Scrolling problem with integrated ALV in ITS-Mobile Service

Hi everybody,
I have integrated an ALV in my ITS-Template. If the ITS-Service is called from a device with smaller display then a average monitor, the ALV does not fit onto the screen. So the problem is that I am actually unable to get the ALV to use the integrated scrolling, unless the amount of lines is greater then 500.
Does anybody know how to set the amount of lines so the integrated scrolling buttons work with an amount of line smaller then 500?
Thanks in Advice.

Hi Stefan,
Is the ITS-Service an ITSMobile service or an IAC? If it's an ITSMobile Service - what generation STYLE was used to generate the HTML templates in SE80?
Following two notes maybe useful:
1037715 ITSmobile: Supported screen elements
(see section on the parameter: ~ALVGRIDPAGESIZE)
1668784 ITSmobile: new features for ALV Grid
Regards,
Oisín

Similar Messages

Problem with printing ALV lists

Hey Guys,
I have a problem with printing ALV lists ,
I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
How can i print them all in one page?
Thanks in advance
Noha Salah.

Hey Max,
I tried setting the Layout-list_append before my block_list_append function call
And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
to their original format?

HT204088 i am having a problem with my previous payment, its not excepting it?

i am having a problem with my previous payment, its not excepting it?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
If you just purchased the software and the redemption codes are coming up as invalid then the seller needs to resolve that. If you were able to acquire the serial number by redeeming the redemption code, then you should follow the seller's advice and contact Adobe support thru chat (when they are available).
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache. If it fails to connect try using a different browser.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

HT1222 hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.

Problem with Integration Directory

Hi,
I have problem with Integration Directory while connecting it showing the fallowing Error.any body help me with some solution thanks in advance.
Application cannot be started!
Details: com.sap.engine.services.ejb.exceptions.deployment.EJBConfigurationException: Exception while reading index of JAR file aii_ibdir_sbeans.jar in application sap.com/com.sap.xi.directory from the Configuration.
     at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2322)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:370)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:323)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:118)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:219)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4345)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2465)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2338)
     at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:141)
     at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:101)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: -9,223,372,036,854,766,508,
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:83)
     at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:60)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:879)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.getCachedConfiguration(ConfigurationHandlerImpl.java:371)
     at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getData(ReadAccessConfiguration.java:84)
     at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getConfigEntry(ReadAccessConfiguration.java:848)
     at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2320)
     ... 15 more
Caused by: java.sql.SQLException: [NWMss][SQLServer JDBC Driver]Connection reset by peer: socket write error
     at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCRequest.submitRequest(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCNonCursorExecuteRequest.submitExecute(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCExecuteRequest.execute(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.SQLServerImplStatement.execute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
     at com.sap.nwmss.jdbc.base.BasePreparedStatement.executeQuery(Unknown Source)
     at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:270)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:241)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration(DBAccessDefault.java:604)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:77)
     ... 21 more
Thanks
kiran.B

Kiran,
Start you J2EE engine visual administrator.
Choose Cluster--> server ---> services ---> deploy
Here there will be one application/service named "directory" (dont remember the exact name).Please start that service and your problem should be solved.
Thanks,
Anand

