SCSI Transport Failed
Hello Guys, I'm trying to figure out if my harddrive is going bad in my system. I'm seeing a lot of SCSI transport error messages in the /var/adm/messages file. This only happens when our backups are running at night. We back up all our servers through the firewall using veritas's netbackup. Can someone help me sift thought this information in the messages file and let me know what all this means. Thanks
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 Cmd (0x2d37890) dump for Target 0 Lun 0:
Dec 6 18:53:22 cp-hqc2 Cmd (0x2d37890) dump for Target 0 Lun 0:
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 cdb=[ 0x2a 0x0 0x0 0x60 0xba 0x74 0x0 0x0 0x2 0x0 ]
Dec 6 18:53:22 cp-hqc2 cdb=[ 0x2a 0x0 0x0 0x60 0xba 0x74 0x0 0x0 0x2 0x0 ]
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 pkt_flags=0x4000 pkt_statistics=0x60 pkt_state=0x7
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 pkt_scbp=0x0 cmd_flags=0x1860
Dec 6 18:53:22 cp-hqc2 pkt_flags=0x4000 pkt_statistics=0x60 pkt_state=0x7
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 Disconnected tagged cmd(s) (1) timeout for Target 0.0
Dec 6 18:53:22 cp-hqc2 scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 genunix: [ID 408822 kern.info] NOTICE: glm0: fault detected in device; service still available
Dec 6 18:53:22 cp-hqc2 pkt_scbp=0x0 cmd_flags=0x1860
Dec 6 18:53:22 cp-hqc2 genunix: [ID 611667 kern.info] NOTICE: glm0: Disconnected tagged cmd(s) (1) timeout for Target 0.0
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 Disconnected tagged cmd(s) (1) timeout for Target 0.0
Dec 6 18:53:22 cp-hqc2 glm: [ID 401478 kern.warning] WARNING: ID[SUNWpd.glm.cmd_timeout.6018]
Dec 6 18:53:22 cp-hqc2 genunix: [ID 408822 kern.info] NOTICE: glm0: fault detected in device; service still available
Dec 6 18:53:22 cp-hqc2 genunix: [ID 611667 kern.info] NOTICE: glm0: Disconnected tagged cmd(s) (1) timeout for Target 0.0
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 glm: [ID 401478 kern.warning] WARNING: ID[SUNWpd.glm.cmd_timeout.6018]
Dec 6 18:53:22 cp-hqc2 got SCSI bus reset
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3 (glm0):
Dec 6 18:53:22 cp-hqc2 genunix: [ID 408822 kern.info] NOTICE: glm0: fault detected in device; service still available
Dec 6 18:53:22 cp-hqc2 genunix: [ID 611667 kern.info] NOTICE: glm0: got SCSI bus reset
Dec 6 18:53:22 cp-hqc2 got SCSI bus reset
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3/sd@0,0 (sd0):
Dec 6 18:53:22 cp-hqc2 genunix: [ID 408822 kern.info] NOTICE: glm0: fault detected in device; service still available
Dec 6 18:53:22 cp-hqc2 genunix: [ID 611667 kern.info] NOTICE: glm0: got SCSI bus reset
Dec 6 18:53:22 cp-hqc2 SCSI transport failed: reason 'reset': retrying command
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3/sd@0,0 (sd0):
Dec 6 18:53:22 cp-hqc2 SCSI transport failed: reason 'reset': retrying command
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3/sd@0,0 (sd0):
Dec 6 18:53:22 cp-hqc2 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@3/sd@0,0 (sd0):
Dec 6 18:53:22 cp-hqc2 SCSI transport failed: reason 'timeout': retrying command
Dec 6 18:53:22 cp-hqc2 SCSI transport failed: reason 'timeout': retrying command
Hello, data is not being backed up locally. This server is our firewall. We have multiple dmz zones on our firewall. One of our dmz's host's the veritas master server which backs up other web servers in other dmz zones. When the backups kick off at night, these messages appear in the /var/adm/messages file. Does this mean the firewall cannot handle the load of traffic??
Similar Messages
-
Solaris 10 SCSI transport failed reason 'tran err' on host level
Hello,
we are frequently getting below errors on host, can any one please help to solve this issue?
