SCSI CDROM wont boot Windows XP

Hello Everyone,
I really need some help.  I just bought and setup this msi k8n neo2 ultra mobo.
I have two ata 133 40GB drives plugged into the ata 133 ide ports.  I have configured these as a raid stripe with no issue (I've also disabled all sata ports).  The stripe is always detected on boot.
I now would like to install Windows XP and thus the start of my issues.
I have an adaptec 2940 scsi card with a plextor scsi cdrom.
I disable the raid from booting and set the boot other option within the bios.
The scsi bios recognizes the bootable cd and I press 0 to boot it.  I then get an ntldr not found and nothing happens.
Things I have tried:
-disabled raid controller entirely as I thought that the raid controller and the adaptec scsi card may have a conflict
-set floppy to boot first and set boot other device....still nothing
I just do not have any other ideas and would greatly appreciate some help.
Thanks to all who read and reply.
Mike

remove your bios battery and reinsert it after some time ,,if it is a bios problem it will reset to normal ,,i think garbage man needs 2 wait more time for that computer   best of luck,,,let me know ples if it is wrking or not after you tried my idea
bios battery you can find inside your cpu( i guss its a desktop)
<<---------***Click on “Kudos” STAR to say thanks!***    if i helped you to solve  your problem

Similar Messages

  • Brand New Satelite c55 b5353 wont boot Windows 8.1

    hello guys, im a little bit in shambles at the moment due to this problem i have, yesterday im on facebook, browzing my page and put the laptop to sleep mode to move to another room and when i turned it back on it froze on me, i waited for an hour before i had to force press the power button. now it doesn't even boot windows 8 anymore, and just tells me to Reboot and select proper boot device or insert boot media in selected boot device and press a key. 

    Try going through the suggestions in this article. If you can't perform one, skip to the next:
    What can I do if my Windows 8 laptop won't start?
    - Peter

  • Flashing BIOS on a system that wont boot windows.

    Hi, I seem to be the guy all my friends and relative goto to fix their computers and most of the time I can, but I am stuck on this one.
    Computer: HP Pavilion a340n
    Mobo: P4SD-LA (Stingray)
    Ok, so I try and boot up, and it tells me it cant find any drives. So I restart and F1 into the BIOS. According to the BIOS there are  no devices on any Master nor Slave slots available through the IDE ports. I checked all connection (its a no brainer I know, but so many times you goto forums and ask for help and end up spending hours explaining that you are not a moron before you get any real help), all connections are fine power works hdd spins lights come on, but BIOS sees nothing, not the hdd nor the cdrom nor USB. So I I have seen something like this before and it turned out to be a corrupted bios. So I go looking for a BIOs for this thing, and it seems that the only bios flash available if an executable from a working windows operating system.
    Is there a DOS flash somewhere that I am unaware of. And I have looked into extracting the ROM file from the executable, but for some reason I get a returned error 9 at first, but once I worked through that error I come to the BIOS tag being different. I am pulling battery out and unplugged the PS and discharged it via the power button and letting it sit over night in hopes that trying this will be better than to 2 minute method. But if this doesnt work I am at an impass if there is no way to flash. On one hand I would love to build my friend a new computer, but on the other I know how little cash he has right now.
    I am inclined to think this thing is ready for the Garbage Man donation fund, but it would be nice if I could help my buddy out.
    Does anyone know of a fix or work around?

    remove your bios battery and reinsert it after some time ,,if it is a bios problem it will reset to normal ,,i think garbage man needs 2 wait more time for that computer   best of luck,,,let me know ples if it is wrking or not after you tried my idea
    bios battery you can find inside your cpu( i guss its a desktop)
    <<---------***Click on “Kudos” STAR to say thanks!***    if i helped you to solve  your problem

  • H330 wont boot windows 7 from hdd or dvd

    When booting from HDD the pc recgonises a fault in windows and says insert boot disc and repair computer.
    when i change bios to boot from disc freeDos appears asking for time and date. when entered A:\> appears and anything typed is bad filename or bad command.
    Can anyone Help

    hi Bradders16,
       If your system is booting in a free DOS then the HDD is fine, Beacuse the freedos is technically in the HDD.
    One question though.. That WIndows 7 you're trying to bot from is that an installation CD or a HDD with WIndows 7 in it?
    Also you system might be configure on a UEFI / Secureboot settings where you need to change these inside BIOS
    TAP F2 while powering up the computer to boot into BIOS
    Under  
       Exit TAB
                  Look for Os Optimization set it to disabled
       Start up TAB
                  Look for CSM and set it to enabled
                  You should now see Boot mode and Boot priority where you should change those to Legacy and legacy first.
        Security TAB
                  Look for Secure boot and disable it.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Boot Camp wont boot windows 7 install CD

    Hi.
    I have an early 2008 MBP running 10.6.8 and boot camp version 3.0.4. When I try to install Windows 7 x64 my computer reboots (like its supposed to) and then flashes the grey apple and a prohibited sign instead of booting the CD. I know for a fact that my CD is fine. I downloaded the .iso directly from Microsoft and used the .iso burner they reccomended. I have also doubble checked the CD on another computer and it boots without a problem. Frustrated, please help.

    Early 2008 then is a "supported 64-bit" so it isn't that?
    I would assume Microsoft would recommend a Windows program, not Simplyburn. And we know Disk Utilty won't unless burn speed was set to slowest possible.
    Sounds like hardware and you need to disconnect something.
    http://reviews.cnet.com/8301-13727_7-20079593-263/managing-a-prohibitory-sign-at -os-x-bootup/

  • My itunes was working fine untill i tried to download the most current version of itunes. now it wont boot up and has error messages,error7(windows error 126) and MSVCR80.dll

    my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • My Windows 8 wont boot up help me!

