Scrolling Synaptic Touchpad Problem (Arch Wiki didn't solve it)

Good to the whole Arch's community.
First of all to appear, I am codebuster and am new in this community and in this magnificent distro that I have been charmed with for his simplicity and performance. Always I had begun for behind the topic of the configuration of Arch's installation, but consulting his magnificent tips and coming to the official information it me has been possible. I have everything working of correct form except the function of scroll of my touchpad Synaptic (function that I use always and that really I throw enough in lack). I have followed the steps indicated so much in the Wiki (http://wiki.archlinux.org/index.php/Touchpad_Synaptics) as in numerous forums of linux in inet but I have not managed to make it work, for what I resort to you to seeing if someone can throw something of light.
Let's begin.
PC: Acer Aspire 5610
Distribution: ArchLinux updated a today.
Desktop: XFCE
Graphics: NVIDIA Geforce GO 7300 (proprietary Drivers: NVIDIA Driver Version:256.35)
Driver: xf86-input-synaptics-1.2.2-2
hardinfo
Name PS/2 Synaptics TouchPad
Type Mouse
Bus 0x11
Vendor 2
Product 0x1
Version 0x0
Connected to isa0060/serio/input0
cat /proc/bus/input/devices
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input5
U: Uniq=
H: Handlers=mouse0 event5
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dri2"
Load "dbe"
Load "record"
Load "glx"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse0"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G72M [Quadro NVS 110M/GeForce Go 7300]"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg.0.log
[ 18.827]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 18.828]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 18.828] X Protocol Version 11, Revision 0
[ 18.828] Build Operating System: Linux 2.6.34-ARCH i686
[ 18.828] Current Operating System: Linux arch-live 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686
[ 18.828] Kernel command line: root=/dev/disk/by-uuid/2cf26781-3ca3-4654-8b83-37ea60864aab ro
[ 18.828] Build Date: 21 June 2010 11:54:27AM
[ 18.828]
[ 18.829] Current version of pixman: 0.18.2
[ 18.830] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.830] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.830] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 26 15:21:50 2010
[ 18.909] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.909] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.962] (==) ServerLayout "X.org Configured"
[ 18.962] (**) |-->Screen "Screen0" (0)
[ 18.962] (**) | |-->Monitor "Monitor0"
[ 18.963] (**) | |-->Device "Card0"
[ 18.963] (**) |-->Input Device "Mouse0"
[ 18.963] (**) |-->Input Device "Keyboard0"
[ 18.963] (==) Automatically adding devices
[ 18.963] (==) Automatically enabling devices
[ 19.052] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.052] Entry deleted from font path.
[ 19.063] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.063] Entry deleted from font path.
[ 19.063] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.064] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.064] Entry deleted from font path.
[ 19.064] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.064] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.064] Entry deleted from font path.
[ 19.064] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.064] Entry deleted from font path.
[ 19.064] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.064] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.064] Entry deleted from font path.
[ 19.064] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.064] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 19.064] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 19.064] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 19.064] (WW) Disabling Mouse0
[ 19.064] (WW) Disabling Keyboard0
[ 19.064] (II) Loader magic: 0x81e9d00
[ 19.064] (II) Module ABI versions:
[ 19.064] X.Org ANSI C Emulation: 0.4
[ 19.064] X.Org Video Driver: 7.0
[ 19.064] X.Org XInput driver : 9.0
[ 19.064] X.Org Server Extension : 3.0
[ 19.088] (--) PCI:*(0:1:0:0) 10de:01d7:1025:0090 nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd0000000/16777216
[ 19.088] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.088] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "dri" will be loaded by default.
