SCSI errors in a Sun/Storagetek environment

Hallo everyone,
i experienced SCSI error messages in the /var/adm/messages file.
The system is composed by a Sun server V240 connected to a StorageTek L700 library through two SCSI cables.
Apparently in a random way i receive some SCSI errors that make it impossible to complete I/O operation on a tape media (IBM LTO2).
Here is a sample of the message detail:
Apr 11 15:12:01 azmvipa scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4/st@0,0 (st0):
Apr 11 15:12:01 azmvipa      Error for Command: write file mark Error Level: Fatal
Apr 11 15:12:01 azmvipa scsi: [ID 107833 kern.notice]      Requested Block: 1 Error Block: 1
Apr 11 15:12:01 azmvipa scsi: [ID 107833 kern.notice]      Vendor: IBM Serial Number:
Apr 11 15:12:01 azmvipa scsi: [ID 107833 kern.notice]      Sense Key: Media Error
Apr 11 15:12:01 azmvipa scsi: [ID 107833 kern.notice]      ASC: 0xc (write error), ASCQ: 0x0, FRU: 0x6
Does anyone have any idea about which could be the source for this problem, or if there is any way to know if it is generated by the server or the storage device?
Thank you
-- Andrea

Hi
did you find any solution for this.....
I too have same issue with v240 server hardware, plenty of errors when running cfgadm command ..........
thanks a lot
regd
vijay

Similar Messages

SUN Blade 2000 giving FATAL SCSI Error while booting from CDROM

Hi,
SUN Blade 2000 system giving "FATAL SCSI Error at Script address 110 SCSI parity Error Arbitration Complete" while trying to boot from CDROM.
Thanks in advance.
Bye
vijay

Hi,
SUN Blade 2000 system giving "FATAL SCSI Error at Script address 110 SCSI parity Error Arbitration Complete" while trying to boot from CDROM.
Thanks in advance.
Bye
vijay

Scsi errors on V240

Hi friends
My sun server v240 conncted with storage array.
whenever, I run scsi related commands like cfgadm or probescsi to configure something I'm getting plenty of scsi errors....
genunix: [ID 408822 kern.info] NOTICE: glm0: fault detected in device; service still available
scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2 (glm0):
can you please update me, is there any patches required or which hardware has the exact problem............

This does not appear to be an actual storage issue.
It's likely to be a GLM patch issue.
If that is the only device that produces such error messages,
it could be an issue with a single individual disk drive.
As per Spectrum Infodoc 21216
http://sunsolve.sun.com/handbook_pub/Systems/Example/documents/21216.html
the device path of /pci@1c,600000/scsi@2 for "glm0" is your boot drive.
Bring the system down, remove the disk, and reseat it back into place.
Log into Sunsolve and see if there are any
firmware patches for that brand/model of disk.
Patch updates for the GLM driver are usually a part of the kernel update.
Patch your system with the full Recommended Patch Cluster,
which brings the entire V240's OS up to current capabilities.

ESXi 4.0 with sun storagetek 2500 array server is getting crashed

Hi all,
I have configured ESXi 4.0 in an IBM server followed by creating virtual host in that server. The server was working fine until I connect the server with storage array.
My setup looks like this.
IBM Server installed with ESXi 4.0 (linux version) followed by virtual host creation. the virtual host is Windows 2008 - 64 bit. Once all this setup were made, I have installed a software called CAM module in this server. This module is to manage my Sun storagetek 2500 array family. Suddenly i see my ESXi server (licensed one) is getting crashed. Following is the error message displayed.
Vmware ESXI release build_164009 x86_64
#PF Exception(14) in world 5354:sfcbd in 0X418028840C99 addr 0X410008ebdd84
Press escape to enter local debugger
I got a work around from one of the forum for this similar problem as "increase the swap size may solve this". but i tried that also , but still the issue persists. Swap size is set as twice of the RAM (my ram is with 4 GB,2X dual core AMD processor and HDD capacity is 80GB)
can anyone help me on this.
With regards,
Sri

