have thumbnails, but I also see no way to re-generate those!
BTW- All this has happened with my back-up of this archive on a seperate HD.
I am unable to get the CR preference window to show in Bridge but I am able to acces the prefs from within PS CS6!
Going crazy!

IPhoto 6 scrolls too fast

When I reorganize a thumbnail in an album it scrolls too fast to put it where I want. In some cases I can resize the thumbnails so I don't have to scroll. But some times I have too many photos in the album to do that.
Any one else have this problem?
Any solution?

Yuck ... this has also been a problem in iPhoto 5. I see the same insane scrolling whether I'm drag-and-dropping one roll into another, or some photos from one roll into another. Still looking for a solution -- can we just modify a property in a plist or xml file of iPhoto? Larry.

Bridge CS6 too bright

My Bridge CS6 has suddenly become too bright. Any fixes?

Glad this solved your problem and no, if don't have trouble with views there is no need for purging cache at the moment.
Don't use NIK myself but I would choose for uninstall and reinstall the NIK plug ins.
Search for info before acting, here is a start:
https://support.google.com/nikcollection/answer/3000951
Save your custom presets by exporting them (always a good thing before updating or any other changes) and be sure to have the correct serial numbers and registration keys at hand. Then check for the latest versions on the NIK download site and install again.
And for the part of retrieving original filenames:
I never make a big deal out of filenames, I start with renaming on import using shot date yyyymmdd and a sequence number but check the option for the original filename being kept in exif. (you can set this as an option but I believe the original raw filename is always preserved, although not sure about this)
If you need to find (for what ever reason) this previous filename is somewhere in the XMP data of the file info. Either in advanced, Raw data etc.
And if this info is available there is always some one keen on writing scripts willing to help you with a script to reveal this info and use it as the new filename (there is a dedicated Bridge Scripting forum).
So in case of 6000 the longest wait would be to find some one to help you and then a bit time to install the script. The running of the script is a piece of cake and does the work for you, same as batch rename in Bridge can do.
Don't use LR myself that much, can't get used to the library structure and export of results. And prefer the customized UI of Bridge I have in combination with ACR and PS.
I also think (personal) that combining both LR and Bridge is not the best strategy…

Slides in Navigator scroll too fast

Dragging slides in Navigator to reorder my slides is nearly useless on my setup, as the slides scroll way, way too fast. Unless I have lightning quick reflexes, I find myself at the top or bottom of my presentation within a fraction of a second. Moving the slide to exactly where I want it is out of the question.
Anyone else had this problem or found a solution? I use a mouse. I don't have problems with scrolling in other applications. Changing system-wide prefs did not change this.
Many thanks / Matt

I guess that Macbook is a lot snappier than my G5. I'd like that kind of problem. You can always grab the slider to the right of the slide and drag it where you want it as slow or fast as you wish.

Lion mouse scroll speed scrolling too fast

System Pref > Mouse > Scrolling Speed is set to the slowest level and it is still way too fast! Heard others complaining about this on a Parallels discussion group and thought I would post here. Incease the range of scrolling sensitivity in an update please! Reply to this post if you are having the same issue.
Scrolling was always way to fast in leopard when using Iphoto, but this with Lion it is too fast everywhere else except for huge files.

I suppose you are using a non-Apple mouse. You will need to update the software, and adjust the tracking multiplier within the software.
Logitech just came out with an update for Lion.

Parallax scrolling too fast outside of Muse preview

I'm trying to get the hang of parallax scrolling, but how it previews with Muse differs greatly from any actual browser.
I export the HTML file, it pops open in Chrome and looks great. But if I try to open the HTML file from the folder into Chrome, or preview the site after it's uploaded to the web, suddenly the scrolling is way too fast. Everything disappears with one flick of the mouse scroll wheel. It also happens in Firefox and IE.
I've tried importing scripts, but again, it effects the Muse preview, but not the actual site in the end.
Is this a common problem? How should I approach to work around this?
Thanks!
I'm using the latest version of Muse. Chrome is up to date. I am on a Windows 7 computer.

Hi,
This is an odd issue. Please provide your site URL to test it. You can publish a trial site on Business Catalyst.
Regards,
Aish

TS4002 Scrolling in iCloud e-mail is just too fast. How can I slow it down?