    Hi guys needed help right now just yesterday my windows 8 wont boot up and gives me bsod at startup! (look at the pic)
    pic when booting windows 8 in normal mode
    Pic when starting windows in safe mode

    Hi kinghamster678,
    Can we get into the recovey mode ?Have you got a installation media or a recovery disk ?
    Resettting the machine is the last option and we will lose all the data.We can try to boot from the installation media or a recovery disk.Then we can choose the recovery mode to have a repair.
    "Startup Repair " ,"System Restore".
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • T-400 with Windows 7 Wont Boot

    T-400 Thinkpad with Windows 7 64 Bit suddenly wont boot.  No changes were made to the system.  Turned it on got message "Windows was unable to start".  Choose "Start Normally" or "Repair Mode".  Neither option will work.  I got a Windows 7 Home Edition 64 Bit dvd and tried to start Windows from the DVD.  After choosing the prompt to boot from cd/dvd the Windows splash screen shows up with Starting Windows, but will go no further.    Any suggestions?

    Do you have another hard drive that you can try?

  • Edge 531 puter wont boot in Windows 8.1 "auto repair going for over 2 hours"

    PuteR wont boot up windows cant do restore repair anything but watch "repairing disk errors this might take ovewr one hour to complete" that was 2 1/2 hours ago Have a windows 8.1 repair dvd disk and something on a flash drive I made a year ago but cant get puter to boot from them . Cant get windows to bootup. Cant figure out how to procede  Really cvould use some advice/help ps puter was running fine just hours earlieR  AM STUMPED lol Thanks

    ashtastic wrote:
    Now using a linux live usb drive, boot into your favorite brand of linux and run gparted.  You should see your unallocated space sandwiched between your OS X partition (which gparted may or may not formally 'see') and the NTFS Windows partition.  Simply move the Windows partition over to occupy the unallocated space and extend it to the end of drive and you're done. 
    Everything has worked so far, I have freed up about 75GB that is in between OSX and my 8.1 Bootcamp Partition, however I can't for the life of me seem to make a working Linux USB. How can you make a BOOTABLE (from this retina macbook pro) Live CD with Gparted. What tools/ISO did you use?

  • Cant boot from SCSI CDROM

    I am trying to boot to a SCSI DVD ROM drive and the scsi controler sees the bootable disk but i can not boot to it.
    I was able to boot to the SCSI DVD on my abit motherboard whats different now.
    Any Sugestions.
    No selecting Adaptec SCSI CDROM from the F11 Menu does not work.
    UPDATE:   Removed SCSI ZIP from the chain and now it boots to the CD ....

    If your BIOS doesn't support booting from SCSI (the option in Setup might be there, but the code for it might be missing) and there isn't any option ROM available to support it, it is a problem with your card. Try another controller with an option ROM to add support for SCSI boot.

  • Wont boot after windows update

    M y Sateite A305 s6916 wont boot after windows updates tried to install.

    Satellite A305-S6916
    tried .. every option on F8
    Try this. Download a repair disc from here.
       Windows Vista Recovery Environment ISO X64 version (64 bit)
    If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
       Startup Repair: frequently asked questions
    Also try a System Restore.
       What are the system recovery options in Windows Vista?
    -Jerry

  • Osx wont boot after installing windows dev preview.

    Hi. I recently added boot camp and windows 8 to my 2011 mbp 17". Ever since the install my computer wont boot osx unless i run disk utility and repair my mac partition. Then everything runs fine untill i go into windows again and then go back to osx.  Thoughts?

    mcwilliamsc wrote:
    Do i need to make a clone or will my time machine backup work.
    TimeMachine drives are not "hold the option key bootable" like a clone and with Lion there is only a "hold Command r"  Recovery Partition on the same drive your trying to repair.
    So to get a external source to boot Lion, you need to Carbon Copy Cloner Lion to a another new/blank Disk Utility HFS+ Journaled formatted drive. Disconnect your TimeMachine drive before doing anything and don't clone to it or everything will be erased, use another drive.
    Once you have Lion cloned, hold option and boot from the Lion clone and test it out.
    mcwilliamsc wrote:
    I only have one external drive andni dont think a clone will fit.
    Only clone to another drive with no data on it, don't clone to a partition, don't clone to a TimeMachine drive. Disconnect all other drives before cloning so you don't make a mistake.
    mcwilliamsc wrote:
    Also when you say c boot do you mean using a lion install disk as opposed to the install option when you boot into disk utility?
    Your signature says you have 10.6.8, obviously there are no install disks for 10.7, however you can make some by "hold option" and clicking on Purchases in the MacAppStore and redownloading the Lion installer (but don't install)
    Follow these directions to make multiple "hold c" bootable DVD copies of the Lion installer.
    http://eggfreckles.net/notes/burning-a-lion-boot-disc/
    Test the disks out, you can see it's just like the 10.6.8 installer disk with Disk Utility and everything.
    With a Lion DVD one can install Lion AND the Lion Recvoery Partition on a new or totally erased drive, like we are about to do.
    When you clone Lion, it only clones the Lion OS X partition, not the Lion Recovery Partition. So by totally erasing the entire disk and installing Lion from the DVD can the Lion Rececovery Partition and Lion OS X partition be restored and your GPT repaired and your firmware flushed.
    So once you got a Lion clone disconnect it, then c boot from the DVD and erase your ENTIRE Lion internal drive, this means you have to select the drive makers name on the left, HFS+ journaled of course.
    Once that is competed, install Lion fresh, this will create both the Lion OX  partition and the Lion Recovery Partition.
    When that is finished, don't bother booting into the fresh Lion install, simply option boot off the Lion clone and reverse clone onto the Lion OS X partition, this will place back Lion, all your programs and files just like before.
    Then you should be back to normal, your GTP is fixed, EFI is fixed (reboot twice) and you have everything except the Windows bootcamp partition.