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 1 20:41:09 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 1 20:41:09 host SCSI transport failed: reason 'tran_err': retrying command
Mar 2 00:30:14 host fctl: [ID 517869 kern.warning] WARNING: fp(3)::GPN_ID for D_ID=2e1400 failed
Mar 2 00:30:14 host fctl: [ID 517869 kern.warning] WARNING: fp(3)::N_x Port with D_ID=2e1400, PWWN=50060e80164ed673 disappeared from fabric
Mar 2 00:30:16 host fctl: [ID 517869 kern.warning] WARNING: fp(3)::N_x Port with D_ID=2e1400, PWWN=50060e80164ed673 reappeared in fabric
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 2 00:30:18 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 2 00:30:18 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] Requested Block: 367501 Error Block: 367501
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B0
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 00:30:36 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,5 (ssd112):
Mar 2 00:30:36 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] Requested Block: 201152 Error Block: 201152
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B5
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 00:31:40 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,2 (ssd115):
Mar 2 00:31:40 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] Requested Block: 10063136 Error Block: 10063136
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B2
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 00:32:31 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,4 (ssd113):
Mar 2 00:32:31 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] Requested Block: 71274 Error Block: 71274
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B4
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 03:41:29 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,3 (ssd114):
Mar 2 03:41:29 host Error for Command: read(10) Error Level: Retryable
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] Requested Block: 88112 Error Block: 88112
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B3
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 06:00:00 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,1 (ssd116):
Mar 2 06:00:00 host Error for Command: read(10) Error Level: Retryable
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] Requested Block: 202608 Error Block: 202608
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B1
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 17:02:01 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 2 17:02:01 host SCSI transport failed: reason 'timeout': retrying command
Mar 4 02:07:11 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130304020711-1
Mar 4 02:07:21 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130304020711-2
Mar 5 02:06:47 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130305020647-1
Mar 5 02:06:57 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130305020647-2
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 5 10:02:55 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,2 (ssd115):
Mar 5 10:02:55 host SCSI transport failed: reason 'timeout': retrying command
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 6 02:06:38 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130306020638-1
Mar 6 02:06:48 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130306020638-2
Mar 6 05:00:00 host explorer: [ID 702911 daemon.notice] Explorer started
Mar 6 05:02:49 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[18043] core dumped: /ecmp/ecm/log/cores/luxadm.host.18043.core
Mar 6 05:02:50 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[18046] core dumped: /ecmp/ecm/log/cores/luxadm.host.18046.core
Mar 6 05:02:54 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[18331] core dumped: /ecmp/ecm/log/cores/luxadm.host.18331.core
Mar 6 05:03:46 host explorer: [ID 702911 daemon.notice] Explorer finished
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 6 12:27:02 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[28834] core dumped: /ecmp/ecm/log/cores/luxadm.host.28834.core
Mar 6 12:27:33 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[28839] core dumped: /ecmp/ecm/log/cores/luxadm.host.28839.core
Mar 6 15:24:11 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5006] core dumped: /ecmp/ecm/log/cores/luxadm.host.5006.core
Mar 6 15:30:52 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5699] core dumped: /ecmp/ecm/log/cores/luxadm.host.5699.core
Mar 6 15:31:57 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5975] core dumped: /ecmp/ecm/log/cores/luxadm.host.5975.core
Mar 6 15:32:39 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5987] core dumped: /ecmp/ecm/log/cores/luxadm.host.5987.core
Mar 6 15:36:16 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[6274] core dumped: /ecmp/ecm/log/cores/luxadm.host.6274.core
Mar 6 15:36:38 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[6286] core dumped: /ecmp/ecm/log/cores/luxadm.host.6286.core
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 6 18:23:44 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 6 18:23:44 host SCSI transport failed: reason 'tran_err': retrying command
Mar 7 01:43:47 host xntpd[735]: [ID 774427 daemon.notice] time reset (step) 0.139069 s
Mar 7 02:07:10 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130307020710-1
Mar 7 02:07:20 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130307020710-2
Mar 7 02:07:58 host xntpd[735]: [ID 774427 daemon.notice] time reset (step) 0.152342 s
Mar 7 07:23:29 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[24350] core dumped: /ecmp/ecm/log/cores/luxadm.host.24350.coreHello,
we are frequently getting below errors on host, can any one please help to solve this issue?
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 1 04:41:49 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 04:41:49 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 1 16:51:30 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 1 16:51:30 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 1 20:41:09 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 1 20:41:09 host SCSI transport failed: reason 'tran_err': retrying command
Mar 2 00:30:14 host fctl: [ID 517869 kern.warning] WARNING: fp(3)::GPN_ID for D_ID=2e1400 failed
Mar 2 00:30:14 host fctl: [ID 517869 kern.warning] WARNING: fp(3)::N_x Port with D_ID=2e1400, PWWN=50060e80164ed673 disappeared from fabric
Mar 2 00:30:16 host fctl: [ID 517869 kern.warning] WARNING: fp(3)::N_x Port with D_ID=2e1400, PWWN=50060e80164ed673 reappeared in fabric
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 2 00:30:16 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 2 00:30:16 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 2 00:30:18 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 2 00:30:18 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] Requested Block: 367501 Error Block: 367501
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B0
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:30:18 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 00:30:36 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,5 (ssd112):
Mar 2 00:30:36 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] Requested Block: 201152 Error Block: 201152
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B5
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:30:36 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 00:31:40 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,2 (ssd115):
