Scrolling page whilst using mark up tool ??

In acrobat 6 whilst I was using the polygon fill or rectangle tools, I could use my mouse wheel to scroll and zoom.
In acrobat 9 pro, when i am using any tools, i can't scroll or zoom. I have to move the mouse to the edge of the page to scroll which is painfully slow.
How do i change this back to how Acrobat 6 used to work?
Cheers

I can't believe this hasn't been answered.

Similar Messages

  • Quick question: How to get the scrolled page number using af:table

    Hi,
    When using range paging on scrolled table, how to get the current scrolled page number(1,2,3...), for example when moving the table vertical scroll bar forward or backward, is there any method in ViewObjectImpl class that I can use to get such information? I have seen the method scrollToRangePage(int i), but when scrolled ("Fetching data..."), it doesn't not get into this method. So it is wrong usage for this method, right?
    Thanks

    Didn't you just ask that question in this thread?: How to catch the page number when using scroll table in ADF 11g?
    A bit of patience might be in order.
    CM.

  • Delay whilst using/dragging link tool

    Hello, this is very annoying, I have an interactive .PDF document with small areas set aside for links to be inserted, when I select the link tool and click and drag (as per the help file "creating links using link tool") the link is created from the end drag point not where I started the drag, this is a...drag! And is very time consuming to then either re-do the link or I have to re-scale it and/or move it. I'm using Acrobat 3d version 8.
    Is there something I'm missing or doing wrong? It is happening on my work colleges PC too (Acrobat 8 pro.)

    Hi Eric,
    You should probably ask this question on the regular User-to-User forum, as this forum is specifically for 3D issues. I have Acrobat 9 Pro Extended installed, but I can tell you that when I use the link tool, if I drag down and to the right, the upper left-hand corner of the resulting box is my start point, which is what I expect. If I drag down and to the left, the lower right-hand corner is where I started, as expected.

  • Using mark up tools on second laptop

    I have been working with highlight and post it notes on my main laptop but am now working on my second computer in Italy which does not seem to have this facility.  The registration details are the same for both machines.  How can I get these tools to continue to work on the PDF file?

    Good day Dr. Mittler,
    It sounds like you're using Adobe Reader and you've got two different versions on your two computers.  Adobe Reader X added the sticky note and highlighter tools whereas Adobe Reader 9 did not have this function.
    I'd recommend downloading and installing Adobe Reader X from: http://get.adobe.com/reader/
    Please let us know if we can be of further assistance.
    Kind regards,
    David

  • How do I link to another anchored page using the point tool?

    Hello
    I am using the point tool (arrow tool) to link to anchors in my current page.  Is there a way of linking to anchors using the tool in another page (in others words one that I am not working on) or does it need to be done manually?
    Thank you
    Jake

    Arrow Tool???  Which arrow tool do you mean?
    Named anchors are deprecated in modern HTML standards.  To create links to content on the same page, set up some Div IDs like this.
    <section id="one">
         Content one goes here...
    </section>
    <section id="two">
         Content two goes here...
    </section>
    <section id="three">
         Content three goes here...
    </section>
    LINKS ON SAME PAGE:
         <a href="#one">Link 1</a>
         <a href="#two">Link 2</a>
         <a href="#three">Link 3</a>
    LINKS ON DIFFERENT PAGE:
         <a href="page_name.html#one">Link 1</a>
         <a href="page_name.html#two">Link 2</a>
         <a href="page_name.html#three">Link 3</a>
    Nancy O.

  • How to use the design tools in pages 5.2 on Macbook Pro

    How do you use the alignment tools for placing and inserting images in pages 5.2?

    Hi Ivy Janelle,
    Thanks for visiting Apple Support Communities.
    In Pages 5, you can insert images using the Media browser at the top of the document window. Once you insert them, you can edit and arrange images using the Format inspector--the paintbrush icon in the top right. You can find detailed information about inserting and using images at these links:
    Pages for Mac 5.0: Add and edit images
    http://support.apple.com/kb/PH15345
    Pages for Mac 5.0: Align and position objects
    http://support.apple.com/kb/PH15351
    Best Regards,
    Jeremy

  • How to set a foot in a scrolling page site, that it remains visible even when scrolling, using PC

    how to set a foot in a scrolling page site, that it remains visible even when scrolling, using PC

    Hello,
    Please select the footer items and Pin them to the bottom like the screenshot below.
    Regards
    Vivek

  • How do I turn off the alt scroll zoom?  When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    How do I turn off the alt scroll zoom? 
    When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • Can't use the Zoom Tool to set the Magnification level of pages to diff sizes from the preset ones