  • Random I/O errors (hdd) and failing to boot, Windows not affected

    I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
    Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
    Partition layout:
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 ntfs System Reserved D8B40750B4073094
    ├─sda2 ntfs 00EA107FEA107360
    └─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
    sr0
    All three are primary partitions. Using ext4 yields the exact same result.
    The problem is easy to reproduce:
    Install Windows 7 to first half of HDD and Arch on the second half
    At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
    Windows seems to work just fine
    Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
    [ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000022f000000 aka 8944M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x9FB7C000 000040
    [ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1668MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
    [ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
    [ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
    [ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
    [ 0.000000] On node 0 totalpages: 649053
    [ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 3337 pages used for memmap
    [ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
    [ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
    [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] allocated 5234680 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
    [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
    [ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1630000 - 0xc16be000 ( 568 kB)
    .data : 0xc146853a - 0xc162ec80 (1817 kB)
    .text : 0xc1000000 - 0xc146853a (4513 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1896.408 MHz processor
    [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
    [ 0.000032] pid_max: default: 32768 minimum: 301
    [ 0.000037] ACPI: Core revision 20140424
    [ 0.009582] ACPI: All ACPI Tables successfully acquired
    [ 0.015209] Security Framework initialized
    [ 0.015217] Yama: becoming mindful.
    [ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015472] Initializing cgroup subsys memory
    [ 0.015491] Initializing cgroup subsys devices
    [ 0.015498] Initializing cgroup subsys freezer
    [ 0.015502] Initializing cgroup subsys net_cls
    [ 0.015507] Initializing cgroup subsys blkio
    [ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.015531] CPU: Physical Processor ID: 0
    [ 0.015532] CPU: Processor Core ID: 0
    [ 0.015536] mce: CPU supports 7 MCE banks
    [ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    [ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
    [ 0.016347] ftrace: allocating 19356 entries in 38 pages
    [ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
    [ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
    [ 0.162668] ... version: 0
    [ 0.162670] ... bit width: 48
    [ 0.162671] ... generic registers: 6
    [ 0.162672] ... value mask: 0000ffffffffffff
    [ 0.162674] ... max period: 00007fffffffffff
    [ 0.162675] ... fixed-purpose events: 0
    [ 0.162676] ... event mask: 000000000000003f
    [ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
    [ 0.186179] x86: Booting SMP configuration:
    [ 0.186182] .... node #0, CPUs: #1
    [ 0.218942] Initializing CPU#1
    [ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
    [ 0.226179] #2
    [ 0.258736] Initializing CPU#2
    [ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
    [ 0.266180] #3
    [ 0.276300] Initializing CPU#3
    [ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.279379] x86: Booted up 1 node, 4 CPUs
    [ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
    [ 0.280484] devtmpfs: initialized
    [ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
    [ 0.281973] pinctrl core: initialized pinctrl subsystem
    [ 0.282053] RTC time: 22:28:26, date: 09/21/14
    [ 0.282107] NET: Registered protocol family 16
    [ 0.282225] cpuidle: using governor ladder
    [ 0.282228] cpuidle: using governor menu
    [ 0.282436] ACPI: bus type PCI registered
    [ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.282558] PCI: Using MMCONFIG for extended config space
    [ 0.282559] PCI: Using configuration type 1 for base access
    [ 0.293370] ACPI: Added _OSI(Module Device)
    [ 0.293374] ACPI: Added _OSI(Processor Device)
    [ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.323484] ACPI: Interpreter enabled
    [ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.323519] ACPI: (supports S0 S3 S4 S5)
    [ 0.323522] ACPI: Using IOAPIC for interrupt routing
    [ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
    [ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
    [ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.335971] PCI host bridge to bus 0000:00
    [ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
    [ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
    [ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
    [ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
    [ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
    [ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
    [ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
    [ 0.336266] pci 0000:00:01.0: supports D1 D2
    [ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
    [ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
    [ 0.336417] pci 0000:00:01.1: supports D1 D2
    [ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
    [ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
    [ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
    [ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
    [ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
    [ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
    [ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
    [ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
    [ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
    [ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
    [ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
    [ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
    [ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
    [ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
    [ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
    [ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
    [ 0.340177] pci 0000:00:12.2: supports D1 D2
    [ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
    [ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
    [ 0.343004] pci 0000:00:13.2: supports D1 D2
    [ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
    [ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
    [ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
    [ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