Mar 2 00:31:40 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] Requested Block: 10063136 Error Block: 10063136
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B2
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:31:40 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 00:32:31 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,4 (ssd113):
Mar 2 00:32:31 host Error for Command: write(10) Error Level: Retryable
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] Requested Block: 71274 Error Block: 71274
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B4
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 00:32:31 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 03:41:29 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,3 (ssd114):
Mar 2 03:41:29 host Error for Command: read(10) Error Level: Retryable
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] Requested Block: 88112 Error Block: 88112
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B3
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 03:41:29 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 06:00:00 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,1 (ssd116):
Mar 2 06:00:00 host Error for Command: read(10) Error Level: Retryable
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] Requested Block: 202608 Error Block: 202608
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 50 14ED622B1
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] Sense Key: Unit_Attention
Mar 2 06:00:00 host scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
Mar 2 17:02:01 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 2 17:02:01 host SCSI transport failed: reason 'timeout': retrying command
Mar 4 02:07:11 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130304020711-1
Mar 4 02:07:21 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130304020711-2
Mar 5 02:06:47 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130305020647-1
Mar 5 02:06:57 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130305020647-2
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 5 08:02:48 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 08:02:48 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 5 10:02:55 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,2 (ssd115):
Mar 5 10:02:55 host SCSI transport failed: reason 'timeout': retrying command
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 5 14:09:40 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 5 14:09:40 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 6 02:06:38 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130306020638-1
Mar 6 02:06:48 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130306020638-2
Mar 6 05:00:00 host explorer: [ID 702911 daemon.notice] Explorer started
Mar 6 05:02:49 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[18043] core dumped: /ecmp/ecm/log/cores/luxadm.host.18043.core
Mar 6 05:02:50 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[18046] core dumped: /ecmp/ecm/log/cores/luxadm.host.18046.core
Mar 6 05:02:54 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[18331] core dumped: /ecmp/ecm/log/cores/luxadm.host.18331.core
Mar 6 05:03:46 host explorer: [ID 702911 daemon.notice] Explorer finished
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 6 06:01:22 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 06:01:22 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 6 12:27:02 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[28834] core dumped: /ecmp/ecm/log/cores/luxadm.host.28834.core
Mar 6 12:27:33 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[28839] core dumped: /ecmp/ecm/log/cores/luxadm.host.28839.core
Mar 6 15:24:11 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5006] core dumped: /ecmp/ecm/log/cores/luxadm.host.5006.core
Mar 6 15:30:52 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5699] core dumped: /ecmp/ecm/log/cores/luxadm.host.5699.core
Mar 6 15:31:57 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5975] core dumped: /ecmp/ecm/log/cores/luxadm.host.5975.core
Mar 6 15:32:39 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[5987] core dumped: /ecmp/ecm/log/cores/luxadm.host.5987.core
Mar 6 15:36:16 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[6274] core dumped: /ecmp/ecm/log/cores/luxadm.host.6274.core
Mar 6 15:36:38 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[6286] core dumped: /ecmp/ecm/log/cores/luxadm.host.6286.core
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=5 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=4 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=3 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=2 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=1 ffffffff
Mar 6 16:18:20 host scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp3):
Mar 6 16:18:20 host ndi_devi_online: failed for scsa,00.bfcp: target=2e1400 lun=0 ffffffff
Mar 6 18:23:44 host scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@1/fp@0,0/ssd@w50060e80164ed673,0 (ssd117):
Mar 6 18:23:44 host SCSI transport failed: reason 'tran_err': retrying command
Mar 7 01:43:47 host xntpd[735]: [ID 774427 daemon.notice] time reset (step) 0.139069 s
Mar 7 02:07:10 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130307020710-1
Mar 7 02:07:20 host buxus: [ID 702911 daemon.notice] SYSLOG check 20130307020710-2
Mar 7 02:07:58 host xntpd[735]: [ID 774427 daemon.notice] time reset (step) 0.152342 s
Mar 7 07:23:29 host genunix: [ID 603404 kern.notice] NOTICE: core_log: luxadm[24350] core dumped: /ecmp/ecm/log/cores/luxadm.host.24350.core -
Hi,
I am getting SCSI transport failed error on my Solaris 10 servers. iostat is reporting Hard & Transport errors.
I am able to access to lun and able to write data to it without any problem.
Questions:
1. what does this error mean?
2. could this impact the performance?
3. possible fix?
/scsi_vhci/ssd@g60a98000486e5a75576f4e4949586c42 (ssd0):
Jun 1 20:59:20 APP001 SCSI transport failed: reason 'tran_err': retrying command
Jun 1 21:00:41 APP001 scsi: WARNING: /scsi_vhci/ssd@g60a98000486e5a75576f4e4949586c42 (ssd0):
Jun 1 21:00:41 APP001 SCSI transport failed: reason 'timeout': retrying command
Jun 1 21:00:41 APP001 scsi: WARNING: /scsi_vhci/ssd@g60a98000486e5a75576f4e4949586c42 (ssd0):
Jun 1 21:00:41 APP001 SCSI transport failed: reason 'tran_err': retrying command
=========================
root@STFEMAPAPP001 # iostat -En
c1t0d0 Soft Errors: 2 Hard Errors: 0 Transport Errors: 0
Vendor: LSILOGIC Product: Logical Volume Revision: 3000 Serial No:
Size: 146.56GB <146561286144 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0
c0t0d0 Soft Errors: 3 Hard Errors: 0 Transport Errors: 0
Vendor: TSSTcorp Product: CD/DVDW TS-T632A Revision: SR03 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0
c6t60A98000486E5A75576F4E4949586C42d0 Soft Errors: 2 Hard Errors: 648 Transport Errors: 659
Vendor: NETAPP Product: LUN Revision: 0.2 Serial No:
Size: 107.36GB <107357405184 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis:
Help appreciated.
Thanks.it means that when the sun tried to send or recive data to the drive it could not. this could be cable or scsi controler. but the most likely proublem is your drive. i would get the data off and try a new drive be fore it fails.
-
Dell R610 "SCSI transport failed: reason 'reset': retrying command"
MY DELL R610 Server run 3 ~ 5 hours ,will display the message and the server is die.
