Scrolling on Magic mouse no longer work after OSX update

I have just performed an OSX update and after restarting I immediately noticed that the scrolling function and other gestures no longer work on the magic mouse. I have also noticed that no gestures work on the Mac Book Pro track pad. The only function that works on the mouse is moving the mouse pointer and the buttons. Same goes for the track pad. Some great update that was. Has anyone else discovered this and how do I repair this loss of function? When I first initiated the update, I saw that there was a download required which mention some improvements for the mouse/keyboard but mainly updates required to support the new magic track pad. Is it possible to revert this individual update and if so how? Thanks.

You were almost correct, but not quite. You can see updates in /Library/Updates. I'm not sure what receipts is, but it didn't contain the track pad/mouse update package I was expecting to see. However, I did eventually find it in Updates after a trip to my local Apple store. What happened was that the original update process completed about 95% but for some reason crashed. When I restarted, it appeared that there was nothing wrong, until that is I tried to use the mouse and track pad. I presume that the update process uninstalled the previous package but didn't actually install the new update. I downloaded the the latest update from Apple, but it appeared to be older than what I downloaded from the Update process, so it wouldn't install. I would suggest that here lies a bug. The package install process did detect the new trackpad / mouse package but it didn't detect that it wasn't installed and should have prompted me to install it.

Similar Messages

Double Click on Magic Mouse No Longer Works after 10.9.1 Mavericks Upgrade

I just recently updated to Mavericks 10.9.1 and once the computer restarted, I noticed that double-click on my Magic Mouse no longer worked. I searched the forum and couldn't find anyone experiencing this. I also went into System Preferences --> Mouse but there is nothing about enabling double-click or adjusting double-click speed on there.
Would appreciate if someone were able to help me solve this. Thanks!

Try resetting the PRAM.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Magic mouse no longer works after Lion upgrade

After upgrading to Lion my magic mouse failed to work. I plugged in an older USB mouse and thankfully it does work. It appears the System Preference for Blue Tooth no longer has my machine name in it, instead it has "Name not available" and the "On" check box will not stay checked when I reopen the preference. The syncing process "Set Up New Device..." doesn't seem to work either, it searches but doesn't find eventually the flashing LED on the mouse goes out.
I've tried to solve this but failed. I believe its something wrong with the installation of Lion on my iMac because I installed Lion on my lap top and the magic mouse WILL sync with it.
What do you suggest I do to remedy this situation?

Solved it myself. Re installed Lion.
Thanks Radio for your help

Apple Wireless Bluetooth Keyboard no longer works after OSX update

After installing the latest OSX update yesterday (something about iChat encryption), Apple Bluetooth Keyboard no longer works with my iMac.
When I restarted the iMac after installation was completed, the iMac would no longer recognise my Bluetooth Apple wireless keyboard. I've tried with 2 other Apple wireless keyboards as well, but to no avail. None of them work with the iMac any longer. All 3 keyboards work with my PowerMac Quad G5 though.
The iMac "sees" the keyboards, but the pairing doesn't go through because the iMac doesn't seem to recognise the keystrokes when entering the pairing code.
I had to go out and buy myself a Microsoft wired keyboard to be able to restart the iMac (couldn't enter the login password without a keyboard).
My bluetooth mighty mouse works flawlessly though.
Very frustrating. Can anyone help?
...tt
iMac 24" 2.33GHz 3GB Mac OS X (10.4.8)

And yes I checked the batteries.

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

Mouse gesturing no longer works after recent update ?

Recently, after an update my magic mouse no longer functions using the swipe gestures...Anyone else with this issue?
tried to look at in in preferences bt no options there.

Helpful link from 95bulls. Here is the Apple link which deals with the more general problems one can have with an unresponding Mouse. Is the green power light working or blinking?
You don't say which update or give any details of the OS you use. Please try to find a moment to update your profile.

I have an IBM Think Pad and since installing the latest version of Firfox, the trackpoint scrolling on my mouse no longer works

I have an IBM Think Pad and since installing the latest version of Firfox, the trackpoint scrolling on my mouse no longer works

Try to modify the pref ui.trackpoint_hack.enabled on the about:config page from the default value -1 to 0 or 1 to see if that makes the scroll pad work. 
Close and restart Firefox after changing the pref.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Magic mouse no longer working in Windows 7

Hi, I posted a topic under the Windows section but got no answer. When I first installed Windows 7 on my Mac (Sorry poor Mac but I had to), my Magic Mouse worked seamlessly with Windows until recently, I booted up in Se7en and my mouse no longer worked, I can't find any trace of bluetooth peripherals on the computer, in "Administration tools" and "Hardware manager" (or whatever it's called) I can't see a sign of my Broadcom Bluetooth adaptor. The bluetooth drivers are installed and I can see that in "Add or remove programs" so I don't know how to fix this. I already tried reinstalling the drivers from the boot camp DVD, and I also uninstalled Boot Camp, reinstalled it and updated it. Nothing works. If you have any ideas apart reinstalling Windows I would really appreciate because using my trackpad on a desk while having a Magic Mouse on the side (especially in Windows the trackpad *****) is driving me nuts. Thanks
Scott