    [ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
    [ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
    [ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
    [ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
    [ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
    [ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
    [ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.344446] pci 0000:01:00.0: supports D1 D2
    [ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
    [ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
    [ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
    [ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
    [ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
    [ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
    [ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.356487] pci 0000:03:00.0: supports D1 D2
    [ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    [ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
    [ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
    [ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    [ 0.363129] pci_bus 0000:00: on NUMA node 0
    [ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
    [ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.367456] vgaarb: loaded
    [ 0.367458] vgaarb: bridge control possible 0000:00:01.0
    [ 0.367505] PCI: Using ACPI for IRQ routing
    [ 0.369255] PCI: pci_cache_line_size set to 64 bytes
    [ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
    [ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
    [ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
    [ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
    [ 0.369516] NetLabel: Initializing
    [ 0.369518] NetLabel: domain hash size = 128
    [ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.369532] NetLabel: unlabeled traffic allowed by default
    [ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.371730] Switched to clocksource hpet
    [ 0.378213] pnp: PnP ACPI init
    [ 0.378231] ACPI: bus type PNP registered
    [ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
    [ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
    [ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
    [ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.378841] system 00:04: [io 0x04d6] has been reserved
    [ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
    [ 0.378846] system 00:04: [io 0x077a] has been reserved
    [ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
    [ 0.378850] system 00:04: [io 0x0c14] has been reserved
    [ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
    [ 0.378855] system 00:04: [io 0x0c6c] has been reserved
    [ 0.378857] system 00:04: [io 0x0c6f] has been reserved
    [ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
    [ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
    [ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
    [ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.382206] pnp: PnP ACPI: found 6 devices
    [ 0.382211] ACPI: bus type PNP unregistered
    [ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
    [ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
    [ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
    [ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
    [ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
    [ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420484] NET: Registered protocol family 2
    [ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.420733] TCP: reno registered
    [ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420798] NET: Registered protocol family 1
    [ 0.420831] pci 0000:00:01.0: Boot video device
    [ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 1.038759] PCI: CLS 64 bytes, default 64
    [ 1.038818] Unpacking initramfs...
    [ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
    [ 1.112753] Simple Boot Flag at 0x44 set to 0x1
    [ 1.113077] perf: AMD NB counters detected
    [ 1.113122] LVT offset 0 assigned for vector 0x400
    [ 1.113138] perf: AMD IBS detected (0x000000ff)
    [ 1.113149] apm: BIOS not found.
    [ 1.113200] Scanning for low memory corruption every 60 seconds
    [ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.116388] zbud: loaded
    [ 1.116669] VFS: Disk quotas dquot_6.5.2
    [ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.116962] msgmni has been set to 1707
    [ 1.117034] Key type big_key registered
    [ 1.117325] bounce: pool size: 64 pages
    [ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.117448] io scheduler noop registered
    [ 1.117452] io scheduler deadline registered
    [ 1.117524] io scheduler cfq registered (default)
    [ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.118114] GHES: HEST is not enabled!
    [ 1.118129] isapnp: Scanning for PnP cards...
    [ 1.513691] isapnp: No Plug & Play device found
    [ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.514746] rtc_cmos 00:01: RTC can wake from S4
    [ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.515246] TCP: cubic registered
    [ 1.515386] NET: Registered protocol family 10
    [ 1.515657] NET: Registered protocol family 17
    [ 1.516096] Using IPI No-Shortcut mode
    [ 1.516269] registered taskstats version 1
    [ 1.516866] Magic number: 14:856:502
    [ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
    [ 1.517032] PM: Hibernation image not present or could not be loaded.
    [ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
    [ 1.517350] Write protecting the kernel text: 4516k
    [ 1.517388] Write protecting the kernel read-only data: 1332k
    [ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [ 1.529660] systemd-udevd[57]: starting version 216
    [ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
    [ 1.568048] ACPI: bus type USB registered
    [ 1.568103] usbcore: registered new interface driver usbfs
    [ 1.568141] usbcore: registered new interface driver hub
    [ 1.568537] SCSI subsystem initialized
    [ 1.574578] usbcore: registered new device driver usb
    [ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.594746] ehci-pci: EHCI PCI platform driver
    [ 1.594935] QUIRK: Enable AMD PLL fix
    [ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.595002] ehci-pci 0000:00:12.2: debug port 1
    [ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
    [ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.595830] ohci-pci: OHCI PCI platform driver
    [ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.602284] libata version 3.00 loaded.
    [ 1.602306] hub 1-0:1.0: USB hub found
    [ 1.602325] hub 1-0:1.0: 5 ports detected
    [ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.602912] ehci-pci 0000:00:13.2: debug port 1
    [ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
    [ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 1.612308] hub 2-0:1.0: USB hub found