[ 19.088] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) LoadModule: "dri2"
[ 19.141] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19.175] (II) Module dri2: vendor="X.Org Foundation"
[ 19.175] compiled for 1.8.1.902, module version = 1.2.0
[ 19.175] ABI class: X.Org Server Extension, version 3.0
[ 19.176] (II) Loading extension DRI2
[ 19.176] (II) LoadModule: "dbe"
[ 19.176] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.187] (II) Module dbe: vendor="X.Org Foundation"
[ 19.187] compiled for 1.8.1.902, module version = 1.0.0
[ 19.187] Module class: X.Org Server Extension
[ 19.187] ABI class: X.Org Server Extension, version 3.0
[ 19.187] (II) Loading extension DOUBLE-BUFFER
[ 19.187] (II) LoadModule: "record"
[ 19.187] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.188] (II) Module record: vendor="X.Org Foundation"
[ 19.188] compiled for 1.8.1.902, module version = 1.13.0
[ 19.188] Module class: X.Org Server Extension
[ 19.188] ABI class: X.Org Server Extension, version 3.0
[ 19.188] (II) Loading extension RECORD
[ 19.188] (II) LoadModule: "glx"
[ 19.189] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.431] (II) Module glx: vendor="NVIDIA Corporation"
[ 20.431] compiled for 4.0.2, module version = 1.0.0
[ 20.431] Module class: X.Org Server Extension
[ 20.431] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:21:24 PDT 2010
[ 20.431] (II) Loading extension GLX
[ 20.431] (II) LoadModule: "extmod"
[ 20.432] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.441] (II) Module extmod: vendor="X.Org Foundation"
[ 20.441] compiled for 1.8.1.902, module version = 1.0.0
[ 20.441] Module class: X.Org Server Extension
[ 20.441] ABI class: X.Org Server Extension, version 3.0
[ 20.441] (II) Loading extension MIT-SCREEN-SAVER
[ 20.441] (II) Loading extension XFree86-VidModeExtension
[ 20.441] (II) Loading extension XFree86-DGA
[ 20.441] (II) Loading extension DPMS
[ 20.441] (II) Loading extension XVideo
[ 20.441] (II) Loading extension XVideo-MotionCompensation
[ 20.441] (II) Loading extension X-Resource
[ 20.441] (II) LoadModule: "dri"
[ 20.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.451] (II) Module dri: vendor="X.Org Foundation"
[ 20.451] compiled for 1.8.1.902, module version = 1.0.0
[ 20.451] ABI class: X.Org Server Extension, version 3.0
[ 20.451] (II) Loading extension XFree86-DRI
[ 20.451] (II) LoadModule: "nvidia"
[ 20.452] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 20.560] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20.560] compiled for 4.0.2, module version = 1.0.0
[ 20.560] Module class: X.Org Video Driver
[ 20.620] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:59:34 PDT 2010
[ 20.625] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 20.625] (++) using VT number 7
[ 20.629] (II) Primary Device is: PCI 01@00:00:0
[ 20.645] (II) Loading sub module "fb"
[ 20.646] (II) LoadModule: "fb"
[ 20.654] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.675] (II) Module fb: vendor="X.Org Foundation"
[ 20.675] compiled for 1.8.1.902, module version = 1.0.0
[ 20.675] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.675] (II) Loading sub module "wfb"
[ 20.675] (II) LoadModule: "wfb"
[ 20.676] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 20.694] (II) Module wfb: vendor="X.Org Foundation"
[ 20.694] compiled for 1.8.1.902, module version = 1.0.0
[ 20.694] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.694] (II) Loading sub module "ramdac"
[ 20.694] (II) LoadModule: "ramdac"
[ 20.694] (II) Module "ramdac" already built-in
[ 20.744] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 20.744] (==) NVIDIA(0): RGB weight 888
[ 20.744] (==) NVIDIA(0): Default visual is TrueColor
[ 20.744] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.744] (**) NVIDIA(0): Enabling RENDER acceleration
[ 20.744] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 20.744] (II) NVIDIA(0): enabled.
[ 22.341] (II) NVIDIA(0): NVIDIA GPU GeForce Go 7300 (G72) at PCI:1:0:0 (GPU-0)
[ 22.341] (--) NVIDIA(0): Memory: 262144 kBytes
[ 22.341] (--) NVIDIA(0): VideoBIOS: 05.72.22.58.30
[ 22.341] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 22.341] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 22.341] (--) NVIDIA(0): Connected display device(s) on GeForce Go 7300 at PCI:1:0:0:
[ 22.341] (--) NVIDIA(0): LPL (DFP-0)
[ 22.341] (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
[ 22.341] (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
[ 22.355] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 22.355] (==) NVIDIA(0):
[ 22.355] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 22.355] (==) NVIDIA(0): will be used as the requested mode.
[ 22.355] (==) NVIDIA(0):
[ 22.355] (II) NVIDIA(0): Validated modes:
[ 22.355] (II) NVIDIA(0): "nvidia-auto-select"
[ 22.356] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[ 22.356] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[ 22.356] (--) NVIDIA(0): option
[ 22.356] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 22.356] (--) Depth 24 pixmap format is 32 bpp
[ 22.358] (II) NVIDIA(0): Initialized GPU GART.
[ 22.371] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 22.371] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 22.371] (WW) NVIDIA(0): ACPI: Error: Unable to find the brightness file path under
[ 22.372] (WW) NVIDIA(0): /proc/acpi/video. The NVIDIA X driver will not be able to
[ 22.372] (WW) NVIDIA(0): respond to ACPI brightness change hotkey events.
[ 22.372] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 23.783] (II) Loading extension NV-GLX
[ 23.817] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 23.831] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23.831] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 23.851] (==) NVIDIA(0): Backing store disabled
[ 23.851] (==) NVIDIA(0): Silken mouse enabled
[ 23.858] (==) NVIDIA(0): DPMS enabled
[ 23.858] (II) Loading extension NV-CONTROL
[ 23.859] (II) Loading extension XINERAMA
[ 23.859] (II) Loading sub module "dri2"
[ 23.859] (II) LoadModule: "dri2"
[ 23.860] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.860] (II) NVIDIA(0): [DRI2] Setup complete
[ 23.860] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 23.860] (==) RandR enabled
[ 23.860] (II) Initializing built-in extension Generic Event Extension
[ 23.860] (II) Initializing built-in extension SHAPE
[ 23.860] (II) Initializing built-in extension MIT-SHM
[ 23.860] (II) Initializing built-in extension XInputExtension
[ 23.860] (II) Initializing built-in extension XTEST
[ 23.860] (II) Initializing built-in extension BIG-REQUESTS
[ 23.860] (II) Initializing built-in extension SYNC
[ 23.860] (II) Initializing built-in extension XKEYBOARD
[ 23.860] (II) Initializing built-in extension XC-MISC
[ 23.860] (II) Initializing built-in extension SECURITY
[ 23.860] (II) Initializing built-in extension XINERAMA
[ 23.860] (II) Initializing built-in extension XFIXES
[ 23.860] (II) Initializing built-in extension RENDER
[ 23.860] (II) Initializing built-in extension RANDR
[ 23.860] (II) Initializing built-in extension COMPOSITE
[ 23.860] (II) Initializing built-in extension DAMAGE
[ 23.864] (II) Initializing extension GLX
[ 24.465] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 24.465] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.465] (II) LoadModule: "evdev"
[ 24.466] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.483] (II) Module evdev: vendor="X.Org Foundation"
[ 24.483] compiled for 1.8.0, module version = 2.4.0
[ 24.483] Module class: X.Org XInput Driver
[ 24.483] ABI class: X.Org XInput driver, version 9.0
[ 24.483] (**) Power Button: always reports core events
[ 24.483] (**) Power Button: Device: "/dev/input/event4"
[ 24.491] (II) Power Button: Found keys
[ 24.491] (II) Power Button: Configuring as keyboard
[ 24.491] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.491] (**) Option "xkb_rules" "evdev"
[ 24.491] (**) Option "xkb_model" "evdev"
[ 24.491] (**) Option "xkb_layout" "us"
[ 24.579] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 24.580] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.580] (**) Video Bus: always reports core events
[ 24.580] (**) Video Bus: Device: "/dev/input/event5"
[ 24.587] (II) Video Bus: Found keys
[ 24.587] (II) Video Bus: Configuring as keyboard
[ 24.587] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 24.587] (**) Option "xkb_rules" "evdev"
[ 24.587] (**) Option "xkb_model" "evdev"
[ 24.587] (**) Option "xkb_layout" "us"
[ 24.593] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 24.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.594] (**) Power Button: always reports core events
