Scrolling stopped working after Xorg update, already disabled hotplug

Heres my xorg file, everything works except for twofinger scrolling, circular scrolling, and regular scrolling. All three worked before the update. Also, gsynaptic will not open. It gives me the following error:
GSynaptics couldn't initialize.
You have to set 'SHMConfig' 'true' in xorg.conf or XF86Config to use GSynaptics
But as you can see, I already have SHMConfig set to true. Help
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "false"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
#RgbPath "/usr/share/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "freetype"
Load "glx"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse3"
Option "Protocol" "auto-dev"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "VertEdgeScroll" "true"
Option "HorizEdgeScroll" "true"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.25"
Option "MaxSpeed" "0.50"
Option "AccelFactor" "0.010"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "VertTwoFingerScroll" "true"
Option "HorizTwoFingerScroll" "true"
Option "EmulateTwoFingerMinZ" "90"
Option "TapButton1" "1"
Option "SHMConfig" "true"
Option "Emulate3Buttons" "on"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "gb"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "Coolbits" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by wankel (2008-12-07 05:09:02)

jarryson wrote:please have a look at wiki touchpad. you'll find what you want.
I read the wiki numerous times, but its still not working for me. For scrolling, I added
Option "VertEdgeScroll" "true" #vertical scrolling when dragging along the right edge.
Option "HorizEdgeScroll" "true" #horizontal scrolling when dragging along the bottom edge.
like is said but its still not working. And I thought that whole .fdi thing was only used if you have hotplugging enabled?

Similar Messages

My wifi stopped working after a update last year and I have updated since, can this be fixe

MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

BoardMaker plus 6 stopped working after OS update

My Boardmaker Plus stopped working after I update my system to OSi Yosemite. The disk just spins and spins and the program does not come up? Is anyone else having this problem? How can I fix it. I need to use the program for work.

I was worried about this, I still haven't upgraded. But while doing research I saw that there is now an online version, I wonder if it's the same ...

I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

Toupad Tapping and Scrolling stopped working after Windows 10 Upgrade

Hi, I upgraded my OC to Windows 10 today, after the upgrade tapping and scrolling stopped working on the synaptics touchpad. the toucpad only finctions as a pointer now. for taps/Clicks i always have to use the buttons below the touchpad. It was working fine before the upgrade, the earlier OS was Windows 7 I have checked for driver updates but i get a message that the drvier is up to date.I have check the device setting and confirmed that tapping and scrolling is enabled.I have also done a device reset. Nothing solved the problem, i also did not find a relevant answer on the forums.Also, the same problem did not happen with my other HP laptop (Notebook PC) which was also upgraded to windows 10 recently. Does anyone have a solution? Regards,Siddharth.

, Hello and thanks for posting on the HP support forums. What you will need to do is the run the Windows Update Fixer tool. Here is a link to help you with that. Make sure you run all updates including optional. Fix Microsoft Windows Update Issues If that fails to work the only other option is to roll your system back to the original supported operating system that came with your notebook. Thanks again for the post and have a great day.

N95 Map stop working after firmware update

I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
Need help please.

have u tried reinstalling the maps application?
u can get the latest maps application update from http://www.nokia.com/maps
download the application associated with ur n95 and install it using the pc suite application
if my post helped u out, please click the Star next to it to add some KUDOS to my name

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

HT4650 My keyboard has stopped working after an update of Flash Player. Help! What can I do?

Why has my keyboard stopped working after Flash Player update?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do things work in Safe Mode?