    [ 1.612317] hub 2-0:1.0: 5 ports detected
    [ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
    [ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
    [ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
    [ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
    [ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
    [ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
    [ 1.613374] hub 3-0:1.0: USB hub found
    [ 1.613388] hub 3-0:1.0: 2 ports detected
    [ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
    [ 1.616754] hub 4-0:1.0: USB hub found
    [ 1.616768] hub 4-0:1.0: 2 ports detected
    [ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
    [ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
    [ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.673072] hub 5-0:1.0: USB hub found
    [ 1.673098] hub 5-0:1.0: 5 ports detected
    [ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
    [ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
    [ 1.729803] hub 6-0:1.0: USB hub found
    [ 1.729831] hub 6-0:1.0: 5 ports detected
    [ 1.730166] ahci 0000:00:11.0: version 3.0
    [ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
    [ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.731131] scsi0 : ahci
    [ 1.731321] scsi1 : ahci
    [ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
    [ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
    [ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
    [ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
    [ 2.218438] ata2.00: configured for UDMA/133
    [ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
    [ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.318651] ata1.00: configured for UDMA/133
    [ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
    [ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
    [ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.338885] sda: sda1 sda2 sda3
    [ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
    [ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 2.438989] ata1.00: irq_stat 0x40000008
    [ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
    [ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 2.439127] ata1.00: status: { DRDY ERR }
    [ 2.439166] ata1.00: error: { ICRC ABRT }
    [ 2.439207] ata1: hard resetting link
    [ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.586950] usbcore: registered new interface driver usbhid
    [ 2.586953] usbhid: USB HID core driver
    [ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
    [ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
    [ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
    [ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
    [ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
    [ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
    [ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.039928] ata1.00: configured for UDMA/133
    [ 3.039955] ata1: EH complete
    [ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
    [ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
    [ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
    [ 3.089128] ata1.00: irq_stat 0x40000008
    [ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
    res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.089265] ata1.00: status: { DRDY ERR }
    [ 3.089304] ata1.00: error: { ICRC ABRT }
    [ 3.089346] ata1: hard resetting link
    [ 3.115583] Switched to clocksource tsc
    [ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.694602] ata1.00: configured for UDMA/133
    [ 3.694621] ata1: EH complete
    [ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
    [ 3.809168] ata1.00: irq_stat 0x40000008
    [ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
    res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.809305] ata1.00: status: { DRDY ERR }
    [ 3.809343] ata1.00: error: { ICRC ABRT }
    [ 3.809385] ata1: hard resetting link
    [ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4.404835] ata1.00: configured for UDMA/133
    [ 4.404858] ata1: EH complete
    [ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
    [ 4.453760] ata1.00: irq_stat 0x40000008
    [ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
    res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
    [ 4.453894] ata1.00: status: { DRDY ERR }
    [ 4.453932] ata1.00: error: { UNC }
    [ 4.637639] ata1.00: configured for UDMA/133
    [ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
    [ 4.637691] sd 0:0:0:0: [sda]
    [ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
    [ 4.637695] sd 0:0:0:0: [sda]
    [ 4.637697] Sense Key : 0x3 [current] [descriptor]
    [ 4.637700] Descriptor sense data with sense descriptors (in hex):
    [ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 4.637710] 00 00 09 b8
    [ 4.637714] sd 0:0:0:0: [sda]
    [ 4.637716] ASC=0x11 ASCQ=0x4
    [ 4.637718] sd 0:0:0:0: [sda] CDB:
    [ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
    [ 4.637727] end_request: I/O error, dev sda, sector 2488
    [ 4.637786] Buffer I/O error on device sda1, logical block 55
    [ 4.637826] Buffer I/O error on device sda1, logical block 56
    [ 4.637866] Buffer I/O error on device sda1, logical block 57
    [ 4.637905] Buffer I/O error on device sda1, logical block 58
    [ 4.637945] Buffer I/O error on device sda1, logical block 59
    [ 4.637984] Buffer I/O error on device sda1, logical block 60
    [ 4.638024] Buffer I/O error on device sda1, logical block 61
    [ 4.638063] Buffer I/O error on device sda1, logical block 62
    [ 4.638105] Buffer I/O error on device sda1, logical block 63
    [ 4.638188] ata1: EH complete
    [ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
    [ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
    [ 4.879364] ata1.00: irq_stat 0x40000008
    [ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
    res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 4.879502] ata1.00: status: { DRDY ERR }
    [ 4.879540] ata1.00: error: { ICRC ABRT }
    [ 4.879583] ata1: hard resetting link
    [ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 5.469816] ata1.00: configured for UDMA/133
    [ 5.469845] ata1: EH complete
    [ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 5.582859] ata1.00: irq_stat 0x40000008
    [ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
    [ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 5.582997] ata1.00: status: { DRDY ERR }
    [ 5.583036] ata1.00: error: { ICRC ABRT }
    [ 5.583078] ata1: hard resetting link
    [ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.191135] ata1.00: configured for UDMA/133
    [ 6.191166] ata1: EH complete
    [ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
    [ 6.256073] ata1.00: irq_stat 0x40000008
    [ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.256212] ata1.00: status: { DRDY ERR }