Hi eg1978
Welcome to the HP Forums! I see that you are having issues with your two finger scrolling. I have a couple of things for you to try. This HP document Using and Configuring the TouchPad has a section on Turning individual gestures off and on and make sure that the two finger scrolling is enabled. If that does work then reinstall your Synaptics TouchPad Driver.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Magic Mouse no longer works on desk surface (varnished wood)

My magic mouse used to work fine without a mouse pad, but recently has become almost non-functional. As I move the mouse around on a varnished wood surface, it now seems to lag badly, almost stopping completely despite contined movement of the mouse. I've tried trashing the prefs, uninstalling MagicPrefs, reinstalling MagicPrefs, dumping MagicPrefs for BTT, etc. Nothing seems to work. I do have to regularly clean the plastic tracks on the bottom due to a buildup of dust, etc, but that, too, does not improve my performance. Does anyone have other suggestions for how to fix this problem? It would be a shame to have to use a different mouse.

WildBill,
I'd use a Q-tip and clean the laser light and sensor. Try new batteries (not rechargeables) and look for anything causing interference on the 2.4 mhz band.
I had this problem with a mighty mouse where it would only track on magazine or something with lots of color variation. I eventually just replaced it.
Regards,
Captfred
Edit: One addition thought. If you use the program USB overdrive, it's known to cause conflicts.
Message was edited by: captfred

Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

Headphones no longer work after ios8 update to Iphone 5

My plug in head phones no longer work after updating to IOS8. I thought it was the head phones and bought new ones - they don't work either. I updated my iPad and both head phones work. Phone is IPhone 5 - not due for an upgrade until December. Any suggestions?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

Airport not working after osx update-keychain?

Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
"Confirm Application Change
Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
This chain is permanent and affects all keychain items used by aiport.
Don't Change Change All
What should I have replied? Anyway to reset the airport or download it again?
Thanks.
Anyway to reset this or download again? Thanks.

What should I have replied?
Change All

CP60-615DX Touchpad and external mouse no longer work after WIndows 7 SP1 update

Let me start by saying I am in the IT field, though clearly far from being great at it. I was updating a CP60-615DX at work with Win 7 x64 SP1. It installed with no errors or anything I'd consider abnormal. Once it was finished, the touchpad no long worked, as well as any mouse I'd hook up via Usb. So I checked Device manager, and the Touchpad is listed with the yellow exclamation mark, as well as mice I hook up. So I did what any respectable IT guy would do, I went to HP and downloaded x64 drivers for the Touchpad port and installed them. But they didn't fix the issue, literally nothing happened. So I installed the latest chipset drivers. Still nothing changed. So I uninstalled the device and manually added it by doing the advanced driver install for a new device, pointing it to the directory where the .exe file had placed the drivers. ...Nothing. So I uninstalled SP1,.... nothing. After uninstalling SP1, redid every aforementioned step, nothing. So my question is, **bleep**? Anyone know another way to fix an issue where the scrolling devices stop working and the drivers won't fix the issue?
Btw, the user had never set up windows restore, and my only other thought is pulling personal documents off and restoring to factory defaults. One more bit of info before I forget, when I went into Windows Recovery (which loads a pre-environment mini OS for you to restore and fix issues), the mouse worked, telling me it's not a hardware issue, it's a Windows vs devices issue.

Hi,
According to your description, since system reinstallation is not helpful, it's probably a hardware problem, it would be better to check if it is the device itself problem.
Roger Lu
TechNet Community Support

Keyboard and Mouse no longer work after update

Earlier today I ran pacman -Syu for the first time since the 18th, and initially everything seemed to be working properly. However, upon my next boot, both my mouse and keyboard (both USB) no longer worked, leaving me stuck at the login screen unable to move the cursor or switch to a different terminal. Unplugging and reconnecting my keyboard and mouse did nothing.
A related topic (which could be solved by reconnecting the devices) suggested that booting with runlevel 1 might help, and this allowed me to use the terminal, but any attempt to start X resulted in getting stuck at login in the same way.
Disabling and re-enabling hotplugging via xorg.conf had no impact (there was a note in Xorg.0.log indicating that since hotplugging was enabled, mouse and keyboard drivers were being disabled. Apparently it's a fairly standard warning).
The only package that was updated that seemed to be input related was xf86-xinput, but downgrading to the previous version did not fix the problem.
Does anyone have any ideas as to what might have caused this issue?
Thanks for any help you can provide.

Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

Scrolling on Magic mouse no longer work after OSX update

Similar Messages

Maybe you are looking for