Scrubber works in test; not after "Publish"

Following Lee Brimelow's tutorials, I have flv video running
nicely with controls and a scrubber bar. When I test the movie, the
scrubber works perfectly. But after I publish it and try it in the
browser, it looses one functionality: The video image remains as a
freeze frame when I move the scrubber. The scrubber is working, in
that it does allow me to move quickly through the movie but the
image remains frozen in a freeze frame so I cannot easily find the
location where I want to release the scrubber. Can someone please
help me figure out the difference between the scrubber's
performance in a test and it's performance in the browser? (My
action code is a direct cut-and-paste from Lee Brimelow's updated
instructions for this job.) Thanks.

Hi Tim
You said:
Why email? In a word BUDGET. Next year I should be able to
afford some type of LMS. Hope that clears up the mystery.
You might consider Moodle (
http://moodle.com )
This is an open source (Read free to use) LMS. As I
understand it, there is quite an active community of users too.
Cheers... Rick

Similar Messages

"Send email" works in preview, not after publishing

I have been asked to have our learners' quiz results emailed,
as we don't have an LMS. I can get an email to generate in preview
mode, but once I publish the file, the email button becomes
non-functional. In the message area of the browser a message
saying, "Error on page." is displayed. Any ideas would be
appreciated.

Hi Tim
You said:
Why email? In a word BUDGET. Next year I should be able to
afford some type of LMS. Hope that clears up the mystery.
You might consider Moodle (
http://moodle.com )
This is an open source (Read free to use) LMS. As I
understand it, there is quite an active community of users too.
Cheers... Rick

SWN_SELSEN not working in test client after client-copy

Hi all,
We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items. Because of client-copy, I found that tables SWN_NOTIF, SWN_NOTIFTSTMP, SWN_SENDLOG, SWN_TIMESTAMPS are all empty in test client.
Please advise how to make report SWN_SELSEN back to work in test client. Thanks.
<< Additional information >>
(1) Run report SWN_SELSEN_TEST with test Case 5 - Simulate Send Only. After this, some entries were written to above tables. But test on new workflow item, the schedule report SWN_SELSEN still fail to trigger notification.
(2) Run report SWN_SELSEN_TEST with test Case 4 - Send One Message Only. It triggered notifications for all active workflow items and sent out several hundred emails including workflow item created in step 1. However, further test on new workflowitem, the schedule report SWN_SELSEN is still unable to trigger notification.
I think there may be something else missing, like the timestamp of delta. Please help.
Regards,
Donald

Hello,
I've experienced a few cases where stopping SWN_SELSEN and then restarting it helped to fill up SWN_TIMESTAMPS with proper values. How does that table look after you run it?
What is SWN_SELSEN_TEST?
Chck in SLG1 to get an idea of why it's not working. You can also run SWN_SELSEN in the foreground and debug it to see exactly where and why it goes wrong. Also check ST22.
regards
Rick Bakker
hanabi technology

HTML Redirect is working in muse but not after publishing... HELP!

I am setting up a "Coupon code" for a website I work on. I have set up a basic HTML Redirect box. It works properly in Muse but after publish it does not work correctly anymore. I understand the "password/coupon code" is available to find in the page code, and that's OK, thats the way i designed it. Here is the link to the page Ticket Center the coupon code is GOLDEN (all caps). It should redirect to: GOLDEN PROMO CODE Please let me know what i am missing. If it is not possible to use this code with muse after its uploaded, any suggestions would be helpful. Thanks!
Here is the promo code box code:
<div class="wrapper">
    <form class="form1" action="ticket-center.html">
        <div class="formtitle">
        </div>
        <div class="input nobottomborder">
            <div class="inputtext">
                Coupon Code:
            </div>
            <div class="inputcontent">
                <input type="password" id="password" /><br />
            </div>
        </div>
        <div class="buttons">
<input class="orangebutton" type="submit" value="Submit" onclick="if (document.getElementById('password').value == 'GOLDEN') location.href = 'promo-1sae452316ad.html'; else alert('Invalid Promo Code! Please try again. CASE MATTERS');" />
        </div>
    </form>
</div>