    [ 6.256250] ata1.00: error: { ICRC ABRT }
    [ 6.256292] ata1: hard resetting link
    [ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.845773] ata1.00: configured for UDMA/133
    [ 6.845806] ata1: EH complete
    [ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
    [ 6.986223] ata1.00: irq_stat 0x40000008
    [ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
    res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.986360] ata1.00: status: { DRDY ERR }
    [ 6.986399] ata1.00: error: { ICRC ABRT }
    [ 6.986440] ata1: hard resetting link
    [ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 7.578097] ata1.00: configured for UDMA/133
    [ 7.578124] ata1: EH complete
    [ 7.587216] random: nonblocking pool is initialized
    [ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
    [ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
    [ 7.602850] ata1.00: irq_stat 0x40000008
    [ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
    [ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 7.602982] ata1.00: status: { DRDY ERR }
    [ 7.603020] ata1.00: error: { ICRC ABRT }
    [ 7.603061] ata1: hard resetting link
    [ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.188490] ata1.00: configured for UDMA/133
    [ 8.188517] ata1: EH complete
    [ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
    [ 8.216361] ata1.00: irq_stat 0x40000008
    [ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
    res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.216500] ata1.00: status: { DRDY ERR }
    [ 8.216539] ata1.00: error: { ICRC ABRT }
    [ 8.216581] ata1: hard resetting link
    [ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.809726] ata1.00: configured for UDMA/133
    [ 8.809758] ata1: EH complete
    [ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
    [ 8.836295] ata1.00: irq_stat 0x40000008
    [ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
    res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.836429] ata1.00: status: { DRDY ERR }
    [ 8.836467] ata1.00: error: { ICRC ABRT }
    [ 8.836507] ata1: hard resetting link
    [ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 9.430994] ata1.00: configured for UDMA/133
    [ 9.431018] ata1: EH complete
    [ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 9.837542] ata1.00: irq_stat 0x40000008
    [ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
    [ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 9.837680] ata1.00: status: { DRDY ERR }
    [ 9.837719] ata1.00: error: { ICRC ABRT }
    [ 9.837761] ata1: hard resetting link
    [ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 10.515900] ata1.00: configured for UDMA/133
    [ 10.515972] sd 0:0:0:0: [sda]
    [ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
    [ 10.515978] sd 0:0:0:0: [sda]
    [ 10.515979] Sense Key : 0xb [current] [descriptor]
    [ 10.515983] Descriptor sense data with sense descriptors (in hex):
    [ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 10.515992] 5e 89 08 20
    [ 10.515997] sd 0:0:0:0: [sda]
    [ 10.515998] ASC=0x47 ASCQ=0x0
    [ 10.516001] sd 0:0:0:0: [sda] CDB:
    [ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
    [ 10.516010] end_request: I/O error, dev sda, sector 1586038816
    [ 10.516148] ata1: EH complete
    [ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
    [ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
    [ 10.529786] ata1.00: irq_stat 0x40000008
    [ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
    [ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
    res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 10.529924] ata1.00: status: { DRDY ERR }
    [ 10.529962] ata1.00: error: { ICRC ABRT }
    [ 10.530004] ata1: hard resetting link
    [ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.139673] ata1.00: configured for UDMA/100
    [ 11.139723] sd 0:0:0:0: [sda]
    [ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.139728] sd 0:0:0:0: [sda]
    [ 11.139730] Sense Key : 0xb [current] [descriptor]
    [ 11.139733] Descriptor sense data with sense descriptors (in hex):
    [ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.139743] 5e 89 08 d4
    [ 11.139747] sd 0:0:0:0: [sda]
    [ 11.139749] ASC=0x47 ASCQ=0x0
    [ 11.139751] sd 0:0:0:0: [sda] CDB:
    [ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
    [ 11.139761] end_request: I/O error, dev sda, sector 1586038992
    [ 11.139889] ata1: EH complete
    [ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
    [ 11.153169] ata1.00: irq_stat 0x40000008
    [ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.153306] ata1.00: status: { DRDY ERR }
    [ 11.153345] ata1.00: error: { ICRC ABRT }
    [ 11.153386] ata1: hard resetting link
    [ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.749884] ata1.00: configured for UDMA/100
    [ 11.749918] sd 0:0:0:0: [sda]
    [ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.749923] sd 0:0:0:0: [sda]
    [ 11.749925] Sense Key : 0xb [current] [descriptor]
    [ 11.749928] Descriptor sense data with sense descriptors (in hex):
    [ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.749938] 5e 89 08 28
    [ 11.749942] sd 0:0:0:0: [sda]
    [ 11.749944] ASC=0x47 ASCQ=0x0
    [ 11.749946] sd 0:0:0:0: [sda] CDB:
    [ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
    [ 11.749956] end_request: I/O error, dev sda, sector 1586038824
    [ 11.750093] ata1: EH complete
    [ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 11.763206] ata1.00: irq_stat 0x40000008
    [ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.763343] ata1.00: status: { DRDY ERR }
    [ 11.763382] ata1.00: error: { ICRC ABRT }
    [ 11.763424] ata1: hard resetting link
    [ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.360321] ata1.00: configured for UDMA/100
    [ 12.360370] sd 0:0:0:0: [sda]
    [ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.360375] sd 0:0:0:0: [sda]
    [ 12.360377] Sense Key : 0xb [current] [descriptor]
    [ 12.360380] Descriptor sense data with sense descriptors (in hex):
    [ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.360390] 5e 89 08 c8
    [ 12.360394] sd 0:0:0:0: [sda]
    [ 12.360395] ASC=0x47 ASCQ=0x0
    [ 12.360398] sd 0:0:0:0: [sda] CDB:
    [ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
    [ 12.360407] end_request: I/O error, dev sda, sector 1586038984
    [ 12.360543] ata1: EH complete
    [ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.370005] ata1.00: irq_stat 0x40000008
    [ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.370143] ata1.00: status: { DRDY ERR }
    [ 12.370182] ata1.00: error: { ICRC ABRT }
    [ 12.370224] ata1: hard resetting link
    [ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.959379] ata1.00: configured for UDMA/100
    [ 12.959426] sd 0:0:0:0: [sda]
    [ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.959432] sd 0:0:0:0: [sda]