Hello,
if it's that urgent, why do you post in a user-to-user forum instead of getting in touch with tech support of Vmware, IBM, Microsoft and maybe Sun ?
Michael

Using Xserve with Sun StorageTek Disk Array

Hi
Is it possible to connect an Xserve with a Fibre Channel Card installed to a Sun StorageTek 6140 Disk Array?
I don't see any devices in /dev. Is the Xserve limited to the Xserve RAID or can it be used with other storage solutions? Do I need to purchase Xsan to do this (e.g. partition, format and mount a device from the Sun disk array)?
Xserve (Intel) Mac OS X (10.4.9)

Oh my, I should retire...
When I read that page I somehow confused all that X* stuff... :o/
I was wondering if it is possible to connect other
storage solutions than the Xserve RAID (like the Sun
StorageTek ones) directly (or via switch) to an
Xserve (the pizza box server )
Of course you can connect any DAS storage device that presents itself as a raw device on the device channel in use (fc, scsi, ...).
But reading the specs on that special Sun Raid I'd say that it falls into another category: SAN storage. And therefore it needs OS support/drivers which seem to be available only for Solaris, Linux and Win.
How exactly do I partition, format and mount the
virtual device under Mac OS X Server?
DiscUtility.app? In CLI: diskutil
I want to try this procedure:
Connect the Sun Diskarray to the Xserve via the
copper cables.
(Perhaps reboot the Xserve)
Partition with pdisk
mkfs.xfs (or something similar mac os like)
/dev/sda(x)
mount /dev/sda1 /Users/
diskutil
see man diskutil
But as said I guess you can't access this kind of SAN storage device.
Am I completely wrong? It's the procedure in Linux,
so it can't be very different in BSD (say: Mac OS
X)...
Same procedure as every year: install the driver then drink.
-Ralph

SUN StorageTek 6140 w/ Linux Automatic Volume Transfer (AVT)

Hi2all
Im connecting a SUN StorageTek 6140 to Linux RHEL witjh qlogic cards/drivers
Using the latest drivers now 8.02.23
I had several I/O errors at fdisk -l ( 4mins time ) and boot was 15mins
Now with a change in StorageTek 6140 settings, enabling Linux
Automatic Volume Transfer (AVT) is ok
fdisk -l is < 1sec, boot normal
Can you explain this? is this the correct way to set it up?
Much Thanks
Jose

It really depends which failover driver you're using / wantint to use.
I'd suggest downloading and using the RDAC driver from [http://www.sun.com/download/index.jsp?cat=Hardware%20Drivers&tab=3&subcat=Storage]
It sounds like the RHEL box was trying to probe volumes on boot and fdisk but since the initiator type wasn't correct, it would timeout eventually on each volume on one of the paths.

Galaxy and SCSI Error - ASC[0x30], ASCQ[0x00] incompatible medium installed

hello,
Windows 2003
Commvault Galaxy 6.1
Storagetek SL500
PROBLEM:
The cleaning jobs do not work, I get the Galaxy messages:
The SCSI device reported an error while executing the SCSI operation
SCSI Operation: Move Media From Slot To Drive.
SCSI Error - ASC[0x30], ASCQ[0x00] incompatible medium installed
The cleaning tapes and barcodes are LTO3 compatibles
The last firmware and drivers are installed.
Any idea ?
Thanks and regards

hello,
Windows 2003
Commvault Galaxy 6.1
Storagetek SL500
PROBLEM:
The cleaning jobs do not work, I get the Galaxy messages:
The SCSI device reported an error while executing the SCSI operation
SCSI Operation: Move Media From Slot To Drive.
SCSI Error - ASC[0x30], ASCQ[0x00] incompatible medium installed
The cleaning tapes and barcodes are LTO3 compatibles
The last firmware and drivers are installed.
Any idea ?
Thanks and regards

Error in JMS receiver adapter: "Error creating initial context with environment"