[solved] Touchpad scrolling and tapping stops working after Xorg 1.9

Hi all,
My laptop is an Acer Extensa 5630EZ and it has been running for over a year with Arch without problems. However, since the xorg 1.9 upgrade the touchpad edge scrolling just randomly stops working. Everything else continues working fine. I have searched the forums and Googled but haven't found anything that fixes it. Logging out and back into KDE gets the scrolling working again (X restart I guess). I'm pretty much stumped for ideas. Please help!
[edit]
- I edited the title for a more accurate description
- I noticed that tapping also stops working
- Note that it initially works but then randomly stops... as opposed to others' where it does not work at all.
/etc/X11/xorg.conf.d/10-synaptics.conf
$ cat /etc/X11/xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on"
Option "VertTwoFingerScroll" "on"
Option "CornerCoasting" "1"
Option "RBCornerButton" "3"
Option "LTCornerButton" "2"
Option "CoastingSpeed" "0.5"
Option "CoastingFriction" "0"
Option "EmulateTwoFingerMinZ" "40"
Option "EmulateTwoFingerMinW" "5"
EndSection
/etc/X11/xorg.conf.d/10-evdev.conf
$ cat /etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
touchpad part of X log
[ 36091.108] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
[ 36091.108] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 36091.108] (**) PS/2 Mouse: always reports core events
[ 36091.108] (**) PS/2 Mouse: Device: "/dev/input/event5"
[ 36091.120] (--) PS/2 Mouse: Found 3 mouse buttons
[ 36091.120] (--) PS/2 Mouse: Found relative axes
[ 36091.120] (--) PS/2 Mouse: Found x and y relative axes
[ 36091.120] (II) PS/2 Mouse: Configuring as mouse
[ 36091.120] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 36091.120] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 36091.120] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 36091.120] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 36091.120] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 36091.120] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 36091.120] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 36091.120] (II) PS/2 Mouse: initialized for relative axes.
[ 36091.121] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 36091.121] (II) No input driver/identifier specified (ignoring)
[ 36091.121] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 36091.121] (II) LoadModule: "synaptics"
[ 36091.122] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 36091.130] (II) Module synaptics: vendor="X.Org Foundation"
[ 36091.130] compiled for 1.9.0, module version = 1.3.0
[ 36091.130] Module class: X.Org XInput Driver
[ 36091.130] ABI class: X.Org XInput driver, version 11.0
[ 36091.130] (II) Synaptics touchpad driver version 1.3.0
[ 36091.130] (**) Option "Device" "/dev/input/event6"
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 36091.249] (**) Option "EmulateTwoFingerMinZ" "40"
[ 36091.249] (**) Option "EmulateTwoFingerMinW" "5"
[ 36091.249] (**) Option "VertEdgeScroll" "on"
[ 36091.249] (**) Option "CornerCoasting" "1"
[ 36091.250] (**) Option "VertTwoFingerScroll" "on"
[ 36091.250] (**) Option "RBCornerButton" "3"
[ 36091.250] (**) Option "LTCornerButton" "2"
[ 36091.250] (**) Option "TapButton1" "1"
[ 36091.250] (**) Option "TapButton2" "2"
[ 36091.250] (**) Option "TapButton3" "3"
[ 36091.250] (**) Option "CoastingSpeed" "0.5"
[ 36091.250] (**) Option "CoastingFriction" "0"
[ 36091.349] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 36091.349] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 36091.416] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 36091.459] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 36091.460] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 36091.460] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 36091.460] (II) Synaptics touchpad driver version 1.3.0
[ 36091.856] (EE) AlpsPS/2 ALPS GlidePoint no synaptics event device found
[ 36091.905] (**) Option "Device" "/dev/input/mouse1"
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
[ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 36091.916] (**) Option "EmulateTwoFingerMinZ" "40"
[ 36091.916] (**) Option "EmulateTwoFingerMinW" "5"
[ 36091.916] (**) Option "VertEdgeScroll" "on"
[ 36091.916] (**) Option "CornerCoasting" "1"
[ 36091.916] (**) Option "VertTwoFingerScroll" "on"
[ 36091.916] (**) Option "RBCornerButton" "3"
[ 36091.916] (**) Option "LTCornerButton" "2"
[ 36091.916] (**) Option "TapButton1" "1"
[ 36091.916] (**) Option "TapButton2" "2"
[ 36091.916] (**) Option "TapButton3" "3"
[ 36091.916] (**) Option "CoastingSpeed" "0.5"
[ 36091.916] (**) Option "CoastingFriction" "0"
[ 36091.937] (EE) Query no Synaptics: 6003C8
[ 36091.937] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 36091.937] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[ 36091.979] (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
[ 36091.979] (II) UnloadModule: "synaptics"
[ 36101.679] (II) intel(0): EDID vendor "LGD", prod id 502
[ 36101.679] (II) intel(0): Printing DDC gathered Modelines:
[ 36101.679] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 36113.812] (II) intel(0): EDID vendor "LGD", prod id 502
[ 36113.813] (II) intel(0): Printing DDC gathered Modelines:
[ 36113.813] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
Last edited by drsjlazar (2010-10-13 14:46:44)