Problem with Integration Repository

Hi,
I have problem with Integration Respository.when i am trying to connect it showing the fallowing.
Application Digital Signature can not be verified. you want to run the application.
when i click on run it showing
Unable to launch the application.
The details of Error is given below.
Launch File :
<jnlp spec="1.0+" codebase="http://ps3181:50000/rep">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Repository</description>
        <description type="short">Repository</description>
        <description type="tooltip">Repository</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="512m" />
        <jar href="repository/aii_ibrep_client.jar" />
        <jar href="repository/aii_ibrep_core.jar" />
        <jar href="repository/aii_ibrep_sbeans.jar" />
        <jar href="repository/aii_ibrep_rb.jar" />
        <jar href="repository/aii_ib_client.jar" />
        <jar href="repository/aii_ib_core.jar" />
        <jar href="repository/aii_ib_sbeans.jar" />
        <jar href="repository/aii_ib_rb.jar" />
        <jar href="repository/aii_proxy_gen.jar" />
        <jar href="repository/aii_map_api.jar" />
        <jar href="repository/aii_mt_base.jar" />
        <jar href="repository/aii_mt_rb.jar" />
        <jar href="repository/aii_mt_rt.jar" />
        <jar href="repository/aii_util_icons.jar" />
        <jar href="repository/aii_util_swing.jar" />
        <jar href="repository/aii_util_xsd.jar" />
        <jar href="repository/aii_util_xml.jar" />
        <jar href="repository/aii_utilxi_misc.jar" />
        <jar href="repository/aii_util_rb.jar" />
        <jar href="repository/aii_upload_core.jar" />
        <jar href="repository/aii_upload_sap.jar" />
        <jar href="repository/clientaii_ib_sbeans.jar" />
        <jar href="repository/clientaii_ibrep_sbeans.jar" />
        <jar href="repository/frog.jar" />
        <jar href="repository/focus14.jar" />
        <jar href="repository/sapxmltoolkit.jar" />
        <jar href="repository/jta.jar" />
        <jar href="repository/ejb20.jar" />
        <jar href="repository/exception.jar" />
        <jar href="repository/logging.jar" />
        <jar href="repository/guidgenerator.jar" />
        <jar href="repository/jperflib.jar" />
        <jar href="repository/tenComposite.jar" />
        <jar href="repository/tenGraph.jar" />
        <jar href="repository/tenGraphics.jar" />
        <jar href="repository/tenGenerics.jar" />
        <jar href="repository/tenGui.jar" />
        <jar href="repository/sapni.jar" />
        <jar href="repository/sapj2eeclient.jar" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="00" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="ps3181" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50004" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="000" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50004" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.directory.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.repository.mapping.additionaltypes" value="none" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8000" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="ps3181" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="000" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="ps3181" /><property name="jnlp.SAPMYNAME" value="ps3181_TD1_00" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50000" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="512m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="00" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="30_VAL_REL" /><property name="jnlp.rc.applname" value="REPOSITORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="200410262202" /></resources>
    <application-desc main-class="com.sap.aii.ibrep.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Exception :
java.lang.NullPointerException
     at com.sap.plaf.frog.FrogScrollPaneUI$1.propertyChange(FrogScrollPaneUI.java:113)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.awt.Component.firePropertyChange(Unknown Source)
     at javax.swing.JScrollPane.setHorizontalScrollBar(Unknown Source)
     at javax.swing.plaf.basic.BasicComboPopup.createScroller(Unknown Source)
     at javax.swing.plaf.basic.BasicComboPopup.<init>(Unknown Source)
     at com.sap.plaf.frog.FrogComboPopup.<init>(FrogComboPopup.java:34)
     at com.sap.plaf.frog.FrogComboBoxUI.createPopup(FrogComboBoxUI.java:185)
     at javax.swing.plaf.basic.BasicComboBoxUI.installUI(Unknown Source)
     at com.sap.plaf.frog.FrogComboBoxUI.installUI(FrogComboBoxUI.java:115)
     at javax.swing.JComponent.setUI(Unknown Source)
     at javax.swing.JComboBox.setUI(Unknown Source)
     at javax.swing.JComboBox.updateUI(Unknown Source)
     at javax.swing.JComboBox.init(Unknown Source)
     at javax.swing.JComboBox.<init>(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.JComboBoxExt.<init>(JComboBoxExt.java:22)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities.createComboBox(Guitilities.java:987)
     at com.sap.aii.ib.gui.personalization.CommonResource.getLoginLanguageBox(CommonResource.java:153)
     at com.sap.aii.ib.gui.login.SplashLoginFrame.<init>(SplashLoginFrame.java:166)
     at com.sap.aii.ib.gui.login.SplashLoginImpl.doSplashLogin(SplashLoginImpl.java:96)
     at com.sap.aii.ibrep.gui.appl.ApplicationImpl.main(ApplicationImpl.java:624)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sun.javaws.Launcher.executeApplication(Unknown Source)
     at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
     at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
kiran.B

Hi Kiran,
your XI J2EE engine is not properly initialized so you are not able to open IR....
just ask your Basis guys to see the startup log of your J2EE engine....if it has some errors, then just restart your J2EE engine.....then your this problem will be resolved....
also see in SMICM, whether ICM status is green or not..if not green then restart ICM from Administration->ICM monitor->restart->yes option of your XI server..
when XI restarts, just enquire from basis guys whether J2EE engine is up and running..... then open IR.....then your XI IR will open........
Thanks,
Rajeev Gupta
Message was edited by:
        RAJEEV GUPTA

CS5.5 Design Premium / Problems with "Apply today for its unique advantages"

English
Problems with "Apply today for its unique advantages," by clicking on any of the options available to redeem the link does not work.
Spanish
Problemas con "Solicite hoy sus ventajas exclusivas", al hacer click en cualquiera de las opciones disponibles para poder canjear no funcionan los link.

