Scrolling through the grid is incredibly slow on my Surface Pro 3 with Type Cover or touch, how do I speed it up?

If I swipe up or down with two fingers on the Type Cover touchpad (my preferred scrolling method), or swipe with my finger on the screen grid itself, it takes like 15 swipes to see all new thumbnails (small size). I don't mean because of thumbnail lag or anything, it's just like the scroll speed sensitivity is just set very, very low. if I page up / down or drag the scroll bar it's fast but I want to scroll normally like any other program. I tried raising the amount of lines skipped by scrolling in Windows 8 settings but it doesn't have any affect, and scrolling in any other program is nice and fast.
How do I fix Lightroom 5.7?

How large is your HD and how much space do you have left?
Care to share which OS you are using?
Check out the following & do the necessary: 
User Tip:  Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac

Similar Messages

  • Surface Pro 3 Type Cover Scrolling Behavior

    I asked the same question in the surface comminity forum, and the support engineer suggested that I relay my question here.
    I've just purchased a surface pro 3 with type cover. It's a great machine and I use it for web developement projects on the go. A major part of the stack I use has to be run in linux, so I run a virtual machine with ubuntu server. I use putty to ssh into
    the vm, and rely on vim for code editing. On my previous machine I was able to get mouse scrolling support working in vim, as the events are relayed over by putty. This works even with 2 finger scrolling on trackpads of various sorts. However, this does not
    work on the type cover for surface pro 3.
    After some observations, I realized that the 2 finger scrolling on type cover's trackpad would trigger a screen scrolling animation when the scrollbars hit the end points, a behavior similar to scrolling via the touch screen. So I am guessing that instead
    of using the traditional mouse wheel events, the new trackpad uses screen scrolling events? Which explains why putty couldn't relay the scrolling to vim.
    I am wonder if this behavior can be optional or not. Perhaps a configuration somewhere would allow me to make the trackpad fire the usual mouse wheel like scrolling events so that my putty + vim combination could still benefit from the trackpad?

    Hi,
    Regarding Surface pro 3 type cover issue, we may first take a look at the following troubleshooting guide:
    Troubleshoot your Surface Cover
    For the type cover usage, please see:
    Type Cover
    Apologize for that we don't have enough materials to check the issue you mentioned here, for the usage of surface Pro 3 and its type cover, for special personal support, please take a try with the
    Contact us.
    Thank you for your understanding.
    Best regards
    Michael Shao
    TechNet Community Support

  • DataGrid dropdowns getting reset on scrolling through the grid

    I have a datagrid which contains two columns with dropdowns.
    The dropdown values are set to particular index programmatically.
    But when the scroll bar of the grid is made to scroll from top to
    bottom and then back to top the selected values get reset. Any idea
    about this behaviour?

    Yes. item renderers are "recycled". Flex only creates enough
    for the visible rows. When you scroll, the item data for the
    scrolled-into position item is sent to the renderer(through the set
    data() setter), which must use that data to render its visible
    state.
    This means all aspects of the item renderer must be data
    driven. You cannot do an data oriented work in initialize or
    creation complete, but must override the set data() method. Best
    practice is actually a bit more complicated thatn that. You will
    have toset the selectedIndex of the renderer combobox from some
    value stored in the item.
    Google: Alex Harui item renderer recycle
    For a full explanation and examples.
    Tracy

  • I have installed about 35 add-ons in my firefox 4 , and it got very slow in brosing sites like facebook and youtube and others..always at scrolling through the page or clicking on buttons...etc

    i have installed about 35 add-ons in my firefox 4 , and it got very slow in browsing sites like facebook and youtube and others. at scrolling through the page or clicking on buttons...etc
    this is nit occuring in google chrome in the same degree

    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Acrobat Pro 9.0 freezes when viewing/scrolling through the table of contents of a document

    I am hoping someone can help me or has experienced the same problem I'm about to describe. I belong to the technical publications group of a fairly large company and I review a lot of PDF documents. I just installed Acrobat 9.0.0 (via CS4 Design Standard) and I've noticed on larger documents where there's a full page or several pages worth of Table of Contents, Acrobat 9.0.0 seems to freeze up when I begin scrolling through the TOC. For example, if I want to use the Text Edit tools or use a sticky note, when I press on an icon, Acrobat will freeze for a good 10 seconds, then will allow you to press the icon. It tends to freeze each time I want to make my next edit or even pressing the up/down arrow buttons to go to the next page. Once I get through the TOC pages, Acrobat seems to function normally--no freezes.
    Has anyone experienced this? Would appreciate any kind of advice on how to fix--perhaps there's a patch or update?
    I didn't experience any of this using Acrobat 8.0--I never had any real problems with Acrobat until 9.0.0.