    Hi, I am trying to use the Zoom Tool and "Set Magnification" on my Dreamweaver CS5.5 in order to view my pages at different magnifications when working on them.  My problem is that I need to use different sizes than those sizes that are available under the preset magnification levels list (which are for example 100%, 150% or 200%).  These are the ones that  come up on the zoom pop-up menu.  The dreamweaver tutorial says that I need to type in the size I want (e.g. 115% or 130%) in the "zoom text box" and it will then apply that size to the page but the box does not let me change whatever size is currently in it.  I can’t override or delete whatever preset size is in the box or do anything to change the zoom from the pre-set levels! I would really appreciate some help with this thanks

    Hi Ben, thank you for the reply, unfortunately that was one of the pages I was looking at to try and fix this issue but it is of no help. 
    The page says for zooming in and out of a page to "Type a magnification level in the Zoom text box.".  My dreamweaver will not let my type a manficiation level in the zoom text box.  It just won't let me override whatever is in the box (e.g. 100%) so I can't change it from the default pre-set magnification levels. It is so frustrating!
    Does anyone else have any other ideas?
    Thanks
    Rachel

  • Hi, the minute is use the alpha tool, that round colorful ball comes up and pages quits right away

    as soon as i use the alpha tool, page quits out of the program

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • Cannot see entire page without using the bottom scroll bar.

    Cannot see the entire page without using the bottom scroll bar. Unfortunately some websites do not have the scroll bar and I am unable to complete my transaction because the area I need to click is on the right of the screen and that does not show on my page. If I change the view, the font is to small and it is blurry making in illegible.

    Weird. Be sure zoom is to default value (press Ctrl+0 -zero- in FF). In addition, restart FF in safe mode, maybe an add-on is the culprit.

  • Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

    Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

    Hi daneeo, and welcome to the Lenovo User Community!
    In the Control Panel for your Mouse there should be an UltraNav tab. Under that tab are all the settings for the touchpad. Check to make sure scrolling is enabled.
    If you do not see an UltraNav tab in the Mouse Control Panel, download and install the UltraNav driver and utility:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66898
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
    Hope this helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Cs5 crashing whilst using selection tool - pls help

    hi
    does anyone who how to fix this problem when using the selection tool? Photoshop seems to crash each time i use the selection tool, even if the thing im selecting is fairly small, i have tried deleteing the ps preferences file, turned off open gl and turned off export to clipboard...
    is there anything else i should be doing as this is VERY annoying and keeps losing my work! Especially on an imac as it crashes the whole computer and i have to power off and on again..
    Any help would be very much appreciated...
    cheers
    sarah

    You must have some system related problem there causing that. On mac Photoshop never crashes the Operating System on its own.
    • First of all do a system update, make sure that you have updated your Operating system to its most recent version - Software Update.
    • if you have already done the above - then run Onyx
    http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
    everything apart from 'rebuild databases' in the automation menu
    • After you have done this you may need to trash Photoshops Preferences, to start Photoshop with a clean slate.
    General advice with macs is that although these days they are very reliable, its still best to do these maintenance tasks every once in a while. For tip top speed of operation as much as anything else. Unfortunately people get a little lax on these tasks, now things are so generally reliable.

  • ***Cant Scroll through fonts using arrow keys

    when trying to preview different fonts in AI i am unable to scroll through them using the arrow keys, it just doesnt move... can anyone tell me whats wrong? im sure its pretty simple but i have no idea how to fix it...if it can be fixed... oh im using cs3 and a mac on os x leopard

    you cant scroll through fonts in photoshop too. the scrolling stops on an item of the list (maybe photoshop has problem with it), and 1. in photoshop, you can't jump over it, you have to manually place the selection on the item after the one that blocked the scrolling, 2. illustrator will jump backward and you will keep scrolling about max 5-6 fonts over and over.
    the font groups divided with lines are meaningless. it doesn't have any relation with regional keysets or any good reason.
    a lot of unusable font f....d into the middle of the page.
    i have to scroll over a dozens of unusable system fonts, what I cannot uninstall from Windows.
    no font management at all.
    and yes waiting for another 300$ upgrade too.
    (plus another upgrade for a flash, because flash drawing tools didn't see upgrades in their whole lifetimes.
    these tools are covered with bugs from top to toe. because nobody takes care of them. 300$ / 1bug.)

  • Spacing Issues when Using Touchup Text Tool Acrobat 9.4.5

    After installing the 9.4.5 update, I added some page numbers to the last few pages of a document, then I updated a page to change a date using the touch up tool and saved the document.
    Now, spaces appear beginning on the pages where I added numbers. I have been able to duplicate this process with others who have completed the upgrade to 9.4.5. It appears that Using the Text Tool is the glitch creating these extra random spaces.
    Is there a fix for this?

    At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
    When editing in Photoshop just add a box or mark on the image, for your tests.
    - If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
    - If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

Maybe you are looking for