Jul 1 00:48:50 JSxwmGS scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2940@1c/pci1028,1f10@0 (mpt0):
Jul 1 00:48:50 JSxwmGS Disconnected command timeout for Target 0
Jul 1 00:48:51 JSxwmGS scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2940@1c/pci1028,1f10@0/sd@0,0 (sd1):
Jul 1 00:48:51 JSxwmGS SCSI transport failed: reason 'reset': retrying command
Jul 1 00:50:01 JSxwmGS scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2940@1c/pci1028,1f10@0 (mpt0):
Jul 1 00:50:01 JSxwmGS Disconnected command timeout for Target 0
Jul 1 00:52:02 JSxwmGS scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2940@1c/pci1028,1f10@0 (mpt0):
Jul 1 00:52:02 JSxwmGS Disconnected command timeout for Target 0Use the same server install Centos5.4 , run the same java program on that , It is running ok.
use solaris 10 zfs file system ,it also have the question. -
SCSI transport failed: reason 'aborted': retrying command
The /var/adm/messages it show as below:
does anyone knows what is this error message and how i can fix it??
dsu1b:/var/adm ROOT > more messages
Jul 30 05:53:04 dsu1b xntpd[313]: time reset (step) 0.134397 s
Aug 1 08:34:08 dsu1b xntpd[313]: time reset (step) 0.134628 s
Aug 1 10:48:25 dsu1b unix: LOMlite PSU 1 Input B restored
Aug 1 10:48:28 dsu1b unix: LOMlite PSU 1 Input B failed
Aug 2 11:15:42 dsu1b unix: WARNING: /pci@1f,2000/SUNW,ifp@1/ssd@w50020f230000878f,1 (ssd13):
Aug 2 11:15:42 dsu1b SCSI transport failed: reason 'aborted': retrying command
Aug 2 11:15:42 dsu1b
Aug 2 11:16:06 dsu1b unix: WARNING: /pci@1f,2000/SUNW,ifp@1/ssd@w50020f230000878f,0 (ssd12):
Aug 2 11:16:06 dsu1b SCSI transport failed: reason 'aborted': retrying command
Aug 2 11:16:06 dsu1b
Aug 2 11:16:14 dsu1b unix: WARNING: /pci@1f,2000/SUNW,ifp@1/ssd@w50020f230000878f,3 (ssd15):
Aug 2 11:16:14 dsu1b SCSI transport failed: reason 'aborted': retrying command
Aug 2 11:16:14 dsu1b
Aug 2 11:16:14 dsu1b unix: WARNING: /pci@1f,2000/SUNW,ifp@1/ssd@w50020f230000878f,0 (ssd12):
Aug 2 11:16:14 dsu1b SCSI transport failed: reason 'aborted': retrying command
Aug 2 11:16:14 dsu1b
Aug 2 11:35:33 dsu1b explorer: Explorer started
Aug 2 11:37:35 dsu1b unix: pseudo-device: lockstat0
Aug 2 11:37:35 dsu1b unix: lockstat0 is /pseudo/lockstat@0
Aug 2 11:38:32 dsu1b unix: /pci@1f,4000/scsi@3/st@4,0 (st4):
Aug 2 11:38:32 dsu1b <HP DDS-3 4mm DAT >
Aug 2 11:38:32 dsu1b unix: st4 at glm0:
Aug 2 11:38:32 dsu1b unix: target 4 lun 0
Aug 2 11:38:32 dsu1b unix: st4 is /pci@1f,4000/scsi@3/st@4,0
Aug 2 11:40:54 dsu1b explorer: Explorer finished
Aug 2 21:56:16 dsu1b xntpd[313]: time reset (step) 0.168668 s
Aug 4 13:04:00 dsu1b xntpd[313]: time reset (step) 0.144823 s
dsu1b:/var/adm ROOT >Hmm, if this was the first and last occourance of this message its probably safe to ignore it. If you have had it many times its about time that you start trouble shooting your SCSI chain; checking the cables, if possible move the disks to another controller/box etc.
The message basicly tells you that the system tried to communicate with the disks, but for some reason the command it sent to the disks was aborted.
7/M. -
Install from SCSI CD fails: ERROR: boot device didn't show up after 30
I have a x86 based server w/SCSI HD and DVD drive.
Install fails with following.
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201108
ERROR: boot device didn't show up after 30 seconds
Falling back to interactive prompt
You can try to fix the problem manually, logout when you are finished
sh: can't access tty; job contro turned off
[ramfs /]#
I hooked up a IDE DVD drive and using same CD installs OK. Then, once installed, I switch my DVD back to SCSI that failed the install, and guess what? Arch booted from my HD now recognizes the SCSI DVD drive, I can mount it and so on. Looks to me like the install kernel doesn't support my SCSI DVD drive but the installed kernel does.
I need the Arch install to work from the SCSI DVD drive on my system. I'm trying to develop an Arch distro for my particular system, which there are about a dozen of in the field, they all have SCSI DVD and no IDE drives. Will I have to add a SCSI driver to the boot kernel? Or is my problem something else?
I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid).
I do a:
"[ramfs /]# lsmod | grep sr_mod"
sr_mod 14951 0
cdrom 36329 1 sr_mod
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_transport_spi
[ramfs /]# lsmod | grep scsi
mptscsih 20040 1 mptspi
mptbase 63459 2 mptspi,pmtscsih
scsi_transport_spi 20059 1 mptspi
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_stransport_spiscrath "I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid)."