[ 24.594] (**) Power Button: Device: "/dev/input/event3"
[ 24.600] (II) Power Button: Found keys
[ 24.600] (II) Power Button: Configuring as keyboard
[ 24.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.600] (**) Option "xkb_rules" "evdev"
[ 24.601] (**) Option "xkb_model" "evdev"
[ 24.601] (**) Option "xkb_layout" "us"
[ 24.602] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.602] (II) No input driver/identifier specified (ignoring)
[ 24.602] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 24.602] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.602] (**) Sleep Button: always reports core events
[ 24.602] (**) Sleep Button: Device: "/dev/input/event2"
[ 24.611] (II) Sleep Button: Found keys
[ 24.611] (II) Sleep Button: Configuring as keyboard
[ 24.611] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 24.611] (**) Option "xkb_rules" "evdev"
[ 24.611] (**) Option "xkb_model" "evdev"
[ 24.611] (**) Option "xkb_layout" "us"
[ 24.613] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 24.613] (II) No input driver/identifier specified (ignoring)
[ 24.619] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event7)
[ 24.619] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 24.619] (**) MosArt Optical Mouse: always reports core events
[ 24.619] (**) MosArt Optical Mouse: Device: "/dev/input/event7"
[ 24.631] (II) MosArt Optical Mouse: Found 3 mouse buttons
[ 24.631] (II) MosArt Optical Mouse: Found scroll wheel(s)
[ 24.631] (II) MosArt Optical Mouse: Found relative axes
[ 24.631] (II) MosArt Optical Mouse: Found x and y relative axes
[ 24.631] (II) MosArt Optical Mouse: Configuring as mouse
[ 24.631] (**) MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[ 24.631] (**) MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.631] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE)
[ 24.631] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[ 24.631] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[ 24.631] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[ 24.631] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[ 24.631] (II) MosArt Optical Mouse: initialized for relative axes.
[ 24.632] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse1)
[ 24.632] (II) No input driver/identifier specified (ignoring)
[ 24.638] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.638] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.638] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.638] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.651] (II) AT Translated Set 2 keyboard: Found keys
[ 24.651] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.651] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 24.651] (**) Option "xkb_rules" "evdev"
[ 24.651] (**) Option "xkb_model" "evdev"
[ 24.651] (**) Option "xkb_layout" "us"
[ 24.652] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/event6)
[ 24.652] (**) PS/2 Synaptics TouchPad: Applying InputClass "evdev pointer catchall"
[ 24.652] (**) PS/2 Synaptics TouchPad: always reports core events
[ 24.652] (**) PS/2 Synaptics TouchPad: Device: "/dev/input/event6"
[ 24.664] (II) PS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 24.664] (II) PS/2 Synaptics TouchPad: Found relative axes
[ 24.664] (II) PS/2 Synaptics TouchPad: Found x and y relative axes
[ 24.664] (II) PS/2 Synaptics TouchPad: Configuring as mouse
[ 24.664] (**) PS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 24.664] (**) PS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.664] (II) XINPUT: Adding extended input device "PS/2 Synaptics TouchPad" (type: MOUSE)
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.664] (II) PS/2 Synaptics TouchPad: initialized for relative axes.
[ 24.665] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 24.665] (II) No input driver/identifier specified (ignoring)
10-evdev.conf
# Catchall classes for input devices
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "VertEdgeScroll" "true"
Option "VertScrollDelta" "100"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "true"
Option "VertScrollDelta" "100"
EndSection
Good, I believe that this is quite, if you need more information tell to me and it will make it come near.
Excuse me for my poor english,Thanks in advance and best regards.
codebuster.
Last edited by codebuster (2010-07-26 14:44:07)