I know about Google's Linux search but I hardly use it... I just add Linux to my search terms. Thanks for the reminder though.
My laptop is an Acer Extensa 5630EZ with an ALPS 'GlidePoint' touchpad.
Searching for problems that seem related to mine does not bring up much. Xorg 1.9 being new is probably the reason. I have gone through the updated installation guide and tried to get everything in order. Some pages recommend HAL, Xorg does not. But without HAL, I have no suspend/hibernate option in KDE and VMWare will not work. The problem appears even if I run DBus only without HAL. So I've decided to to just run HAL.
I have removed all the extra stuff I don't need at startup. Most notable is syndaemon in bashrc (totally forgot I had that). I have to wait for it to stop working since it is unpredictable. Though, I have noticed that it seems to stop working when I use keyboard shortcuts/combinations.
Here is my entire Xorg log after it stopped working:
[ 45238.439]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 45238.439] X Protocol Version 11, Revision 0
[ 45238.439] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 45238.439] Current Operating System: Linux extensa-arch 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
[ 45238.439] Kernel command line: root=/dev/mapper/AllPartitions-ArchRoot ro quiet splash
[ 45238.439] Build Date: 24 August 2010 01:44:37PM
[ 45238.439]
[ 45238.439] Current version of pixman: 0.18.4
[ 45238.439] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 45238.439] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45238.439] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 7 11:41:07 2010
[ 45238.439] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 45238.439] (==) No Layout section. Using the first Screen section.
[ 45238.439] (==) No screen section available. Using defaults.
[ 45238.439] (**) |-->Screen "Default Screen Section" (0)
[ 45238.439] (**) | |-->Monitor "<default monitor>"
[ 45238.440] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45238.440] (==) Automatically adding devices
[ 45238.440] (==) Automatically enabling devices
[ 45238.440] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 45238.440] Entry deleted from font path.
[ 45238.440] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 45238.440] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 45238.440] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45238.440] (II) Loader magic: 0x7d4880
[ 45238.440] (II) Module ABI versions:
[ 45238.440] X.Org ANSI C Emulation: 0.4
[ 45238.440] X.Org Video Driver: 8.0
[ 45238.440] X.Org XInput driver : 11.0
[ 45238.440] X.Org Server Extension : 4.0
[ 45238.441] (--) PCI:*(0:0:2:0) 8086:2a42:1025:013c rev 9, Mem @ 0xf4000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 45238.441] (--) PCI: (0:0:2:1) 8086:2a43:1025:013c rev 9, Mem @ 0xf4400000/1048576
[ 45238.441] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45238.441] (II) LoadModule: "extmod"
[ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 45238.441] (II) Module extmod: vendor="X.Org Foundation"
[ 45238.441] compiled for 1.9.0, module version = 1.0.0
[ 45238.441] Module class: X.Org Server Extension
[ 45238.441] ABI class: X.Org Server Extension, version 4.0
[ 45238.441] (II) Loading extension MIT-SCREEN-SAVER
[ 45238.441] (II) Loading extension XFree86-VidModeExtension
[ 45238.441] (II) Loading extension XFree86-DGA
[ 45238.441] (II) Loading extension DPMS
[ 45238.441] (II) Loading extension XVideo
[ 45238.441] (II) Loading extension XVideo-MotionCompensation
[ 45238.441] (II) Loading extension X-Resource
[ 45238.441] (II) LoadModule: "dbe"
[ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 45238.441] (II) Module dbe: vendor="X.Org Foundation"
[ 45238.441] compiled for 1.9.0, module version = 1.0.0
[ 45238.442] Module class: X.Org Server Extension
[ 45238.442] ABI class: X.Org Server Extension, version 4.0
[ 45238.442] (II) Loading extension DOUBLE-BUFFER
[ 45238.442] (II) LoadModule: "glx"
[ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45238.442] (II) Module glx: vendor="X.Org Foundation"
[ 45238.442] compiled for 1.9.0, module version = 1.0.0
[ 45238.442] ABI class: X.Org Server Extension, version 4.0
[ 45238.442] (==) AIGLX enabled
[ 45238.442] (II) Loading extension GLX
[ 45238.442] (II) LoadModule: "record"
[ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 45238.442] (II) Module record: vendor="X.Org Foundation"
[ 45238.442] compiled for 1.9.0, module version = 1.13.0
[ 45238.442] Module class: X.Org Server Extension
[ 45238.442] ABI class: X.Org Server Extension, version 4.0
[ 45238.442] (II) Loading extension RECORD
[ 45238.442] (II) LoadModule: "dri"
[ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 45238.443] (II) Module dri: vendor="X.Org Foundation"
[ 45238.443] compiled for 1.9.0, module version = 1.0.0
[ 45238.443] ABI class: X.Org Server Extension, version 4.0
[ 45238.443] (II) Loading extension XFree86-DRI
[ 45238.443] (II) LoadModule: "dri2"
[ 45238.443] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45238.443] (II) Module dri2: vendor="X.Org Foundation"
[ 45238.443] compiled for 1.9.0, module version = 1.2.0
[ 45238.443] ABI class: X.Org Server Extension, version 4.0
[ 45238.443] (II) Loading extension DRI2
[ 45238.443] (==) Matched intel as autoconfigured driver 0
[ 45238.443] (==) Matched vesa as autoconfigured driver 1
[ 45238.443] (==) Matched fbdev as autoconfigured driver 2
[ 45238.443] (==) Assigned the driver to the xf86ConfigLayout
[ 45238.443] (II) LoadModule: "intel"
[ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 45238.443] (II) Module intel: vendor="X.Org Foundation"
[ 45238.443] compiled for 1.9.0, module version = 2.12.0
[ 45238.443] Module class: X.Org Video Driver
[ 45238.443] ABI class: X.Org Video Driver, version 8.0
[ 45238.443] (II) LoadModule: "vesa"
[ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45238.444] (II) Module vesa: vendor="X.Org Foundation"
[ 45238.444] compiled for 1.9.0, module version = 2.3.0
[ 45238.444] Module class: X.Org Video Driver
[ 45238.444] ABI class: X.Org Video Driver, version 8.0
[ 45238.444] (II) LoadModule: "fbdev"
[ 45238.444] (WW) Warning, couldn't open module fbdev
[ 45238.444] (II) UnloadModule: "fbdev"
[ 45238.444] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45238.444] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 45238.444] (II) VESA: driver for VESA chipsets: vesa
[ 45238.444] (++) using VT number 7