Should be: I notice there is no /dev/disk/by-label (there is a /dev/disk/by-id by-path and by-uuid). -
SSRS: Failure sending mail: The transport failed to connect to the server.
I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
JessicaThank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>
<!-- <Add Key="ProcessTimeout" Value="150" /> -->
<!-- <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
<!-- <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
<!-- <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
<!-- <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
<Application>
<Name>ReportServerWebService</Name>
<VirtualDirectory>ReportServer</VirtualDirectory>
<URLs>
<URL>
<UrlString>http://+:80</UrlString>
<AccountSid>S-1-5-19</AccountSid>
<AccountName>NT Authority\LocalService</AccountName>
</URL>
</URLs>
</Application>
<Application>
<Name>ReportManager</Name>
<VirtualDirectory>Reports</VirtualDirectory>
<URLs>
<URL>
<UrlString>http://+:80</UrlString>
<AccountSid>S-1-5-19</AccountSid>
<AccountName>NT Authority\LocalService</AccountName>
</URL>
</URLs>
</Application>
</URLReservations>
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate/>
<RSWindowsNTLM/>
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
<IsSchedulingService>True</IsSchedulingService>
<IsNotificationService>True</IsNotificationService>
<IsEventService>True</IsEventService>
<PollingInterval>10</PollingInterval>
<WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
<MemorySafetyMargin>80</MemorySafetyMargin>
<MemoryThreshold>90</MemoryThreshold>
<RecycleTime>720</RecycleTime>
<MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
<MaxQueueThreads>0</MaxQueueThreads>
<UrlRoot>http://abraham/Reports</UrlRoot>
<UnattendedExecutionAccount>
<UserName></UserName>
<Password></Password>
<Domain></Domain>
</UnattendedExecutionAccount>
<PolicyLevel>rssrvpolicy.config</PolicyLevel>
<IsWebServiceEnabled>True</IsWebServiceEnabled>
<IsReportManagerEnabled>True</IsReportManagerEnabled>
<FileShareStorageLocation>
<Path>
</Path>
</FileShareStorageLocation>
</Service>
<UI>
<ReportServerUrl>
</ReportServerUrl>
<PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
<Delivery>
<Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
<MaxRetries>3</MaxRetries>
<SecondsBeforeRetry>900</SecondsBeforeRetry>
<Configuration>
<FileShareConfiguration>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
</FileShareConfiguration>
</Configuration>
</Extension>
<Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
<MaxRetries>3</MaxRetries>
<SecondsBeforeRetry>900</SecondsBeforeRetry>
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>192.168.11.210</SMTPServer>
<SMTPServerPort></SMTPServerPort>
<SMTPAccountName>
</SMTPAccountName>
<SMTPConnectionTimeout>
</SMTPConnectionTimeout>
<SMTPServerPickupDirectory>
</SMTPServerPickupDirectory>
<SMTPUseSSL>
</SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>
</SMTPAuthenticate>
<From>[email protected]</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats>
</PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName>
</DefaultHostName>
<PermittedHosts>
</PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
</Extension>
<Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
<MaxRetries>3</MaxRetries>
<SecondsBeforeRetry>900</SecondsBeforeRetry>
<Configuration>
<DocumentLibraryConfiguration>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
</DocumentLibraryConfiguration>
</Configuration>
</Extension>
<Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
</Delivery>
<DeliveryUI>
<Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
<DefaultDeliveryExtension>True</DefaultDeliveryExtension>
<Configuration>
<RSEmailDPConfiguration>
<DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
</RSEmailDPConfiguration>
</Configuration>
</Extension>
<Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
</DeliveryUI>
<Render>
<Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
<Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
<Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
<Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
<Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
<Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
<Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
<Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
<Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
<Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
<Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
</Render>
<Data>
<Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
<Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
<Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
</Data>
<SemanticQuery>
<Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>False</EnableMathOpCasting>
</Configuration>
</Extension>
<Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>False</EnableMathOpCasting>
</Configuration>
</Extension>
<Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>False</EnableMathOpCasting>
</Configuration>
</Extension>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>True</EnableMathOpCasting>
<DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
<EnableUnistr>False</EnableUnistr>
<DisableTSTruncation>False</DisableTSTruncation>
</Configuration>
</Extension>
<Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
<Configuration>
<EnableMathOpCasting>True</EnableMathOpCasting>
<ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
</Configuration>
</Extension>
<Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
</SemanticQuery>
<ModelGeneration>
<Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
<Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
</ModelGeneration>
<Security>
<Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
</Security>
<Authentication>
<Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
</Authentication>
<EventProcessing>
<Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
<Event>
<Type>ReportHistorySnapshotCreated</Type>
</Event>
</Extension>
<Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
<Event>
<Type>TimedSubscription</Type>
</Event>
</Extension>
<Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
<Event>
<Type>RefreshCache</Type>
</Event>
</Extension>
<Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
<Event>
<Type>SnapshotUpdated</Type>
</Event>
</Extension>
</EventProcessing>
</Extensions>
<MapTileServerConfiguration>
<MaxConnections>2</MaxConnections>
<Timeout>10</Timeout>
<AppID>(Default)</AppID>
<CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration> -
When transporting multiproviders and cubes transport failed.
HI Experts,
When transporting cubes and multiproviders in a request the transport failed with return code 8.