Hello,
I have some trouble with a JMS receiver adapter (access to JMS-provider with JNDI).
The message in adapter monitoring is:
A channel error occurred. Detailed error (if any) :
com.sap.aii.adapter.jms.api.connector.ConnectorException: Fatal Error looking up connection factoryJMSQueueConnectionFactory, for profile: ConnectionProfile of channel: CC_JMS_RCV_XLIMI00001on node: 503473150 having object id: 5b424f2f79b6350ca636ab35d528cfdd:
ConnectorException: Error creating initial context with environment: java.naming.provider.url=wcsefdev.example.com:9064; java.naming.factory.initial=com.ibm.websphere.naming.WsnInitialContextFactory; for profile: ConnectionProfile of channel:
CC_JMS_RCV_XLIMI00001on node: 503473150 having object id: 5b424f2f79b6350ca636ab35d528cfdd: javax.naming.NoInitialContextException:
Cannot instantiate class: com.ibm.websphere.naming.WsnInitialContextFactory<br> at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory
(JndiConnectorImpl.java:152)<br> ....
Message processing failed. Cause:
com.sap.aii.adapter.jms.core.fsm.DFA$InvalidTransitionException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_RCV_XLIMI00001:5b424f2f79b6350ca636ab35d528cfdd
The third party assured me that the specified JNDI parameters are right and everything is configured on their site, so it should work...
Might there be a problem with the JMS drivers?
Regards,
Marcus

Hi Marcus,
Have a look at below thread
Connecting to PI 7.11 JMS Queue from other PI 7.11 Server

Build error :package com.sun.javadoc does not exist

Question from a Turing machine expert who is new to Java.
Trying to run a sample program from Richardson's book "Java JDK 5 Edition" Chapter 1.
In Netbeans 5.5 receive build error :package com.sun.javadoc does not exist
for "import com.sun.javadoc.*;"
Believe missing classes are in tools.jar in C:\Sun\SDKee5SDK\jdk\lib
How do I define this to Netbeans and/or JDK?
Using java_ee_sdk-5_01
and netbeans-5_5-windows downloads.
Platform is XP.
Netbeans has been updated to date.
Appreciate.

sony_tj wrote:
D:\Xyz.java:22: package com.sun.javadoc does not exist
import com.sun.javadoc.*;After getting this error, I have set my classpath to C:\Program Files\Java\jdk1.5.0_03\lib\tools.jar. But still the error persists. Could anyone please tell me how do I solve this problem.You have failed in setting your classpath in that case.

Error creating initial context with environment

Hi,
Currently we are working on a scenarios, where we need to integrate XI and webmethods using JMS.
It was working fine. But recently they have restarted the webmethods server. After that we re getting an error message like,
In Adapter Monitoring:
Channel error occurred; detailed error description: com.sap.aii.adapter.jms.api.connector.ConnectorException: Error creating initial context with environment: {java.naming.provider.url=server:port, java.naming.factory.initial=com.sap.engine.services.jndi.InitialContextFactoryImpl, java.naming.security.principal=XYZ, java.naming.security.credentials=ABC}for profile: ConnectionProfile of channel: CC_RCV_JMS_INon node: 3010950 having object id: ABCXYZ: NamingException: Error getting the server-side naming service functionality during getInitialContext operation.
at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createInitialContext(JndiConnectorImpl.java:66)
In RWB
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: No transition found from state: STARTING, on event: process_commence for DFA: C_RCV_JMS_IN:e4413a5265a436459e271d5e0dd4859b
Can one please tell me what the problem is?
Thanks in advance.
Regards,
Prasad Babu.

