Scrolling messes source code on JDeveloper 10.1.3.5 Windows 7 (64 bit)

Hello!
One can only work around the problem as in vista, by using a new Sun jdk, other than that shipped with JDeveloper.
However, this is not considered safe, as the newer jdk is neither tested nor certified to work with that version of JDeveloper.
I have already searched My Oracle Support, only to find a patch about a memory leak for JDeveloper 10.1.3.5. +(I wonder why is it not offered to the public anyway?+)
Could any one from Oracle please see to a more permanent and safer solution to the problem?
I am looking forward for your prompt actions, and thank you very much in advance!

Let me rephrase: when one scrolls using page up or down keys, or by using a mouse wheel, the source code lines ( and characters) appear partly only, either distorted or overlapping with each other, in such a way that one cannot make out what has been written. I hope the above clarifies the problem in question. In such a case a screen shot might actually serve us perfectly.
I have already given your suggestion a try, without any success.
Thanks anyway very much for your reply!
Any other helping hand available?
TIA!

Similar Messages

Anyway to have source code html, design view and CSS open windows at the same time?

Hi all,
Is there anyway I can keep design view, source code AND css open on screen all at the same time?
Constantly clicking between source and css is really becoming irritating, would be so much easier if they were both on screen at the same time.
Any help would be great

You have two choices.
1 You can go to preferences>general and the very first item (in CS6) is "open document in tabs" if you deselct that then you can view your page in split view and also open up the CSS file and have it visible as well.
2 If you use tabs you can view the page in split view and open the CSS file and then detach the css from the tab and it will be an idependent item. You detach it by highlighting the tab and then dragging it down.
It helps to have a large screen, and better still to have more than one screen, you can put the css on the other screen.
VL Branko

Error code 25014 running RnR 4.3 on Windows 7 64 bit

System: Lenovo T410 (System: 2516-CT0) Since purchasing the system from Lenovo in November 2010, always received the following sequence of events when running RnR:
1) Lauch RnR to peform backup
2) Click on 'Backup Now"
3) Message "Please wait while Windows configures Rescue and Recovery" display every time.
4) After a few minutes, the following error always displays: "Error 25014. There was an error installing the Rescue and Recovery boot manager. Return Code: 96."5
5) Back up appears to then perform.
I've tried uninstalling and re-installing RnR. I haven't touched the "Q:/" drive/partition shipped with the system. I did purchase and plug-in, via eSata port, an external 1Tb drive for backups.
I've searched this form and the web and found similar. But all allude to "Return Code: 6" not the "96" I am receiving. Additionally, the other post indicate the system was re-installed after factory. My system is factory.
Thanks

Hi nelsondd,
I have some questions but no answers:
Can you see yor external drive in windows explorer? I have a USB/eSATA external drive that had to be initialized via USB before eSATA could be used.
When you do "backup now" do you see activity on the external drive LED?
If you go to the advanced R&R screen, are you able to select the external drive as a target there?
The error seem to be saying that it couldn't install the boot manager on the target drive. IIRC that one button backup first formats the drive, then installs R&R on it, then the backup image.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error. I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where. I'm frustrated because I really don;t have the money for a new laptop.
Laptop is a HP Pavilion DV6700.
Any help would be appreciated more than you know.
System is Windows Vista 32 bit
The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
This question was solved.
View Solution.

You're very welcome.

Cannot see source code

I have just installed Contribute CS4 and connected to my web
site. When I "view" my home page it shows fine but when I click"
Edit Page" I cannot see the source code. There is just nothing
showing to edit. What am I doing wrong? Also when I finish editing
this message I cannot find any button to save it!
Thanks
Dick Roose

You can use any suitable html or plain text editor to edit
the source code of pages through Contribute. On windows you can use
f.i. Notepad. You just have to let Contribute know which program
you want to use (main menu>edit>preferences>file
editors).