    Your issue may not be related to a difference between v8 and 9.
    I have not had this problem on my computers, but a coworker had this issue. For many documents that others were able to open and scroll through without issue, his computer was freezing and unfreezing.  IT determined his graphics capabilities were not able to keep up with the requirements of working with larger documents and gave his computer a RAM upgrade and a new graphics card. Particularly during scrolling, higher demands are made on the computer to graphically render and re-render page content. Documents giving him problems before became a non-issue.
    A new graphics card is obviously a $$$ solution, but you might want to check to see if your RAM meets the minimum requirements and check to see if there are any program updates (Help > Check for Updates).
    I have had an issue of pdfs freezing, but not specifically in the table of contents areas. If your document has pages with images that have an unusually high number of layers, it may affect the ability to work effectively in the document.

  • Scrolls through the music library but doesn't play.

    I have an original U2 iPod from 2004.
    It has stopped working for me. I start at the main menu. I go to Music, then to Artist (or song title), then to the song I want and when I hit the play button, it simply starts to scroll through the playlist. It won't actually play any songs.
    Do you think this is a hardware problem? I have downloaded the most recent version of software so that's up to date.
    Any advice would be appreciated. Thanks,
    DP
    Gateway   Windows XP  

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    Troubleshooting songs that skip on iPod
    iPod: Troubleshooting songs and audiobooks that won't play

  • My ipod classic has started making a mewing sound and all it does is scroll through the songs.  It will not play except when connected to my computer.  I tried resyncing and that did not work. How do I fix this problem?

    My ipod classic has started making a mewling sound and all it does is scroll through the songs.  It does not play on my Bose sound dock or through earbuds.  It will play when connected to the computer...but that makes it hard to take it on a walk with me   I thought it might be a synching problem so tried that--still doesn't work.  How do I fix this problem with out restoring it to the factory setting?  I do not want to lose all my music content as some of it I cannot replace easily.  Please help with suggestions and advice. Thanks.  Karen in GA

    Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
    See this Apple support Article
    http://www.apple.com/support/ipod/five_rs/classic/
    You did not by chance bought the Hello Kitty special edition?
    Have nice day!

  • My iphone 4s is dictatating everything. I can no longer scroll through the phone. I have to double click all icons How do I turn this off?

    My iphone 4s is dictating everything. I can't scroll through the phone. I have to double click on everything. How do I turn this off?

    With Voice Over, you highlight whatever you are trying to select and then double tap anywhere on the screen to select.
    So for your password of 1234 you have to
    "Highlight 1, then double tap the screen, Highlight 2, the double tap the screen,... etc."
    In order to remove you have 2 options:
    Option# 1 – Turn off Voice Over
    Go to setting by, highlight "SETTING
    Double tap screen to go into settings
    Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
    Double tap screen to go into general
    Use 3 fingers to (swipe) scroll of down and then highlight “ACCESSIBILITY”
    Double tap screen to go into accessibility
    Once you are in make sure that EVERYTHING in that section are shown as “OFF”
    Option #2 - Reset your Phone
    Go to setting by, highlight "SETTING
    Double tap screen to go into settings
    Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
    Double tap screen to go into general
    Use 3 fingers to (swipe) scroll of down and then highlight “RESET”
    Double tap screen to go into reset
    Select “Reset all setting” and continue to follow the instruction
    (When you reset, all of your data and music WILL NOT erase. So don’t worry about that)
    Hope this helps.
    - Hugo

  • When sending a pdf as an attachment I cannot scroll through the pdf.  Nor can I look at Outlook 2010

    Frequently I create a pdf and then I want to send it.  After clicking send and the email pops up I compose the message.  However, as I compose it, I have a question requiring me to look at the pdf.  However, I can't page through the document because it's locked by Outlook.  Also, I can't look at other emails while this message is open.
    A workaroud is to save the document in Outlook.  Then I can scroll through the pdf or view other emails but I have to go to the drafts folder and reopen the email to edit it.
    What I'd really like to see is a way to set the default when sending a pdf in Outlook to have it always send a copy.  That way the pdf isn't locked and I don't have to go throught this workaround.  I encounter this every day.  Isn't there some solution to this?

    Edit>Preferences>Email accounts>List of email accounts. Click the drop-down that says "add account" and select Gmail. After adding it, you can go to the account area and change it to default.

  • Content canvas and  a stacked canvas moving when scroll through the details

    Dear Friends
    I have Mater and Details Block , and I have two canvas content canvas and a stacked canvas, and the a stacked canvas on top of content canvas , and I have set the horizontal and vertical scroll bar for the stacked canvas , my problem is that when I inquire and click on the details block which is on stacked canvas the header content canvas is moved up
    and what I want the header to be stable and not moving when scroll through the details .
    Best regards
    Jamil Alshaibani

    if the canvas is moved during runtime in general the problem is that is does not fit completly in the window. Try to adjust your window-size so that the whole layout fits into it.

