Scrolling SSL message in PS Unix Process Scheduler PSAESRV log file
This message is being spammed to the AESRV log file and it's doing it's best to fill up the partition. We recently migrated to new hardware, and it looks like the problem started day 1 from there. There are no other known issues at the moment. Any idea what's causing this, how to stop it and/or how to put a muzzle on it?
Here's the line:
PSAESRV.15511 (2) \[08/24/09 00:06:06 <USERNAME>@<SERVER> RunAeAsync2\](2) Invalid or No 'CA' entry in SSL Config File
$ grep "entry in SSL Config File" AESRV_0824.LOG|wc -l
11799608
Environment is HR89 8.47.12
SunOS 5.9
Edited by: user7342576 on Aug 24, 2009 1:51 PM
Where do you upload the root certificates to the DB? I now think this issue may be arising out of some custom encryption that was done a while back and has since progressively gotten worse with higher utilization. Any idea where the root certificate would be found for a custom encryption project?
Similar Messages
-
Getting error while posting reports on Unix Process Scheduler Server
Hello ,
I am getting the below error while posting reports on Unix Process Scheduler Server .
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
Please advise ,thank you.user5838027 wrote:
Node name :PS_HTTP
URL: http://ddas1020.dev.com:16000/psreports/hrdmo
URI:SchedulerTransfer/hr90dmo
URI Port: 16000
Please let me know if any other info is needed.
Thanks.
typo...
URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
Did you also tried to give the web login/password ?
Nicolas. -
Print a custom Error message in the XML bursting program's log file...
Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
RagulHi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul -
ATSServer fatal exception- runaway syslogd process & massive asl.log file
Hi All,
(in lieu of a bug report)
My MacBook has recently started to go unresponsive (beachball of death), with only cursor movement and the clock indicating it wasn't frozen (Cmd-Opt-Esc didn't work either), forcing me to hard restart. When this happens Activity Monitor shows syslogd hogging all the CPU, and inactive memory climbs until it maxes out after which the fans kick in and soon after the computer goes unresponsive. I checked Console and found a 1GB+ asl.log file (which has now mutated into a new file for each instance), with pages of this message (all same time stamp, 3 examples listed):
[Time 2007.11.16 03:39:43 UTC] [Facility user] [Sender /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer] [PID -1] [Message FOExceptionMainHandler caught a fatal exception at 0x00018d03;] [Level 3] [UID -2] [GID -2] [Host oli-studholmes-computer]
[Time 2007.11.16 03:26:10 UTC] [Facility user] [Sender /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer] [PID -1] [Message FOExceptionMainHandler caught a fatal exception at 0x00018d03;] [Level 3] [UID -2] [GID -2] [Host oli-studholmes-computer]
[Time 2007.11.20 07:19:21 UTC] [Facility user] [Sender /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer] [PID -1] [Message FOExceptionMainHandler caught a fatal exception at 0x00018d03;] [Level 3] [UID -2] [GID -2] [Host oli-studholmes-computer]
My only workaround is to force-kill the syslogd process. Since this happened I've updated from Mac OS X 10.4.10 to 10.4.11, but the problem hasn't stopped. I haven't recently installed any other software.
I first noticed this trying to open a file containing Japanese text in TextMate, which led me to this page:
http://d.hatena.ne.jp/hetima/20061102/1162435711#c1184639718
(basically others having the same problem, using the same workaround, and the last comment saying it also happens in other text editors and looks like a system bug).
At this time I did a Disk Utility repair which found errors and repaired them (although I had to do the repair via Target Disk Mode as I couldn't boot from the Tiger install DVD and even the verify process would fail due to an underlying process (i think it was diskutil-can't remember) hanging). Also because there was the suggestion of a font problem I checked my fonts with Font Book (all ok), and cleared font caches with Font Finangler (this was all pre-10.4.11 update).
I'm going to go to the Apple store once I back everything up. I'd be interested if anyone else has seen this, and if so if it was related to Japanese fonts or not.
peace
PS how do I prevent Jive from turning all those nice square brackets into links I wonder? the pretag in square brackets doesn't do it, and [code] isn't enabled...