Where to get Source Code

Where can i get the source code for Java libraries
interested in Polyon

On windows there is a src.zip in java home directory. Probably similar file on oterh os's
Cheers
DB

Installed JDeveloper 9i - RUP 6 on Windows 7 - Radio buttons do not appear

a) I have installed JDeveloper 9i/RUP 6 on Windows 7 (64 bit)
b) Database connection, application connection is fine.
c) I am able to run some of the sample projects, able to connect Oracle applications etc..
d) In JDeveloper settings window, radio buttons, check boxes etc do not appear/show-up
For example JDeveloper --> Tools --> Preferences --> Embeded OC4J window
None of the radio buttons appear.
Would appreciate, if you can help.
Thank you,

Would you be able to share what you did to get JDeveveloper 9i to run on Win 7 64-bit? If so, what's a good way to get in touch maybe offline?
When you say 9i, does that mean JDeveloper 9.0.3 ? that's the version I want to run.
Thanks,
Skip

Where can i get Oracle JDeveloper 9i Handbook exercise source code?

Hi
I'm studying JDeveloper 10g by read the book <<Oracle JDeveloper 9i Handbook >> which written by Peter Koletzke,Paul Dorsey and Avrom Faderman, Where can i get exercise source code? In chapter 13,I can't create the application module AccountantPromotionModule,who can help me or some idea?
thank you
li xinzhu
2004.9.2

Hi,
You can download source code for the 9i Handbook from either of the following websites:
http://ourworld.compuserve.com/homepages/Peter_Koletzke
http://www.dulcian.com
Note that, if you're using Oracle JDeveloper 10g (rather than Oracle9i JDeveloper), you might be interested in the just-published Oracle JDeveloper 10g Handbook. Oracle JDeveloper 10g has some very significant differences from Oracle9i JDeveloper--especially the introduction of Oracle Application Development Framework (ADF)--and these are covered in the new book but not the old one.
If you do get the new book, you can download code for it (or rather, will be able to by the end of this week) from either of the above websites or from
http://avromroyfaderman.com
Hope this helps,
Avrom

Source Code Fomatter for Oracle Jdeveloper 9i

Guys,
I am using Jdeveloper 9i and want to format the tool according to some standards but across the web and in the the oracle portal as well i have found formatting tools for jdev 10g but none for jdev 9i.Can anyone suggest me how to go about this.
Thanks&Regards,
Satish

Hi,
You can download source code for the 9i Handbook from either of the following websites:
http://ourworld.compuserve.com/homepages/Peter_Koletzke
http://www.dulcian.com
Note that, if you're using Oracle JDeveloper 10g (rather than Oracle9i JDeveloper), you might be interested in the just-published Oracle JDeveloper 10g Handbook. Oracle JDeveloper 10g has some very significant differences from Oracle9i JDeveloper--especially the introduction of Oracle Application Development Framework (ADF)--and these are covered in the new book but not the old one.
If you do get the new book, you can download code for it (or rather, will be able to by the end of this week) from either of the above websites or from
http://avromroyfaderman.com
Hope this helps,
Avrom

"Organize Imports" feature in Jdev10g will totally mess up my source code

I set "Use Wide Imports". The source code became a piece of junk after running "Organize Imports" against following code:
* @author
package test;
import java.io.*;
import java.util.*;
import javax.xml.parsers.*;
import org.apache.xerces.util.XMLChar;
import org.apache.xml.serialize.*;
import org.apache.xml.utils.*;
import org.w3c.dom.*;
import org.xml.sax.*;
public class Test {
This bug exists in preview version. I'm suprised this bug still in production release.

The javadoc comments is causing the behavior.
Removing the java doc comments seems to work
Bug 5006753

