Scrolling Marquee for CAD 8.0.2

Hello,
Can anyone help me with a link or advice on how to configure this? I have a supersviisor that wants to send message to his teams and remove them when he wants. Any help would be greatly appreciated.
Thanks

Look at this document, it explains the difference betwen the various reports. So for example:
On page 115 you see the email CSQ report and it shows all the fields and how they are calculated.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/user/guide/uccx801HRug.pdf

Similar Messages

Scrolling Marquee created in Flash 5.5 Pro not working in CP5.5

Hi all.
I've created a scrolling marquee .swf within Flash 5.5 Pro which has the dimensions of 30x205.
This works perfectly both testing the scene in Flash as well as when you view the .swf on it's own.
However, when I import the .swf into Captivate 5.5 and run the project, the scrolling text starts perfectly but then doesn't stop, i.e. it is not bounded by the original size of the Flash project so I end up with the message sscrolling right across the screen till all the text is visible, when it disappears.
I'm not sure if this is a Flash problem where I have missed something or done something wrong, or a Captivate problem.
I'm really VERY new to Flash so I'm guessing it is something I haven't done.
I understand that you can force Flash projects to be bounded to an area of the screen by using AS3, but I have no coding experience and am stuck.
Can anyone help?
I'm happy to share the relevant files if anyone wants to see what I've done.
Thanks all.
P.S. I've also posted this in the Flash forum in case it is that.

Col, it's just one of the quirks in the way that Flash works. Even though youv'e set your Flash document size to be only 30 pixels by 205 pixels, if you have the text starting off stage and scrolling onto the stage, then the REAL stage area (including the scrap area around the stage) MUST be larger than 30x205 right?
So what happens is that unless you mask the stage area to hide the bits you don't want to see, if you place that SWF into another SWF that has a larger stage area, then the scrolling text will be visible even before it gets to what you thought to be the visible stage area.
So you need to get your head around the concept of Masking in Flash to pull off what you want to do here. With masking, you're actually looking through a window the same size as the mask to see the scrolling text. Then even when you bring it into a larger SWF like the Captivate movie, all you're going to see is the area covered by the mask.
I tried to get to your FLA file but couldn't find it in Acrobat.com for some reason. Message said the file could not be found.

I have a website that has a scrolling marquee which i assume uses java and because you have blocked java it wont work when viewing, is there a way around this?

I have a website that has a scrolling marquee at bottom of the page with vital information for viewers of the site, this works fine on internet explorer but not firefox, I assume its because you have blocked Java? Is there a way of solving this problem?

To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
Marquee requires JavaScript to be enabled.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Scrolling Marquee Issue

I used the html editor to put in a scrolling marque (I used quackit to help write the code). I am a beginner in html code, but I can read it well enough to see what different things do, just have no clue writing it. Anyway, I am using godaddy to host my site for free right now until I have the site completed, then I will either use their paid service or someone else. The scrolling marquee in my site though does not work, it just shows a godaddy ad instead.
Here's the link:
http://www.abenefitsolutions.net/AdvancedBenefit_Solutions/Healthinsurance.html
The marquess is right below Health Insurance. It looks like godaddy is trying sees it as a new page within the page and trying to put their ad header in there. I am not sure if this goes away when I pay to have a host, but thought I would ask ahead of time.
There is nothing in the code that links it to another site that I see, but I could be wrong.

That's the problem with "free" hosting at GoDaddy as they use a shared server as the topic I refer to below indicates.
There was another user with a very similar problem. I don't think it was a scrolling marque but whatever it was had the same stuff in it as you do. This is the topic: http://discussions.apple.com/thread.jspa?messageID=9141749&#9141749. There are other posts about the free GoDaddy service. You can check them out:
http://discussions.apple.com/thread.jspa?messageID=9141749&#9141749
Try running the site locally from your hard drive and see if the marque works as it should.
As for marque scrolling text you can add it to an HTML snippet easily as I did in this demo page: Embedtests
OT

Any way to capture scrolling marquee text and boxes that are automatically populated?