Hi,
Check this link looks like same problem
Re: file to JMS(for MQ series)
Thanks
Vikranth

Error converting Message: 'sun.io.MalformedInputException';nested exception

Hi All,
        I am using a File to mail scenario, My test file is getting picked up, but is not reflecting in SXMB_MONI and in runtime workbench it is showing like this
Retry 14. Message initiation failed: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException.
Can anybody help me out? In the module tab I am using it is an UTF-8, I have checked using US-ASCII, UTF-16, It is showing me the same error.
Edited by: uday kumar on Mar 10, 2009 9:32 AM

Hi Uday,
Please see this explaination from help.sap.com. Hope it will help you to understand the problem.
File Type
Specify the document data type.
○       Binary
○       Text
Under File Encoding, specify a code page.
The default setting is to use the system code page that is specific to the configuration of the installed operating system. The file content is converted to the UTF-8 code page before it is sent.
Permitted values for the code page are the existing Charsets of the Java runtime. According to the SUN specification for the Java runtime, at least the following standard character sets must be supported:
US-ASCII
Seven-bit ASCII, also known as ISO646-US, or Basic Latin block of the Unicode character set
ISO-8859-1
ISO character set for Western European languages (Latin Alphabet No. 1), also known as ISO-LATIN-1
UTF-8
8-bit Unicode character format
UTF-16BE
16-bit Unicode character format, big-endian byte order
UTF-16LE
16-bit Unicode character format, little-endian byte order
UTF-16
16-bit Unicode character format, byte order
Check which other character sets are supported in the documentation for your Java runtime implementation.
XML text documents generally contain their own code page description and should be treated as Binary data type.
go with the Binary File type option if don't require any content encoding in your scenario.
regards
Ashwin
Edited by: ashwin dhakne on Mar 10, 2009 3:22 PM

I have this error trying to setup the environment : ORA-32101

i have this error trying to setup the environment :
the execution :
[]-pedro:/home/pedro/modelo_v4>./occiteste
inicio do programa
antes do env _environment
Can’t set the environment: Error while trying to retrieve text for error ORA-32101
[]-pedro:/home/pedro/modelo_v4>
here is a piece of the code :
Model.h
#pragma once
#include <iostream>
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
#include <string>
#include <occi.h>
using namespace oracle::occi;
using namespace std;
private:
int ret;
Environment* env;
Model .cpp
Modelo::Modelo(void)
try
env = Environment::createEnvironment(Environment::DEFAULT);
catch (SQLException ea)
cerr << "Error : " << ea.what();
ret = 1;
[]-pedro:/home/pedro/modelo_v3>ldd occiteste
libocci.so.10.1 => /opt/users/ora10g/lib/libocci.so.10.1
libclntsh.so.10.1 => /opt/users/ora10g/lib/libclntsh.so.10.1
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libstd_v2.so.1 => /usr/lib/hpux64/libstd_v2.so.1
libCsup.so.1 => /usr/lib/hpux64/libCsup.so.1
libc.so.1 => /usr/lib/hpux64/libc.so.1
libnnz10.so => /opt/users/ora10g/lib/libnnz10.so
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libuca.so.1 => /usr/lib/hpux64/libuca.so.1
[]-pedro:/home/pedro/modelo_v3>
thanks