Unable to depoly Web Serivce for the source code written in other editors

Hi all,
I am planning to implement webservice with the following code. But I am facing few problems with this can some body help me with this.
The code looks like this AND IS NOT WRITTEN IN Jdeveloper BUT EDITPLUS
package package1;
public class Sum
public int getSum(int a, int b)
          return a+b;
package package2;
public class Sub
public int getSub(int a, int b)
          return a-b;
package package3;
import package1.*;
import package2.*;
public class Mul implements TestInterface
     Sum sm = new Sum();
     Sub sb = new Sub();
public int getMul(int a, int b)
          return sm.getSum(a,b)*sb.getSub(a,b);
public static void main(String [] args)
          Mul ml = new Mul();
          System.out.println(âThe result of (3+6)*(3-6) is â+ ml.getMul(3,6));
package package3;
interface TestInterface extends java.rmi.Remote;
     public int getMul(int a, int b) throws java.rmi.RemoteException;
I have written this in editplus. Not in Jdeveloper.
Now I want publish getMul() as web service using Jdeveloper.
I have created a new application work space. And from File-->New
I have choose project from existing source and imported âpackage3â.
At this stage it was unable to find the class files Sum and Sub so I placed Sum.class and Sub.class in Appliction1-Project1-classes-
Now the Mul class did not have any errors and it compiled fine. When run it gave the correct output.
Using the web service wizard I was able to generate wsdl file , deployment descriptors etc.
The problem I was facing was form this stage when I am trying to deploy it on to a standalone oc4j server it is not able generate the WebServices.war file and hence is not deployed on to the server.
With the same code written in Jdeveloper everything is working fine.
My doubts are
1)     why is it not able to generate WebService.war file?
2)     It is giving some ClassNotFound exception during the deployment. But when compiled and run its giving the correct output.
3)     Even when everything was written from within the Jdevelper it did not include Sum.calss and Sub.class in WebSevice.war. Is there any way we could mention during its (WebService.war) generation , the class files to be Included.
The other issue is how to add an existing source code to already existing project. In my case Once I have imported package3 I also want to import package2 and package1 in different steps.
I thank in advance for helping me.
Raja Vamshi k Gopu

Can you tell us what you mean by correct type of project?
You can start with an empty project. Then, you have to create an "EAR file" deployment profile (New Gallery / General / Deployment Profiles).
So when I deploy a J2SE module onto oc4j server should I specify the class path? If so where ? How can I solve this problem?
Once you deploy your code into oc4j, it becomes a J2EE application. You don't need to deal with the classpath - just make sure that all the required code is included in your .war file. To do so, check the list of classes packaged under the deployement properties dialog.
Can you send me the links of few articles where I can learn more about these kind of stuff?
If you want to assemble applications without to use JDeveloper wizard, you have another option: using the WebServiceAssembler tool that is par of the oc4j bits will help you to do this from a command line promt, and will handle the J2EE packaging aspect for you.
See online documentation (10.1.2): http://download-west.oracle.com/docs/cd/B14099_04/web.htm
In the "Developer's Guide", chapter 9 is about "Web Services Tools"
For JDeveloper J2EE samples, you can start by looking at the OBE: http://www.oracle.com/technology/obe/obe_as_1012/j2ee/index.html
Hope this helps,
Eric

Question about the Documentation Tags for Source Code

Hello,
I have a question about CVI's automatic source code documentation. My problem is that is seems like you need to write all documentation for a specific tag on one line. If you don't, a line break will be inserted when the documentation is displayed. Suppose I want to write a large amount of documentation for the function itself, using the HIFN tag. If I don't want linebreaks to be forced in the documentation, I need to write all this documentation on one single line, which kinda messes up my code. If I split the documentation over several HIFN tags, the documentation displayed to the user might look messed up because of all the linebreaks. Is there any escape character I can put at the end of a line, allowing me to split the documentation of several HIFN lines without forcing linebreaks in the documentation?
Thanks!
GEMIDIS - Innovating Display Technology
HQ Ghent, Belgium

This information is certainly useful. Note, however, that it can also be found in the documentation
Tag
Description
/// HIFN help text
Specifies the help text for the function. Use multiple /// HIFN tags to display help text for the function on separate lines. To separate help text with an empty line, use /// HIFN on a line by itself. You also can use HTML tags, but you must enclose the tags in <HTML><BODY></BODY></HTML> tags.
Example
/// HIFN SampleFunction returns the value of a control.
int SampleFunction (int controlID, ctrlType controlType, char label[], double *value)
SomeAction;

How to edit Java source code of a generated Web Service?

I generated a Jax RPC (1.4) Web Service using the JDev Wizard . Everything works fine. But now I need to make some changes in the business logic contained in the source code. The problem is there is no easy way to get to the source code - JDeveloper shows the web service but right clicking on it only lets me go to the WSDL or Mapping file - not the Java source.
So - how do I get to the source.
I could do a file -> open and open up the java file and edit it - but this seems like a round about way . Why doesn't JDev let me go back to the Source code easily?
It does provide a Regeneate from Source option but there is no way (as far as I could tell) to actually jump back into the source code after I've generated the Web Service.
Thanks!