kgas wrote:
there is no need to include the synaptics option. here is mine and works fine (Acer Aspire 5738G)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G98M [GeForce G 105M]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
¡¡¡¡ Thanks a lot for the info !!! 
I remove all the Synaptics entries in the xorg.conf and worked fine with the /dev/input/mice option (in the Arch Wiki was # commented, the device, was /dev/psaux, and my mouse in hardinfo was recognized as PS/2 Synaptic for that I thought that it was the correct  option ).
Only one question, now I have set the scrolling mode with two fingers, ¿do you know how to activate one finger scrolling? I tried with these options in Mouse section but doesn't work for me:
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "false" # enable horizontal scroll zone
Option "VertTwoFingerScroll" "false" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "false" # horizontal scroll anywhere with two fingers
¡ Many, many thanks and my best regards !
codebuster.
Last edited by codebuster (2010-07-26 08:26:55)

Similar Messages

  • [SOLVED] Synaptics touchpad problem eeepc 1000HE

    I installed Arch on my eeepc 1000HE yesterday and configured / used it happily for most of the day - but then it developed a touchpad problem which I'm struggling to fix.
    If you lift your finger from the touchpad the mouse cursors 'forgets' / 'resets' its position.
    eg When you put your finger back on the touchpad the cursor jumps to a different position. For one thing, this means you can't tap to click, because when you lift your finger to tap, the cursor jumps somewhere else (usually a slight move, but usually away from the item one wants to click).
    Also, when needing a few swipes (eg to move the cursor left to right across the screen), the cursor jumps away from its current position (to the left - sort of back to its original starting position) each time I lift my finger to make the extra swipe.
    The problem seems to have started when I had a tv plugged in via the vga and was managing screen switching with xrandr and the screen-switch function key (I'm trying to set up the eeepc as a mythtv frontend) but this could be coincidence.
    Some settings etc -
    Relevant parts of /var/log/Xorg.0.log seem to be -
    [    19.547] (**) Asus EeePC extra buttons: Applying InputClass "touchpad"
    [    19.547] (II) LoadModule: "synaptics"
    [    19.548] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [    19.561] (II) Module synaptics: vendor="X.Org Foundation"
    [    19.561]     compiled for 1.10.0, module version = 1.4.0
    [    19.561]     Module class: X.Org XInput Driver
    [    19.561]     ABI class: X.Org XInput driver, version 12.2
    [    19.561] (II) Using input driver 'synaptics' for 'Asus EeePC extra buttons'
    [    19.561] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [    19.561] (**) Asus EeePC extra buttons: always reports core events
    [    19.561] (**) Option "Device" "/dev/input/event8"
    [    19.713] (--) Asus EeePC extra buttons: invalid x-axis range.  defaulting to 1615 - 5685
    [    19.713] (--) Asus EeePC extra buttons: invalid y-axis range.  defaulting to 1729 - 4171
    [    19.713] (--) Asus EeePC extra buttons: invalid pressure range.  defaulting to 0 - 256
    [    19.713] (--) Asus EeePC extra buttons: invalid finger width range.  defaulting to 0 - 16
    [    19.714] (**) Option "EmulateTwoFingerMinZ" "0"
    [    19.714] (**) Option "VertEdgeScroll" "on"
    [    19.714] (**) Option "HorizEdgeScroll" "on"
    [    19.714] (**) Option "VertTwoFingerScroll" "on"
    [    19.714] (**) Option "HorizTwoFingerScroll" "on"
    [    19.714] (**) Option "TapButton1" "1"
    [    19.714] (**) Option "TapButton2" "2"
    [    19.714] (**) Option "TapButton3" "3"
    [    19.714] (**) Option "CircularScrolling" "on"
    [    19.714] (**) Option "CircScrollTrigger" "2"
    [    19.820] (--) Asus EeePC extra buttons: no supported touchpad found
    [    19.820] (EE) Asus EeePC extra buttons Unable to query/initialize Synaptics hardware.
    [    19.886] (EE) PreInit returned 11 for "Asus EeePC extra buttons"
    [    19.887] (II) UnloadModule: "synaptics"
    [    19.887] (II) Unloading synaptics
    and
    [    19.964] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
    [    19.964] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev keyboard catchall"
    [    19.964] (II) Using input driver 'evdev' for 'ETPS/2 Elantech Touchpad'
    [    19.964] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.965] (**) ETPS/2 Elantech Touchpad: always reports core events
    [    19.965] (**) ETPS/2 Elantech Touchpad: Device: "/dev/input/event7"
    [    19.980] (--) ETPS/2 Elantech Touchpad: Found 3 mouse buttons
    [    19.980] (--) ETPS/2 Elantech Touchpad: Found absolute axes
    [    19.980] (--) ETPS/2 Elantech Touchpad: Found x and y absolute axes
    [    19.980] (--) ETPS/2 Elantech Touchpad: Found absolute touchpad.
    [    19.980] (II) ETPS/2 Elantech Touchpad: Configuring as touchpad
    [    19.980] (**) ETPS/2 Elantech Touchpad: YAxisMapping: buttons 4 and 5
    [    19.980] (**) ETPS/2 Elantech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    19.980] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
    [    19.980] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
    [    19.981] (II) ETPS/2 Elantech Touchpad: initialized for absolute axes.
    [    19.981] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [    19.981] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
    [    19.981] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [    19.981] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [    19.992] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [    19.992] (II) No input driver/identifier specified (ignoring)
    I have commented out the touchpad section in /etc/X11/xorg.conf.d/10-evdev.conf  (un-commenting made no difference) -
    #Section "InputClass"
    #        Identifier "evdev touchpad catchall"
    #        MatchIsTouchpad "on"
    #        MatchDevicePath "/dev/input/event*"
    #        Driver "evdev"
    #EndSection
    /etc/X11/xorg.conf.d/10-synaptics.conf looks like this -
    Section "InputClass"
          Identifier "touchpad"
          Driver "synaptics"
          MatchIsTouchpad "on"
                 Option "TapButton1" "1"
                 Option "TapButton2" "2"
                 Option "TapButton3" "3"
                 Option "VertEdgeScroll" "on"
                 Option "VertTwoFingerScroll" "on"
                 Option "HorizEdgeScroll" "on"
                 Option "HorizTwoFingerScroll" "on"
                 Option "CircularScrolling" "on"
                 Option "CircScrollTrigger" "2"
                 Option "EmulateTwoFingerMinZ" "0"
    EndSection
    I thought the issue might be related to this https://bugs.archlinux.org/task/20830 , but adding MatchDevicePath "/dev/input/event*" to /etc/X11/xorg.conf.d/10-synaptics.conf didn't make a difference.
    My Daemons array looks like this -
    DAEMONS=(syslog-ng dbus !network wicd netfs crond lircd samba alsa !hal sshd gdm)
    Removing the ! before hal made no difference.
    I am using gnome. Changing the settings in  the /desktop/gnome/peripherals/touchpad/ folder with gconf-editor makes no difference to the problem.
    I am using kernel 2.6.38-ARCH. Using the fallback kernel didn't help.
    Any help would be much appreciated.
    Thanks
    Last edited by belbo (2011-04-26 12:58:17)