PPS this link to a [Mac OS X 10.3 ATS Services bug report|http://daringfireball.net/2005/03/fontcaches_gonewild] might also be relevant
Message was edited by: Oli Studholme (adding PSs
Message was edited by: Oli StudholmeI have a problem with safari just quitting on me. the safari window will close. a new window comes up saying safari quit unexpectedly and ask if it want to report it. I repaired permissions, a few things came up. Ran the repair. It seems to have cleared up the problem.
Thankyou very much. -
Schedule report (log file)
hi,
Could anyone give me idea when we schedule BO jobs(reports), any log file is created?
RegardsGreetings,
I am using BOE XI 3.1 SP2 FP2.4 and am trying to diagnose an intermittent issue with email notifications.
I have attempted to find Adaptive Job Server logs, but cannot. I see many logs, but none for that server.
Here is my Adaptive Job server parameter list...
-loggingPath "C:/Business Objects/BusinessObjects Enterprise 12.0/Logging/" -objectType CrystalEnterprise.JavaScheduling -maxDesktops 0 -classpath "C:/Business Objects/common/4.0/java/lib//external/certj.jar;C:/Business Objects/common/4.0/java/lib//external/jsafe.jar;C:/Business Objects/common/4.0/java/lib//external/asn1.jar"
Likewise, I have Auditing enabled on the Adaptive Job Server, and all of the auditing events flagged.
Am I missing a parameter that would create the missing logs? Or is the log just not called 'Adaptive Job Server'?
Please point me in the correct direction... your guidance will be greatly appreciated..
Regards,
Dave -
I am getting the below error while bringing up the Process Scheduler error
Hello ,
I am getting the below error while bringing up the Prcs Scheduler.
Cannot open message catalog TMADMIN_CAT
Starting Process Scheduler Server PSNT for Database FSUAT ...
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
tart -S PSDSTSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmshutdown -y
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
Please suggest.Duplicate thread :
Re: I am getting the attached error while bringing up the Prcs Scheduler
Nicolas. -
Process scheduler picking up trace settings that are not currently on
I'm running a custom application engine program. I tested the program in the same instance last week with a full trace turned on. The trace was turned on under processes. I've since refreshed the database and dumped the process scheduler cache (Unix process scheduler). After the refresh, I turned off the process trace. I ran a quick test of the program to see what the trace settings are. To my disappointment the full trace is still showing at the end of my parameters list in the process monitor. I've tried forcing a trace -0, the parameters will not change. It's very, very strange. Unforuntately, I have to process a lot of data using this application engine program using CI. Is there any other area in Peoplesoft that I might be forgetting that an application engine trace can be turned on?
How have you refreshed the database ? How did you re-apply your customization after refresh ? How is defined the prcs ? Did you change the prcs configuration file to set the trace off ? Did you checked the process definition ?
Nicolas. -
Writing messages to log file from database procedures
Folks,
Is there a way by which I will be able to write messages from a database procedure to a log file? I would like to know what a procedure is doing and if it has failed or suceeded just as we do in a Unix shell script where we can direct messages to a file.
e.g. echo 'step 34 completed' >> $X_LOG
Is there a log file in Oracle where we can check if a procedure has failed and what was the error. I am using Oracle 9i.
Thanks.Hello,
I do not agree. have you taken a look at Oracle9i Supplied PL/SQL Packages and Types Reference?
You can use UTL_FILE and DBMS_OUTPUT to achieve exactly what you want.
Rgds
Fidel -
SQLScript , writing messages to log file
Hi,
We're developing SQLScript and executing them directly on Unix via Unix command HDBSQL. We use the -o keyword with HDBSQL to write messages like comments, custom errors into a log file. The only way we know how to force custom messages into the log file is the SELECT "Text" FROM DUMMY.
Now our SQL consists of multiple procedures that may be called in a nested fashion i.e Proc 1 calls Proc 2 which in turn calls Proc 3. We noticed that the SELECT FROM DUMMY way of writing comments into the log only works if the procedure is the first procedure in the line of nested calls(Proc 1). SELECT FROM DUMMY from a sub/nested procedure does not make it to the log file.