That small e-mail scrolling bar just moves too far too fast. I want to be able to view my e-mails a few at a time then move on to the next few. As it stands now, it skips way ahead with the slightest touch. There are no arrow heads top and bottom to control the movement. How can I control the scrolling??

Aha! Sussed it!
Click 'Follow Tempo' in the inspector on each track. This activates the Transposition function in the inspector. I've reduced the tempo by 20bpm and set Transposition to -2 on each track.
Hey presto, no longer do me and my mates sound like we had been drinking way too much caffeine two decades ago!

Scrolling Too fast

Hi, the scrolling speed of all the web pages in Firefox is too fast. With other browsers there's no issue. I'm using the device
"Micromax A177". It runs on jelly bean. And it's not rooted, if that info is required. I love to use Firefox on my mobile. But this issue is bothering me so much.
Thanks in advance.
P.S. by too fast I mean just by a single swipe I will reach the end of the web page which usually takes not less than 5 to 7 swipes on chrome

hi Dinesh013, i guess that's a bit of a matter of preference - some people might prefer to be able to scroll through a page with a single gesture. however the speed of scrolling should be adaptive of the speed of your swiping gesture...

A bug? Photoshop Action Playback is too fast after CS5-CS6 upgrade!! My action wont work

On a PC
I upgraded from CS5 to CS6 (cloud) over the long weekend and I'm now faced with a massive headache. The process actions I use intensively for my work are all foxed by the simple problem that the action playback is going too fast for scripting over two documents to keep up. I have tried everything I can think of but the only thing that allows the action to progress sensibly (as in previous versions of the software) is the step-by-step playback mode. This is too slow to use on an ongoing basis.
The problem is caused by the following sequence
Save as document (on desktop)
Open as document - open as Camera Raw - after settings open in Photoshop
Select All
Copy
Close - saving no
(PS automatically selects previous document)
++++ paste ++++ ERROR Paste command is not currently available
This is where Photoshop should select the previous/underlying document before applying the Paste command. Since the upgrade its been trying to paste the clipboard in the split second after closing and selecting the previous document, and reporting no document available at all. Slowing or pausing the playback with step by step or stop&continue works around the problem but causes workflow to slow down drastically.
Is there a way to script a pause during this one crucial moment? Or is there a preference setting I have overlooked that is casing the behaviour?

Save as - open as camera raw - select all- copy - close - paste. The dance is the ony way I can apply Camera Raw settings such as clarity, noise reduction etc to my retouch after the initial raw conversion. Its a well used technique that I've known about for years. Loads of people use this method in CS6, but for some reason I can'y get it to work after the upgrade.
The action is recorded in the regular record/play type action script. Its a big action and would take many hours to convert into javascript (even if I had the skills). I could possibly use the script recorder plugin but that rules out future tweaks without rewriting everything from scratch. app.refresh and $.sleep sound interesting though... is it possible to incorporate them into the basic action script?

Touchscreen scrolling is too fast / broken in Acrobat 10.1.5 on Windows 7

Open a document more than 100 pages and try touch scrolling up and down in Windows 7. The document scrolls WAY too fast, making it necessary to use the scrollbar. Document should scroll at the speed of the gesture. At the very least there should be an option to adjust the sensitivity.
This basically breaks touchscreen scrolling, especially for people with hand impairments.
Is there a way to fix this behavior?

Hi Mariel204!
Try using the following article to help you troubleshoot this issue with your ability to install iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Elements organizer scrolls too fast and jumps when an image is selected?

Why does elements 12 organizer on new mac scrolls too fast and jumps all over?

I have found this to be a problem as well. Like other products, the scroll speed should start slow, and only speed up if the user moves the cursor further outside the panel.
Vista on Dell XPS 710.

Just updated Firefox, not sidebar scrolls too fast.

I just updated Firefox. Now when I hold down the vertical scrolling arrow at the bottom right of the page it scrolls faster than it used to. It's too fast. How do I slow this down?

There are extensions that work both for the mouse and the keyboard to set the scroll amount, but they can only be set to scroll an amount of pixels and not to scroll one line regardless of font-size (height) of the text.
* SmoothWheel: https://addons.mozilla.org/firefox/addon/smoothwheel/

Scrolling in Bridge CS6 is too fast/jerky

Similar Messages

Maybe you are looking for