    Update. After some more searching the forum I thought downgrading udev may help. Since I had a fresh install I needed to install the AUR downgrade package. I did a yaourt -Suy before doing so which, amongst other things, installed a new kernel (4-1) and upgraded yajl. When I tried yaourt -S downgrade I got an error re yajl - error while loading shared libraries libyajl.so.1, canot open shared object file, no such file or directory, and then "error: target not found: dowgrade".
    Any help really appreciated.

  • Synaptic Touchpad drivers

    For some time now my mouse hadnt been working so I was using an external mouse which worked correctly, but I gave the mouse out and I am trying to restore my touchpad on my computer so I went to the mouse property then I clicked on the software tab and realised there was no driver for my mouse.
                   Where can I find the synaptic touchpad drivers for Hp Pavilion dv7 2045eo? and If it is not a problem with the driver where can I find its solution?

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are facing difficulties with the Touchpad of your Notebook
    We will surely assist you with this
    Steps to drain the Static charge and loading default BIOS settings to resolve the issue
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
    Step 03. Press and Hold the Power Button of the Notebook for a full minute
    Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
    Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
    Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
    Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
    Step 08. Now please wait till the Unit loads the Windows Operating system
    Now please re-install the touchpad drivers from HP Website in order to resolve the issue
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • B5400 Synaptics Touchpad Problem

    Leider musste ich jetzt nach ein paar Tagen bereits feststellen, dass das Touchpad sehr oft zicken macht. Das Problem ist, dass es in diesen Momenten irgendwelche Multitouchgesten erkennt, die aber nicht ausgeführt worden sind, so zB: - Plötzliches zoomen in Dokumente, Browser (musste ich jetzt ausstellen, sonst wärs unmöglich..)- Keine Reaktion, meist mittig des Touchpads. Am Rand ging es dann manchmal. Praktisch Arbeitsverweigerung.- Wenn keine Reaktion kommt, aber man trotzdem auf dem Touchpad rumwischt, dann fängt es oft an zu scrollen. Ebenfalls nicht tragbar beim Arbeiten. Die Treiber habe ich jetzt wie oft runter- und wieder neuinstalliert.. Dabei habe ich sowohl die Synaptics Treiber der Synaptic Homepage probiert (lässt sich nicht installieren, da Fehlermeldung) als auch die Lenovo Treiber, die angeblich zum B5400 passen. Mit sauberem Hoch und Runterfahren nach jeder Installationsaktion. Keine Besserung. Das komische ist, dass es eine Zeit lang mal sehr ordentlich funktioniert und plötzlich anfängt sich zu verweigern, weshalb ich glaube, dass die Hardware soweit funktioniert. Konkret habe ich das B5400 MB82AGE.//e: Mit Windows 8.1