Using Captivate 5.5 on Windows XP.
I'm trying to record a demo that has a marquee at the top of the window that scrolls to the left (sort of like that marquee in Times Square). Is there any setting that would capture that scrolling action?
Also, we have screens that are completed by the system based on a user's selections on a previous page. The system completes those fields quickly, but one at a time. Is there a setting that would show each of those fields being completed?
Thanks in advance for your help.
Mary

Only using FMV full motion capture would capture your scrolling marquee.
If the fields are being completed so quickly by the system that neither the automated Captivate capture picks them up and you cannot capture them manually, then use FMV for that as well. Just set your preferences to 32bit FMV. The 16 bit video capture almost always looks wrong.

How to get the Horizontal Scroll Bar for a Table?

Hi All,
As per my requirement, I am displaying several records in a Screen in a Tabular Format. But here I have to show 21 Columns in that table which is too high. I am able to display it but due to it I am getting a Horizontal scroll bar for the whole screen since all the columns are not getting displayed in the normal window screen space. But its looking too odd since once I am scrolling it to right the columns are getting displayed but the above Header Bar and Global buttons are not displaying, they are bound to the normal screen space.
Is there a way to have a Horizontal scroll bar only for that table instead of the entire screen so that on scrolling that bar only the table rows will beshifted ant got displayed?
With Thanks
Kumar Gautam

try this approach.
include a raw text item before and table item.
include the appropriate HTML tags in raw text item to enable horizontal scroll
--Prasanna

(CES2014)MSI Best Laptop for CAD & 3D Modeling photo gallery

Las Vegas, NV, United States,CES2014,1/6~9
GT60 2OK 3K IPS Edition (K3100M) & GT70 2OL (K4100M)
GT70 2OL (K4100M)
Best Laptop for CAD & 3D Modeling
GT70 2OL demo stration.
GT60 2OK 3K IPS Edition (K3100M)
Best Laptop for CAD & 3D Modeling
More new photos, will continue to update on this topic.

WoW K4100M is a very powerful Quadro solution:)

Horizontal scroll bar for the adf page

Hi,
We have around 7 tables in single jsff page. Here , we have a requirement like :
We need to show horizontal scroll bar for the entire page instead of each table. Is there any way to get this.
As of now, we have horizontal scroll bar for each table, but our customer is not accepting this, that want the scroll bar for the entire page.
Please suggest the approach.
Thanks

I have grouped all the tables in panelgrouplayout.So, what is the problem (because it is not quite clear what you need)?
If your PanelGroupLayout is with layout="horizontal", then the tables will be rendered next to each other horizontally but there will be no horizontal scrollbar on the page.
If your PanelGroupLayout is with layout="scroll", then the tables will be next to each other vertically and there will be a horizontal and a vertical scrollbar on the page (if necessary).
If you need your tables to be relocated next to each other horizontally and to have a horizontal scrollbar on the page, then use a PanelGroupLayouts(horizontal) inside a PanelGroupLayout(scroll):
<af:panelGroupLayout layout="scroll">
<af:panelGroupLayout layout="horizontal">
    <af:table> ... </af:table>
    <af:table> ... </af:table>
    <af:table> ... </af:table>
</af:panelGroupLayout>
</af:panelGroupLayout>If your problem is that you still have horizontal scrollbars inside the tables, then you should set appropriate widths to the corresponding tables (e.g. to <af:table> tags) such that they are large enough to fit the sum of corresponding column widths.
ya, I know that its not god design, but its customer requirement, so we need to do that.If you expect some table(s) to be stretched automatically according to the size of browser's window, then you should re-think your UI design because PanelGroupLayouts do not stretch their children. A possible solution is to use a combination of PanelSplitters or other layout containers that stretch their children.
Dimitar

Horizontal scroll bar for combo/lsit box in JSP

hi,
i want "Horizontal Scroll bar" for combo box to display long names.
regards,
krishna

Not a JSP issue. Look up styles, CSS, and dynamic HTML. They should help.