  • Compiled PDF (from 8MP images) lagging/flashing whites/refreshes while scrolling through the pages.

    Hi guys,
    I would like to find out how exactly to optimize the pdf file so that I don't experience the problem mentioned in the subject line.
    what i did was take pictures of a few documents (80% text, 20% images) using a Canon G12 (had similar results with a DSLR too), and compiled them into a 200page PDF, using medium quality in PDF complier.
    after that, i used Clearscan to OCR the whole thing, + cropped the white borders to make it fit nicely.
    however after saving the PDF file, scrolling through the images feels laggy, it needs to "refresh" itself every now and then, which appears as flashing whites.
    how do i prevent that?
    i'm extremely certain it's not the problem with the computer.
    i have tried with a quad core i7 sandy bridge with 16gb ram and it lags. it lags on other computers as well. however, a normal ebook with images and text scrolls through smoothly. what is it that i'm doing wrong?
    i am on Acrobat X Pro by the way.
    Thanks!

    Hi guys,
    I would like to find out how exactly to optimize the pdf file so that I don't experience the problem mentioned in the subject line.
    what i did was take pictures of a few documents (80% text, 20% images) using a Canon G12 (had similar results with a DSLR too), and compiled them into a 200page PDF, using medium quality in PDF complier.
    after that, i used Clearscan to OCR the whole thing, + cropped the white borders to make it fit nicely.
    however after saving the PDF file, scrolling through the images feels laggy, it needs to "refresh" itself every now and then, which appears as flashing whites.
    how do i prevent that?
    i'm extremely certain it's not the problem with the computer.
    i have tried with a quad core i7 sandy bridge with 16gb ram and it lags. it lags on other computers as well. however, a normal ebook with images and text scrolls through smoothly. what is it that i'm doing wrong?
    i am on Acrobat X Pro by the way.
    Thanks!

  • Crashes when scrolling through the albums (iOS 5)

    Hi all,
    I have an ipod touch 3 gen with the new iOS 5, and every time I turn it sideways to scroll through the albums, fast, it just crashes and restarts...
    Anybody else having the same issue? It's like the iOS is to taxting for the ipod.
    Also when locked and I double tap the Home button for the quick controls, I get some micro freezes when forwarding or backwarding songs...
    Is anybody else having this problem?
    Is there something I could do to improve performance?
    Will this be fixed on the next update?
    This is driving me nuts!!
    Thank you.

    Hi all,
    I have an ipod touch 3 gen with the new iOS 5, and every time I turn it sideways to scroll through the albums, fast, it just crashes and restarts...
    Anybody else having the same issue? It's like the iOS is to taxting for the ipod.
    Also when locked and I double tap the Home button for the quick controls, I get some micro freezes when forwarding or backwarding songs...
    Is anybody else having this problem?
    Is there something I could do to improve performance?
    Will this be fixed on the next update?
    This is driving me nuts!!
    Thank you.

  • My pictures and videos are disappearing as I am scrolling through the iPhoto

    My pictures and videos are disappearing as I am scrolling through the photos I just downloaded to iPhoto.

    Nightwing75 wrote:
    I accidently pressed restore my iphone to an older version
    Apple does not allow this.  So somehow, you have used some non-allowed process.
    I assume you mean "some older version" of iOS.

  • IPhoto 9.5.1 has suddenly got all blank photos.  If I scroll through the photos they appear briefly.  I have not updated to Yosemite.  I have been through the database rebuild and repair routines.

    iPhoto 9.5.1 has suddenly got all blank photos.  If I scroll through the photos they appear briefly and disappear.  I have not updated to Yosemite - I am still running Mavericks on an iMac.  I have been through the database rebuild and repair routines.  I uploaded photos and movies three days ago and all was well.  Then I used the migration assistant to copy from Time Machine to a new Macbook Air and noticed blank photos.  I thought it was a problem with the Macbook Air, but then I went back to the iMac to check and they were all blank as well.

    what does appear after the photo "flashes"?
    Have you repaired permissions? If not backup your iPhoto library and option-command launch and repair permissions - then repair the database and if needed rebuild the database
    If that does not do it down iPhoto Library Manager on the iMac and use the free trial's rebuild command to create a totally new library leaving the existing one alone
    Once you have the iMac working correctly then connect the two systems together (or use an external drive formatted Mac OS extended (journaled) ) and drag the iPhoto library form the iMac to the pictures folder of the MBA (rather than migration assistant)
    LN

  • Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

    Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

Maybe you are looking for