Presuming that I have 13 folders/directories that are
created by iWeb for each of the 13 'pages' in my
site, then I assume that to turn off the nav_bar, I
should paste 'the code' into each of the
[foldername].js files.
Is this correct?
I believe so, yes.
And to maintain this, I should be prepared to use
MassReplaceIt (+/-) to refresh this info after
Publishing to Folder any cosmetic and content
changes.
Yes
Before I do the 'paste', I would like verification
that:
1) it is in fact the [filename].js file that is my
correct choice/target.
Yes
2) when viewing the contents of the ...js file, it
seems like there would need to be some curly braces (
{ whatever ) stuff as well.
Hmm, I think it's ok just the way Cyclosaurus put it
document.getElementById('nav_layer').style.opacity = 0; // 0 = nav layer off, 1 = nav layer on.
But I could be wrong about that.
3) Does 'the Code' need to be inserted in any
particular place in the file?
Don't think so, no, but don't put it in the middle of something, if you know what I mean. The beginning or end would be best.
4) Today, I will work on moving the Content to the
Body instead of the NavBar area, but mo betta I could
just shut off the NavBar function entirely.
Well if you can do it without editing the js (move the content) then you won't have to keep re-editing after each publish.
5) Do you like Medium Roast or Dark roast - whole
bean or ground?
Hee hee... ALL OF THE ABOVE!!!

3D Tween not working in Test mode or Published version

Hi, I'm pretty much tearing my hair out with this one. I am
creating a 3d tween using the 3D rotation tool and everything looks
great when I play it on the timeline but as soon as I test or
publish the movie, the image is static, doesn't rotate and appears
in the top left corner of the movie. I've tried it on three
different computers and still have the problem so I guessit's got
to be with my process.
Draw a square
Convert the square to a movie clip
Insert a Motion Tween
On the final frame, use the 3d Rotation Tool to rotate the
square movie clip
Play the movie - square rotates, everything works fine
Test the movie - Square appears static on the screen (appears
in top left corner of movie) and does nothing
Can anyone see anything I'm missing from that process or know
of any setting that may be causing the problem. Any suggestions
would be greatly appreicated.
Thanks,
Dan

Thanks - got the file.
So, I added a third instance next to the other two just fine - it scrubs and publishes. (my steps were to take the trigger instance from the library, and I copy and pasted the motion from one of the other clips to the third instance)
So that doesn't seem to be the problem. Could you add the steps you're using where the 3D doesn't animate, or add the non-working file?
Thanks!

VI works in IDE, not after being built

This is going to be a little long, but I'm not sure I have a choice. I'm using Mark Yedinak's SNMP v1 driver in LV2014 32-bit to talk to a Dell G756N rack mounted power distribution unit (think fancy power strip). My code works just fine in the IDE, but causes the program to freeze after I have built it into an executable. I have no idea what is wrong. I built a simpler example VI intending to have an easy example project (Classy Talker.vi in the SNMP Talk project) of where the VI breaks down, but it seems to work even after being built into an .exe. I built the InitializePDU.vi (the one that works) in the SNMP Talk project by dragging the innards of the problem vi (InitializeEquipment.vi in the Dell Power Supply Testing project, this one doesn't work after being built), so they should be identical.
Using logs, I've been able to track which one is the problem vi. It's the Get snmp Item(s).vi in Mark's snmp communication.llb. Here is a picture of where it fails according to my LVLog.txt file:
To recap:
In the Dell Power Supply Testing project
The Data Collection Quick Shot.vi under "Main" calls Initialize All Equipment Data-Clock.vi. The Initialize All Equipment Data-Clock.vi is responsible for reading the Equipment Config.xml file and presenting the user with choices of equipment to use with the program. The .vi then uses a factory pattern to initialize chosen equipment. 5 of the equipment types work, but the Power Distribution Unit will not complete verification after being built into an executable (this is event 10, "PDU Verifiy), but works fine in the IDE. Using logs, the probelm occurs after the class is cast to the specific class in the InitializeEquipment.vi found under "Hardware\Power Distribution Unit\DellG756N\" when it call Mark Yedinak's Get snmp Item(s).vi from his snmp communications.llb.
The SNMP Talk project was created to be similar to the problem areas of the Dell Power Supply Testing project. I was hoping it would be a simpler example so that I could get help, but to my suprise it works just fine even after being built into an executable.
The Classy Talker.vi casts the GenericPDU class to the DellG756N class, and uses the InitializePDU.vi which is the equivalent to the problem vi InitializeEquipment.vi in the Dell Power Supply Testing project. It then just reads the manufacturer and part number from the supply, which is also done in the same manner as the InitializePDU.vi.
Any help on why one built executable work and the other does not would be really appreciated.
Thanks,
Simon
P.S. I couldn't power the Power Supply Testing project here because it is 54MB, so here is a link to it in my dropbox:
https://dl.dropboxusercontent.com/u/10871313/Power%20Supply%20Testing.zip
Solved!
Go to Solution.
Attachments:
SNMP Talk.zip ‏1123 KB
LVLog.txt ‏1 KB
snmp communication.zip ‏470 KB