Is there any other way we can achieve this? Other DBs have options like DBMS.output which work well in such scenarios.
I would like to thank this group for being ever so helpful in all the issues we have faced so far.
Regards,
NehalHello,
I do not agree. have you taken a look at Oracle9i Supplied PL/SQL Packages and Types Reference?
You can use UTL_FILE and DBMS_OUTPUT to achieve exactly what you want.
Rgds
Fidel -
SMS_NOTIFICATION_SERVER process Active Transaction preventing SQL log file backup
Hello,
I have been working on adding a few thousand machines into our SCCM 2012 R2 environment. Recently after attaching several of these systems there was a spike in activity in the transaction log due to the communication and inventory of these new
machines. The log file would fill up quickly but the log file backup would not function and allow the reuse of the log file. Upon investigation by my DB Admin we noticed that the SMS_NOTIFICATION_SERVER process was holding open an Active Transaction
that would last 1 hour and then restart at the end of the hour. This process was essentially preventing the backup of the log file. In a test, I briefly turned off the SMS_NOTIFICATION_SERVER process and we noticed the transaction log file functioning
correctly. I have included a screen shot of the process in the SQL Activity Monitor. Has anyone experienced this issue and resolved it? Is there anyway to reduce the 1 hour time frame or change the behaviour so that the process releases the
log file for backup if the log is getting full?
Regards,
DaveWe had it in Simple only briefly yesterday when working on the issue. It is in Full recovery mode.
-
Process Scheduler UNIX - PSDSTSRV no post
Hello I have a trouble.
I have defined a Process Scheduler in UNIX… the processes and reports finish correct, but the distribution finishes incorrect… in the file stdout I have the following message:
OprId = VP1
PS_TOKEN=AAAAnwECAwQAAQAAAAACvAAAAAAAAAAsAARTaGRyAgBOZwgAOAAuADEAMBQa2m1pVz/gsTCheZFtS1f62cS47wAAAF8ABVNkYXRhU3icHYpLDkBAAEPfILN0ExPzQRwAO5mE2Fq6pMOpaZPXpinwmKpuMEjV+9NykfGWhZ2tVT9YObk15ESgl2c6MRSmQo8janEMSqfH78jEyAcNZwp8
The XML file returned by the web server is invalid. (63,94)
XML document object creation failed. (63,102)
Unable to process HTTP reply from Report Repository. (63,73)
=================================Error===============================
Message: Unable to post report/log file for Process Instance: 7075, Report Id: 5359
Process Name: AEMINITEST, Type: Application Engine
Description: Programa Simple Pruebas AE
Directory: /psoft/pt849/appserv/prcs/fs9dmo/log_output/AE_AEMINITEST_7075
=====================================================================
Can anybody help me?Its hard to tell why report distribution fails , there is a lot of criteria that needs to be in place to make it work.
Does the user have process scheduler admin/report distribution admin roles assigned ?
Is local node setup with user id/password ?It could be unix report node definition pointing to an incorrect location.
what is the reports location in web server config.properties file ? -
Hi,
Does any one have the scripts for sending a Message if the Process Scheduler doesn't start up on Windows?
I wrote a script on UNIX server which sends an email if there's any error or if the Process Schedulers go down. CRON job runs the script to check the status of the Process Scheduler.
I usually look at the Task Manager whether the services are running or not on Windows. I never wrote a script to look at the Process Scheduler Services on Windows.
I am looking for script which sends an email when ever Process Schedulers running on Windows GO DOWN or SHUTS DOWN or Don't start up Properly.
Any help would be appreciated.