The described below as:
Start of the after-import method RS_CUBE_AFTER_IMPORT for obje
Error/warning in dict. activator, detailed log > Detail
/BIC/L101078 (specify a primary key)
Table /BIC/L101078 could not be activated
Return code..............: 8
DDIC Object TABL /BIC/L101078 has not been activated
Error when activating InfoCube 101078
Error/warning in dict. activator, detailed log > Detail
/BIC/L101077 (specify a primary key)
Table /BIC/L101077 could not be activated
Return code..............: 8
DDIC Object TABL /BIC/L101077 has not been activated
Error when activating InfoCube 101077
Error/warning in dict. activator, detailed log > Detail
/BIC/L101078 (specify a primary key)
Table /BIC/L101078 could not be activated
Return code..............: 8
DDIC Object TABL /BIC/L101078 has not been activated
Error when activating InfoCube 101078
Error/warning in dict. activator, detailed log > Detail
/BIC/L101077 (specify a primary key)
Table /BIC/L101077 could not be activated
Return code..............: 8
DDIC Object TABL /BIC/L101077 has not been activated
Error when activating InfoCube 101077
Error/warning in dict. activator, detailed log > Detail
/BIC/L101078 (specify a primary key)
Table /BIC/L101078 could not be activated
Please let us know if anyone has come across similar kind of issue.
Regards,
Monalisa MohantyIssue seems to be with the aggregates maintained in the cube.
Is your aggregates were properly maintained in your Dev system when you have collected it in your transport?
Check the same and also use overwrite option when you are trying to import the transport in the target systems.
If the aggregates are properly maintained then check the import once again and see if that works fine with the overwrite mode. If not then you need to collect your objects again in a new transport.
Hope this helps.
Murali -
Hi Experts,
My Transports through Solution Manager is failing in Production PI. Transports are imported, deployed successfully in Test and Regression environments and working fine. Transport requests are of type Workbench and we are attaching '.tpz' files as Non abap objects. All contain ESR objects, no ID components. Import and Check version steps are good but failing at Deployment step in Production PI.
Please find the log which I can see in SE10. All the transports failed with the same below error description.
CTS Import Service - Version 0.94 04.04.2008
==============================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://ABC2159161:50000
Start import with id:4E8B872CA9F100F2E10080000A32109F
DeployProxy (patch level:0) called with followingparameters:
Deployable(0)
Deployable-Type:1
Deployable-Id:4E6E38F506B601AAE10080000A321063
Deployable-TransportContainerId:DI1K900677
Deployable-ContentLocator:/usr/sap/trans/data/DI1K900677/XI7_1
>>>63.tpz
Property(0)
Property-key:TARGETSYSTEMID Property-value:PI1
Begin CommunicationData-Type[0]:1
CommunicationData-Address:http://ABC2159161:50000/rep
CommunicationData-Host:ABC2159161
CommunicationData-Port:50000
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Importing archive:XI7_1_A_SAPPI_CM_1.0_of_ABC.com-objs_6
com.sap.aii.ibtransportclient.XiTransportException: caused by:
>>>rt failed: Internal error when importing object [Lcom.sap.a
>>>aused by: com.sap.aii.utilxi.misc.api.ResourceException: Im
>>>g object [Lcom.sap.aii.ib.bom.workspace.IWorkspace;@7ffc92d
>>>ethodFault: caused by: ClientServerException exception:Impo
>>>object [Lcom.sap.aii.ib.bom.workspace.IWorkspace;@7ffc92d c
>>>sourceException: Import failed: Internal error when importi
>>>IWorkspace;@7ffc92d
End CommunicationData-Type[0]:1
End import with returncode:'8'
Deployment
End date and time : 20111009003401
Ended with return code: ===> 8 <===
Thanks,
Nabendu.Hi,
I have already informed Basis about these. But do we have any way to check the exact reason for this failure?
All the above points can ensure the successful transport to Production or not, I am not sure.
Thanks,
Nabendu. -
Failed to send email report ,The transport failed to connect to the server
HI i have to automate my report using sub
1.I have configured SMTP server in the configuration settings
2. I have created subscitption using my report,But i here i will found one error.
Please find the
failed to send email report ,The transport failed to connect to the server
and can u please help me out for this
when i check in the loge files it will show this error below
No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ;I have change the settings as u suggested but still not able to send the mail .
its shows me the same error mesg
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__02_10_2015_03_44_06.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>10420</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!28d0!02/10/2015-03:44:06:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!28d0!02/10/2015-03:44:06:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!28d0!02/10/2015-03:44:06:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!28f4!02/10/2015-03:44:06:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!28d0!02/10/2015-03:44:06:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!28f4!02/10/2015-03:44:06:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!28f4!02/10/2015-03:44:06:: i INFO: Recycling the service from the default domain
rshost!rshost!28f4!02/10/2015-03:44:17:: i INFO: Application domain type WindowsService statistics: created: 10, unloaded: 10, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:17:: i INFO: Appdomain:12 WindowsService_10 started.
library!WindowsService_10!28f4!02/10/2015-03:44:17:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_10!28f4!02/10/2015-03:44:17:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_10!28f4!02/10/2015-03:44:18:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_9!28f4!02/10/2015-03:44:18:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:18:: i INFO: Appdomain:11 unregistered.
appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:18:: i INFO: Appdomain:11 WindowsService_9 unloading.
appdomainmanager!DefaultDomain!e24!02/10/2015-03:44:18:: i INFO: AppDomain:11 0 pending unload(s)
library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!1ca8!02/10/2015-10:55:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
This is my Logfile can u pls go through it and resolve my issue. -
Failure sending mail: The transport failed to connect to the server.