To follow up, Drew Pierce from NI came down to look at the issue. The morning before he came I was expanding my use of log files and finally had an executable build work. I was a little too quick to think I had the issue solved and threw a 2ms wait where the last log file was thinking it was a timing issue. Nope, it was broken again. So I put all of the logging functions back in, then took them out 1 by 1 until I found the one that fixed it. I have no idea why it fixes it, but it does. The offending vi is Mark Yedinak's SNMP Get Request. Here is the fix:
And the Write Log:
I have no idea why this works and just putting a wait doesn't:
If anyone has a theory I'd love to know.
Thanks,
Simon
P.S. I want to be clear that I'm not saying Mark's code is bad, it works flawlessly elsewhere and I'm very thankful he provided it. It has saved my life on this project.

Ethernet card - work in install, not after

Hello guys,
I'm trying to set up a server on a Compaq Deskpro EN Series SSF (PII 400). I've install ArchLinux the FTP way and it have worked well. But afer the second reboot, total network blackout. I tried to load the module of my ethernet card by rc.conf, no changes. I think it may be a matter of module option. But I don't know what option might be good.
If there is a way to see how the install script of ArchLinux configures the ethernet card (by the automatic way) this problem might be solved quickly.
The key question here is : Why does it work during the installation, but not after the second reboot.
P.S. : I had the same problem with Mandrake with the same computer.

Nobody ever reads the "about" page, eh?
ArchLinux does nothing automatically - it hides details... it's also for the experienced linux user.
You need to know
a) the correct module for your network card
b) how to configure a network
after that, a quick glance at /etc/rc.conf should make it apparent how to do it.
again: arch does nothing automatically

Pdnsd works fine, but not after reboot

Hey guys, I just installed pdnsd and it works great, except that after each reboot, the server fails.
I've included it in my daemons array right after networking, and on reboot the boot messages show that it's starting successfully, but then it doesn't work and only gives a server failed error message when I run an nslookup or dig search.
Once booted, I can run /etc/rc.d/pdnsd restart and all is working fine again.
Anyone have any idea what the problem might be?
Thanks for any help.

skymt wrote:Did you get my email? I asked you to run pdnsd as root and see what errors it prints. I've also discovered since then that pdnsd logs to /var/log/daemon.log, so the relevant contents of that file might also be useful.
Yes, I did skymt and thanks for that. I got no errors at all and it ran just fine. I had already looked in daemon.log but didn't see anything that led me to a fix.
I've found that if I use the "none" option for uptest in the server section, everything works fine on a fresh reboot. Is there any problem with me using that option? Or would changing some other option fix it, perhaps?
All the permissions seem to be in order on all files and folders related to pdnsd.
Thanks a million for the reply and help.

Report works in Designer client, but not after published to Business Objects server

Has this happened to anyone else? I have a couple of reports that work perfectly on my pc in the Designer client. I can export them to whatever format I need, and they work. When I save them to the Business Objects server, everything appears to be ok. The thumbnail on the properties tab shows the correct report with a page full of data. When I preview and when I schedule the report to run, I get incorrect data. In one case, I get an empty report. In another case, I get data, just wrong data and way too much of it. I've got hundreds of other reports that were developed and published the same way that are working correctly. Any ideas? Thanks in advance!

There may be couple of reasons. What is your data source? Verify the database in the report and check it again. Or to do more crosschecking, Create a simple report using the same database and deploy in BOE.