    [ 12.959433] Sense Key : 0xb [current] [descriptor]
    [ 12.959437] Descriptor sense data with sense descriptors (in hex):
    [ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.959447] 63 89 08 3a
    [ 12.959462] sd 0:0:0:0: [sda]
    [ 12.959464] ASC=0x47 ASCQ=0x0
    [ 12.959466] sd 0:0:0:0: [sda] CDB:
    [ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
    [ 12.959476] end_request: I/O error, dev sda, sector 1669924920
    [ 12.959616] ata1: EH complete
    [ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
    [ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.973247] ata1.00: irq_stat 0x40000008
    [ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.973384] ata1.00: status: { DRDY ERR }
    [ 12.973423] ata1.00: error: { ICRC ABRT }
    [ 12.973464] ata1: hard resetting link
    [ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 13.569691] ata1.00: configured for UDMA/33
    [ 13.569750] sd 0:0:0:0: [sda]
    [ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
    [ 13.569755] sd 0:0:0:0: [sda]
    [ 13.569757] Sense Key : 0xb [current] [descriptor]
    [ 13.569761] Descriptor sense data with sense descriptors (in hex):
    [ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 13.569771] 5e 89 08 c0
    [ 13.569775] sd 0:0:0:0: [sda]
    [ 13.569777] ASC=0x47 ASCQ=0x0
    [ 13.569779] sd 0:0:0:0: [sda] CDB:
    [ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
    [ 13.569789] end_request: I/O error, dev sda, sector 1586038976
    [ 13.569933] ata1: EH complete
    [ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
    [ 13.583360] ata1.00: irq_stat 0x40000008
    [ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
    [ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 13.585478] ata1.00: status: { DRDY ERR }
    [ 13.585516] ata1.00: error: { ICRC ABRT }
    [ 13.585558] ata1: hard resetting link
    [ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.180020] ata1.00: configured for UDMA/33
    [ 14.180069] sd 0:0:0:0: [sda]
    [ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.180074] sd 0:0:0:0: [sda]
    [ 14.180076] Sense Key : 0xb [current] [descriptor]
    [ 14.180079] Descriptor sense data with sense descriptors (in hex):
    [ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.180089] 63 89 08 30
    [ 14.180094] sd 0:0:0:0: [sda]
    [ 14.180095] ASC=0x47 ASCQ=0x0
    [ 14.180098] sd 0:0:0:0: [sda] CDB:
    [ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
    [ 14.180108] end_request: I/O error, dev sda, sector 1669924912
    [ 14.180245] ata1: EH complete
    [ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
    [ 14.190153] ata1.00: irq_stat 0x40000008
    [ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
    res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.190290] ata1.00: status: { DRDY ERR }
    [ 14.190328] ata1.00: error: { ICRC ABRT }
    [ 14.190371] ata1: hard resetting link
    [ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.779168] ata1.00: configured for UDMA/33
    [ 14.779214] sd 0:0:0:0: [sda]
    [ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.779218] sd 0:0:0:0: [sda]
    [ 14.779220] Sense Key : 0xb [current] [descriptor]
    [ 14.779223] Descriptor sense data with sense descriptors (in hex):
    [ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.779233] 63 89 08 80
    [ 14.779237] sd 0:0:0:0: [sda]
    [ 14.779239] ASC=0x47 ASCQ=0x0
    [ 14.779241] sd 0:0:0:0: [sda] CDB:
    [ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
    [ 14.779251] end_request: I/O error, dev sda, sector 1669924976
    [ 14.779391] ata1: EH complete
    [ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
    [ 14.793513] ata1.00: irq_stat 0x40000008
    [ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.793651] ata1.00: status: { DRDY ERR }
    [ 14.793690] ata1.00: error: { ICRC ABRT }
    [ 14.793733] ata1: hard resetting link
    [ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.378218] ata1.00: configured for UDMA/33
    [ 15.378240] sd 0:0:0:0: [sda]
    [ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
    [ 15.378245] sd 0:0:0:0: [sda]
    [ 15.378247] Sense Key : 0xb [current] [descriptor]
    [ 15.378250] Descriptor sense data with sense descriptors (in hex):
    [ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 15.378260] 63 89 08 28
    [ 15.378264] sd 0:0:0:0: [sda]
    [ 15.378266] ASC=0x47 ASCQ=0x0
    [ 15.378268] sd 0:0:0:0: [sda] CDB:
    [ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
    [ 15.378277] end_request: I/O error, dev sda, sector 1669924904
    [ 15.378427] ata1: EH complete
    [ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
    [ 15.390148] ata1.00: irq_stat 0x40000008
    [ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
    res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.390285] ata1.00: status: { DRDY ERR }
    [ 15.390324] ata1.00: error: { ICRC ABRT }
    [ 15.390366] ata1: hard resetting link
    [ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.977410] ata1.00: configured for UDMA/33
    [ 15.977500] ata1: EH complete
    [ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
    [ 15.986916] ata1.00: irq_stat 0x40000008
    [ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.987054] ata1.00: status: { DRDY ERR }
    [ 15.987093] ata1.00: error: { ICRC ABRT }
    [ 15.987135] ata1: hard resetting link
    [ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 16.576437] ata1.00: configured for UDMA/33
    [ 16.576509] sd 0:0:0:0: [sda]
    [ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
    [ 16.576514] sd 0:0:0:0: [sda]
    [ 16.576516] Sense Key : 0xb [current] [descriptor]
    [ 16.576519] Descriptor sense data with sense descriptors (in hex):
    [ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 16.576529] 63 89 08 20
    [ 16.576533] sd 0:0:0:0: [sda]
    [ 16.576534] ASC=0x47 ASCQ=0x0
    [ 16.576537] sd 0:0:0:0: [sda] CDB:
    [ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
    [ 16.576546] end_request: I/O error, dev sda, sector 1669924896
    [ 16.576642] ata1: EH complete
    [ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
    [ 16.586847] ata1.00: irq_stat 0x40000008
    [ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
    [ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 16.586980] ata1.00: status: { DRDY ERR }
    [ 16.587018] ata1.00: error: { ICRC ABRT }
    [ 16.587058] ata1: hard resetting link
    [ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 17.175907] ata1.00: configured for UDMA/33
    [ 17.175963] sd 0:0:0:0: [sda]
    [ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
    [ 17.175968] sd 0:0:0:0: [sda]
    [ 17.175970] Sense Key : 0xb [current] [descriptor]
    [ 17.175973] Descriptor sense data with sense descriptors (in hex):
    [ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 17.175983] 5e 89 08 54
    [ 17.175987] sd

