Scrollwheel stopped working in LR2.5

The scroll wheel on my mouse has stopped functioning in Lightroom, but works fine in all other applications. The mouse otherwise works fine in LR, so I can use the sliders on the sides of the panels, but it is far less efficient and slows my workflow considerably. Has anyone else had this problem? I have been using Lightroom for several years and use it to catalog, keyword, and organize my photos. LR is installed on both my laptop and desktop computers and this problem appeared on both around the same time several months ago. I did try creating a new user account - no help; and I tried deleting/replacing the agprefs file - also no help. Any help or advice would be greatly appreciated.

Yeah, my scroll wheel worked fine too for most of the time I've been using Lightroom, but then it mysteriously stopped working several months ago.
How hard is it to back up my catalog (which is huge and precious), uninstall Lightroom and then reinstall it and re-import the catalog? I am thinking this might restore the full function of my mouse, but have been reluctant for fear of losing some or all of my work, or it being a many-hour consuming process.
I don't think the problem is the mouse settings because the scroll wheel works fine in all other programs... and I use it all the time, but I'll take a look. I guess my problem is rare.
BTW, I am on a PC using Windows XP pro, Photoshop CS3, and Lightroom 2.6.

Similar Messages

[SOLVED] Mouse buttons stopped working

I have a Logitech Marble Mouse (connected via a USB to PS/2 adapter). It has no scrollwheel, so I set up the small "extra" pair of buttons to toggle "scroll mode" in certain applications (like Firefox & Chrome). When activated, moving the trackball scrolls the page up/down/left/right instead of moving the pointer.
It's been working fine for months, but a week or so ago, the scroll buttons suddenly stopped working. The settings are contained at the very bottom of the file /etc/X11/xorg.conf.d/10-evdev.org, and the only other file in that directory matches "ThinkPad HDAPS acceleromer data", so shouldn't affect the mouse settings.
(The buttons that don't work are "B" and "C", which both activated scroll mode:)
# Logitech Marble Mouse via PS/2
Section "InputClass"
Identifier "Marble Mouse via PS/2"
MatchIsPointer "on"
MatchProduct "ImExPS/2 Generic Explorer Mouse"
Driver "evdev"
Option "Protocol" "ExplorerPS/2"
### On line below:
### Buttons on mouse are A,B,C,D (l-to-r): Left big, left small, right small, right big
### b = A & D simultaneously; - = no button
### Physical button #s: A b D - - - - B C
Option "ButtonMapping" "1 9 3 4 5 6 7 8 2"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "9"
Option "EmulateWheelTimeout" "300"
Option "XAxisMapping" "6 7"
Option "YAxisMapping" "4 5"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "false"
EndSection
I've tried playing around with the button-mapping, even jumbling 4 5 6 7 to 5 4 7 6 (which, I thought, should invert the movement of the pointer), but none of this has any effect. I've checked /etc/X11/xorg.conf, and I don't seem to have any mouse-related settings there... and I've read the wiki, but I can't see what I'm doing wrong!
Can anyone help? :-)
Last edited by esuhl (2012-08-20 16:52:25)

I don't think, that evdev has something to do with the xf86-input-mouse. But I belive, this is a real issue, because my good old configuration stopped working (buttons aren't customized) today as well. Looks like the reason is hidden somewhere in yesterdays pacman -Syu .
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "CorePointer"
Option "Buttons" "9"
Option "ButtonMapping" "1 9 3 4 5 6 7 8 2"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Last edited by vlastikcz (2012-08-08 20:12:33)

Volumeicon volume keys stop working after adjusting volume via icon

When Volumeicon is first started, the volume keys work fine, (although it doesn't show the volume bar like it does when you scroll on the icon for some reason). When I adjust the volume by scrolling the mousewheel on the icon, the volume keys stop working and volume can only be adjusted via scrollwheel. Volumeicon must be restarted to restore volume key functionality.
Why is this happening? What's going on?

Is this something that worked previously but then stopped working correctly?
What window manager / desktop environment are you using?
If you start volumeicon from the command line then use it are there any error messages?
Alternatively, does the volumeicon-gtk2 packagen in the AUR work better?

LR3 64 bit stops working when I try to import photos

I recently installed, uninstalled and re-installed LR3 and in my opinion it SUCKS! Every time I try to import photos the program stalls and quits responding. It eventually (after several minutes) gives me a message that "Lightroom has stopped working and will close." When I installed it, I created a new catalog and did NOT upgrade my existing LR2 catalogs so there shouldn't be any cross contamination with older file metadata as suggested in other posts. Has anyone else experienced this problem? My OS: Windows Vista 64-bit, 8GB RAM. I didn't have any problems with LR2, nor do I recall this being a problem with LR3-beta. Needless to say....I am NOT happy at the moment!!!!