Pat76 wrote:
Hi, did anybody had already problems with the CS5.5 Design Premium Suite on OSX Lion? I purchased the software as a Volume licenced product recently and everything was working fine, until since few days my Indesign and Illustrator keep crashing on launch. I de-installed and re-installed the entire CS5 Suite on my iMac, but Indesign and Illustrator still keep on crashing while launching. I already rang the Adobe tech support but they are not very helpful at all... Its quite frustrating.
No problems here with CS5. After I upgraded to Lion I did update to 5.5 and still did not experience any problems. There are some handy articlles on Adobe's web site relating to compatability with Lion, but I have experienced none. Have you checked the third party plug-ins in Illustrator and InDesign for compatability if you have any installed?
Pete

XML fetch failed -- possibly a problem with AvXml.dll or its permissions

When attempting to access the Status Monitor I receive the following error message:
XML fetch failed -- possibly a problem with AvXml.dll or its permissions.
Check that the "AvXml" virtual directory settings in IIS have proper permissions and allow execute access.
I've tried all combos of security on the IIS directory. What am I missing?

Hi Lindborg
I have that problem with version 4.0 (X), it is due?, As I fix?.
Unity I have a failover cluster, I have several problems, sometimes not let me delete mailbox, I can retrieve messages.
thanks for any help you can provide.
Regard

Problems with Integrating SRM, ESS/MSS into one portal 7.01

We are having major problems with integrating SRM, ESS/MSS into one portal 7.01?
Do we need to have a support portal for each.
We created test users for systems but sometimes we lose the users for no apparrent reasons. Very strange. Please advise and if you have new documentation regarding SAP Portal Authorization it will be helpful.

Hi
Please search on SDN for integrating SRM, ESS/MSS in Portal.
Regards
Arun

HT201380 keep having scrolling problems with Maverick on both iMac and Mac Pro despite downloading mail software update

Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls again

The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

No - restrictions are not on...
and under privacy>location Services - just like before - I can´t change it here

Problems with a non-BT product or service

I have just contacted BT as my down IP Profile has become 30% less than it should be over an approximately 6 month period. This is despite the fact that my line is surprising stable with an average up time of around 14 days and the main disconnection being BT induced profile resets.
I have had this issue three times before. The solution is 1 to 3 Openreach Engineer visits that find no fault and end up with a line reset to up the profile.
This time the Indian call centre rang me, tested the line and found no fault (as expected). They said because of this they could not do anything and suggested I contacted second line support.
I then received the following email
"Problems with a non-BT product or service
Hi,
You recently contacted us regarding a non-BT product or service. We confirmed that your BT Broadband service and equipment were working ok but we were unable to help you with your product/service as it's non-BT.
We recommend that you check your user guide or contact your manufacturer regarding the product/service. Before you do that, check out these links below as they may help you further.
Happy to pay for technical support from BT?
BT has a team of technical experts. For a monthly fee they can help you with a range of problems. Go to www.bt.com/techexperts to find out more and sign up.
I am using a BT supplied OpenReach modem and HomeHub 4 A so other than devices connected to the HH4 all kit is BT supplied.
Can I have some (preferably Moderator) help on this please ?
Solved!
Go to Solution.

DavidM wrote:
Hi vofsanity2,
Thanks for posting. I can look into this for you. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
I am pleased to say that thanks to moderator intervention I was contacted by Kevin who arranged for an OR Engineer visit.
As expected no fault was found and after a line reset to restore my profile to what it should be (actually slightly better) my 30% drop was corrected.
It is fairly clear that if you have FTTC and a connection to the cabinet of 1200-1400metres then the DLM is happy to reduce your line speed but reluctant (if at all) to increase it. This means your profile decreases over time and has to have a manual reset.
The worrying development this time is that now when the helpdesk tests your line and finds line speed and profile match they assume you have a problem with a non-BT product or service where as previously they accepted that a 30% drop in profile was a BT Fault.

I have a problem with my home butten, its working but when i press it, it seems like something is stuck in it. like sand or something like that, and this is the second time it happens to me with 2 devices. what can i do?

Ok so first sorry for my english, Im not American.
2 months ago i bought a new Iphone 4 device from my phone company, after a month something happened to the home butten, when i pressed it it felt like something stuck in it.. like sand or dirt.. but the home butten worked perfectly. so i went to the phone company and they told me that it is a problem and they replaced it with a new one. but after a week my iphone fell and something happened to him so i sold it to someone i know, and with that money i bought a new one from privet store (unlike the last time, when i bought my iphone in a big phone company) and in the begining it felt new, i didnt had any problems, but 2 days ago when i woke up i pressed the butten and i noticed that the problem with the home butten is back.. and i dont know what to do.. i mean like its not a big deal or something, it just that when i buy something new, i excpet it to be new, and i want to ejnoy it while its new.
so i went to some guy i know and he told me that he will see what he can do, i paid him 130 Shekels (35$) and he told my that he replaced the butten with new one, but still it makes problems. it bothers me alot, because i pay almost 300 shekels per month (75$) and i expect from this device to be new.. and its killing me.
now, i cant go to the phone company because thats not their device, and i know what the people in the privet store will tell me.. that its my fault and bla bla bla.. so what can i do? i cant spend any more money on this..
its new.. for some reason this always happenes to me.. 3 devices, problems problems and problems..