Hi I have created Emailsubscription first time in my production server ,am facing this issue ,subscription were not created ,its shows me the follwing error.We did everything fine.
HI I have Configured Configuration settings properly ,
I have did the sMTP settings correctly,
I have facing this error since a long while.
Failure sending mail: The transport failed to connect to the server.
In my log file i have found these are the errors and warnings.
1.library!DefaultDomain!3738!04/23/2015-12:28:38:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
2.library!DefaultDomain!3738!04/23/2015-12:28:38:: w WARN: Initializing UrlRoot to default value of '' because it was incorrectly specified in Configuration file as ''.
3.notification!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error occured processing subscription 3efe998d-0c40-460e-bc13-00f6c8d0a7f8: Failure sending mail: The transport failed to connect to the server.
4.emailextension!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error sending email. System.Runtime.InteropServices.COMException (0x80040213): The transport failed to connect to the server.
5. library!ReportServer_0-4!2368!04/23/2015-12:52:30:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
6.extensionfactory!ReportManager_0-3!1224!04/23/2015-12:52:31:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
7.library!ReportServer_0-2!331c!04/23/2015-12:25:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
please go through this errors and give me the right soluction to this..
Awaitng for your reply'sHi Ychinnari,
According to your description, the subscription is failed to send an email with error “Failure sending mail: The transport failed to connect to the server.”.
In your scenario, though you have mentioned you have configured the SMTP and E-mail delivery correctly, please also check those settings according to official documents below to avoid small mistakes:
How to: Configure a Report Server for E-mail Delivery (Reporting Services Configuration)
How to Use Telnet to Test SMTP Communication
Also please check if you have specified the correct E-mail Settings in Report Server Configuration Manager refer to this article:
E-mail Settings - Configuration Manager (SSRS Native Mode).
Finally, please check if you have installed an antivirus on the SSRS server. And check if any firewall role blocks the connection between report server and SMTP.
Reference:
Failure sending mail: The transport failed to connect to the server
SCOM: Report Subscription “Failure sending mail: The transport failed to connect to the server”
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
when im try to transport the transformation 0S4ZGZ1CWX5HY64U0A12A43URH8M1C2Q
it failed with an error below.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 0S4ZGZ1CWX5HY64U0A12A43URH8M1C2Q
No rule exists
Source CUBE ZAOP_T91 does not exist
when i check with the cube ZAOP_T91 in target system (it is active).
the transformation( 0S4ZGZ1CWX5HY64U0A12A43URH8M1C2Q) is also active in target system .
target cube for the above tran is also active.
my question is ,y do i get this error while transporting ??Hi
Please check the consistancy of the all the objects which are in quality.. they look green but it may have error.
and also by chance did you deleted the transformation in development
ok
check this notes below
1082186 - Transport error (transformation): No auth. for object
Note 1145554 - BI7.0 (SP 18) OBJECTS_OBJREF_NOT_ASSIGNED during transport
hope this helps
santosh -
Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics
Dear Experts,
I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
In BI Dev, I use the option Necessary Object.
While importing request into BI QA, it fails with a return code 12. Some of the errors are:
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
System error in lock management
Error AD 025 during after import handling of objects with type(s) IOBJ
Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
InfoObject 0ABCINDIC is not available in active version
InfoObject 0ABCPRC_TYP is not available in active version
InfoObject 0ABCPROCESS is not available in active version
InfoObject 0ACCT_TYPE is not available in active version
InfoObject 0ACTIONREAS is not available in active version
This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
But they are 'ACTIVE' in BI Dev.
Please help me in resolving this issue.
Thanks and BR,
Raj JainHi I.R.K,
I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
Any ideas what may be the cause???
Thanks,
Raj Jain -
Hello
While importing communication strcture & infosource ZMM_0CUST_SALES_ATTR
we got error 8 saying "There is no DataSource with these attributes
Reference to transfer structure 80CUST_SALESM_AA not available.
No activation possible."
Then we have included the data source and again tried to import it
but got the same error. Following are objects in transport.
Communication structure : ZMM_0CUST_SALES_ATTR
InfoSource transaction data : ZMM_0CUST_SALES_ATTR
Transfer structure : 80CUST_SALESM_AA
DataSource (Active Version) : 80CUST_SALESM
Thanks
SundarHi,
Thanks for the prompt reply. Yes, I had successfully imported a request in BQ2 containing the characteristic 0Cust_sales. Only after importing this characteristic I tried the in problem request which was meant to Activate the the Transfer structure of the infoobject which uses 0cust_sales as datasource.
I found a SAP note suggesting a program which fixes the after import issues(RSDG_AFTER_IMPORT_FOR_CORR) but I am not sure it will work.
I dont want the request to fail again when I move it into production.
All your help is highly appreciated.
Many Thanks
Sundar -
CMS transport fails in assembly phase
When I want to transport XI content using CMS I get the following error(s). Anyone an idea what is the cause?