yes , the OBJECT gives the same result
the platform is HP-UX 64 bits :
/opt/aCC/bin/aCC DD64    -AA -DOCCI_NO_WSTRING=1 DD64 -D_RWSTD_MULTI_THREAD -I/opt/users/ora10g/rdbms/demo -I/opt/users/ora10g/rdbms/public -I/opt/users/ora10g/plsql/public -I/opt/users/ora10g/network/public -DHPUX -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE -DSLTS_ENABLE -DSS_64BIT_SERVER -DBIT64 -DMACHINE64 -DORAIA64 -DHPUX_IA64 -c Main_Program.cpp
/opt/aCC/bin/aCC DD64    -AA -DOCCI_NO_WSTRING=1 DD64 -D_RWSTD_MULTI_THREAD -I/opt/users/ora10g/rdbms/demo -I/opt/users/ora10g/rdbms/public -I/opt/users/ora10g/plsql/public -I/opt/users/ora10g/network/public -DHPUX -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE -DSLTS_ENABLE -DSS_64BIT_SERVER -DBIT64 -DMACHINE64 -DORAIA64 -DHPUX_IA64 -c Modelo.cpp
/opt/aCC/bin/aCC +DD64 -o occiteste Main_Program.o Modelo.o -L/opt/users/ora10g/lib -locci -lclntsh   `cat /opt/users/ora10g/lib/sysliblist` -lm
[]-pedro:/home/pedro/modelo_v4>ls -la
DEFAULT is used for creating an Environment object; it has no thread safety or object support.
OBJECT is for creating an Environment object; it uses object features.
SHARED is for creating an Environment object.
NO_USERCALLBACKS is for creating an Environment object; it does not support user callbacks.
THREADED_MUTEXED is a thread safe mode for creating an Environment object, mutexed internally by OCCI.
THREADED_UNMUTEXED is a thread safe mode for creating an Environment object; the client is responsible for mutexing.
EVENTS supports registration for event notification used in Oracle Streams Advanced Queuing.
USE_LDAP supports registration with LDAP.

TimesTen database in Sun Cluster environment

Hi,
Currently we have our application together with the TimesTen database installed at the customer on two different nodes (running on Sun Solaris 10). The second node acts as a backup to provide failover functionality, although right now only manual failover is supported.
We are now looking into a hot-standby / high availability solution using Sun Cluster software. As understood from the documentation, applications can be 'plugged-in' to the Sun Cluster using Agents to monitor the application. Sun Cluster Agents should be already available for certain applications such as:
# MySQL
# Oracle 9i, 10g (HA and RAC)
# Oracle 9iAS Application Server
# PostgreSQL
(See http://www.sun.com/software/solaris/cluster/faq.jsp#q_19)
Our question is whether Sun Cluster Agents are already (freely) available for TimesTen? If so, where to find them. If not, should we write a specific Agent separately for TimesTen or handle database problems from the application.
Does someone have any experience using TimesTen in a Sun Cluster environment?
Thanks in advance!

Yes, we use 2-way replication, but we don't use cache connect. The replication is created like this on both servers:
create replication MYDB.REPSCHEME
element SERVER01_DS datastore
master MYDB on "SERVER01_REP"
transmit nondurable
subscriber MYDB on "SERVER02_REP"
element SERVER02_DS datastore
master MYDB on "SERVER02_REP"
transmit nondurable
subscriber MYDB on "SERVER01_REP"
store MYDB on "SERVER01_REP"
port 16004
failthreshold 500
store MYDB on "SERVER02_REP"
port 16004
failthreshold 500
The application runs on SERVER01 and is standby on SERVER02. If an invalid state is detected in the application, the application on SERVER01 is stopped and the application on SERVER02 is started.
In addition to this, we want to fail over if the database on the SERVER01 is in invalid state. What should we have monitored by the Clustering Agent to detect an invalid state in TT?

Hardware checking in Sun Cluster environment

Hi! I wonder how I can check my hardware in Sun Cluster environment... I consider to use SunVTS, but it is not supported software to use with SC. Is there any other way to test HW which works under SC instead of OBP and POST testing?.. Or maybe there are some ways to use SunVTS in some cases, for instance after booting node in non-cluster mode or something else... I need to put HW to long-term stress testing but at that moment I can think only about SunVTS...

Thanks for your answer! Are there any restrictions to hardware classes or I can test any device in my server?.. There were some opinions in [this thread|http://forums.sun.com/thread.jspa?forumID=842&threadID=5418126] that I shouldn't put stress test on disk drives...

Fatal SCSI Error

Hello,
I've a problem with my Ultra 10.
"Fatal SCSI error at script address 100 Illegal instruction"
What can i do????
Thanks

Unplug any PCI SCSI adapters you have installed to narrow it down. There is no SCSI in an Ultra 10, by default.

SCSI errors in a Sun/Storagetek environment

Similar Messages

Maybe you are looking for