[ 45238.448] (WW) Falling back to old probe method for vesa
[ 45238.450] drmOpenDevice: node name is /dev/dri/card0
[ 45238.450] drmOpenDevice: open result is 8, (OK)
[ 45238.450] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 45238.450] drmOpenDevice: node name is /dev/dri/card0
[ 45238.450] drmOpenDevice: open result is 8, (OK)
[ 45238.450] drmOpenByBusid: drmOpenMinor returns 8
[ 45238.450] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 45238.450] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45238.450] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45238.451] (==) intel(0): RGB weight 888
[ 45238.451] (==) intel(0): Default visual is TrueColor
[ 45238.451] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 45238.451] (--) intel(0): Chipset: "GM45"
[ 45238.451] (==) intel(0): video overlay key set to 0x101fe
[ 45238.472] (II) intel(0): Output VGA1 has no monitor section
[ 45238.578] (II) intel(0): Output LVDS1 has no monitor section
[ 45238.578] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 45238.581] (II) intel(0): Output DP1 has no monitor section
[ 45238.599] (II) intel(0): EDID for output VGA1
[ 45238.705] (II) intel(0): EDID for output LVDS1
[ 45238.705] (II) intel(0): Manufacturer: LGD Model: 1f6 Serial#: 0
[ 45238.705] (II) intel(0): Year: 2009 Week: 0
[ 45238.705] (II) intel(0): EDID Version: 1.3
[ 45238.705] (II) intel(0): Digital Display Input
[ 45238.705] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 45238.705] (II) intel(0): Gamma: 2.20
[ 45238.705] (II) intel(0): No DPMS capabilities specified
[ 45238.705] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 45238.705] (II) intel(0): First detailed timing is preferred mode
[ 45238.705] (II) intel(0): redX: 0.603 redY: 0.349 greenX: 0.325 greenY: 0.553
[ 45238.705] (II) intel(0): blueX: 0.157 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 45238.705] (II) intel(0): Manufacturer's mask: 0
[ 45238.705] (II) intel(0): Supported detailed timing:
[ 45238.705] (II) intel(0): clock: 71.0 MHz Image Size: 331 x 207 mm
[ 45238.705] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 45238.705] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 45238.705] (II) intel(0): LG Display
[ 45238.705] (II) intel(0): LP154WX4-TLB5
[ 45238.705] (II) intel(0): EDID (in hex):
[ 45238.706] (II) intel(0): 00ffffffffffff0030e4f60100000000
[ 45238.706] (II) intel(0): 00130103802115780a56759a59538d28
[ 45238.706] (II) intel(0): 24505400000001010101010101010101
[ 45238.706] (II) intel(0): 010101010101bc1b00a0502017303020
[ 45238.706] (II) intel(0): 36004bcf100000190000000000000000
[ 45238.706] (II) intel(0): 00000000000000000000000000fe004c
[ 45238.706] (II) intel(0): 4720446973706c61790a2020000000fe
[ 45238.706] (II) intel(0): 004c503135345758342d544c423500eb
[ 45238.706] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 45238.706] (II) intel(0): Printing probed modes for output LVDS1
[ 45238.706] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45238.706] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 45238.706] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 45238.706] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 45238.706] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 45238.707] (II) intel(0): EDID for output DP1
[ 45238.707] (II) intel(0): Output VGA1 disconnected
[ 45238.707] (II) intel(0): Output LVDS1 connected
[ 45238.707] (II) intel(0): Output DP1 disconnected
[ 45238.707] (II) intel(0): Using exact sizes for initial modes
[ 45238.707] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 45238.707] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 45238.707] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 45238.707] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 45238.707] (==) intel(0): DPI set to (96, 96)
[ 45238.707] (II) Loading sub module "fb"
[ 45238.707] (II) LoadModule: "fb"
[ 45238.707] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45238.707] (II) Module fb: vendor="X.Org Foundation"
[ 45238.707] compiled for 1.9.0, module version = 1.0.0
[ 45238.707] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45238.707] (II) UnloadModule: "vesa"
[ 45238.708] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45238.708] (==) Depth 24 pixmap format is 32 bpp
[ 45238.708] (II) intel(0): [DRI2] Setup complete
[ 45238.708] (II) intel(0): [DRI2] DRI driver: i965
[ 45238.708] (**) intel(0): Tiling enabled
[ 45238.708] (**) intel(0): SwapBuffers wait enabled
[ 45238.708] (==) intel(0): VideoRam: 262144 KB
[ 45238.708] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 45238.719] (II) UXA(0): Driver registered support for the following operations:
[ 45238.719] (II) solid
[ 45238.719] (II) copy
[ 45238.719] (II) composite (RENDER acceleration)
[ 45238.719] (II) put_image
[ 45238.719] (II) get_image
[ 45238.719] (==) intel(0): Backing store disabled
[ 45238.719] (==) intel(0): Silken mouse enabled
[ 45238.719] (II) intel(0): Initializing HW Cursor
[ 45238.745] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 45238.755] (==) intel(0): DPMS enabled
[ 45238.755] (==) intel(0): Intel XvMC decoder enabled
[ 45238.755] (II) intel(0): Set up textured video
[ 45238.755] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 45238.755] (II) intel(0): direct rendering: DRI2 Enabled
[ 45238.755] (--) RandR disabled
[ 45238.755] (II) Initializing built-in extension Generic Event Extension
[ 45238.755] (II) Initializing built-in extension SHAPE
[ 45238.755] (II) Initializing built-in extension MIT-SHM
[ 45238.755] (II) Initializing built-in extension XInputExtension
[ 45238.755] (II) Initializing built-in extension XTEST
[ 45238.755] (II) Initializing built-in extension BIG-REQUESTS
[ 45238.755] (II) Initializing built-in extension SYNC
[ 45238.755] (II) Initializing built-in extension XKEYBOARD
[ 45238.755] (II) Initializing built-in extension XC-MISC
[ 45238.755] (II) Initializing built-in extension SECURITY
[ 45238.755] (II) Initializing built-in extension XINERAMA
[ 45238.755] (II) Initializing built-in extension XFIXES
[ 45238.755] (II) Initializing built-in extension RENDER
[ 45238.755] (II) Initializing built-in extension RANDR
[ 45238.755] (II) Initializing built-in extension COMPOSITE
[ 45238.755] (II) Initializing built-in extension DAMAGE