    I have only Arch installed, 64 bit, UEFI boot.
    The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
    Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
    res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
    Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
    Sep 24 06:13:59 kernel: ata6: hard resetting link
    Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:13:59 kernel: 00 00 0e 87
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
    Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
    Sep 24 06:13:59 kernel: ata6: EH complete
    Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
    Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
    res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6: hard resetting link
    Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
    Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    and so on... It somehow booted, but now journalctl says:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
    while the Error hasn't occured yet.
    I think I wil take the emergency procedure, and start backing up my files and system ...
    I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.

  • [VHD][BOOT][UEFI] Boot Windows 8 From a VHD Drive On a GPT Disk Using UEFI BIOS

    I had been dual booting two copies of Windows 8 prior to getting a new rig without any issues. Once I installed Windows 8.1 I can no longer boot a VHD from the GPT partitioned drive. 
    My PC specifications 
    Intel i7-4770k
    ASUS SABERTOOTH Z87
    16GB KINGSTON HYPERX BEAST DUAL-DDR3 2400MHz
    2GB NVIDIA GEFORCE GTX 660 Ti 
    120GB INTEL 520 SSD 
    4TB WD CAVIAR BLACK WD2002FAEX
    4TB WD CAVIAR BLACK WD2002FAEX (two way mirror = storage spaces)
    15x BLU-RAY Writer Drive
    CORSAIR 750W PRO HX750-80
    Corsair H60 Hydro Series High Performance CPU Cooler
    10/100/1000 GIGABIT LAN PORT 
    Windows 8.1 Pro x64 
    So I basically copied my existing VHD to the new data drive and created the relevant BCD entry, when I chose to boot from the VHD I am presented with an error saying Windows cannot boot and to choose another OS or the troubleshooting options (I’ll post the
    exact error later as I am at work at the moment). 
    I can boot the VHD inside Hyper-V without any issues, it just wont boot natively. I also created a brand new Windows 8.1 VHD and still the same thing happens. Once I created a new VHD I used “bcdboot j:\windows /s j:” to insert the attached VHD into the BCD
    store. 
    So existing or brand new VHD’s don’t seem to work for me, any advice would be appreciated.   
    Mike Park

    I posted this issue on Neowin and someone kindly pointed out the answer, it's to do with storage spaces: 
    http://www.neowin.net/forum/topic/1191873-native-boot-vhdx-from-second-drive/#entry596152197
    Quote
    What types of drives can I use with Storage Spaces?
    You can use commodity drives attached via Serial-Attached SCSI (SAS), Serial ATA (SATA), or USB. Storage layers that abstract the physical disks are not compatible with Storage Spaces. This includes VHDs and pass-through disks in a virtual machine, and storage
    subsystems that layer a RAID implementation on top of the physical disks. iSCSI and Fibre Channel controllers are not supported by Storage Spaces.
    From: http://social.techne...stions-faq.aspx 
    Mike Park

  • How to undo boot camp, wont boot from install disk in dvd drive

    A few months ago I went through trying out boot camp and parallels. Now, I think something is messed up. I dont need either right now, so I just want to wipe out the whole system, repartition the drive, and restore to a blank new install of os x 10.5 leopard.
    But when I put in the install disk, it wont boot up off it.
    I tried holding down the c key while powering it up, and it just cycles through: hearing the drive whirl, a bling sound, and then repeating it again while the screen is blank. Finally, I held down the click button on the touch pad so it would eject the install disk.
    Maybe this will help someone recognize part of the problem. Ever since messing around with boot camp and parallels, my machine wont "reboot". To reboot it, I tell it to reboot, then it hangs on the star like screen, then I have to hold the power button down, then if I do nothing, it tries to boot, but ends up in a dos looking screen saying no bootable device. So when I power it back up, I hold down the alt key, and then I have one choice: the hard drive. I pick that and it boots up ok.
    So... I thought, well, maybe the boot camp is still messed up; maybe I should undo boot camp. When I start the boot camp assistant, there is only a "partition" and "back" button; nothing to "restore" the hard drive to just one partition.
    What can I do? I want to wipe the drive and install a fresh install from my install disk.

    Forgot to specify:
    Im using an older Unibody Macbook (back when they were not all macbook pro's) 2008ish with Snow leopard 1.6.8
    The thread you linked me to, Eric, shows the guy 'Niganit' with the eXACT SAME PROBLEM as me! He seems to have found out the problem but I dont see his resolve.
    I just dont have the option to install windows 7 in any other form that a cd
    a picture;

Maybe you are looking for

  • What are all the tables used for this report ? please reply

    hai i have practcing reports, so any one give me the name of the tables used for the below report <b>Created report for invoice details, shipping details and partner function.</b> thanks in advance. by ashok

  • Java is a Partially Object-Oriented Programming (True/False)

    Hi everybody, Many of them saying that Java is not purely Object-Oriented Programming. I am very much confusing on that, so please help me to confirm that "Java is a Partially Object-Oriented Programming Language".

  • Abnormal Shut-Down Sequence After Power Supply Replacement ???

    Before the repair, there was a spinning wheel on the blue screen before the shut-down. But now the machine just cuts the power completely the moment the blue screen appears. Do you guys think that there is something to do with the new power supply ?

  • How to invoke my dll in java?

    hi: I use Jawin Type Browser generate two java files(DES_in_VBA.java,_DES_in_VBA.java),but I do not know how to use this two java files,beacuse this is my first to use Jawin. Can you tell me Where the two files should to be place,and how to use it go

  • Flash won't open automatically with webpages

    When i open a website, i.e. MLB.com or CNN.com, i have to go to the menu bar at the top of the computer and click, "Safari", "Click to Flash", "Load flash for all pages" for every page i visit. THese pages used to load automatically. What do I need t