Hi,
just to confirm that Jan is ight. If you seect the generated WSDL icon, which is shown in the Application Navigator, open the Structure Window and you'll see all teh generated interfaces and sourcefiles, as well as your WebService file.
Alternatively you can use teh System navigator which will show all files in one view (ctrl+shift+N)
Frank

How to get source code of ADF demo page.

I have used oracle ADF demo site for demo work related to graphs.
I want to download the source code of this demo. I mean jspx file, backing bean and style classes.
Is there any way I can download this source code?I believe there is no sense to use it without downloading it's code.
I want to download "Area graph Animation" from below link:
http://jdevadf.oracle.com/adf-richclient-demo/faces/feature/graph/animation.jspx?_afrRedirect=2611981845492287
Please help!
Thanks,
Jaykishan

This does NOT have .JWS file as
The demo WAR is a JDeveloper Project packaged into a WAR file.
So creating a dummy application or open an existing application.
Select 'File' ----> 'New' --> 'Projects' and select Project from WAR.
Thanks,
Navaneeth

How to remove css style from source code?

Hello,
I am working on launching a website soon and saw that I have some repetative css styles in the source code. I would like to remove them, because I want my style sheet "115209.css" to be the main controller.
Below is my code. I just need to know what exaclty I need to remove to make that happen. I am a bit of a newbie and am not too comfortable in chopping it up myself in fear that I might lose a closing tag or something else of importance.
Any help would be greatly appreciated!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Novato Youth Center</title>
<link rel="stylesheet" type="text/css" href="115209.css" />
<style type="text/css">

</style><body>
<div id="wrapper">
         <div id="headernav"> <a href="index.html">Home</a><br>
           <a href="overview.html">About Us</a><br>
           <a href="donate.html">Donate</a><br>
           <a href="getinvolved.html">Get Involved</a><br>
           <a href="contactus.html">Contact Us</a><br>
      Español </div>
        <div id="header"> <a href="index.html"><img src="http://www.novatoyouthcenter.org/logo.jpg" /></a>
    <div id="Title">
      <h1>Novato <br>
        Youth Center</h1>
    </div>
    <div id="Tag">
      <h2><em>Success Starts Here</em></h2>
    </div>
      <div id="socialbuttons"><a href="http://www.facebook.com/pages/Novato-Youth-Center/151677233396?v=app_2309869772#!/pages/No vato-Youth-Center/151677233396?v=wall"><img src="http://www.novatoyouthcenter.org/facebook_button_11.gif" alt="facebook" height="48" width="50" /></a><a href="https://twitter.com/#!/NovaYouthCtr"><img src="twitter-icon.jpg" alt="twitter" height="48" width="48" /></a></div>
</div>
        <div id="navigation"><a href="6to5.html">Infants - 5 years</a> | <a href="5to14.html">5 - 14 years</a> | <a href="teens.html">Teens & Young Adults</a> | <a href="adults.html">Parents & Adults</a></div>
   <div id="leftcolumn">
         <h4> </h4>
         <h4>Academics...<br>
         Health...<br>
         Arts...<br>
         Athletics...<br>
         Community...<br>
         FUN!<br><br>
         Inspiring and <br>
         preparing youth<br>
         for success.
         </h4>
         <p> </p>
         <p> </p>
         <p> </p>
         <p> </p>
         <p> </p>
         <p> </p>
         <p><strong>Sign up for our</strong></p>
         <p><strong>E-newsletter!</strong></p>
         <p> </p>
         <form id="EmailSubmit" method="post" action="enewsletter.php">
           <label>
                <input name="emailsubmit" type="text" id="emailsubmit" value="Email Address" />
                 </label>
              <input type="submit" name="Submit" id="Submit" value="Submit" />
              <input name="recipient" type="hidden" id="recipient" value="0" />
        </form>
         <p> </p>
   </div>
   <div id="content">
     <div id="mainphoto"><img src="indexphoto.jpg" width="656" height="386" alt="main" /></div>
   </div>
</div>
</body>
</html>

Maybe I already removed the "h1", but I still see link styles and the
background color.
I need to know what point to which point is safe to delete without messing
up the coding.
Thanks again,
- Theresa

Scrolling messes source code on JDeveloper 10.1.3.5 Windows 7 (64 bit)

Similar Messages

Maybe you are looking for