Thanks,
Chris
Edited by: user7384419 on Apr 15, 2009 8:17 AM
Is there any equivalent for "PS -ef|grep" on windows 2000http://technet.microsoft.com/en-us/sysinternals/bb896682.aspx
and/or
http://www.jigsawboys.com/2007/02/21/script-to-check-if-a-windows-service-is-running-and-email-a-user-if-it-is-not/
Nicolas. -
App Server and Process Scheduler stuck while booting
Hi All,
We are facing a big issue in our production instance.The application server showed down while accessing the PIA.When we tried to reboot the same it didnt start and was getting stuck after some steps..few snipets are below after the last PSSRENSRV process does not proceed further.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5584 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5600 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5616 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5632 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5648 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5664 Assume started <pipe>.
exec PSRENSRV --A -- -C psappsrv.cfg -D FNPROD -S PSRENSRV:The tuxedo,appserv and renserv logs shows,
renserv log
----- Begin booting PSRENSRV -------------------------
0.5608 [14/Jul/2011 07:51:54](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.5056 [14/Jul/2011 07:58:47](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.780 [14/Jul/2011 08:21:04](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.------------------------------------------------------------------------------------------
tuxedo log
receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.5060.5084.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4364.1752.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4472.4416.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.1684.4128.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4256.4172.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4876.496.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4896.4284.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4800.1036.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:703: ERROR: Cannot get statistics on message queue 43
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
082104.UKLO2K3S55!WSL.3904.4032.0: WSNAT_CAT:1197: INFO: Exiting system
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 61480 (errno = 22)
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1197: "INFO: Exiting system"
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=2,buf=9580216,bytes=4572,type=-1073741824,flag=2048
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving------------------------------------------------------------------------------------------
app serv log
PSADMIN.4944 (0) [07/14/11 07:48:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.4720 (0) [07/14/11 07:48:33] Starting
PSADMIN.4944 (0) [07/14/11 07:52:29](0) End boot attempt on domain FNPROD
PSADMIN.4944 (0) [07/14/11 07:55:46](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.1412 (0) [07/14/11 07:55:50] Starting
PSADMIN.4892 (0) [07/14/11 08:08:07](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.5032 (0) [07/14/11 08:08:13] Starting
PSADMIN.4892 (0) [07/14/11 08:08:27](0) End boot attempt on domain FNPROD
PSADMIN.6104 (0) [07/14/11 08:20:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.6124 (0) [07/14/11 08:20:32] Starting-----------------------------------------------------------------------------------------
tuxedo log
213815.UKLO2K3S55!PSSAMSRV.6072.6040.0: LIBTUX_CAT:262: INFO: Standard main starting
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: LIBTUX_CAT:262: INFO: Standard main starting
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=257,buf=10285048,bytes=4572,type=-1073741824,flag=0
214434.UKLO2K3S55!PSRENSRV.2440.2444.-2: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=277,buf=11551960,bytes=8668,type=805306369,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=257,buf=10285048,bytes=4572,type=0,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 33242 (errno = 22)
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
214434.UKLO2K3S55!BBL.5964.4464.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=258,buf=9654368,bytes=27996,type=-1073741824,flag=2048
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving
214507.UKLO2K3S55!tmboot.4616.5152.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
214507.UKLO2K3S55!tmboot.4616.5152.-2: TUXNT_CAT:4: ERROR: Cannot access ipc server (The system cannot find the file specified.
214507.UKLO2K3S55!tmboot.4616.5152.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
214508.UKLO2K3S55!PSADMIN.868: End boot attempt on domain FNPRODAlso the process scheduler was not getting booted the logs are shown below,
scheduler log
085646.UKLO2K3S55!restartsrv.2484.4116.-2: server BASE/101: CMDTUX_CAT:587: INFO: Cannot restart server, scheduling for cleanup
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:550: WARN: Cleaning up restartable server BASE/101
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 4300 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5372 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5640 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5768 died; removing from BB
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: 07-14-2011: Tuxedo Version 8.1 32-bit Windows.
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: GP_CAT:1077: ERROR: Unable to open environment file E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env for reading
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: LIBTUX_CAT:353: ERROR: Error putting ENVFILE E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env into environment
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: server BASE/101: CMDTUX_CAT:551: INFO: server removed
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 64479 (errno = 22)
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
085743.UKLO2K3S55!BBL.4044.5996.0: CMDTUX_CAT:26: INFO: The BBL is exiting systemIs this a problem with Tuxedo if so what has to be done...Pls help its a bit urgent...
Thanks in advance...First of all; if a problem is urgent then you should always contact Oracle support instead.
