Scrolling/other gestures not working after Lion upgrade - Any suggestions?

So far the only gesture that seems to work on my iMac with Magic Mouse is the two fingered swipe to the left and right to switch between full screen apps / mission control / etc.
Scolling, double click to open mission control, etc do not work despite options selected in the Mouse preferences pane.
Have trie swapping mouse over but no joy and my Macbook, which is also upgraded works with no problems.
Any suggestions to try and get things working would be gratefully received.
Michael

I'm using a Logitech Performance MX mouse and after installing Lion, the calibration or whatever is messed up. For example, whereas before I would scroll the wheel on top of the mouse to move down the page or document, doing so now moves me UP the page (and vice versa, scrolling the wheel away from me toward the screen moves me DOWN the page). I don't see a fix for that in System Preferences. I can probably adapt, but should I really have to?
Yes, I know, Apple wants me to use the trackpad now rather than a mouse. Well, sorry. I am set in my ways.
When I open the Finder to find a photo, my windows are also inverted. Items that were at the top of the list are now at the bottom and I don't see any way of inverting back as you could before. What the...?

Similar Messages

Express Card on MBP Not working after Lion Upgrade

Since upgrading to Lion, the Express Card on my MBP (2009 model) is no longer working. Any card inserted does not show up on the finder. The Express card icon does show up on the menu bar and gives me the option to power off the card, but there's no way I founf to read the card anymore.
Disk Utility also does not see the card.
Any help available would be very appreciated.

heeynorton wrote:
@EZ Jim. Unfortunatley that did not help. I was very excited to try it as nothing else has worked, but to no prevail. I suppose I'll have to take it into the Apple Store.
The Apple Service Techs will surely be able to get it working for you. Regardless of how you proceed from here, be sure to make a current backup of all your important files first unless you already have done so.
If you have the time, and if you want to try one more thing before taking your Mac in for service, a complete Lion reinstall may fix your problem. If you did not do so before your initial Lion install, it may help to uninstall any PPC or Classic Apps. These kinds of apps cannot run in Lion, and could be a source of software conflicts. The easiest way I know to find PPC and Classic apps is to sort (by "kind") the list of Software > Applications listed in your Mac's System Information Utility.
Once you have uninstalled all PPC and Classic apps, reinstall Lion. If you need help, the instructions here explain how to reinstall Mac OS X while keeping your files and user settings intact: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1599.html
If the problem persists even after this reinstall, (unless you have a hardware problem,) a complete erase and reinstall of OS X should get your system working. The help article for this process is here: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1599.html Erase and reinstall will take much more time, largely because you will need to reinstall all apps and then reload your data files from your backups. To avoid the possibility or also restoring possible conflicts or problems, do NOT use migration assistant after erase and reinstall. Rather, reinstall each app from its own installer and manually copy data you need.

Time Machine does not work after Lion Upgrade

Hi all.
I upgraded my iMac to Lion yesterday. I used to run Time Machine through my airport extreme to an external hdd.
After the upgrade to Lion I'm unable to do this. When I try to setup Time Machine again, it is not possible to connect to the HDD throught the Airport Extreme. I do find the external HDD in Finder, but not able to access it.
The HDD is a Samsung 1 TB.
Is this a known issue and is it any possible fixes in the near future?
Thanks!

Hi
It probably doesn't help you directly but I have Lion performing time machine backups onto an external disk via airport extreme. Have you upgraded the firmware on the airport extreme recently?
Cheers
Tom

IMac external monitor not working after lion upgrade

Hi,
I have had an external monitor hooked up to my 09' imac for over a year now. I upgraded to Lion and ever since then it hasnt worked but one other random time when I moved and hooked everything back up. Im very tech savy, but this just doesnt make sense. Have combed google to find a solution. I have a Samsung 22in moniter and all the blue power button does is blinks at me. I am using a miniDisplay to DVI connection.
Does anyone have any suggestions other than resetting the ram?

I guess it's possible you've got some kind of hardware problem.... but not likley given it started with you installed your OS.
Here's a few things to try:
1. see if you can borrow another monitor just to be sure your monitor isn't the problem.
2. in System Prefs, and the Displays pane, click on the Detect Displays, then then the Gather Displays. If you get two diffenet display panes, that would lead me to think it's a monitor problem.
3. Lastly, disconnect your 2nd display, and restart. Then Shutdown, reconnect it, and see if that helps.
and of course..
4. make sure that all of your connections and adaptors are tight.

Back mouse gesture not working after Mavericks upgrade

Just upgraded to Mavericks.
No matter what website I'm on and no matter how many pages deep I'm in, the "one finger swipe" to go back a page is not working. It's acting like there are no other pages to go back to. However, when I click on the back arrow, it goes back like normal.
Anyone else have this problem?
Anyone else find a fix?

Found the solution.
Somehow during the upgrade, this gesture gets turned off in System Preferences. Go there, to Mouse, turn it back on. Back to normal!

Iphoto not working after Lion upgrade..please help

hi all
Can anyone help...
I just upgraded to Lion moments ago...however iphoto is dead...
this is the error message I get:
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Any ideas to help me out....
thanks
Dr Arsalan

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Hey there sarunelis,
It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
Thank you for using Apple Support Communities.
Regards,
Sterling

Scrolling/other gestures not working after Lion upgrade - Any suggestions?

Similar Messages

Maybe you are looking for