[ 45238.767] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 45238.767] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 45238.767] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 45238.767] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 45238.767] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 45238.767] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 45238.767] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 45238.768] (II) intel(0): Setting screen physical size to 338 x 211
[ 45238.886] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 45238.886] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45238.886] (II) LoadModule: "evdev"
[ 45238.886] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45238.886] (II) Module evdev: vendor="X.Org Foundation"
[ 45238.886] compiled for 1.9.0, module version = 2.5.0
[ 45238.886] Module class: X.Org XInput Driver
[ 45238.886] ABI class: X.Org XInput driver, version 11.0
[ 45238.886] (**) Power Button: always reports core events
[ 45238.886] (**) Power Button: Device: "/dev/input/event2"
[ 45238.899] (--) Power Button: Found keys
[ 45238.899] (II) Power Button: Configuring as keyboard
[ 45238.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 45238.899] (**) Option "xkb_rules" "evdev"
[ 45238.899] (**) Option "xkb_model" "evdev"
[ 45238.899] (**) Option "xkb_layout" "us"
[ 45238.934] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 45238.934] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 45238.934] (**) Video Bus: always reports core events
[ 45238.934] (**) Video Bus: Device: "/dev/input/event4"
[ 45238.943] (--) Video Bus: Found keys
[ 45238.943] (II) Video Bus: Configuring as keyboard
[ 45238.943] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 45238.943] (**) Option "xkb_rules" "evdev"
[ 45238.943] (**) Option "xkb_model" "evdev"
[ 45238.943] (**) Option "xkb_layout" "us"
[ 45238.945] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 45238.945] (II) No input driver/identifier specified (ignoring)
[ 45238.946] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 45238.946] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 45238.946] (**) Sleep Button: always reports core events
[ 45238.946] (**) Sleep Button: Device: "/dev/input/event1"
[ 45238.953] (--) Sleep Button: Found keys
[ 45238.953] (II) Sleep Button: Configuring as keyboard
[ 45238.953] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 45238.953] (**) Option "xkb_rules" "evdev"
[ 45238.953] (**) Option "xkb_model" "evdev"
[ 45238.953] (**) Option "xkb_layout" "us"
[ 45238.956] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event7)
[ 45238.956] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
[ 45238.956] (**) Acer Crystal Eye webcam: always reports core events
[ 45238.956] (**) Acer Crystal Eye webcam: Device: "/dev/input/event7"
[ 45238.963] (--) Acer Crystal Eye webcam: Found keys
[ 45238.963] (II) Acer Crystal Eye webcam: Configuring as keyboard
[ 45238.963] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD)
[ 45238.963] (**) Option "xkb_rules" "evdev"
[ 45238.963] (**) Option "xkb_model" "evdev"
[ 45238.963] (**) Option "xkb_layout" "us"
[ 45238.963] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 45238.964] (II) No input driver/identifier specified (ignoring)
[ 45238.971] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 45238.971] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 45238.971] (**) AT Translated Set 2 keyboard: always reports core events
[ 45238.972] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 45238.979] (--) AT Translated Set 2 keyboard: Found keys
[ 45238.979] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 45238.979] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 45238.979] (**) Option "xkb_rules" "evdev"
[ 45238.979] (**) Option "xkb_model" "evdev"
[ 45238.979] (**) Option "xkb_layout" "us"
[ 45238.980] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
[ 45238.980] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 45238.980] (**) PS/2 Mouse: always reports core events
[ 45238.980] (**) PS/2 Mouse: Device: "/dev/input/event5"
[ 45238.993] (--) PS/2 Mouse: Found 3 mouse buttons
[ 45238.993] (--) PS/2 Mouse: Found relative axes
[ 45238.993] (--) PS/2 Mouse: Found x and y relative axes
[ 45238.993] (II) PS/2 Mouse: Configuring as mouse
[ 45238.993] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 45238.993] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45238.993] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 45238.993] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 45238.993] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 45238.993] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 45238.993] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 45238.993] (II) PS/2 Mouse: initialized for relative axes.
[ 45238.993] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 45238.993] (II) No input driver/identifier specified (ignoring)
[ 45238.994] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 45238.994] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 45238.994] (II) LoadModule: "synaptics"
[ 45238.994] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 45238.994] (II) Module synaptics: vendor="X.Org Foundation"
[ 45238.994] compiled for 1.9.0, module version = 1.3.0
[ 45238.994] Module class: X.Org XInput Driver
[ 45238.994] ABI class: X.Org XInput driver, version 11.0
[ 45238.994] (II) Synaptics touchpad driver version 1.3.0
[ 45238.995] (**) Option "Device" "/dev/input/event6"
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 45239.033] (**) Option "EmulateTwoFingerMinZ" "40"
[ 45239.033] (**) Option "EmulateTwoFingerMinW" "5"
[ 45239.033] (**) Option "VertEdgeScroll" "on"
[ 45239.033] (**) Option "CornerCoasting" "1"
[ 45239.033] (**) Option "VertTwoFingerScroll" "on"
[ 45239.033] (**) Option "RBCornerButton" "3"
[ 45239.033] (**) Option "LTCornerButton" "2"
[ 45239.033] (**) Option "TapButton1" "1"
[ 45239.033] (**) Option "TapButton2" "2"
[ 45239.033] (**) Option "TapButton3" "3"
[ 45239.033] (**) Option "CoastingSpeed" "0.5"
[ 45239.033] (**) Option "CoastingFriction" "0"
[ 45239.059] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 45239.059] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 45239.073] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 45239.099] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 45239.100] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 45239.100] (II) No input driver/identifier specified (ignoring)
[ 45242.575] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45242.575] (II) intel(0): Printing DDC gathered Modelines:
[ 45242.575] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45243.125] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45243.125] (II) intel(0): Printing DDC gathered Modelines:
[ 45243.125] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45245.428] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45245.428] (II) intel(0): Printing DDC gathered Modelines:
[ 45245.428] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 45248.639] (II) intel(0): EDID vendor "LGD", prod id 502
[ 45248.639] (II) intel(0): Printing DDC gathered Modelines:
[ 45248.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70602.586] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70602.586] (II) intel(0): Printing DDC gathered Modelines:
[ 70602.586] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70602.803] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70602.803] (II) intel(0): Printing DDC gathered Modelines:
[ 70602.803] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.146] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.146] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.146] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.358] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.358] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.359] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.518] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.518] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.518] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 70603.662] (II) intel(0): EDID vendor "LGD", prod id 502
[ 70603.662] (II) intel(0): Printing DDC gathered Modelines:
[ 70603.662] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 90776.420] (II) intel(0): EDID vendor "LGD", prod id 502
[ 90776.420] (II) intel(0): Printing DDC gathered Modelines:
[ 90776.420] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122487.594] (II) intel(0): EDID vendor "LGD", prod id 502
[122487.594] (II) intel(0): Printing DDC gathered Modelines:
[122487.594] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122488.139] (II) intel(0): EDID vendor "LGD", prod id 502
[122488.139] (II) intel(0): Printing DDC gathered Modelines:
[122488.139] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122488.784] (II) intel(0): EDID vendor "LGD", prod id 502
[122488.784] (II) intel(0): Printing DDC gathered Modelines:
[122488.784] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122488.980] (II) intel(0): EDID vendor "LGD", prod id 502
[122488.980] (II) intel(0): Printing DDC gathered Modelines:
[122488.980] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.174] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.174] (II) intel(0): Printing DDC gathered Modelines:
[122489.174] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.321] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.321] (II) intel(0): Printing DDC gathered Modelines:
[122489.321] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.470] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.470] (II) intel(0): Printing DDC gathered Modelines:
[122489.470] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.617] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.617] (II) intel(0): Printing DDC gathered Modelines:
[122489.617] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.756] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.756] (II) intel(0): Printing DDC gathered Modelines:
[122489.756] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122489.903] (II) intel(0): EDID vendor "LGD", prod id 502
[122489.904] (II) intel(0): Printing DDC gathered Modelines:
[122489.904] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[122490.054] (II) intel(0): EDID vendor "LGD", prod id 502
[122490.054] (II) intel(0): Printing DDC gathered Modelines:
[122490.054] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165444.489] (II) intel(0): EDID vendor "LGD", prod id 502
[165444.519] (II) intel(0): Printing DDC gathered Modelines:
[165444.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.260] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.260] (II) intel(0): Printing DDC gathered Modelines:
[165445.261] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.519] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.519] (II) intel(0): Printing DDC gathered Modelines:
[165445.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.682] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.682] (II) intel(0): Printing DDC gathered Modelines:
[165445.682] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165445.827] (II) intel(0): EDID vendor "LGD", prod id 502
[165445.827] (II) intel(0): Printing DDC gathered Modelines:
[165445.827] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.027] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.027] (II) intel(0): Printing DDC gathered Modelines:
[165446.027] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.234] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.234] (II) intel(0): Printing DDC gathered Modelines:
[165446.234] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.409] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.409] (II) intel(0): Printing DDC gathered Modelines:
[165446.409] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.638] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.639] (II) intel(0): Printing DDC gathered Modelines:
[165446.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165446.798] (II) intel(0): EDID vendor "LGD", prod id 502
[165446.798] (II) intel(0): Printing DDC gathered Modelines:
[165446.798] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165447.035] (II) intel(0): EDID vendor "LGD", prod id 502
[165447.035] (II) intel(0): Printing DDC gathered Modelines:
[165447.035] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165447.227] (II) intel(0): EDID vendor "LGD", prod id 502
[165447.227] (II) intel(0): Printing DDC gathered Modelines:
[165447.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[165450.227] (II) intel(0): EDID vendor "LGD", prod id 502
[165450.227] (II) intel(0): Printing DDC gathered Modelines:
[165450.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[edit] I haven't had any problems the since I disabled all the extra stuff. I don't feel like finding the exact cause since I think it was specific to my own setup... though I suspect syndaemon. I'll go ahead and mark this as solved... again. Thanks for the help.
Last edited by drsjlazar (2010-10-13 14:44:37)