REG:: Horizontal scroll bar for pdf

Dear All,
I am displaying data in a table in Portal and this table has 13 columns in it. I am writing all this data from the table to a PDF and I am able to generate a PDF.
This generated PDF clips the data on the right side, i.e. it shows few columns only.
I need to have the horizontal scroll bar for the generated pdf output file.
Can anyone guide me how to achieve this.
Regards,
JayPal.

hi pal,
refer this help
http://help.sap.com/saphelp_webas630/helpdata/en/3f/c0ae3dacbff972e10000000a114084/content.htm
bvr

Want a scroll bar for a table view

Hi Experts,
I am developing in NWDS 2004S.
I have 2 groups in RootUIElement,
in one group i have few labels & input box with a button,
in other group I have a table.
On click of button according to values in inputbox an RFC is called & Table is populated.
Now my requirement is like, my table has around 33 columns
But i don't want the scroll buttons in footer of table view
I want normal scroll bar for that table.
Kindly help me.
Will award points !!!
Thanks

hi
          thanks for the reply ,
        using scroll container is working fine ,
           but this functionality should be achieved for the
           table , not table to be put int he scroll container
           as the problem is , i have 2000 entries in the
             table and for this again i need to drill down using
                 arrow or drill for certain entries using arrows
            instead need scroll bar for the table
                 if this can achieved it would be helpful ?

Vertical scroll bar for the table

Hi,
I have a table which will contain more than 100 rows. First Visible rows will be 10.
i want a vertical scroll bar for the table, so that i can see all the rows using vertical scroll bar. While scrolling down, the header row, which contain names of the column should be static (ie visible even scroll down) and the footer of the table should be visible even goes up.
If I use Scroll container, it will take whole table and the header row, row with name of column will move up invisible when i scroll down. So it is not useful if i use scroll contatiner.
I need a fnctionality were table has a vertical scroll bar to it.
Thanks
Maha

Hi,
Your requirement is one of the default properties of the Table UI element in NWDS CE version.
Regards,
Alka.

Scroll bar for the table

hi
      i have a scenatio where the table need
        scroll bar , so ihave used scroll container
        for the table   and i am able to view   both
      horizontal and vertical scroll var , but i need
       only verticle scroll var .
          how can this be achieved ?

hi
thanks for the quick response ,
       but its not helping me .
            i have set the width of the table less than
         scroll container .
              i need just vertical scroll bar to be visible
               no horizontal scroll bars
                  iam able to view both .

Problems with scroll wheel for sound

Hello,
I have a Satellite A300D PSAKCE.
When i bought the laptop the OS was vista. I upgraded it to Windows 7
But when i use the scroll wheel for the sound, at the front of my laptop
image:
http://pan.fotovista.com/dev/2/7/01080772/l_01080772.jpg (the scroll wheel is at the right of the audio output, barely visibly on the picture but couldn't find a better one.)
But when i scroll it (right or left) it also is putting the letter C on the window(if i have a application open where you can type or where c is a shortcut to something). This is very annoying, does anyone know a solution?
thank you.
Thomas

I know many people who have 30 gig and no wheel problem. I have an 80 gig and no problem. Finding your warranty (or buying the extended warranty) would be useful.
Good luck.
Kid

One finger scrolling option for mouse is GONE from preferences?

The one finger scrolling option for mouse is apparently GONE from the mouse system preferences? Why do they move/hide this stuff every other system update? Grrrrr!
I turned off the one finger scrolling option in mouse preferences a while back before my last system update to OSX 10.8.5 because it screwed me up in Photoshop/Illustrator. Recently using Chrome I found I couldn't scroll down windows now on some web pages because the scroll bar at the right doesn't show up very well. I usually use Safari and it works there so it's a Chrome problem. However, I want to turn the one-finger scrolling back on for some things from time to time. When I tried to check the box in mouse preferences, to my horror, that option appears to be gone. What?!? Help!
*totally waiting for a simple answer that I overlooked. I hope.

Did you look in the Zoom menu (press F10 to make the menu bar appear)?

Scrolling Marquee for CAD 8.0.2

Similar Messages

Maybe you are looking for