It looks like the domain is corrupt within Tuxedo. You could try to reconfigure the domain so that it will get recreated in Tuxedo. Make sure you have a backup before you do this. To reconfigure the domain simply open a CMD box and type the following command (from the appserver directory):
psadmin -c configure -d "DOMAIN_NAME"
You can only use this command for the application server. -
SOAP: Invalid SSL message, peer seems to be talking plain!
Hi All,
we have configured an SOAP Receiver Adapter to send the message to external thrid system from PI 7.11.
In the configuration we have imported the thrid party system certificate into NWA.
In the receiver agreement we have sleected the adpater specific Parameters.
after executing the scenario we are getting the following error in Runtime Workbench.
*SOAP: call failed: iaik.security.ssl.SSLException: Invalid SSL message,
peer seems to be talking plain!*
please let us know if we have missed any configuration.
thanks,
Lalitkumar.Hi Rahul,
Actually the path provided by the third party is some what like this;
https://xyz.abc.com:443/TRSimpleAgent.Process:receive
let me rephrase the scenario
IDOC -> PI -> Soap.
The data which is flowing in IDOC have to be mapped and XML file has to be posted to url which i have mentioned above.
The data has to be posted outside the landscape of the SAP Systems.
As if now we are able to get the file as a o/p of receiver mail adapter. now to post this file we have to ping the third party system using the soap receiver adapter. In the meanwhile we have configured the certificate which we got from them in out PI java stack.
When we execute the scenario we are getting the following error
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: iaik.security.ssl.SSLException: Invalid SSL message, peer seems to be talking plain!
SOAP: call failed: iaik.security.ssl.SSLException: Invalid SSL message, peer seems to be talking plain!
please help us in the following to resolve the issue.
Thanks in Advance.
Lalitkumar. -
SOAP Receiver via https - Error: Invalid SSL message, peer seems to be tal
Hi,
I have a SOAP Adapter that send a message to a HTTPS WebService.
I'm having the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Invalid SSL message, peer seems to be talking plain!: iaik.security.ssl.SSLException: Invalid SSL message, peer seems to be talking plain!
If I check the URL via Internet Explorer it showme a confirmation dialog with a security Alert, and ask me if I want to continue, then, I can reach the WS with any problem (from de IE).
I checked the steps of this PDF:
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
and all seems to be right.
Any bode can help me with this problem?
Thanks
MartinHello,
finally you run your request from your ERP System about your ICF.
To establish a SSL Connection to the Web Service target system about an SAP WebAS and ICF, it is necessary to create a certificate on client site about Internet explorer using target URL and importing it on STRUST. Take the junction "SSL-Client (Anonym)" to include your certificate for your system.
Take a reboot of ICM Monitor.
Then create a HTTP Connection to rhe external server via SM59 (Typ G).
Don't forget to configure the following points:
Under the menu tab Registration&Security:
- Registration Process: No Registration
- status of security protocols: activ and ANONYM SSL-Client (Anonym)
In most cases, you don't need to edit your user data.
Mostly only then one can usually connect about SAP XI or PI to some servers with SSL method.
Maybe you are looking for
-
Sharing music with other accounts - doesn't work?
Hi all, I followed the directions on the Apple website to share my music library with other accounts on my iMac: http://support.apple.com/kb/HT1203 I moved the library content (not my library files) from my private iTunes directory to a Public folder
-
Can i conect my xbox 360 to my iMac 27 inches?
can i conect my xbox 360 to my imac using thinderbolt ports?
-
Chance swatch panel to match illustrators
Is there a way to chance the Swatches Panel in Photoshop so it looks and works like Illustrators?
-
Instance Status Yellow on SAP MMC Console
Dear Experts, We are installing NW 7.0 dialog instance on Windowsx64 bit platform, Central instance is running on Aix64 bit, NW 7.0 Java add-in has installed on Central instance, I want to start only abap instance on new windows application server, i
-
Can't seem to stream (RTMP) an FLV file in Flash Media Playback from the Amazon Cloud
I seem to be having trouble streaming any FLV file using RTMP from the Amazon Cloud. Other file formats (i.e., MP4, F4V) seem to work just fine. I tried using your Flash Media Playback demo page and still had the same problem: http://www.osmf.org/co