    Nachtrag.... Nachtem ich mit dem Lenovo Support geredet habe ist denen das Problem nicht bekannt. Steh ich nun im Wald ??? Ich soll mein Lappi einschicken und es wird getestet. Wenn nichts gefunden wurde liegt es nicht am Laptop . Wenn ich danach weiterhin das Problem habe  ist dies dann kein Lenovo Problem und soll mich an den Händler wenden. Der Händler verweist auf Lenovo. Das ist doch ein Katz und Maus spiel. In diesem Forum wird genauso diskutiert da es probleme mit der M Serie und B serie gibt unter win7 und win8.1 http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/B5400-Touchpad-problems-win8-1/m-p/1471722#M53914  Herr Marcel_Lenovo Spezialist wie kommt dies zu stande das diese Problem nicht im technical Support NICHT bekannt ist????  

  • Does anyone know why a web page would suddenly pop up telling me I have a computer virus and need to call them?  When I've called they said they needed access to my computer in order to fix the problem - which I didn't do.  Is this legit?  An Ad?

    Does anyone know why a web page would suddenly pop up telling me I have a computer virus and need to call them?  When I've called they said they needed access to my computer in order to fix the problem - which I didn't do.  Is this legit?  An Ad?

    That is not legit, it is a scam to gain access to your computer and information.
    You can protect against pop-up adware with the AdwareMedic tool Thomas Reed has http://www.thesafemac.com Tom is a major contributor on these communities and great security guy.

  • Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

    Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Why is the https protocol used on all pages of arch wiki & forums ?

    I don't know if it's true, but I heard that the https protocol requires more server resources than http, maybe because the server has to encrypt the data before sending it to the client. Therefore, as far as I know, https is usually used only on web pages containing login forms, and others that transmit sensitive data. I'm not complaining about the wiki or forum performance, they're loading fast, but is there a reason for using https on all pages of arch wiki and arch forums ? Shouldn't https be used only for logins to the wiki and forums, and http for all other pages, just like archlinux home page ?
    Last edited by Chrys349 (2011-10-14 00:14:54)

    I don't know the specific reasons as far as Arch is concerned, but there is a trend... See for example the HTTPS Everywhere extension. Many sites started offering or forcing https (including Google.) This can help avoid censorship and eavesdropping, two things that are on the rise too in many countries.

  • Images on Arch wiki

    Uploading images to the Arch wiki seems to be forbidden for normal users.
    Why is that?
    All in all, the wiki seems to contain very few images.
    Is that an explicit rule?

    karol wrote:Yup, only some icons got uploaded.
    https://wiki.archlinux.org/index.php/He … nt_content
    Ok, that page confirms it's an official policy, but it doesn't explain why.
    Is server space an issue?
    Or is it to ensure that users of text-based browsers can see all information on the wiki?
    karol wrote:What exactly did you want to include?
    For one thing, I was wondering in general why the wiki articles are not decorated with the occasional screenshot or diagram etc. like in most other wikis.
    For another, I would really like to use the following two images in feature comparison tables (example) in the wiki, where otherwise the words "Yes" and "No" would appear: 
    It would just make it so much easier for the reader to get an instant overview of the information contained in the table at a glance, as well as to find a specific piece of information in it.
    Using the relevant html magic, it should be possible to make sure that browsers which can't show images will continue to show the words "Yes" and "No" in their place.

  • Add Persian Language to Arch wiki

    Hi there
    I am a persian and asking developer a request
    We are 10 people to translate arch wiki for persian users
    and want to work inside wiki.archlinux.org
    please  open a article for this language with  ( RTL ) right to left language support
    I don't know where I should say this offer but I hope you help me
    then I will help  thousands Persian people that wana install arch linux
    Thank you very much
    I am amateur for translate Persian to English so forgive my poor English and my bad grammar
    But I'm good at translate English to Persian
    Last edited by eMan (2010-11-06 21:10:33)

    The web master of the Persian Arch Linux website http://archlinux.ir/ recently contacted us with a similar request. Are you working together?
    As I said to him:
    pointone wrote:
    Note that we are moving away from a single international wiki.archlinux.org. See https://bbs.archlinux.org/viewtopic.php?id=95360 for details. Please
    consider hosting a fully-internationalized wiki at http://wiki.archlinux.ir/ instead. This will allow you to keep the user interface, system messages, templates, etc. in Farsi, and generally simplifies maintenance in the long run.
    If this is not a viable option, please read Help:i18n and Help:Editing and begin translating articles. We will add an appropriate i18n language link once pages exist.
    See the Hebrew pages (e.g. Main Page (עברית)) for right-to-left examples. You must use:
    <div style="direction: rtl;">
    within the wikitext.