#1.5#0017087CAB7000580000016F00002462000455092F0C879D#1219397848940#com.sap.cms.pcs.conf.core.plugin.DefaultTrack#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.conf.core.plugin.DefaultTrack#LSADMIN#89#SAP J2EE Engine JTA Transaction : [032fffffff0ffffffd2003ffffff87]#sapxid.xxxx.nl_XID_3338450#LSADMIN#b6b18770702d11dd96280017087cab70#ID\#(sapxid_XID_00)ID1741549650DB10797241521631854125End.b6b223b0702d11ddc5b20017087cab70##0#0#Error#1#/Applications/CMS/PCS#Plain###Can't find Build Server#
#1.5#0017087CAB7000580000017100002462000455092F57C937#1219397853873#com.sap.cms.pcs.conf.communicator.XIConfCommunicator#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.conf.communicator.XIConfCommunicator#LSADMIN#89#SAP J2EE Engine JTA Transaction : [032fffffff0ffffffd2003ffffff87]#sapxid.xxxx.nl_XID_3338450#LSADMIN#b6b18770702d11dd96280017087cab70#ID\#(sapxid_XID_00)ID1741549650DB10797241521631854125End.b6b223b0702d11ddc5b20017087cab70##0#0#Error#1#/Applications/CMS/PCS#Plain###Can't register Workspace - Component used from Workspace XID_XIDIR_D_sap.com_SRM_SERVER#
#1.5#0017087CAB7000580000017300002462000455092F58FCF0#1219397853951#com.sap.cms.pcs.conf.manager.CmsConfManager#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.conf.manager.CmsConfManager#LSADMIN#89#SAP J2EE Engine JTA Transaction : [032fffffff0ffffffd2003ffffff87]#sapxid.xxxx.nl_XID_3338450#LSADMIN#b6b18770702d11dd96280017087cab70#ID\#(sapxid_XID_00)ID1741549650DB10797241521631854125End.b6b223b0702d11ddc5b20017087cab70##0#0#Error#1#/Applications/CMS/PCS#Plain###Edit track (XID/XIDIR) configuration failed#
#1.5#0017087CAB7000580000017400002462000455092F5D46CD#1219397854231#com.sap.engine.services.ejb#sap.com/tcwddispwda#com.sap.engine.services.ejb#LSADMIN#89##sapxid.xxxx.nl_XID_3338450#LSADMIN#b6b18770702d11dd96280017087cab70#ID\#(sapxid_XID_00)ID1741549650DB10797241521631854125End.b6b223b0702d11ddc5b20017087cab70##0#0#Error##Java###
[EXCEPTION]
#1#com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method editTrackConfiguration.
Caused by: com.sap.cms.util.exception.conf.CMSCXISCRegException: XI (URL http://sapxid.xxxx.nl:50000/dir/) server exception: Software Component (Vendor/Name/Release: abiosystems.com/xxxx_APPLIEDBIOSYSTEMS/1.0) is already registered in an other track (Domain/TrackID: XID[CMS Server URL: http://sapxid.xxxx.nl:50000]/XIDIR)
#1.5#0017087CAB70004E00000055000024620004550A6D47589C#1219403188042#com.sap.cms.tcs.client.XICommunicator#sap.com/tcSLCMS~PCS#com.sap.cms.tcs.client.XICommunicator#LSADMIN#124##sapxid.xxxx.nl_XID_3338450#LSADMIN#a14bbb30703711dd81270017087cab70#ID\#(sapxid_XID_00)ID1976295650DB10747682777767230031End.a14c5770703711dda7160017087cab70##0#0#Error#1#/Applications/TCSDeployer#Plain###XiTransportException received Exc=com.sap.aii.ibtransportclient.XiTransportException:
ClientServerException exception:Workspace XID_XIDIR_C_abiosystems.com_xxxx_APPLIEDBIOSYSTEMS has not yet been registered
com.sap.aii.utilxi.misc.api.ResourceException: Workspace XID_XIDIR_C_abiosystems.com_xxxx_APPLIEDBIOSYSTEMS has not yet been registeredDid you cross check whether the target business systems are present on the target system and the source system defines then target systems (in SLD).
You might want to check this -
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/soa/soa-management/process-integration/accessing%20master%20data%20management%20web%20services%20through%20process%20integration.pdf
VJ
Maybe you are looking for
-
My laptop has been in the apple store to be fixed more times in the past 2 years then you could imagine. They just replaced a defective wire in it, and hardrive not even a month ago and now the screen just went black and wont turn back on. Also is th
-
Mac Mini distored image on wake from sleep with HD TV
I've got a Mac Mini that does this when it wakes from sleep: http://www.youtube.com/watch?v=AlqYc8qH7ps The image is distorted for several minutes and eventually corrects itself. It happened in 10.6 and now happens in 10.7, it's actually worse in 10.
-
Hello Setting up a mixed PC and iMac wireless network. PC connects fine. Set encryption to WEP 128 and away we go. Mac sees the secure network but will not connect. Have tried inputting the WEP key in both hex and plain format but it just errors. Res
-
Page ranges in table of contents in CD2
I am using CS2. I am working on a directory, and we are putting in an alphabetised listing table of contents. Some of the listings are on more than one page, so I end up with two entries with two different page numbers, like this: read this heading 1
-
Offline/Online Edit for xdcam footage
I am using Sony F3 camera and Sony FS100 footage with final cut 7. Both have different format, One use XDCAM and other use AVCHD. I didn't have any problem transcoding F3 footage in its native form and FS100 footage in Prores LT for offline edit. I w