Azure SQL database working locally but not when published to Azure

I have an
AngularJS solution that is connecting to a SQL Azure database. When
I run the solution locally, it’s configured to connect up to the SQL Azure database, the solution works fine. However,
when I publish the solution to Azure the connection to the SQL Azure database does not work.
When debugging with Chrome I get the error Failed to load resource: the server responded with a status of 500 (Internal Server
Error)
I'm not using EF. but dapper.
My connectionstring is as follows
<add name="PortalConnection" providerName="System.Data.SqlClient" connectionString="Server=tcp:xxx.database.windows.net,1433;Database=xxx;User ID="xxx";Password="xxx";Trusted_Connection=False;Encrypt=True;Connection
Timeout=30;"/>
When I run the web solution locally from Visual Studio, my sql queries runs like it should, it's only the published version having problems.
Any ideas?
Software Developer

Hi,
Thanks for answer.
I had followed that step by step guide for deploying to Windows Azure. So that was not the problem.
But I was able to get a better error message by turning off custom error in web.config.
I got the error message: "Windows login are not supported in this version of SQL Server"
I solved this by using the SqlConnectionStringBuilder instead of getting the connection string from
web.config.
So everything works great now, just think it's strange it worked locally before..
Regards
-entery
Software Developer

Kerberos double hop works internally, but not when published via TMG

Hi all,
Have 2 x IIS 8.5 servers internally with .net applications on them
The IIS servers have been configured to use a domain account for their apppool... and credentials are pass successfully from the front end server to the back end server.
When publishing the front-end server via TMG, the front-end web pages show up fine, but the delegated credentials aren't passed to the "back end" pages and a 401 - unauthorised error is presented.
The TMG computer account has the front end and back end http SPN's defined for delegation in its AD account properties.
Is this expected ? is this a limitation of TMG ? or have I simply done something incorrect ?

Hi,
Please check the following article to see if you missed anything.
About Kerberos constrained delegation
https://technet.microsoft.com/en-us/library/cc995228.aspx
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Pictures are not visable after publishing

Pictures are visable in preview but not after publishing on 2 slides. These slides are set up the same in the timeline as others that are visable. What am I doing wrong?

Yes thanks for your help. In Properties box by visible was checked and the image was stacked correctly and sync was for the duration of the slide but the Fade in and out option was selected and the time settings were identical. So basically the fade in at 0.5 sec was cancelled out by the fade out o.5 sec or set at the same time. Thanks again for your help.
Maureen S. Wilson
Director, Training & Development
Frank D. Lanterman Regional Center
3303 Wilshire Blvd., Ste 700
Los Angeles, CA 90010
WK: 213.383.1300 X 4972
FAX: 213.639.1157
Direct Line: 213.252.4972

Hyperlink is not working after publishing my site!

I can fully activate my newly added page on my iweb site with no problem. I created a button and hyperlinked it to the newly created page. After I publish my site, the new button is NOT clickable. I created a new photo gallery page. I already have 1 photo page so when I clicked on that page, at the very top I am seeing a clickable link that will lead me to my newly created page. THIS IS NOT HOW I HAVE IT SET UP THOUGH! I have a button on my home page that if clicked, it will take you right to the new page! I tested it and it works! I go and publish my site and all the sudden it does NOT work!!! Anybody have a clue why this is?

Turn on DB logging and see what the syntax is that CR tries to send to the Server. You can also enable crlogger ( search for this and you'll find a KBA on how to enable or DB logging component )
First guess is the Date format is wrong, typically is the cause. try removing the date from the SQL and see if that works. Then try to add the selection formula in CR Designer and look at the SQL being generated
Can be specific because you did not mention what DB you are using.
Don

Top Nav buttons not working after publish, but works in app. WHY?

I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
<www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
mini intel Mac OS X (10.4.9)

They all work for me, try clearing your browser cache or using another browser.

Code added to template not working after publishing

We want to track the usage and see who is hitting the pages and where they are hitting them from. A developer at our company who wrote some code for us to be able to do this using an includes file. When we place the code directly into the HTM page using notepad (after publishing) it works fine. When we put the code into the template (.HTT) and then publish it, that code does not appear in the published page.
Is there a setting in the template that would not let us throw a line of code for a server side include in the RoboHelp WYSIWYG editor? Or how do you add such code to the template and have it pull into every page it displays?
Using RH8, publishing WebHelp and not using RH Server.
Thanks.

This question is related to webhelp, not Microsoft HTML Help (CHMs) so I have moved it.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Scrubber works in test; not after "Publish"

Similar Messages

Maybe you are looking for