  • Hey!. I have a problem Adobe premiere didn´t appear on my crative cloud, I don´t know what to do!

    Hey!. I have a problem Adobe premiere didn´t appear on my crative cloud, I don´t know what to do!

    Rajshree is correct, 64-bit apps don't appear in the Creative Cloud app on a 32-bit computer/OS. We have this document about this issue here too: http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

  • Photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1

    photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1
    can someone help me with this issue?

    Two suggestions:  the first one is a workaround. You just have to drill down your program file tree to Adobe Photoshop Elements Organizer and find the .exe file - the one specifically for Organizer, not Elements.  Make a shortcut to that file on your desktop and it will open Organizer. The second suggestion resolved the problem altogether for me. I actually called Dell and after working with several different techs over several different days, I talked to a tech in premium support who was excellent. I discovered from them that it is actually a problem with the windows system files. I have 8.1.  I went through a "refresh" on my computer which rebuilt all the files. Then reinstalled Adobe as well as my other programs again and Photoshop Elements Organizer works from the standard desktop shortcut.

  • No sound with apps and alerts unless headphones are in. Everything else works well. I tried resetting but it didn't solve problem.

    No sound with apps and alerts. Everything else works. Tried resetting, didn't solve problem. Apps have sound with headphones only

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • I can't activate my programs even though I paid for a subscription.  I did a chat with the help desk and they didn't solve my problem.  I want to cancel my account.  Please contact me since the chat is down

    I can't activate my programs even though I paid for a subscription.  I did a chat with the help desk and they didn't solve my problem.  I want to cancel my account.  Please contact me since the chat is down

    Activating after a Find My iPhone lock bricks the device if you don't know the password used by Find My iPhone.
    Read through this article to find if your device has an activation lock.
    http://www.macworld.com/article/2048739/get-to-know-ios-7-activation-lock.html
    If this is what you have - the news is bad:
    http://www.cultofmac.com/246755/why-ios-7s-activation-lock-is-a-disaster-waiting -to-happen/

  • Music on iPhone4 4 automatically shuffles music and shuffle is not turned on in anyway. Anyone know how to fix this or is anyone having the same problem? This didn't start until the big update a month ago!!

    Anyone know how to fix this or is anyone having the same problem? This didn't start until the big update (5.0) a month ago!!
    When playing music there is no shuffle button like there was before... On the playlist there is a shuffle bar but this does nothing when I touch it. It's either stuck on my music is messed up.
    Any ideas??

    Start playing a song.
    Select the album artwork area for the song playing to reveal the scrubber for the song.
    Is the color of the icon located at the right of the scrubber blue?
    If so, that is the shuffle icon and blue means shuffle is on. Select the icon to turn shuffle off. White means off.

Maybe you are looking for

  • About Flash technology

    Hi all I'm a java game developer and I really like Java but I'm seeing the Macromedia really got to make its client the best for internet media and gaming. I'm thinking of migrating.. but I'd like to know some things. Where can I find reference on in

  • NetworkInterface objects disappear on Mac computers

    In our Java 6 program, we are trying to get the Mac address of all the network interfaces on the machine. It calls NetworkInterface.getNetworkInterfaces() to get a list of them. On Windows with the Sun JRE, everything works fine. However, on Mac comp

  • Download adobe flash player for iPad mini?

    How can I download Flash player on iPad mini?

  • Where is my artwork?

    I have uploaded all of my artwork to songs that i have copied from my cd's. I can see the artwork when playing the songs in Itunes, however, they are not showing up when i play them on my ipod. How can I fix this? Thanks!

  • Connecting Hana view to SAP Lumira

    Hi , I created a view in Hana system and used the Connect to SAP HANA One source option in SAP Lumira for the Dataset. On the next screen i am able to see all views under different packages from HANA, but i am not able to see the new view created by