Synaptics: scrolling stopped working after update

After I updated:
[2008-05-03 18:00] synchronizing package lists
[2008-05-03 18:00] starting full system upgrade
[2008-05-03 18:07] upgraded autoconf (2.61-3 -> 2.62-1)
[2008-05-03 18:07] upgraded cairomm (1.4.8-1 -> 1.6.0-1)
[2008-05-03 18:07] installed hunspell (1.2.2-2)
[2008-05-03 18:07] installed hspell (1.0-2)
[2008-05-03 18:07] upgraded enchant (1.3.0-1 -> 1.4.1-1)
[2008-05-03 18:07] upgraded fltk (1.1.8-1 -> 1.1.9-1)
[2008-05-03 18:07] upgraded gail (1.22.0-1 -> 1.22.1-1)
[2008-05-03 18:07] upgraded glibmm (2.16.1-1 -> 2.16.2-1)
[2008-05-03 18:07] upgraded gtkmm (2.12.6-1 -> 2.12.7-1)
[2008-05-03 18:07] upgraded imagemagick (6.3.8.0-2 -> 6.4.1.0-1)
[2008-05-03 18:07] upgraded libxml2 (2.6.31-1 -> 2.6.32-1)
[2008-05-03 18:07] upgraded libxslt (1.1.22-1 -> 1.1.23-1)
[2008-05-03 18:07] upgraded poppler (0.8.0-1 -> 0.8.2-1)
[2008-05-03 18:07] upgraded poppler-glib (0.8.0-1 -> 0.8.2-1)
[2008-05-03 18:07] update desktop mime database ...
[2008-05-03 18:07] upgraded inkscape (0.46-1 -> 0.46-4)
[2008-05-03 18:07] upgraded kdelibs (3.5.9-2 -> 3.5.9-3.1)
[2008-05-03 18:07] upgraded kdeutils (3.5.9-1 -> 3.5.9-2)
[2008-05-03 18:07] warning: /etc/laptop-mode/conf.d/wireless-ipw-power.conf installed as /etc/laptop-mode/conf.d/wireless-ipw-power.conf.pacnew
[2008-05-03 18:07] warning: /etc/laptop-mode/conf.d/ac97-powersave.conf installed as /etc/laptop-mode/conf.d/ac97-powersave.conf.pacnew
[2008-05-03 18:07] upgraded laptop-mode-tools (1.35-2 -> 1.41-1)
[2008-05-03 18:07] upgraded poppler-qt3 (0.8.0-1 -> 0.8.2-1)
[2008-05-03 18:07] upgraded pycairo (1.4.0-3 -> 1.4.12-1)
[2008-05-03 18:07] upgraded tar (1.19-2 -> 1.20-2)
[2008-05-03 18:07] upgraded wget (1.11-1 -> 1.11.1-1)
I just discovered scrolling doesn't work anymore. I saw some other posts with synaptics problems, what could cause it? I take the problem lays in one of the updated packages, not in my configuration since that didn't change.