I had this problem with LR2, seemed to work Ok but when I was downloading Photos it would crash, ended up being a bad MB for me and this happened to me a second time as well and found out the processor wasn't Seated correctly, it was heating up, re-seated it an NP since!
I'm not a Geek and know very little about this stuff, the first time I had a problem with this I took my puter to the local Micro-Center store, my brother builds, upgrades my puters for me and the parts came from Micro-Center, they diagnosed the Bad MB (Gigabyte) and replaced it for free and my brother spotted the heating problem with the MB! I think in this incident I got a bigger power supply and new fan?
Don't know if this is your problem or not? Just trying to help, I had no other problems except for when downloading Photo's, does this take extra processing power?

Lightroom 2.7 loads then stops working

Hello, When I try to start LR2.7, the program loads, I can see the filmstrip at the bottom and the menus and then Windows Vista( 32B) intervenes and says the program has stopped working. I get the following problem report (see below), which I don't understand.   I reinstalled LR from the original CD, but the same sequence of program loading and then aborting happens. I don't understand what is going on. Help appreciated.
Problem signature:
Problem Event Name:     BEX
Application Name:     lightroom.exe
Application Version:     2.7.0.2
Application Timestamp:     4bb30228
Fault Module Name:     MSVCR80.dll
Fault Module Version:     8.0.50727.4053
Fault Module Timestamp:     4a594c79
Exception Offset:     0000faa3
Exception Code:     c000000d
Exception Data:     00000000
OS Version:     6.0.6001.2.1.0.768.3
Locale ID:     1033
Additional Information 1:     a388
Additional Information 2:     cb1346f285b14b60ce06bcb7640ef607
Additional Information 3:     bf4c
Additional Information 4:     e60f6f5396b25611895b96ec76409f44
TIA,
-MCM

Disable all firewall on the computer ... if facing probile on all the computers. ...
Reset & reconfigure the router ...

Itunes wont open and gives me a message saying "Itunes has stopped working". What can I do to fix this?

I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???

First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)!

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

AdapterDeviceID: 0x9712
AdapterDriverVersion: 8.861.1.2000
AdapterSubsysID: 164c103c
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
AvailablePageFile: 13967405056
AvailablePhysicalMemory: 6222434304
AvailableVirtualMemory: 3783245824
BIOS_Manufacturer: Hewlett-Packard
BlockedDllList:
BreakpadReserveAddress: 46661632
BreakpadReserveSize: 41943040
BuildID: 20141113143407
CrashTime: 1417153956
EMCheckCompatibility: true
EventLoopNestingLevel: 1
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1416895140
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 175
StartupTime: 1417153798
SystemMemoryUsePercentage: 25
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 16630353920
TotalPhysicalMemory: 8316153856
TotalVirtualMemory: 4294836224
URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
Vendor: Mozilla
Version: 33.1.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.
AND:
A plugin container for firefox has stopped working.
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 33.1.1.5430
Application Timestamp: 54656826
Fault Module Name: mozalloc.dll
Fault Module Version: 33.1.1.5430
Fault Module Timestamp: 54654321
Exception Code: 80000003
Exception Offset: 00001425
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7. Message shows that iTunes has stopped working. This happens every time. I have updated iTunes Software. Will not solve the problem. What is wrong

I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
          iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
          "Check online for a solution and close the program"
          "Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
     Here are some of the Problem Details:
     "Problem signature: APPCRASH
     Application Name:     iTunes.exe
     Application Version: 11.0.1.12
     Application Timestamp: 50c8fc7e"

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

Can't get itunes. I get the following message when I click on either the shortcut or the program. It says ITunes has stopped working and I can either check on line for a solution and close the program or just close the program.

When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
Thanks

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

ITunes 10.3.1 has stopped working in Windows 7 64bit

I just upgraded to Windows 7 64 bit and I downloaded iTunes 10.3.1 for Windows 7 64 bit. My Quicktime player is working fine but everytime i tried to open iTunes, it gives me an error message that says iTunes has stopped working. I need help trying to fix this, I already tried uninstalling, re-installing, and mostly every suggestion in the Apple support forum and it still does not work.
This is the information I have on the Problem Details:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Try copying the QTMovieWin.dll in the c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

ITunes 10.6 and Windows 7 - iTunes stops working!!!

Installed iTunes 10.6 and now I get the iTunes has stopped working message when I attempt to add folders or sync my devices. I have uninstalled and re-installed to no avail. I have tried safe mode but it still will not sync. This only started after the update to 10.6. Everything was fine until then. I went to the Apple store and they were NO help at all, referring me to the iTunes support page on the internet. DUH!! Did that already! Please, if anyone has solved this issue, tell me how. I tried installing the old version of iTunes, but then it wouldn't open because the library was created by a newer version...so frustrating! Please help!

Mac prints. PC does not. Bonjour Printer Wizard found the printer, so there's some communication between the two (although the printer never came on, but I assume the AX knows what it’s plugged into).
One odd thing is that, after installing the printer driver (downloaded from Brother), Bonjour Printer Wizard listed Brother as a printer manufacturer three times, only one of which shows the HL-2040.
The las time I tried printing from Windows the printer turned on, but did not print.

Scrollwheel stopped working in LR2.5

Similar Messages

Maybe you are looking for