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

Mapping Problem with 2 ALV Tables after sorting

Hi,
I have a context node INCIDENTS with a sub-node SUB_INCIDENTS.
The sub-node is filled via a Supply Function.
Both nodes are displayed in separate ALV Grids on the same view, which works pretty well.
The only problem I face is when I try to sort one of the ALVs, then I get an error "The node specified in mapping ( SUB_INCIDENTS) could not be found ".
I have no clue how to solve that, already tried to fill the sub-node with the ALV standard function "ON_STD_FUNCTION_AFTE", no effect.
Does anybody can imagine what might be the reason?
Best regards, Steffen
Edited by: Steffen Weber on Aug 27, 2008 2:55 PM

In general, having two ALVs for parent and then a sub node is not supported. Here is a section from the online help that describes what happens when a sort occurs on the parent node in ALV:
Important Exception: Sorting
Here ALV has to use the entire dataset so that the data records can be arranged in the new order. For this purpose, the ALV component temporarily takes control of the internal data table and invalidates the corresponding context node of your application during this time. This ensures that the application cannot access the context node while the ALV component is editing the internal data table.
Once the internal data table has been resorted, ALV rebuilds the context node, releases it again for the application, and displays the data accordingly.
This ensures that the internal data table is never copied. This is important because large volumes of data would considerably impact performance and memory space.
When you are planning your application, note the following side-effects of this mechanism:
● When the context node is invalidated, information about current selections, and in particular the lead selection, is lost.
● If your application has created subnodes for the context node, (master-detail scenario), these subnodes are lost as soon as the ALV component invalidates the context node. If the application then tries to access the subnodes, a runtime error occurs.
Because of the invalidation that is described here, the subnode leadselection is lost and is invalidated as well. This leads to the error you are encountering.

Problem with printing ALV - repetitive page breaks

Hi,
I have a problem with ALV during printing or print preview. First, let me describe the situation. My requirement was to have a page break for every Material Number. This was working fine already. However, the user had a change of heart and decided he didn't want to have a page break for every material. Now, they wanted only one page for all materials.
I thought this was easy to do since I only needed to comment out the SORT (and all codes related to SORT) table that was used to create the page-break. Thing is, it's not working anymore. Although I was able to display one table only, the old page breaks still appear! For example, if there were 7 materials before, therefore, 7 page breaks with 7 blocks of internal tables. Now, only 1 full internal table is displayed while the other 6 are empty! Please help me how to get rid of the other tables or page breaks.
I hope this is clear. Thanks. I appreciate all the help I can get.

Amit,
Using sort option.
Do one thing. Just create one ALV program with SORT options anf GROUP = '*'.
Now go to output and save the Variant. Print the report.
with out sort option and variant.
Now come back and Delete the sort options , activate the code.
And see the output. Choose the variant which you created beofre. and print the report.
See both the case. it triggeres the same output. you just copy paste it and un comment the commented sort code
Just test with this code,
REPORT zalv_total_sub.
TYPE-POOLS: slis.
INCLUDE <icon>.
DATA: layout TYPE slis_layout_alv .
DATA: BEGIN OF it_flight OCCURS 0,
       carrid LIKE sflight-carrid,
       connid   LIKE sflight-connid,
       fldate   LIKE sflight-fldate,
       seatsmax LIKE sflight-seatsmax,
       seatsocc LIKE sflight-seatsocc,
      END OF it_flight.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
          wa_fcat LIKE LINE OF it_fieldcat.
DATA: it_sort TYPE slis_t_sortinfo_alv,
          wa_sort LIKE LINE OF it_sort.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
    i_program_name         = sy-repid
    i_internal_tabname     = 'IT_FLIGHT'
    i_inclname               = sy-repid
CHANGING
    ct_fieldcat              = it_fieldcat
EXCEPTIONS
    inconsistent_interface = 1
    program_error          = 2.
SELECT carrid
       connid
       fldate
       seatsmax
       seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_flight
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
WHERE fieldname = 'SEATSOCC' .
CLEAR wa_fcat.
*wa_sort-fieldname = 'CONNID'.
*wa_sort-up = 'X'.
*wa_sort-group = '*'.
*wa_sort-subtot = 'X'.
*APPEND wa_sort TO it_sort.
*CLEAR wa_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program      = sy-repid
    i_save                         = 'X'
    i_callback_user_command = 'USER_COMMAND'
    is_layout               = layout
    it_fieldcat             = it_fieldcat
    it_sort                 = it_sort
TABLES
    t_outtab                = it_flight
EXCEPTIONS
    program_error           = 1.

Scrolling problem with integrated ALV in ITS-Mobile Service

Similar Messages

Maybe you are looking for