I fiddled with the configs, added vertedgescroll "on" to xorg.conf touchpad device section (duh! ), and it's working again, don't know what happened.

Mouse Scrolling stopped working after OS Maverick update, really disappointed

After I updated my mac to Os Maverick the scrolling function of my mouse just disappeared and it is not even in the system preferences. Frustrated, please help.

USB or wireless mouse?
Try running the combo update.
10.9.4 Combo Update

Acrobat XI Stopped working after CC Updates

RANT: It's happened 3 times now, and I'm getting fed up of the Adobe support - very disappointing. I don't think they know how to handle issues, and sometimes wonder if they even know the basic difference between hold and disconnect. Numerous times I have contacted them, after chatting with them for a few minutes, they say that they have to trasnfer me to the technical support, and then I get disconnected. Then the next guy has to start all over again with the same questions. Horrible.
Ok, rant is over (for now), hopefully this forum is more helpful.
ISSUE: last few (3) times I have noticed that when I update my Creatve Cloud panel, my Acrobat stops working. I'm not entirely sure if this is related to the CC panel update, but that's what it seems to me right now. So, after numerous chats with the Adobe chats, and my own office IT, I (myself) figured out that the issue could've been because I see 2 Adobe Acrobats installed on my system. The screen cap below shows what I mean.
Last 2 times I uninstalled both, and reinstalled the Acrobat from the CC panel again, and it worked. But this time it just dind't. And I've been totally unable to solve the issue with my IT and Adobe's support so far.
So, what happens is that when I launch Acrobat, it asks for licensing information again, or it says it would launch as a trail version... Come on, I'm already paying for the whole package.
Desparely hoping that the Adobe Forum Community is more capable for such support...

I've had numerous chats with Adobe support agents, and with my own IT, and haven't had luck yet. It's been a terrible experience stuck between the two IT support departments as a user I'm the one who's suffering and not these support guys...
The issue here is that my Acrobat is not working as it can't find the internet connection, even though all the other Adobe products in the Creative Cloud work fine.
We use Proxy scrypts in my office, and even though all Adobe links provided to me by Adobe, have been white-listed by my IT, Acrobat still hasn't worked.
I've tried it all, installing, uninstalling, Adobe clean-ups, registery edits, preferential boots etc etc. Still no solution.
Is there no way to manually enter a serial number to get it working???? What if someone loses internet connection, does it mean the Adobe Creative Cloud products are useless in that scenario, even though one has paid for months...
Damn, I'm angry with myself for pushing for Adobe CC upgrade. Sigh.

Screen sharing stopped working after last update

Hello all,
I have run software update yesterday, and there were about 10 downloads (I run this weekely, so these must have been new ones). The thing is that after installing all the updates, one of the features that I use more frequently, screen sharing, stopped working properly. I have a Mac Book Pro and an I Mac, both running on Snow Leopard, and screen sharing has always worked just fine, but not after the latest update.
I checked passwords and they are all right, and also checked sharing properties and all seems to be fine. I can share files all right, but for screen sharing now is only possible by setting the option "anyone may request permission to control screen" (under sharing>screen sharing>computer settings) to on, and ask for authorization each time I need to share screens, not good, mainly if you have the computers in different rooms.
Finally, I own an Me account, so I tried sharing screen via Back to my Mac, but it didn't work either.
Can anyone help?
Thanks a lot,
Luis

Problem solved!
After working with Apple, I have an answer. It looks like the 10.10.2 update changed your firewall settings. Try this:
System Preferences>Security and Privacy>Firewall Options
Scroll down the list till you find "screensharingd". If it's marked as block in coming connections, change it to allow incoming connections.
Be sure to reboot your computer and you should be good to go!

Satellite A105 Shift Keys stop working after BIOS update

I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

Hi, thank you for your help.
Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
Thank you for your reply. (-:

Media Key stop working after firmware update on 55...

The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009

"The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009"
Did you update using NSU? I have updated mine recently and I have v11.0.054 with custom version 11.0.054.C02.01, language set:22.. and my media key is still working. Am I missing some updates? Nokia Software Update checker says theres is no update yet.
Message Edited by RhomANZ2 on 30-Oct-2009 03:53 AM
Nokia 5530 Xpress Music
v11.0.054
"How We Respond Is Who We Are..."

Scrolling stopped working after Xorg update, already disabled hotplug

Similar Messages

Maybe you are looking for